You are not logged in.

#1 2006-03-20 10:36:34

mehldutt
Member
From: Germany
Registered: 2006-01-08
Posts: 128

Camera not detected anymore [SOLVED]

since recently my camera "Canon PowerShot A95" isn't detected anymore.

the module ist loaded after connecting:
everything.log:
Mar 20 11:31:22 matrix usb 1-2: new full speed USB device using uhci_hcd and address 2

however, the camera doesn't appear:
lsusb:
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

There's no diffence when running as root
Any ideas ?

Gary

Offline

#2 2006-03-20 11:27:44

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: Camera not detected anymore [SOLVED]

Actually, that log message doesn't say the module is loaded - it just says that the device has been detected and assigned a bus address. It should still show up on lsusb, though.

Is it USB Mass Storage or PTP?

Offline

#3 2006-03-20 12:25:14

mehldutt
Member
From: Germany
Registered: 2006-01-08
Posts: 128

Re: Camera not detected anymore [SOLVED]

Thanks for your responce.

Well, the camera was detected as PTP.

In addition, other usb devices work without any problems: eg printer, Palm and usb-stick and usb-harddrive

Offline

#4 2006-03-20 13:37:53

scarecrow
Member
From: Greece
Registered: 2004-11-18
Posts: 715

Re: Camera not detected anymore [SOLVED]

At PTP mode the camera isn't detected as a storage device.
You need something like gphoto or digikam to get its contents.
If the camera has a normal/usbstorage setting (I think not, as happens with most Canon digicams), then use that one instead before connecting it.


Microshaft delenda est

Offline

#5 2006-03-20 13:50:12

mehldutt
Member
From: Germany
Registered: 2006-01-08
Posts: 128

Re: Camera not detected anymore [SOLVED]

unfortunatly neither digikam nor gthumb recognize the camera anymore

Offline

#6 2006-03-20 20:21:52

mehldutt
Member
From: Germany
Registered: 2006-01-08
Posts: 128

Re: Camera not detected anymore [SOLVED]

I ran:

gphoto2 --auto-detect

as user and as root
still, no camera detected

I've also installed Ubuntu on my second partition.  Here my camera was detected without any problems.

Again, a few weeks ago everything worked perfectly on ARCH.

Is there anyone out there who can help?

Offline

#7 2006-03-22 16:04:19

Painless
Member
Registered: 2006-02-06
Posts: 233

Re: Camera not detected anymore [SOLVED]

Hi,

I use a PowerShot A620, which shows up as a generic PTP camera. I had a brief problem (gtkam said something like: "unable to access /").  After a little head scratching, I found this was due to using an old version of /etc/udev/rules.d/gphoto.rules.  Once I copied the new gphoto.rules.pacnew over the existing gphoto.rules, I had to change the lines:

# USB PTP Class Camera
#SYSFS{idVendor}=="0000", SYSFS{idProduct}=="0000", GROUP="camera"

to read:

# USB PTP Class Camera
SYSFS{idVendor}=="0000", SYSFS{idProduct}=="0000", GROUP="camera"

After this I could access my camera again.

Maybe your problem is related?  Either way, I hope you manage to sort it out.

Regards,

Rob

Offline

#8 2006-03-22 19:18:47

scarecrow
Member
From: Greece
Registered: 2004-11-18
Posts: 715

Re: Camera not detected anymore [SOLVED]

Hmmm... I have no issues at all with a Cybershot DSC-P200 and the current stock kernel, with latest udev/dbus/hal/pmount versions (nothing from /testing). Factly, I can use the camera both at usbstorage and PtP mode.


Microshaft delenda est

Offline

#9 2006-03-24 12:21:48

mehldutt
Member
From: Germany
Registered: 2006-01-08
Posts: 128

Re: Camera not detected anymore [SOLVED]

Ups ...
.. I've noticed an older udev-rules I wrote for my Palm device that I didn't need anymore.  It seemed to conflict with my camera.  I don't know why it worked before. However, since I deleted the rules my camera is detected again.

Thanks to all

Gary

Offline

Board footer

Powered by FluxBB