You are not logged in.
I was trying to install NVIDIA Propriertary Driver ( from the repo and NVIDIA Website ) on my Arch Setup, and I Failed ( Probably because I'm using NVIDIA Optimus ). So I tried removing the NVIDIA Proprietary Driver and switch back using nouveau by using this guide.
And when i tried to run glxgears, It said "Xlib: extension "GLX" missing on display ":0".".
I already tried reinstalling xf86-video-nouveau, mesa-libgl ,lib32-mesa-libgl.
I also received a message saying, "Error: Driver 'nvlink' is already registered, aborting..." everytime when my Machine boots up.
X11 Log.
[ 23.142]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 23.142] X Protocol Version 11, Revision 0
[ 23.142] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 23.142] Current Operating System: Linux captainfroster 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 23.142] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=259bbcff-341c-4d71-a9d9-b976d37d3e15 rw
[ 23.142] Build Date: 22 February 2015 12:50:32PM
[ 23.142]
[ 23.142] Current version of pixman: 0.32.6
[ 23.142] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.142] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.143] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 27 20:10:57 2015
[ 23.270] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.270] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23.531] (==) No Layout section. Using the first Screen section.
[ 23.531] (==) No screen section available. Using defaults.
[ 23.531] (**) |-->Screen "Default Screen Section" (0)
[ 23.531] (**) | |-->Monitor "<default monitor>"
[ 23.564] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.564] (==) Automatically adding devices
[ 23.564] (==) Automatically enabling devices
[ 23.564] (==) Automatically adding GPU devices
[ 23.781] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 23.781] Entry deleted from font path.
[ 23.781] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 23.816] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 23.816] Entry deleted from font path.
[ 23.816] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 23.816] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 23.816] Entry deleted from font path.
[ 23.816] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 23.816] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 23.816] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.816] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.846] (II) Loader magic: 0x815d80
[ 23.846] (II) Module ABI versions:
[ 23.846] X.Org ANSI C Emulation: 0.4
[ 23.846] X.Org Video Driver: 19.0
[ 23.846] X.Org XInput driver : 21.0
[ 23.846] X.Org Server Extension : 9.0
[ 23.848] (EE) systemd-logind: failed to get session: PID 465 does not belong to any known session
[ 23.849] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 23.849] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23.851] (--) PCI:*(0:0:2:0) 8086:0166:17aa:5001 rev 9, Mem @ 0xcb000000/4194304, 0xb0000000/268435456, I/O @ 0x00006000/64
[ 23.851] (--) PCI: (0:1:0:0) 10de:1058:17aa:5001 rev 161, Mem @ 0xca000000/16777216, 0xc0000000/134217728, 0xc8000000/33554432, I/O @ 0x00005000/128
[ 23.851] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 23.861] (II) LoadModule: "glx"
[ 23.949] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 28.583] (II) Module glx: vendor="X.Org Foundation"
[ 28.583] compiled for 1.17.1, module version = 1.0.0
[ 28.583] ABI class: X.Org Server Extension, version 9.0
[ 28.583] (==) AIGLX enabled
[ 28.583] (==) Matched intel as autoconfigured driver 0
[ 28.583] (==) Matched nouveau as autoconfigured driver 1
[ 28.583] (==) Matched nv as autoconfigured driver 2
[ 28.583] (==) Matched intel as autoconfigured driver 3
[ 28.583] (==) Matched modesetting as autoconfigured driver 4
[ 28.583] (==) Matched fbdev as autoconfigured driver 5
[ 28.583] (==) Matched vesa as autoconfigured driver 6
[ 28.583] (==) Assigned the driver to the xf86ConfigLayout
[ 28.583] (II) LoadModule: "intel"
[ 28.604] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 28.665] (II) Module intel: vendor="X.Org Foundation"
