You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2015-01-10 16:44:00
- workdowg
- Member
- Registered: 2010-12-31
- Posts: 69
USB 2.0 and 3.0 issues
I'll keep this simple as I know I'll be asked for logs, dmesg, hardware info and such, but don't know exactly what to give right now.
Here are my issues, these have been happening for a long while but I'm just getting frustrated now.
1) USB 2.0 devices and sockets:
whenever I plug in any usb device (thumbdrive, gamepad, android cable...etc) everything stutters and my printer starts warming up. USB works fine after but this is annoying.
2)USB 3.0 device on USB 3.0 socket only:
My system kernel panics and freezes. If I plug it into a USB 2.0 socket it is slow but fine (except the issue above). I have USB 3.0 external HD and a Apricorn USB 3.0 transfer cable that I have tried.
Let me know what to post and I will run through the steps and get what you all need. 
I'm running an up to date XFCE install with no custom kernels or such...
Edit-1: USB 3.0 socket - Plugged in the Apricorn with a HDD connected and my external HDD and niether caused a panic this time. Only issue it the mouse is freezing off and on while they are plugged in. Possibly a kernel or driver update fixed it?
Edit-2:
1) Linux 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64 GNU/Linux
2) PC - h8-1330z
MB - Gigabyte M3970AM-HP (Angelica2)
USB 3.0 - TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller
USB 2.0 - SB7x0/SB8x0/SB9x0 USB EHCI Controller
3) Booting standard defaulted syslinux
Last edited by workdowg (2015-01-10 18:28:20)
Offline
#2 2015-01-10 18:15:56
- nTia89
- Banned
- From: varese, italy
- Registered: 2008-12-22
- Posts: 1,230
Re: USB 2.0 and 3.0 issues
what kernel version do you have?
what motherboard/usb controller do you have?
do you boot with any special parameter?
+pc: custom | AMD Opteron 175 | nForce4 Ultra | 2GB ram DDR400 | nVidia 9800GT 1GB | ArchLinux x86_64 w/ openbox
+laptop: Apple | MacBook (2,1) | 2GB ram | Mac OS X 10.4 -> DIED
+ultrabook: Dell | XPS 13 (9343) | 8GB ram | 256GB ssd | FullHD display | Windows 8.1 64bit ArchLinux x86_64 w/ Gnome
Offline
#3 2015-01-10 18:27:42
- workdowg
- Member
- Registered: 2010-12-31
- Posts: 69
Re: USB 2.0 and 3.0 issues
1) Linux 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64 GNU/Linux
2) PC - h8-1330z
MB - Gigabyte M3970AM-HP (Angelica2)
USB 3.0 - TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller
USB 2.0 - SB7x0/SB8x0/SB9x0 USB EHCI Controller
3) Booting standard defaulted syslinux
Offline
#4 2015-01-10 19:44:36
- nTia89
- Banned
- From: varese, italy
- Registered: 2008-12-22
- Posts: 1,230
Re: USB 2.0 and 3.0 issues
can you post dmesg output after you plug in a USB2 device in the USB2 port ?
Last edited by nTia89 (2015-01-10 19:44:51)
+pc: custom | AMD Opteron 175 | nForce4 Ultra | 2GB ram DDR400 | nVidia 9800GT 1GB | ArchLinux x86_64 w/ openbox
+laptop: Apple | MacBook (2,1) | 2GB ram | Mac OS X 10.4 -> DIED
+ultrabook: Dell | XPS 13 (9343) | 8GB ram | 256GB ssd | FullHD display | Windows 8.1 64bit ArchLinux x86_64 w/ Gnome
Offline
#5 2015-01-10 19:57:22
- workdowg
- Member
- Registered: 2010-12-31
- Posts: 69
Re: USB 2.0 and 3.0 issues
can you post dmesg output after you plug in a USB2 device in the USB2 port ?
