You are not logged in.

Pages: 1

#1 2015-01-16 18:03:16

Soukyuu
Member
Registered: 2014-04-08
Posts: 854

Stuck creating PKGBUILD for a qt5 app - empty package

I saw this and this as well as this, but it doesn't really help.
Here is what I have so far:

[...snip]
prepare() {
  unzip $pkgname-v.$pkgver.zip
}

build() {
  cd "$srcdir/fpTool"
  qmake-qt5 DEFINES+=QT_NO_DEBUG_OUTPUT || return 1
  make || return 1

  cd "$srcdir/rpkTool"
  qmake-qt5 DEFINES+=QT_NO_DEBUG_OUTPUT || return 1
  make || return 1
}
  
package() {
  cd "$srcdir/fpTool"
  local prefix=${pkgdir}/usr/bin
  install -D -m 0655 fpTool ${prefix}/fptool
  
  cd "$srcdir/rpkTool"
  local prefix=${pkgdir}/usr/bin
  install -D -m 0655 rpkTool ${prefix}/rpktool 
}

This corresponds to the solution in the third thread (the case change on install is intended btw)

Everything builds fine, but I'm getting an empty package. The executables land in src/fpTool and src/rpkTool respectively. This is the same for all three approaches I tried, for the first two I'm getting "nothing to do for install".
I never wrote a PKGBUILD before, so I'm mostly trying to copy how others did things, but so far it hasn't worked out.

Any suggestions? Those are really just two executables I want to be able to install (planning to add more when I finish writing them). I could of course just use them without installing, but I wanted to do it the "clean" way.

[ Arch x86_64 | linux | Framework 13 | AMD Ryzen™ 5 7640U | 32GB RAM | KDE Plasma Wayland ]

Offline

#2 2015-01-16 19:12:16

Scimmia
Fellow
Registered: 2012-09-01
Posts: 11,544

Re: Stuck creating PKGBUILD for a qt5 app - empty package

Since you didn't quote any of the paths with variable, are you building in a dir with a space in the path?

Why are you defining a variable "prefix" at all?

Offline

#3 2015-01-16 21:32:25

Soukyuu
Member
Registered: 2014-04-08
Posts: 854

Re: Stuck creating PKGBUILD for a qt5 app - empty package

Defining the prefix was just my attempt at copying the third link. I'm building it in

/data/Share/Temp/pkg/src/

so no spaces.

Is there a "proven" way of qmake-based PKGBUILDs? The tools don't have any dependencies except qt5, so I expected the PKGBUILD to be something along the lines of

build(){
cd srcdir/of/tool1
qmake
make

cd srcdir/of/tool2
qmake
make
}
package(){
cd srcdir/of/tool1
make install

cd srcdir/of/tool1
make install
}

But this naive way of doing it produces an empty package as well ("nothing to do for install"), so I'm probably thinking wrong somewhere.
I'm not sure if posting the Makefile produced by qmake is of any use, but here is one of them:

#############################################################################
# Makefile for building: fpTool
# Generated by qmake (3.0) (Qt 5.4.0)
# Project:  fpTool.pro
# Template: app
# Command: /usr/sbin/qmake-qt5 DEFINES+=QT_NO_DEBUG_OUTPUT -o Makefile fpTool.pro
#############################################################################

MAKEFILE      = Makefile

####### Compiler, tools and options

CC            = gcc
CXX           = g++
DEFINES       = -DQT_NO_DEBUG_OUTPUT -DAPP_VERSION="\"1.1.1.0\"" -DQT_NO_DEBUG -DQT_CORE_LIB
CFLAGS        = -pipe -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -D_REENTRANT -fPIE $(DEFINES)
CXXFLAGS      = -pipe -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -D_REENTRANT -fPIE $(DEFINES)
INCPATH       = -I/usr/lib/qt/mkspecs/linux-g++ -I. -isystem /usr/include/qt -isystem /usr/include/qt/QtCore -I.
QMAKE         = /usr/sbin/qmake-qt5
DEL_FILE      = rm -f
CHK_DIR_EXISTS= test -d
MKDIR         = mkdir -p
COPY          = cp -f
COPY_FILE     = cp -f
COPY_DIR      = cp -f -R
INSTALL_FILE  = install -m 644 -p
INSTALL_PROGRAM = install -m 755 -p
INSTALL_DIR   = $(COPY_DIR)
DEL_FILE      = rm -f
SYMLINK       = ln -f -s
DEL_DIR       = rmdir
MOVE          = mv -f
TAR           = tar -cf
COMPRESS      = gzip -9f
DISTNAME      = fpTool1.1.1.0
DISTDIR = /data/Share/Temp/pkg/src/fpTool/.tmp/fpTool1.1.1.0
LINK          = g++
LFLAGS        = -Wl,-O1,--sort-common,--as-needed,-z,relro -Wl,-O1
LIBS          = $(SUBLIBS) -lQt5Core -lpthread 
AR            = ar cqs
RANLIB        = 
SED           = sed
STRIP         = strip