[ 28.665] compiled for 1.17.1, module version = 2.99.917
[ 28.665] Module class: X.Org Video Driver
[ 28.665] ABI class: X.Org Video Driver, version 19.0
[ 28.665] (II) LoadModule: "nouveau"
[ 28.665] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 28.681] (II) Module nouveau: vendor="X.Org Foundation"
[ 28.681] compiled for 1.17.0, module version = 1.0.11
[ 28.681] Module class: X.Org Video Driver
[ 28.681] ABI class: X.Org Video Driver, version 19.0
[ 28.681] (II) LoadModule: "nv"
[ 28.682] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 28.691] (II) Module nv: vendor="X.Org Foundation"
[ 28.691] compiled for 1.17.0, module version = 2.1.20
[ 28.691] Module class: X.Org Video Driver
[ 28.691] ABI class: X.Org Video Driver, version 19.0
[ 28.691] (II) LoadModule: "modesetting"
[ 28.691] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 28.705] (II) Module modesetting: vendor="X.Org Foundation"
[ 28.705] compiled for 1.17.1, module version = 1.17.1
[ 28.705] Module class: X.Org Video Driver
[ 28.705] ABI class: X.Org Video Driver, version 19.0
[ 28.705] (II) LoadModule: "fbdev"
[ 28.705] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 28.721] (II) Module fbdev: vendor="X.Org Foundation"
[ 28.721] compiled for 1.17.0, module version = 0.4.4
[ 28.721] Module class: X.Org Video Driver
[ 28.721] ABI class: X.Org Video Driver, version 19.0
[ 28.721] (II) LoadModule: "vesa"
[ 28.721] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 28.734] (II) Module vesa: vendor="X.Org Foundation"
[ 28.734] compiled for 1.17.0, module version = 2.3.2
[ 28.734] Module class: X.Org Video Driver
[ 28.734] ABI class: X.Org Video Driver, version 19.0
[ 28.734] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 28.734] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 28.734] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 28.734] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 28.734] (II) NOUVEAU driver
[ 28.734] (II) NOUVEAU driver for NVIDIA chipset families :
[ 28.734] RIVA TNT (NV04)
[ 28.734] RIVA TNT2 (NV05)
[ 28.734] GeForce 256 (NV10)
[ 28.734] GeForce 2 (NV11, NV15)
[ 28.734] GeForce 4MX (NV17, NV18)
[ 28.734] GeForce 3 (NV20)
[ 28.734] GeForce 4Ti (NV25, NV28)
[ 28.735] GeForce FX (NV3x)
[ 28.735] GeForce 6 (NV4x)
[ 28.735] GeForce 7 (G7x)
[ 28.735] GeForce 8 (G8x)
[ 28.735] GeForce GTX 200 (NVA0)
[ 28.735] GeForce GTX 400 (NVC0)
[ 28.735] (II) NOUVEAU driver
[ 28.735] (II) NOUVEAU driver for NVIDIA chipset families :
[ 28.735] RIVA TNT (NV04)
[ 28.735] RIVA TNT2 (NV05)
[ 28.735] GeForce 256 (NV10)
[ 28.735] GeForce 2 (NV11, NV15)
[ 28.735] GeForce 4MX (NV17, NV18)
[ 28.735] GeForce 3 (NV20)
[ 28.735] GeForce 4Ti (NV25, NV28)
[ 28.735] GeForce FX (NV3x)
[ 28.735] GeForce 6 (NV4x)
[ 28.735] GeForce 7 (G7x)
[ 28.735] GeForce 8 (G8x)
[ 28.735] GeForce GTX 200 (NVA0)
[ 28.735] GeForce GTX 400 (NVC0)
[ 28.735] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 28.735] (II) FBDEV: driver for framebuffer: fbdev
[ 28.735] (II) VESA: driver for VESA chipsets: vesa
[ 28.735] (++) using VT number 1
[ 28.736] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 28.744] (II) [drm] nouveau interface version: 1.2.1
[ 28.744] (WW) Falling back to old probe method for modesetting
[ 28.744] (WW) Falling back to old probe method for fbdev
[ 28.744] (II) Loading sub module "fbdevhw"
[ 28.744] (II) LoadModule: "fbdevhw"
[ 28.745] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 28.753] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 28.753] compiled for 1.17.1, module version = 0.0.2
[ 28.753] ABI class: X.Org Video Driver, version 19.0
[ 28.753] (WW) Falling back to old probe method for vesa
[ 28.754] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 28.754] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 28.754] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 28.754] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 28.754] (==) intel(0): RGB weight 888
[ 28.754] (==) intel(0): Default visual is TrueColor
[ 28.755] (II) intel(0): Output LVDS1 has no monitor section
[ 28.755] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 28.755] (II) intel(0): Enabled output LVDS1
