Arch Linux

sbabbi

Member

Registered: 2014-01-28

Posts: 1

USB/MTP problem with htc one mini

Hi,

I have an HTC one mini phone (android 4.4.2); whenever I try to plug it in to my laptop via usb, I get some weird errors, not really sure what is going on, but basically I can not access it. If I connect it while I am logged in into KDE, I get the "available devices" popup with 5-6 unnamed devices, and it "resets" every second.

If I try without being logged in into a KDE session, I get the same messages from dmesg, but the usb device does not get resetted. In this case I can use mtp-detect, and I get a decent output interleaved with `cdm_acm` messages. Any other mtp releated command (like mtp-filetree) does not produce any output and has to be interrupted.

Thank you for your help!

uname -r
3.17.6-1-ARCH

pacman -Q libmtp
libmtp 1.1.8-1

dmesg
usb 3-2.4: new high-speed USB device number 15 using xhci_hcd
usb 3-2.4: Device not responding to setup address.
usb 3-2.4: Device not responding to setup address.
usb 3-2.4: device not accepting address 15, error -71
usb 3-2.4: new high-speed USB device number 17 using xhci_hcd
usb-storage 3-2.4:1.2: USB Mass Storage device detected
scsi host8: usb-storage 3-2.4:1.2
cdc_acm 3-2.4:1.3: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-2.4:1.3: ttyACM0: USB ACM device
usb 3-2.4: usbfs: process 781 (ThreadWeaver::T) did not claim interface 0 before use
usb 3-2.4: reset high-speed USB device number 17 using xhci_hcd
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 16.
usb 3-2.4: hub failed to enable device, error -22
cdc_acm 3-2.4:1.3: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-2.4:1.3: ttyACM0: USB ACM device
usb 3-2.4: USB disconnect, device number 17
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a1bd1d48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a1bd1d00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801eb970f48
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a1bd1d90
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caf7edc8
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801eb970f00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caf7ee88
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caf7ed80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caf7ee40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021687ef00
usb 3-2.4: new high-speed USB device number 18 using xhci_hcd
cdc_acm 3-2.4:1.3: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-2.4:1.3: ttyACM0: USB ACM device
usb 3-2.4: usbfs: process 792 (ThreadWeaver::T) did not claim interface 0 before use
usb 3-2.4: reset high-speed USB device number 18 using xhci_hcd
.... (repeated over and over)

fdservices

Member

From: France

Registered: 2012-02-06

Posts: 413

Re: USB/MTP problem with htc one mini

Have you tried kdeconnect?

Andrew