####### Output directory

OBJECTS_DIR   = ./

####### Files

SOURCES       = main.cpp 
OBJECTS       = main.o
DIST          = /usr/lib/qt/mkspecs/features/spec_pre.prf \
		/usr/lib/qt/mkspecs/common/shell-unix.conf \
		/usr/lib/qt/mkspecs/common/unix.conf \
		/usr/lib/qt/mkspecs/common/linux.conf \
		/usr/lib/qt/mkspecs/common/gcc-base.conf \
		/usr/lib/qt/mkspecs/common/gcc-base-unix.conf \
		/usr/lib/qt/mkspecs/common/g++-base.conf \
		/usr/lib/qt/mkspecs/common/g++-unix.conf \
		/usr/lib/qt/mkspecs/qconfig.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_bootstrap_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_concurrent.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_concurrent_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_core.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_core_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_dbus.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_dbus_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_gui.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_gui_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_network.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_network_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_opengl.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_opengl_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_openglextensions.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_openglextensions_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_platformsupport_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_printsupport.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_printsupport_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_sql.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_sql_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_testlib.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_testlib_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_widgets.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_widgets_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_xml.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_xml_private.pri \
		/usr/lib/qt/mkspecs/features/qt_functions.prf \
		/usr/lib/qt/mkspecs/features/qt_config.prf \
		/usr/lib/qt/mkspecs/linux-g++/qmake.conf \
		/usr/lib/qt/mkspecs/features/spec_post.prf \
		/usr/lib/qt/mkspecs/features/exclusive_builds.prf \
		/usr/lib/qt/mkspecs/features/default_pre.prf \
		/usr/lib/qt/mkspecs/features/resolve_config.prf \
		/usr/lib/qt/mkspecs/features/default_post.prf \
		/usr/lib/qt/mkspecs/features/warn_on.prf \
		/usr/lib/qt/mkspecs/features/qt.prf \
		/usr/lib/qt/mkspecs/features/resources.prf \
		/usr/lib/qt/mkspecs/features/moc.prf \
		/usr/lib/qt/mkspecs/features/unix/thread.prf \
		/usr/lib/qt/mkspecs/features/testcase_targets.prf \
		/usr/lib/qt/mkspecs/features/exceptions.prf \
		/usr/lib/qt/mkspecs/features/yacc.prf \
		/usr/lib/qt/mkspecs/features/lex.prf \
		fpTool.pro  main.cpp
QMAKE_TARGET  = fpTool
DESTDIR       = #avoid trailing-slash linebreak
TARGET        = fpTool


first: all
####### Implicit rules

.SUFFIXES: .o .c .cpp .cc .cxx .C

.cpp.o:
	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o "$@" "$<"

.cc.o:
	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o "$@" "$<"

.cxx.o:
	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o "$@" "$<"

.C.o:
	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o "$@" "$<"

.c.o:
	$(CC) -c $(CFLAGS) $(INCPATH) -o "$@" "$<"

####### Build rules

$(TARGET):  $(OBJECTS)  
	$(LINK) $(LFLAGS) -o $(TARGET) $(OBJECTS) $(OBJCOMP) $(LIBS)