[ 28.755] (II) intel(0): Output VGA1 has no monitor section
[ 28.755] (II) intel(0): Enabled output VGA1
[ 28.755] (II) intel(0): Output HDMI1 has no monitor section
[ 28.755] (II) intel(0): Enabled output HDMI1
[ 28.755] (II) intel(0): Output DP1 has no monitor section
[ 28.755] (II) intel(0): Enabled output DP1
[ 28.755] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 28.755] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 28.755] (II) intel(0): Enabled output VIRTUAL1
[ 28.755] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 28.755] (==) intel(0): TearFree disabled
[ 28.755] (==) intel(0): DPI set to (96, 96)
[ 28.755] (II) Loading sub module "dri2"
[ 28.755] (II) LoadModule: "dri2"
[ 28.755] (II) Module "dri2" already built-in
[ 28.756] (II) Loading sub module "present"
[ 28.756] (II) LoadModule: "present"
[ 28.756] (II) Module "present" already built-in
[ 28.756] (II) Loading sub module "dri2"
[ 28.756] (II) LoadModule: "dri2"
[ 28.756] (II) Module "dri2" already built-in
[ 28.756] (--) NOUVEAU(G0): Chipset: "NVIDIA NVD9"
[ 28.756] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 28.756] (==) NOUVEAU(G0): RGB weight 888
[ 28.756] (==) NOUVEAU(G0): Default visual is TrueColor
[ 28.756] (==) NOUVEAU(G0): Using HW cursor
[ 28.756] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[ 28.756] (==) NOUVEAU(G0): Page flipping enabled
[ 28.756] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[ 28.756] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[ 28.756] (II) NOUVEAU(G0): Initializing outputs ...
[ 28.767] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[ 28.767] (II) NOUVEAU(G0): 1 crtcs needed for screen.
[ 28.771] (II) NOUVEAU(G0): Allocated crtc nr. 0 to this screen.
[ 28.771] (II) NOUVEAU(G0): Allocated crtc nr. 1 to this screen.
[ 28.782] (II) NOUVEAU(G0): EDID for output VGA-1-2
[ 28.782] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[ 28.782] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 28.782] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 28.782] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 28.782] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 28.782] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 28.782] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 28.782] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 28.782] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 28.782] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 28.782] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 28.782] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 28.782] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 28.782] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 28.782] (**) NOUVEAU(G0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 28.782] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 28.782] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 28.782] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 28.782] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 28.782] (II) Loading sub module "fb"
[ 28.782] (II) LoadModule: "fb"
[ 28.782] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 28.796] (II) Module fb: vendor="X.Org Foundation"
[ 28.796] compiled for 1.17.1, module version = 1.0.0
[ 28.797] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.797] (II) Loading sub module "shadowfb"
[ 28.797] (II) LoadModule: "shadowfb"
[ 28.797] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 28.797] (II) Module shadowfb: vendor="X.Org Foundation"
[ 28.797] compiled for 1.17.1, module version = 1.0.0
[ 28.797] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.797] (II) UnloadModule: "nv"
[ 28.797] (II) Unloading nv
[ 28.797] (II) UnloadModule: "modesetting"
[ 28.797] (II) Unloading modesetting
[ 28.797] (II) UnloadModule: "fbdev"
[ 28.797] (II) Unloading fbdev
[ 28.797] (II) UnloadSubModule: "fbdevhw"
[ 28.797] (II) Unloading fbdevhw
[ 28.797] (II) UnloadModule: "vesa"
[ 28.797] (II) Unloading vesa
[ 28.797] (==) Depth 24 pixmap format is 32 bpp
[ 28.803] (II) NOUVEAU(G0): Channel setup complete.
