You are not logged in.

Pages: 1

#1 2014-12-22 12:18:38

splash
Member
Registered: 2014-12-22
Posts: 5

No sound after rebooting from windows

I lost my audio after performing pacman -Syu.

System specs:
GIGABYTE GA-H97-D3H
Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz
Realtek ALC1150
Desktop Cinammon

So far I have downgraded my kernel to 3.16.1-1 from 3.17.6-1 and still no joy. When playing a video with the volume very high I here crackling noises. I've tried the wiki alsa & pa troubleshooting with no luck. Rebooting to windows I get sound and booting a live distro (ubuntu) I get sound.

Any help will be appreciated.

TIA,

Splash

Last edited by splash (2014-12-23 22:53:48)

Offline

#2 2014-12-22 16:22:16

fdservices
Member
From: France
Registered: 2012-02-06
Posts: 413

Re: No sound after rebooting from windows

You will need to do some investigation and try to give some more details. Are you using pulseaudio?
What is the sound chip? 

$ lspci | grep Audio

Any entries in the journal

# journalctl -b --no-pager | grep audio

Is the correct module loaded

$ lsmod | grep snd

Andrew

Offline

#3 2014-12-22 16:52:00

splash
Member
Registered: 2014-12-22
Posts: 5

Re: No sound after rebooting from windows

thank you for the post

Yes running pulseaudio (gnome & cinammon desktops are installed). My sound card is a Realtek ALC1150.

lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1)
 journalctl -b --no-pager | grep audio
Dec 22 01:58:31 titan-arch pulseaudio[615]: GetManagedObjects() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
Dec 22 01:58:31 titan-arch pulseaudio[642]: [pulseaudio] pid.c: Daemon already running.
Dec 22 01:58:49 titan-arch pulseaudio[615]: ALSA woke us up to write new data to the device, but there was actually nothing to write!
Dec 22 01:58:49 titan-arch pulseaudio[615]: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
Dec 22 01:58:49 titan-arch pulseaudio[615]: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail.
lsmod | grep snd
snd_hda_codec_hdmi     45117  4 
snd_hda_codec_realtek    67127  1 
snd_hda_codec_generic    63126  1 snd_hda_codec_realtek
snd_hda_intel          26327  3 
snd_hda_controller     26727  1 snd_hda_intel
snd_hda_codec         108552  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep              17244  1 snd_hda_codec
snd_pcm                88487  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer              26614  1 snd_pcm
snd                    69340  14 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore              13031  2 snd,snd_hda_codec

Offline

#4 2014-12-22 17:19:21

fdservices
Member
From: France
Registered: 2012-02-06
Posts: 413

Re: No sound after rebooting from windows

This looks interesting:

ALSA woke us up to write new data to the device, but there was actually nothing to write

There is a bug report at https://bugs.archlinux.org/task/39186 which refers to a fforum topic at https://bbs.archlinux.org/viewtopic.php?id=177979
One suggested fix is

Editing /etc/pulse/daemon.conf adding the line:

default-fragment-size-msec = 5

But first I suggest that you do a full system update 

# pacman -Syu

PS I see two audio controllers, but no Realtek, you seem to be using the Intel one, but maybe I misunderstood.

Hope this helps.

Andrew

Offline

#5 2014-12-22 17:34:11

splash
Member
Registered: 2014-12-22
Posts: 5

Re: No sound after rebooting from windows

Thanks again for the post. I did pacman -Syu yesterday before downgrading my kernel today with same results, no sound. I'm going to reboot again to live distro and see if the lspci gives same output this evening (@work). Maybe udev being overly helpful, I'll also try editing default-fragment-size-msec = 5 and restart pulse.

I'll post my results,
Splash

Offline

#6 2014-12-22 19:20:14

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 19,801

Re: No sound after rebooting from windows

Could you post the output of aplay -lL   ? (That is a lower case L followed by an upper case L)

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#7 2014-12-23 01:30:22

splash
Member
Registered: 2014-12-22
Posts: 5

Re: No sound after rebooting from windows

aplay -lL
null
    Discard all samples (playback) or generate zero samples (capture)
pulse
    PulseAudio Sound Server
sysdefault:CARD=PCH
    HDA Intel PCH, ALC1150 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC1150 Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC1150 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC1150 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC1150 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC1150 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC1150 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC1150 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
    HDA Intel PCH, ALC1150 Digital
    IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 0
    HDMI Audio Output
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC1150 Analog [ALC1150 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC1150 Digital [ALC1150 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Last edited by splash (2014-12-23 01:41:55)

Offline

#8 2014-12-23 01:35:50

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: No sound after rebooting from windows

Please use code tags when pasting to the boards https://wiki.archlinux.org/index.php/Fo … s_and_Code

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#9 2014-12-23 02:34:46

splash
Member
Registered: 2014-12-22
Posts: 5

Re: No sound after rebooting from windows

I have sound!
The Fix, completely power of machine, Power on. Not a clue why or where to look but it happens after rebooting to windows (not something I do very often, no time for games).

Reference: https://bugs.launchpad.net/ubuntu/+sour … ug/1357723
look at comment 20.

HTH someone else,

Splash

Offline

Pages: 1

Board footer

Powered by FluxBB