You are not logged in.
Hi, just got this new Qnix 1440p monitor... I discovered, when I tried to use it on Linux, that it doesn't have an EDID. When I first tried booting Linux with this screen, I would get a black screen with no cursor when the display manager (lightdm) started up. I got this to work after changing my /etc/X11/xorg.conf to look like this:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 343.22 (buildmeister@swio-display-x86-rhel47-05) Thu Sep 11 16:49:51 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "QNIX"
ModelName "QX2710"
DisplaySize 597 336
HorizSync 88.8 - 160.0
VertRefresh 59.5 - 120.0
Option "DPMS"
Modeline "2560x1440" 241.50 2560 2608 2640 2720 1440 1443 1448 1481
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "UseEDID" "False"
Option "UseEDIDDPI" "False"
Option "UseEDIDFreqs" "False"
Option "ExactModeTimingsDVI" "True"
Option "ModeValidation" "AllowNonEdidModes, AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes"
Option "NoBandWidthTest" "True"
SubSection "Display"
Depth 24
Modes "2560x1440"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "layout0"
Screen 0 "Screen0" 0 0
Option "Xinerama" "0"
EndSectionAfter changing my xorg.conf everything seems to work on the display manager with the gtk3 lightdm greeter, and also on the cinnamon desktop environment -- But i now get the same black screen with no cursor when I try to start gnome 3.
Offline
Could you post some more details?
- How you startx (auto, or boot to command prompt and do so manually)?
- Do you boot with the monitor connected to try to switch to it after startx (and are you using a laptop or desktop?)?
- Contents of ~/.xinitrc
- Graphics card/installed driver(s)
- Output of /var/log/Xorg.0.log after a failed attempt
- Have you tried with no /etc/xorg.conf?
If this is a laptop, one thought would be to try xrandr if you haven't already. You might be able to see details about how the monitor is picked up by simply running
$ xrandrIf you have another monitor or this is a laptop, you could then try mirroring/extending for starters, say with:
$ xrandr --output [ID-OF-MONITOR] --autoI see no one has responded yet, so I thought I'd chime in with some ideas for additional input others can look at and hopefully help you out.
Offline
Driver version: NVIDIA-SMI 343.36
Rig: desktop with GTX780 CLASSIFIED, AMD 8350 black edition, Gigabyte 990fxa-ud3 motherboard.
I startx automatically, so a display manager (with graphical greeter) appears after I boot -- which is strange because I'm using the gtk3 lightdm greeter which works fine, so shouldn't gnome work fine as well?
I boot with my monitor connected.
I need to startx with etc/X11/xorg.conf because the screen does not supply an EDID to the x server, otherwise I have to resort to software rendering.
Offline
xorg.log.0.old :
[ 1096.194]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 1096.194] X Protocol Version 11, Revision 0
[ 1096.194] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 1096.194] Current Operating System: Linux Zero 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 1096.194] Kernel command line: \EFI\arch\vmlinuz-linux ro root=PARTUUID=dd0a8115-b2a4-426c-83a8-b5689a3bbce6 nomodeset initrd=EFI\arch\initramfs-linux-fallback.img
[ 1096.194] Build Date: 29 December 2014 01:09:58PM
[ 1096.194]
[ 1096.194] Current version of pixman: 0.32.6
[ 1096.194] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1096.194] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1096.194] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 3 21:35:58 2015
[ 1096.194] (==) Using config file: "/etc/X11/xorg.conf"
[ 1096.194] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1096.195] (==) ServerLayout "Layout0"
[ 1096.195] (**) |-->Screen "Screen0" (0)
[ 1096.195] (**) | |-->Monitor "Monitor0"
[ 1096.195] (**) | |-->Device "Device0"
[ 1096.195] (**) |-->Input Device "Keyboard0"
[ 1096.195] (**) |-->Input Device "Mouse0"
[ 1096.195] (==) Automatically adding devices
[ 1096.195] (==) Automatically enabling devices
[ 1096.195] (==) Automatically adding GPU devices
[ 1096.195] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1096.195] Entry deleted from font path.
[ 1096.195] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1096.195] Entry deleted from font path.
[ 1096.195] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1096.195] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1096.195] Entry deleted from font path.