[ 28.805] (II) NOUVEAU(G0): [COPY] async initialised.
[ 28.806] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 28.806] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 28.806] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 28.808] (II) Loading sub module "exa"
[ 28.808] (II) LoadModule: "exa"
[ 28.808] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 28.818] (II) Module exa: vendor="X.Org Foundation"
[ 28.818] compiled for 1.17.1, module version = 2.6.0
[ 28.818] ABI class: X.Org Video Driver, version 19.0
[ 28.818] (II) EXA(256): Driver allocated offscreen pixmaps
[ 28.818] (II) EXA(256): Driver registered support for the following operations:
[ 28.818] (II) Solid
[ 28.818] (II) Copy
[ 28.818] (II) Composite (RENDER acceleration)
[ 28.818] (II) UploadToScreen
[ 28.818] (II) DownloadFromScreen
[ 28.818] (==) NOUVEAU(G0): Backing store enabled
[ 28.818] (==) NOUVEAU(G0): Silken mouse enabled
[ 28.819] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 28.819] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 28.819] (==) NOUVEAU(G0): DPMS enabled
[ 28.819] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 28.829] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 28.829] (==) intel(0): Backing store enabled
[ 28.829] (==) intel(0): Silken mouse enabled
[ 28.829] (II) intel(0): HW Cursor enabled
[ 28.829] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 28.829] (==) intel(0): DPMS enabled
[ 28.829] (==) intel(0): display hotplug detection enabled
[ 28.829] (II) intel(0): [DRI2] Setup complete
[ 28.829] (II) intel(0): [DRI2] DRI driver: i965
[ 28.829] (II) intel(0): [DRI2] VDPAU driver: i965
[ 28.829] (II) intel(0): direct rendering: DRI2 enabled
[ 28.829] (II) intel(0): hardware support for Present enabled
[ 28.830] (--) RandR disabled
[ 28.879] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/i965_dri.so failed (/usr/lib/xorg/modules/dri/i965_dri.so: undefined symbol: _glapi_tls_Dispatch)
[ 28.879] (EE) AIGLX: reverting to software rendering
[ 29.158] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/swrast_dri.so failed (/usr/lib/xorg/modules/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch)
[ 29.158] (EE) GLX: could not load software renderer
[ 29.158] (II) GLX: no usable GL providers found for screen 0
[ 29.160] (II) NOUVEAU(G0): NVEnterVT is called.
[ 29.180] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 29.200] (II) intel(0): Setting screen physical size to 361 x 203
[ 29.743] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 29.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.743] (**) Power Button: Applying InputClass "keyboard-layout"
[ 29.743] (II) LoadModule: "evdev"
[ 29.743] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.783] (II) Module evdev: vendor="X.Org Foundation"
[ 29.784] compiled for 1.16.2, module version = 2.9.1
[ 29.784] Module class: X.Org XInput Driver
[ 29.784] ABI class: X.Org XInput driver, version 21.0
[ 29.784] (II) Using input driver 'evdev' for 'Power Button'
[ 29.784] (**) Power Button: always reports core events
[ 29.784] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 29.784] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.784] (--) evdev: Power Button: Found keys
[ 29.784] (II) evdev: Power Button: Configuring as keyboard
[ 29.784] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 29.784] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 29.784] (**) Option "xkb_rules" "evdev"
[ 29.784] (**) Option "xkb_model" "pc104"
[ 29.784] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 29.847] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 29.847] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 29.847] (**) Video Bus: Applying InputClass "keyboard-layout"
[ 29.847] (II) Using input driver 'evdev' for 'Video Bus'
[ 29.847] (**) Video Bus: always reports core events
[ 29.847] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 29.847] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 29.847] (--) evdev: Video Bus: Found keys
[ 29.847] (II) evdev: Video Bus: Configuring as keyboard
[ 29.847] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event6"
[ 29.847] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 29.847] (**) Option "xkb_rules" "evdev"
[ 29.847] (**) Option "xkb_model" "pc104"
