[SOLVED]sensors showing 0 degrees

shoelesshunter · 2015-01-21 06:07:50

my processor temperature is suddenly off a bit. this is new and I don't know what I may have done to cause it.

here is the output of

sensors

f71889a-isa-0480
Adapter: ISA adapter
+3.3V:        +3.20 V  
in1:          +1.39 V  (max =  +2.04 V)
in2:          +1.63 V  
in3:          +0.92 V  
in4:          +2.04 V  
in5:          +1.35 V  
in6:          +1.18 V  
3VSB:         +3.15 V  
Vbat:         +3.31 V  
fan1:        2835 RPM
fan2:           0 RPM  ALARM
fan3:        1163 RPM
temp1:        +40.0°C  (high = +85.0°C, hyst = +81.0°C)
                       (crit = +100.0°C, hyst = +96.0°C)  sensor = transistor
temp2:        +50.0°C  (high = +85.0°C, hyst = +79.0°C)
                       (crit = +107.0°C, hyst = +101.0°C)  sensor = thermistor
temp3:        +30.0°C  (high = +70.0°C, hyst = +68.0°C)
                       (crit = +85.0°C, hyst = +83.0°C)  sensor = transistor

k10temp-pci-00c3
Adapter: PCI adapter
temp1:         +0.0°C  (high = +70.0°C)
                       (crit = +90.0°C, hyst = +85.0°C)

Last edited by shoelesshunter (2015-01-21 08:32:47)

jasonwryan · 2015-01-21 06:15:00

More information required: your hardware, what has changed, etc.

Have you re-run sensors-detect?

Moving to NC...

shoelesshunter · 2015-01-21 07:24:11

I have re-run sensors-detect and as before, it loads f71889a and k10temp. fancontrol is set up via pwmconfig. that has not chaged; that was the setup before. I have visual confirmation that the cpu fan is running, so I am not too worried, but I don't know what changed. the only reason I noticed was seeig the desktop widget I use to monitor the temps display 0. I wasn't doing anything but operating a web browser at the time it fizzled out. I have tried stopping/disbaling fancontrol but this does not change it.

my relivant hardware is:

AMD Phenom II x6 1100T
MSI MS-7640 motherboard

shoelesshunter · 2015-01-21 07:41:20

a reboot solved the issue. the reading is now 33.6C

cedeel · 2015-01-21 07:42:11

Please add a [Solved] tag to the title if your problem is resolved.

Arch Linux

#1 2015-01-21 06:07:50

[SOLVED]sensors showing 0 degrees

#2 2015-01-21 06:15:00

Re: [SOLVED]sensors showing 0 degrees

#3 2015-01-21 07:24:11

Re: [SOLVED]sensors showing 0 degrees

#4 2015-01-21 07:41:20

Re: [SOLVED]sensors showing 0 degrees

#5 2015-01-21 07:42:11

Re: [SOLVED]sensors showing 0 degrees

Board footer