[ 1096.195] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1096.195] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1096.195] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1096.195] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1096.195] (WW) Disabling Keyboard0
[ 1096.195] (WW) Disabling Mouse0
[ 1096.195] (II) Loader magic: 0x818d80
[ 1096.195] (II) Module ABI versions:
[ 1096.195] X.Org ANSI C Emulation: 0.4
[ 1096.195] X.Org Video Driver: 18.0
[ 1096.195] X.Org XInput driver : 21.0
[ 1096.195] X.Org Server Extension : 8.0
[ 1096.197] (EE) systemd-logind: failed to get session: PID 1660 does not belong to any known session
[ 1096.197] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1096.200] (--) PCI:*(0:1:0:0) 10de:1004:3842:1788 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 1096.200] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1096.200] (II) LoadModule: "glx"
[ 1096.200] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1096.214] (II) Module glx: vendor="NVIDIA Corporation"
[ 1096.214] compiled for 4.0.2, module version = 1.0.0
[ 1096.214] Module class: X.Org Server Extension
[ 1096.214] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 1096.214] (II) LoadModule: "nvidia"
[ 1096.214] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1096.215] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1096.215] compiled for 4.0.2, module version = 1.0.0
[ 1096.215] Module class: X.Org Video Driver
[ 1096.215] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[ 1096.215] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1096.215] (++) using VT number 1
[ 1096.215] (II) Loading sub module "fb"
[ 1096.215] (II) LoadModule: "fb"
[ 1096.215] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1096.215] (II) Module fb: vendor="X.Org Foundation"
[ 1096.215] compiled for 1.16.3, module version = 1.0.0
[ 1096.215] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1096.215] (II) Loading sub module "wfb"
[ 1096.215] (II) LoadModule: "wfb"
[ 1096.215] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1096.215] (II) Module wfb: vendor="X.Org Foundation"
[ 1096.215] compiled for 1.16.3, module version = 1.0.0
[ 1096.215] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1096.215] (II) Loading sub module "ramdac"
[ 1096.215] (II) LoadModule: "ramdac"
[ 1096.215] (II) Module "ramdac" already built-in
[ 1096.216] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 1096.216] (==) NVIDIA(0): RGB weight 888
[ 1096.216] (==) NVIDIA(0): Default visual is TrueColor
[ 1096.216] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1096.216] (**) NVIDIA(0): Option "NoLogo"
[ 1096.216] (**) NVIDIA(0): Option "UseEdidFreqs" "False"
[ 1096.216] (**) NVIDIA(0): Option "ExactModeTimingsDVI" "True"
[ 1096.216] (**) NVIDIA(0): Option "UseEdidDpi" "False"
[ 1096.216] (**) NVIDIA(0): Option "ModeValidation" "AllowNonEdidModes, AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes"
[ 1096.216] (**) NVIDIA(0): Option "UseEDID" "False"
[ 1096.216] (**) NVIDIA(0): Enabling 2D acceleration
[ 1096.216] (**) NVIDIA(0): Ignoring EDIDs
[ 1096.863] (II) NVIDIA(0): Not probing EDID on DFP-3.
[ 1096.863] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 1096.864] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 780 (GK110) at PCI:1:0:0 (GPU-0)
[ 1096.864] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 1096.864] (--) NVIDIA(0): VideoBIOS: 80.80.31.01.80
[ 1096.864] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1096.878] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 780 at PCI:1:0:0
[ 1096.878] (--) NVIDIA(0): CRT-0
[ 1096.878] (--) NVIDIA(0): DFP-0
[ 1096.878] (--) NVIDIA(0): DFP-1
[ 1096.878] (--) NVIDIA(0): DFP-2
[ 1096.878] (--) NVIDIA(0): DFP-3 (boot, connected)
[ 1096.878] (--) NVIDIA(0): DFP-4
[ 1096.878] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 1096.878] (--) NVIDIA(0): DFP-0: Internal TMDS
[ 1096.878] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 1096.878] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 1096.878] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 1096.878] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 1096.878] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 1096.878] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 1096.878] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 1096.878] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 1096.878] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 1096.878] (**) NVIDIA(0): Not using HorizSync/VertRefresh ranges from the EDID for
[ 1096.878] (**) NVIDIA(0): display device DFP-3 (Using EDID frequencies has been
[ 1096.878] (**) NVIDIA(0): disabled on all display devices.)