[ 29.847] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 29.848] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 29.848] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 29.848] (**) Video Bus: Applying InputClass "keyboard-layout"
[ 29.848] (II) Using input driver 'evdev' for 'Video Bus'
[ 29.848] (**) Video Bus: always reports core events
[ 29.848] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 29.848] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 29.848] (--) evdev: Video Bus: Found keys
[ 29.848] (II) evdev: Video Bus: Configuring as keyboard
[ 29.848] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:43/LNXVIDEO:01/input/input10/event7"
[ 29.848] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 29.848] (**) Option "xkb_rules" "evdev"
[ 29.848] (**) Option "xkb_model" "pc104"
[ 29.848] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 29.849] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 29.849] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.849] (**) Power Button: Applying InputClass "keyboard-layout"
[ 29.849] (II) Using input driver 'evdev' for 'Power Button'
[ 29.849] (**) Power Button: always reports core events
[ 29.849] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 29.849] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.849] (--) evdev: Power Button: Found keys
[ 29.849] (II) evdev: Power Button: Configuring as keyboard
[ 29.849] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 29.849] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 29.849] (**) Option "xkb_rules" "evdev"
[ 29.849] (**) Option "xkb_model" "pc104"
[ 29.849] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 29.850] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 29.850] (II) No input driver specified, ignoring this device.
[ 29.850] (II) This device may have been added with another device file.
[ 29.851] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 29.851] (**) USB OPTICAL MOUSE : Applying InputClass "evdev pointer catchall"
[ 29.851] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE '
[ 29.851] (**) USB OPTICAL MOUSE : always reports core events
[ 29.851] (**) evdev: USB OPTICAL MOUSE : Device: "/dev/input/event1"
[ 29.851] (--) evdev: USB OPTICAL MOUSE : Vendor 0x2188 Product 0xae1
[ 29.851] (--) evdev: USB OPTICAL MOUSE : Found 3 mouse buttons
[ 29.852] (--) evdev: USB OPTICAL MOUSE : Found scroll wheel(s)
[ 29.852] (--) evdev: USB OPTICAL MOUSE : Found relative axes
[ 29.852] (--) evdev: USB OPTICAL MOUSE : Found x and y relative axes
[ 29.852] (II) evdev: USB OPTICAL MOUSE : Configuring as mouse
[ 29.852] (II) evdev: USB OPTICAL MOUSE : Adding scrollwheel support
[ 29.852] (**) evdev: USB OPTICAL MOUSE : YAxisMapping: buttons 4 and 5
[ 29.852] (**) evdev: USB OPTICAL MOUSE : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:2188:0AE1.0001/input/input2/event1"
[ 29.852] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE " (type: MOUSE, id 10)
[ 29.852] (II) evdev: USB OPTICAL MOUSE : initialized for relative axes.
[ 29.852] (**) USB OPTICAL MOUSE : (accel) keeping acceleration scheme 1
[ 29.852] (**) USB OPTICAL MOUSE : (accel) acceleration profile 0
[ 29.852] (**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000
[ 29.852] (**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4
[ 29.852] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 29.852] (II) No input driver specified, ignoring this device.
[ 29.852] (II) This device may have been added with another device file.
[ 29.853] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 29.853] (II) No input driver specified, ignoring this device.
[ 29.853] (II) This device may have been added with another device file.
[ 29.853] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 29.853] (II) No input driver specified, ignoring this device.
[ 29.853] (II) This device may have been added with another device file.
[ 29.854] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 29.854] (II) No input driver specified, ignoring this device.
[ 29.854] (II) This device may have been added with another device file.
[ 29.854] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 29.854] (II) No input driver specified, ignoring this device.
[ 29.854] (II) This device may have been added with another device file.