Makefile: fpTool.pro /usr/lib/qt/mkspecs/linux-g++/qmake.conf /usr/lib/qt/mkspecs/features/spec_pre.prf \
		/usr/lib/qt/mkspecs/common/shell-unix.conf \
		/usr/lib/qt/mkspecs/common/unix.conf \
		/usr/lib/qt/mkspecs/common/linux.conf \
		/usr/lib/qt/mkspecs/common/gcc-base.conf \
		/usr/lib/qt/mkspecs/common/gcc-base-unix.conf \
		/usr/lib/qt/mkspecs/common/g++-base.conf \
		/usr/lib/qt/mkspecs/common/g++-unix.conf \
		/usr/lib/qt/mkspecs/qconfig.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_bootstrap_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_concurrent.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_concurrent_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_core.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_core_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_dbus.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_dbus_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_gui.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_gui_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_network.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_network_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_opengl.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_opengl_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_openglextensions.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_openglextensions_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_platformsupport_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_printsupport.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_printsupport_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_sql.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_sql_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_testlib.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_testlib_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_widgets.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_widgets_private.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_xml.pri \
		/usr/lib/qt/mkspecs/modules/qt_lib_xml_private.pri \
		/usr/lib/qt/mkspecs/features/qt_functions.prf \
		/usr/lib/qt/mkspecs/features/qt_config.prf \
		/usr/lib/qt/mkspecs/linux-g++/qmake.conf \
		/usr/lib/qt/mkspecs/features/spec_post.prf \
		/usr/lib/qt/mkspecs/features/exclusive_builds.prf \
		/usr/lib/qt/mkspecs/features/default_pre.prf \
		/usr/lib/qt/mkspecs/features/resolve_config.prf \
		/usr/lib/qt/mkspecs/features/default_post.prf \
		/usr/lib/qt/mkspecs/features/warn_on.prf \
		/usr/lib/qt/mkspecs/features/qt.prf \
		/usr/lib/qt/mkspecs/features/resources.prf \
		/usr/lib/qt/mkspecs/features/moc.prf \
		/usr/lib/qt/mkspecs/features/unix/thread.prf \
		/usr/lib/qt/mkspecs/features/testcase_targets.prf \
		/usr/lib/qt/mkspecs/features/exceptions.prf \
		/usr/lib/qt/mkspecs/features/yacc.prf \
		/usr/lib/qt/mkspecs/features/lex.prf \
		fpTool.pro \
		/usr/lib/libQt5Core.prl
	$(QMAKE) DEFINES+=QT_NO_DEBUG_OUTPUT -o Makefile fpTool.pro
/usr/lib/qt/mkspecs/features/spec_pre.prf:
/usr/lib/qt/mkspecs/common/shell-unix.conf:
/usr/lib/qt/mkspecs/common/unix.conf:
/usr/lib/qt/mkspecs/common/linux.conf:
/usr/lib/qt/mkspecs/common/gcc-base.conf:
/usr/lib/qt/mkspecs/common/gcc-base-unix.conf:
/usr/lib/qt/mkspecs/common/g++-base.conf:
/usr/lib/qt/mkspecs/common/g++-unix.conf:
/usr/lib/qt/mkspecs/qconfig.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_bootstrap_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_concurrent.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_concurrent_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_core.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_core_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_dbus.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_dbus_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_gui.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_gui_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_network.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_network_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_opengl.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_opengl_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_openglextensions.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_openglextensions_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_platformsupport_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_printsupport.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_printsupport_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_sql.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_sql_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_testlib.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_testlib_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_widgets.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_widgets_private.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_xml.pri:
/usr/lib/qt/mkspecs/modules/qt_lib_xml_private.pri:
/usr/lib/qt/mkspecs/features/qt_functions.prf:
/usr/lib/qt/mkspecs/features/qt_config.prf:
/usr/lib/qt/mkspecs/linux-g++/qmake.conf:
/usr/lib/qt/mkspecs/features/spec_post.prf:
/usr/lib/qt/mkspecs/features/exclusive_builds.prf:
/usr/lib/qt/mkspecs/features/default_pre.prf:
/usr/lib/qt/mkspecs/features/resolve_config.prf:
/usr/lib/qt/mkspecs/features/default_post.prf:
/usr/lib/qt/mkspecs/features/warn_on.prf:
/usr/lib/qt/mkspecs/features/qt.prf:
/usr/lib/qt/mkspecs/features/resources.prf:
/usr/lib/qt/mkspecs/features/moc.prf:
/usr/lib/qt/mkspecs/features/unix/thread.prf:
/usr/lib/qt/mkspecs/features/testcase_targets.prf:
/usr/lib/qt/mkspecs/features/exceptions.prf:
/usr/lib/qt/mkspecs/features/yacc.prf:
/usr/lib/qt/mkspecs/features/lex.prf:
fpTool.pro:
/usr/lib/libQt5Core.prl:
qmake: FORCE
	@$(QMAKE) DEFINES+=QT_NO_DEBUG_OUTPUT -o Makefile fpTool.pro

qmake_all: FORCE


all: Makefile $(TARGET)

dist: distdir FORCE
	(cd `dirname $(DISTDIR)` && $(TAR) $(DISTNAME).tar $(DISTNAME) && $(COMPRESS) $(DISTNAME).tar) && $(MOVE) `dirname $(DISTDIR)`/$(DISTNAME).tar.gz . && $(DEL_FILE) -r $(DISTDIR)

distdir: FORCE
	@test -d $(DISTDIR) || mkdir -p $(DISTDIR)
	$(COPY_FILE) --parents $(DIST) $(DISTDIR)/
	$(COPY_FILE) --parents main.cpp $(DISTDIR)/


clean:compiler_clean 
	-$(DEL_FILE) $(OBJECTS)
	-$(DEL_FILE) *~ core *.core


distclean: clean 
	-$(DEL_FILE) $(TARGET) 
	-$(DEL_FILE) Makefile


####### Sub-libraries

mocclean: compiler_moc_header_clean compiler_moc_source_clean

mocables: compiler_moc_header_make_all compiler_moc_source_make_all

check: first

compiler_rcc_make_all:
compiler_rcc_clean:
compiler_moc_header_make_all:
compiler_moc_header_clean:
compiler_moc_source_make_all:
compiler_moc_source_clean:
compiler_yacc_decl_make_all:
compiler_yacc_decl_clean:
compiler_yacc_impl_make_all:
compiler_yacc_impl_clean:
compiler_lex_make_all:
compiler_lex_clean:
compiler_clean: 

####### Compile

main.o: main.cpp 
	$(CXX) -c $(CXXFLAGS) $(INCPATH) -o main.o main.cpp

####### Install

install:   FORCE

uninstall:   FORCE

FORCE:

...Now that I look at it, it just has a label "FORCE:" and that's it, which explains why it says there is nothing to do...

Please tell me if you need me to provide more info.

[ Arch x86_64 | linux | Framework 13 | AMD Ryzen™ 5 7640U | 32GB RAM | KDE Plasma Wayland ]

Offline

Pages: 1

Board footer

Powered by FluxBB