[ 1096.878] (WW) NVIDIA(GPU-0): Unrecognized ModeValidation token "AllowNon60hzmodesDFPModes";
[ 1096.878] (WW) NVIDIA(GPU-0): ignoring.
[ 1096.878] (WW) NVIDIA(GPU-0): Unrecognized ModeValidation token "NoEDIDDFPMaxSizeCheck";
[ 1096.878] (WW) NVIDIA(GPU-0): ignoring.
[ 1096.878] (WW) NVIDIA(GPU-0): Unrecognized ModeValidation token
[ 1096.878] (WW) NVIDIA(GPU-0): "NoDFPNativeResolutionCheck"; ignoring.
[ 1096.878] (II) NVIDIA(GPU-0): Mode Validation Overrides for DFP-3:
[ 1096.878] (II) NVIDIA(GPU-0): NoMaxPClkCheck
[ 1096.878] (II) NVIDIA(GPU-0): NoMaxSizeCheck
[ 1096.878] (II) NVIDIA(GPU-0): NoHorizSyncCheck
[ 1096.878] (II) NVIDIA(GPU-0): NoVertRefreshCheck
[ 1096.878] (II) NVIDIA(GPU-0): NoEdidModes
[ 1096.879] (II) NVIDIA(GPU-0): AllowNonEdidModes
[ 1096.890] (II) NVIDIA(0): Validated MetaModes:
[ 1096.890] (II) NVIDIA(0): "DFP-3:2560x1440"
[ 1096.890] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[ 1096.935] (**) NVIDIA(0): DPI set to (108, 108); computed from "DisplaySize" Monitor
[ 1096.935] (**) NVIDIA(0): section option
[ 1096.935] (--) Depth 24 pixmap format is 32 bpp
[ 1096.935] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 1096.935] (II) NVIDIA: access.
[ 1096.941] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1096.941] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1096.941] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1096.941] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1096.941] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1096.941] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1096.941] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1096.941] (II) NVIDIA(0): Config Options in the README.
[ 1096.954] (II) NVIDIA(0): Setting mode "DFP-3:2560x1440"
[ 1097.017] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1097.017] (==) NVIDIA(0): Backing store enabled
[ 1097.017] (==) NVIDIA(0): Silken mouse enabled
[ 1097.017] (**) NVIDIA(0): DPMS enabled
[ 1097.018] (WW) NVIDIA(0): Option "NoBandWidthTest" is not used
[ 1097.018] (II) Loading sub module "dri2"
[ 1097.018] (II) LoadModule: "dri2"
[ 1097.018] (II) Module "dri2" already built-in
[ 1097.018] (II) NVIDIA(0): [DRI2] Setup complete
[ 1097.018] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1097.018] (--) RandR disabled
[ 1097.022] (II) Initializing extension GLX
[ 1097.086] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1097.087] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1097.087] (II) LoadModule: "evdev"
[ 1097.087] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1097.087] (II) Module evdev: vendor="X.Org Foundation"
[ 1097.087] compiled for 1.16.2, module version = 2.9.1
[ 1097.087] Module class: X.Org XInput Driver
[ 1097.087] ABI class: X.Org XInput driver, version 21.0
[ 1097.087] (II) Using input driver 'evdev' for 'Power Button'
[ 1097.087] (**) Power Button: always reports core events
[ 1097.088] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 1097.088] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1097.088] (--) evdev: Power Button: Found keys
[ 1097.088] (II) evdev: Power Button: Configuring as keyboard
[ 1097.088] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 1097.088] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1097.088] (**) Option "xkb_rules" "evdev"
[ 1097.088] (**) Option "xkb_model" "pc104"
[ 1097.088] (**) Option "xkb_layout" "us"
[ 1097.113] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 1097.113] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1097.113] (II) Using input driver 'evdev' for 'Power Button'
[ 1097.113] (**) Power Button: always reports core events
[ 1097.113] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 1097.113] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1097.113] (--) evdev: Power Button: Found keys
[ 1097.113] (II) evdev: Power Button: Configuring as keyboard
[ 1097.113] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 1097.113] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1097.114] (**) Option "xkb_rules" "evdev"
[ 1097.114] (**) Option "xkb_model" "pc104"
[ 1097.114] (**) Option "xkb_layout" "us"
[ 1097.115] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 1097.115] (II) No input driver specified, ignoring this device.