[ 29.854] (II) config/udev: Adding input device Integrated Camera (/dev/input/event13)
[ 29.854] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 29.854] (**) Integrated Camera: Applying InputClass "keyboard-layout"
[ 29.854] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 29.854] (**) Integrated Camera: always reports core events
[ 29.854] (**) evdev: Integrated Camera: Device: "/dev/input/event13"
[ 29.855] (--) evdev: Integrated Camera: Vendor 0x5ca Product 0x1823
[ 29.855] (--) evdev: Integrated Camera: Found keys
[ 29.855] (II) evdev: Integrated Camera: Configuring as keyboard
[ 29.855] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input15/event13"
[ 29.855] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 11)
[ 29.855] (**) Option "xkb_rules" "evdev"
[ 29.855] (**) Option "xkb_model" "pc104"
[ 29.855] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 29.856] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 29.856] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 29.856] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-layout"
[ 29.856] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 29.856] (**) AT Translated Set 2 keyboard: always reports core events
[ 29.856] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 29.856] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 29.856] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 29.856] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 29.856] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 29.856] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 29.856] (**) Option "xkb_rules" "evdev"
[ 29.856] (**) Option "xkb_model" "pc104"
[ 29.856] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 29.857] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 29.857] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 29.857] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 29.857] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 29.857] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Synaptics touchpads"
[ 29.857] (II) LoadModule: "synaptics"
[ 29.857] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 29.864] (II) Module synaptics: vendor="X.Org Foundation"
[ 29.864] compiled for 1.16.0, module version = 1.8.1
[ 29.864] Module class: X.Org XInput Driver
[ 29.864] ABI class: X.Org XInput driver, version 21.0
[ 29.864] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 29.864] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 29.864] (**) Option "Device" "/dev/input/event12"
[ 29.970] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 29.970] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5702 (res 51)
[ 29.970] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4828 (res 84)
[ 29.970] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 29.970] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 29.970] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 29.970] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 29.970] (**) Option "EmulateTwoFingerMinZ" "40"
[ 29.970] (**) Option "EmulateTwoFingerMinW" "8"
[ 29.970] (**) Option "VertEdgeScroll" "on"
[ 29.970] (**) Option "HorizEdgeScroll" "on"
[ 29.970] (**) Option "VertTwoFingerScroll" "on"
[ 29.970] (**) Option "HorizTwoFingerScroll" "on"
[ 29.970] (**) Option "TapButton1" "1"
[ 29.970] (**) Option "TapButton2" "2"
[ 29.970] (**) Option "TapButton3" "3"
[ 29.971] (**) Option "CircularScrolling" "on"
[ 29.971] (**) Option "CircScrollTrigger" "2"
[ 29.971] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 29.971] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 29.971] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 30.023] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
[ 30.023] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 30.023] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 30.023] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 30.023] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 30.023] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 30.023] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 30.023] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 30.023] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 30.024] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 30.024] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 30.024] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 30.025] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 30.025] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 30.025] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 30.025] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 30.025] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 30.025] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 30.025] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 30.025] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 30.025] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 30.025] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 30.025] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 30.025] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.025] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
[ 30.025] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 30.025] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 30.025] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 30.025] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 30.025] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 30.025] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 30.025] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 30.025] (II) No input driver specified, ignoring this device.
[ 30.025] (II) This device may have been added with another device file.