plug in
[32385.849916] usb 6-1: new full-speed USB device number 9 using ohci-pci
[32386.017664] input: Logitech Gamepad F310 as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/input/input33
[32386.066766] usb 4-4: usbfs: interface 1 claimed by usblp while 'colord-sane' sets config #1
[32391.960281] usb 4-4: usbfs: process 30876 (colord-sane) did not claim interface 0 before use
[32395.989296] usb 4-4: usbfs: process 30876 (colord-sane) did not claim interface 0 before useunplug
[32479.307244] usb 6-1: USB disconnect, device number 9
[32479.504085] usb 4-4: usbfs: interface 1 claimed by usblp while 'colord-sane' sets config #1
[32484.846921] usb 4-4: usbfs: process 31060 (colord-sane) did not claim interface 0 before useLast edited by workdowg (2015-01-10 19:59:12)
Offline
#6 2015-01-10 20:01:26
- nTia89
- Banned
- From: varese, italy
- Registered: 2008-12-22
- Posts: 1,230
Re: USB 2.0 and 3.0 issues
those lines claim about "colord-sane".
investigate on this information
+pc: custom | AMD Opteron 175 | nForce4 Ultra | 2GB ram DDR400 | nVidia 9800GT 1GB | ArchLinux x86_64 w/ openbox
+laptop: Apple | MacBook (2,1) | 2GB ram | Mac OS X 10.4 -> DIED
+ultrabook: Dell | XPS 13 (9343) | 8GB ram | 256GB ssd | FullHD display | Windows 8.1 64bit ArchLinux x86_64 w/ Gnome
Offline
#7 2015-01-10 21:51:06
- workdowg
- Member
- Registered: 2010-12-31
- Posts: 69
Re: USB 2.0 and 3.0 issues
those lines claim about "colord-sane".
investigate on this information
Really didn't find out too much about it before, that was why I tried posting here. Although a Google search now brings up this thread...
Edit: found this - http://www.cyberwizzard.nl/gentoo-linux … blems.html
I unloaded the module and it still does it:
[39471.441115] usbcore: deregistering interface driver usblp
[39471.441298] usblp1: removed
[39483.157625] usb 6-1: new full-speed USB device number 10 using ohci-pci
[39483.324965] input: Logitech Gamepad F310 as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/input/input34
[39489.230039] usb 4-4: usbfs: process 10643 (colord-sane) did not claim interface 0 before use
[39493.262047] usb 4-4: usbfs: process 10643 (colord-sane) did not claim interface 0 before useI'll try blacklisting it, reboot and see if that works.
Edit-2: Didn't help
[ 9.818796] usb 4-4: usbfs: process 460 (colord-sane) did not claim interface 0 before use
[ 13.859170] usb 4-4: usbfs: process 460 (colord-sane) did not claim interface 0 before use
[ 61.618966] usb 6-1: new full-speed USB device number 2 using ohci-pci
[ 61.815234] input: Logitech Gamepad F310 as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/input/input16
[ 61.815471] usbcore: registered new interface driver xpad
[ 67.251063] usb 4-4: usbfs: process 1077 (colord-sane) did not claim interface 0 before use
[ 71.278990] usb 4-4: usbfs: process 1077 (colord-sane) did not claim interface 0 before useLast edited by workdowg (2015-01-10 22:15:32)
Offline
#8 2015-01-11 08:32:11
- nTia89
- Banned
- From: varese, italy
- Registered: 2008-12-22
- Posts: 1,230
Re: USB 2.0 and 3.0 issues
my last suggestion is looking for an hardware bug. try to search problems with your or similar hardware, even in other forum
+pc: custom | AMD Opteron 175 | nForce4 Ultra | 2GB ram DDR400 | nVidia 9800GT 1GB | ArchLinux x86_64 w/ openbox
+laptop: Apple | MacBook (2,1) | 2GB ram | Mac OS X 10.4 -> DIED
+ultrabook: Dell | XPS 13 (9343) | 8GB ram | 256GB ssd | FullHD display | Windows 8.1 64bit ArchLinux x86_64 w/ Gnome
Offline
Pages: 1