[ 1097.115] (II) This device may have been added with another device file.
[ 1097.115] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 1097.115] (II) No input driver specified, ignoring this device.
[ 1097.115] (II) This device may have been added with another device file.
[ 1097.116] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[ 1097.116] (II) No input driver specified, ignoring this device.
[ 1097.116] (II) This device may have been added with another device file.
[ 1097.116] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)
[ 1097.116] (II) No input driver specified, ignoring this device.
[ 1097.116] (II) This device may have been added with another device file.
[ 1097.117] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event2)
[ 1097.117] (II) No input driver specified, ignoring this device.
[ 1097.117] (II) This device may have been added with another device file.
[ 1097.117] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event3)
[ 1097.117] (II) No input driver specified, ignoring this device.
[ 1097.117] (II) This device may have been added with another device file.
[ 1097.117] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 1097.118] (II) No input driver specified, ignoring this device.
[ 1097.118] (II) This device may have been added with another device file.
[ 1097.118] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event5)
[ 1097.118] (II) No input driver specified, ignoring this device.
[ 1097.118] (II) This device may have been added with another device file.
[ 1097.118] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event6)
[ 1097.118] (II) No input driver specified, ignoring this device.
[ 1097.118] (II) This device may have been added with another device file.
[ 1097.119] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event7)
[ 1097.119] (II) No input driver specified, ignoring this device.
[ 1097.119] (II) This device may have been added with another device file.
[ 1097.119] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event8)
[ 1097.119] (II) No input driver specified, ignoring this device.
[ 1097.119] (II) This device may have been added with another device file.
[ 1097.120] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
[ 1097.120] (II) No input driver specified, ignoring this device.
[ 1097.120] (II) This device may have been added with another device file.
[ 1097.120] (II) config/udev: Adding input device Razer Razer Abyssus (/dev/input/event12)
[ 1097.121] (**) Razer Razer Abyssus: Applying InputClass "evdev pointer catchall"
[ 1097.121] (II) Using input driver 'evdev' for 'Razer Razer Abyssus'
[ 1097.121] (**) Razer Razer Abyssus: always reports core events
[ 1097.121] (**) evdev: Razer Razer Abyssus: Device: "/dev/input/event12"
[ 1097.121] (--) evdev: Razer Razer Abyssus: Vendor 0x1532 Product 0x1c
[ 1097.121] (--) evdev: Razer Razer Abyssus: Found 11 mouse buttons
[ 1097.121] (--) evdev: Razer Razer Abyssus: Found scroll wheel(s)
[ 1097.121] (--) evdev: Razer Razer Abyssus: Found relative axes
[ 1097.121] (--) evdev: Razer Razer Abyssus: Found x and y relative axes
[ 1097.121] (II) evdev: Razer Razer Abyssus: Configuring as mouse
[ 1097.121] (II) evdev: Razer Razer Abyssus: Adding scrollwheel support
[ 1097.121] (**) evdev: Razer Razer Abyssus: YAxisMapping: buttons 4 and 5
[ 1097.121] (**) evdev: Razer Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1097.121] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/0003:1532:001C.0001/input/input12/event12"
[ 1097.121] (II) XINPUT: Adding extended input device "Razer Razer Abyssus" (type: MOUSE, id 8)
[ 1097.121] (II) evdev: Razer Razer Abyssus: initialized for relative axes.
[ 1097.121] (**) Razer Razer Abyssus: (accel) keeping acceleration scheme 1
[ 1097.121] (**) Razer Razer Abyssus: (accel) acceleration profile 0
[ 1097.122] (**) Razer Razer Abyssus: (accel) acceleration factor: 2.000
[ 1097.122] (**) Razer Razer Abyssus: (accel) acceleration threshold: 4
[ 1097.122] (II) config/udev: Adding input device Razer Razer Abyssus (/dev/input/mouse0)
[ 1097.122] (II) No input driver specified, ignoring this device.