[ 30.026] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 30.026] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 30.026] (**) ThinkPad Extra Buttons: Applying InputClass "keyboard-layout"
[ 30.026] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 30.026] (**) ThinkPad Extra Buttons: always reports core events
[ 30.026] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 30.026] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 30.026] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 30.026] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 30.026] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event5"
[ 30.026] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 15)
[ 30.026] (**) Option "xkb_rules" "evdev"
[ 30.026] (**) Option "xkb_model" "pc104"
[ 30.026] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 30.030] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card2 /dev/dri/card2
[ 30.030] (II) config/udev: Adding drm device (/dev/dri/card2)
[ 30.030] (II) xfree86: Adding drm device (/dev/dri/card2)
[ 30.030] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card2 /dev/dri/card2
[ 30.030] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card2 /dev/dri/card2
[ 30.030] (II) config/udev: Adding drm device (/dev/dri/card2)
[ 30.030] (II) xfree86: Adding drm device (/dev/dri/card2)
[ 30.031] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card2 /dev/dri/card2
[ 43.311] (II) intel(0): EDID vendor "CMN", prod id 5225
[ 43.311] (II) intel(0): Printing DDC gathered Modelines:
[ 43.311] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1480 768 770 776 780 -hsync -vsync (46.8 kHz eP)dmesg.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=259bbcff-341c-4d71-a9d9-b976d37d3e15 rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x0000000097521fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000097522000-0x00000000aae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aae9f000-0x00000000aaf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aaf9f000-0x00000000aaffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ff000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000024e600000-0x000000024effffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 3254C23/3254C23, BIOS H0ET90WW (2.50 ) 01/15/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x24e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0AC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0AB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FC0000000 write-back
[ 0.000000] 8 base 240000000 mask FF0000000 write-back
[ 0.000000] 9 base 24F000000 mask FFF000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x97522 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x24e400000-0x24e5fffff]
[ 0.000000] [mem 0x24e400000-0x24e5fffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x24c000000-0x24e3fffff]
[ 0.000000] [mem 0x24c000000-0x24e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x24bffffff]
[ 0.000000] [mem 0x200000000-0x24bffffff] page 2M
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0x97521fff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0x973fffff] page 2M
[ 0.000000] [mem 0x97400000-0x97521fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x37934000-0x37c91fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000AAFFE170 0000AC (v01 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: FACP 0x00000000AAFED000 00010C (v05 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000AAFEF000 00B57F (v02 LENOVO TP-H0 00002500 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000AAF69000 000040
[ 0.000000] ACPI: SLIC 0x00000000AAFFD000 000176 (v01 LENOVO TP-H0 00002500 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000AAFFC000 000518 (v02 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000AAFFB000 0006A5 (v02 LENOVO PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 0x00000000AAFEE000 0000A5 (v32 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: HPET 0x00000000AAFEB000 000038 (v01 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: APIC 0x00000000AAFEA000 000098 (v01 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x00000000AAFE9000 00003C (v01 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: FPDT 0x00000000AAFE8000 000064 (v01 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000AAFE7000 000926 (v02 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000AAFE6000 000A92 (v02 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000AAFE5000 00003E (v01 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000AAFE4000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 0x00000000AAF64000 000055 (v03 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000AAFE3000 0007D2 (v02 NvORef NvOptTbl 00001000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000AAFE2000 0002BA (v01 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: DBG2 0x00000000AAFE1000 0000A5 (v00 LENOVO TP-H0 00002500 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024e5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x24e5f5000-0x24e5f8fff]
[ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246200000-ffff88024dbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x24e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0x97521fff]
[ 0.000000] node 0: [mem 0x100000000-0x24e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x24e5fffff]
[ 0.000000] On node 0 totalpages: 1988797
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9613 pages used for memmap
[ 0.000000] DMA32 zone: 615201 pages, LIFO batch:31
[ 0.000000] Normal zone: 21400 pages used for memmap
[ 0.000000] Normal zone: 1369600 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xaba00000-0xaf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x97522000-0xaae9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaae9f000-0xaaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaaf9f000-0xaaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaafff000-0xaf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xff000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff001000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xafa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88024e200000 s82880 r8192 d31808 u262144
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1957699
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=259bbcff-341c-4d71-a9d9-b976d37d3e15 rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7747916K/7955188K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 207272K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31981568 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.172 MHz processor
[ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.19 BogoMIPS (lpj=8313906)
[ 0.000037] pid_max: default: 32768 minimum: 301
[ 0.000043] ACPI: Core revision 20140926
[ 0.012196] ACPI: All ACPI Tables successfully acquired
[ 0.015608] Security Framework initialized
[ 0.015614] Yama: becoming mindful.