[ 1097.122] (II) This device may have been added with another device file.
[ 1097.123] (II) config/udev: Adding input device Catz, Inc. TRITTON KUNAI STEREO HEADSET (/dev/input/event13)
[ 1097.123] (**) Catz, Inc. TRITTON KUNAI STEREO HEADSET: Applying InputClass "evdev keyboard catchall"
[ 1097.123] (II) Using input driver 'evdev' for 'Catz, Inc. TRITTON KUNAI STEREO HEADSET'
[ 1097.123] (**) Catz, Inc. TRITTON KUNAI STEREO HEADSET: always reports core events
[ 1097.123] (**) evdev: Catz, Inc. TRITTON KUNAI STEREO HEADSET: Device: "/dev/input/event13"
[ 1097.123] (--) evdev: Catz, Inc. TRITTON KUNAI STEREO HEADSET: Vendor 0x738 Product 0x7359
[ 1097.123] (--) evdev: Catz, Inc. TRITTON KUNAI STEREO HEADSET: Found 1 mouse buttons
[ 1097.123] (--) evdev: Catz, Inc. TRITTON KUNAI STEREO HEADSET: Found keys
[ 1097.123] (II) evdev: Catz, Inc. TRITTON KUNAI STEREO HEADSET: Forcing relative x/y axes to exist.
[ 1097.123] (II) evdev: Catz, Inc. TRITTON KUNAI STEREO HEADSET: Configuring as mouse
[ 1097.123] (II) evdev: Catz, Inc. TRITTON KUNAI STEREO HEADSET: Configuring as keyboard
[ 1097.123] (**) evdev: Catz, Inc. TRITTON KUNAI STEREO HEADSET: YAxisMapping: buttons 4 and 5
[ 1097.123] (**) evdev: Catz, Inc. TRITTON KUNAI STEREO HEADSET: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1097.123] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.3/0003:0738:7359.0002/input/input13/event13"
[ 1097.123] (II) XINPUT: Adding extended input device "Catz, Inc. TRITTON KUNAI STEREO HEADSET" (type: KEYBOARD, id 9)
[ 1097.123] (**) Option "xkb_rules" "evdev"
[ 1097.123] (**) Option "xkb_model" "pc104"
[ 1097.123] (**) Option "xkb_layout" "us"
[ 1097.124] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event11)
[ 1097.124] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1097.124] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1097.124] (**) AT Translated Set 2 keyboard: always reports core events
[ 1097.124] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event11"
[ 1097.124] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1097.124] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1097.124] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1097.124] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input11/event11"
[ 1097.124] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 1097.124] (**) Option "xkb_rules" "evdev"
[ 1097.124] (**) Option "xkb_model" "pc104"
[ 1097.124] (**) Option "xkb_layout" "us"
[ 1097.124] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 1097.124] (II) No input driver specified, ignoring this device.
[ 1097.124] (II) This device may have been added with another device file.
[ 1111.205] (II) NVIDIA(GPU-0): Not probing EDID on DFP-3.
[ 1111.294] (II) NVIDIA(0): Setting mode "NULL"
[ 1111.383] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1024x768 +0+0 {ViewPortIn=1024x768, ViewPortOut=1024x768+0+0}"
[ 1112.310] (II) NVIDIA(GPU-0): Not probing EDID on DFP-3.
[ 1167.561] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1167.561] (II) UnloadModule: "evdev"
[ 1167.561] (II) evdev: Catz, Inc. TRITTON KUNAI STEREO HEADSET: Close
[ 1167.561] (II) UnloadModule: "evdev"
[ 1167.561] (II) evdev: Razer Razer Abyssus: Close
[ 1167.561] (II) UnloadModule: "evdev"
[ 1167.561] (II) evdev: Power Button: Close
[ 1167.562] (II) UnloadModule: "evdev"
[ 1167.562] (II) evdev: Power Button: Close
[ 1167.562] (II) UnloadModule: "evdev"
[ 1167.568] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 1167.572] (EE) Server terminated successfully (0). Closing log file.Offline