[ 0.016088] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.018066] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018941] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018951] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019138] Initializing cgroup subsys memory
[ 0.019143] Initializing cgroup subsys devices
[ 0.019145] Initializing cgroup subsys freezer
[ 0.019147] Initializing cgroup subsys net_cls
[ 0.019149] Initializing cgroup subsys blkio
[ 0.019168] CPU: Physical Processor ID: 0
[ 0.019168] CPU: Processor Core ID: 0
[ 0.019173] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.019176] mce: CPU supports 7 MCE banks
[ 0.019187] CPU0: Thermal monitoring enabled (TM1)
[ 0.019194] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.019303] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.020213] ftrace: allocating 20931 entries in 82 pages
[ 0.030224] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063264] smpboot: CPU0: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
[ 0.063272] TSC deadline timer enabled
[ 0.063292] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.063311] ... version: 3
[ 0.063312] ... bit width: 48
[ 0.063313] ... generic registers: 4
[ 0.063314] ... value mask: 0000ffffffffffff
[ 0.063315] ... max period: 0000ffffffffffff
[ 0.063316] ... fixed-purpose events: 3
[ 0.063316] ... event mask: 000000070000000f
[ 0.083395] x86: Booting SMP configuration:
[ 0.083397] .... node #0, CPUs: #1
[ 0.096611] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.100112] #2 #3
[ 0.133399] x86: Booted up 1 node, 4 CPUs
[ 0.133402] smpboot: Total of 4 processors activated (19961.76 BogoMIPS)
[ 0.136641] devtmpfs: initialized
[ 0.139116] PM: Registering ACPI NVS region [mem 0xaae9f000-0xaaf9efff] (1048576 bytes)
[ 0.139919] pinctrl core: initialized pinctrl subsystem
[ 0.139959] RTC time: 13:10:34, date: 02/27/15
[ 0.140049] NET: Registered protocol family 16
[ 0.153472] cpuidle: using governor ladder
[ 0.166825] cpuidle: using governor menu
[ 0.166885] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.166887] ACPI: bus type PCI registered
[ 0.166888] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.167080] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.167083] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.167155] PCI: Using configuration type 1 for base access
[ 0.180530] ACPI: Added _OSI(Module Device)
[ 0.180532] ACPI: Added _OSI(Processor Device)
[ 0.180533] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180534] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183466] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.185946] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.225989] ACPI: Dynamic OEM Table Load:
[ 0.225999] ACPI: SSDT 0xFFFF880242F92000 00083B (v02 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.237187] ACPI: Dynamic OEM Table Load:
[ 0.237195] ACPI: SSDT 0xFFFF880242FC8C00 000303 (v02 PmRef ApIst 00003000 INTL 20061109)
[ 0.250426] ACPI: Dynamic OEM Table Load:
[ 0.250432] ACPI: SSDT 0xFFFF880242F52000 000119 (v02 PmRef ApCst 00003000 INTL 20061109)
[ 1.098264] ACPI: Interpreter enabled
[ 1.098272] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 1.098277] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 1.098294] ACPI: (supports S0 S3 S4 S5)
[ 1.098295] ACPI: Using IOAPIC for interrupt routing
[ 1.098323] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.104222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.104228] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.104271] \_SB_.PCI0:_OSC invalid UUID
[ 1.104272] _OSC request data:1 1f 0
[ 1.104275] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 1.104860] PCI host bridge to bus 0000:00
[ 1.104863] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.104864] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.104866] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.104868] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.104869] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[ 1.104876] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 1.104955] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 1.104988] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.105019] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 1.105058] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 1.105069] pci 0000:00:02.0: reg 0x10: [mem 0xcb000000-0xcb3fffff 64bit]
[ 1.105075] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.105080] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 1.105176] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 1.105198] pci 0000:00:14.0: reg 0x10: [mem 0xce600000-0xce60ffff 64bit]
[ 1.105272] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.105305] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.105344] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 1.105368] pci 0000:00:16.0: reg 0x10: [mem 0xce615000-0xce61500f 64bit]
[ 1.105446] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.105524] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 1.105546] pci 0000:00:1a.0: reg 0x10: [mem 0xce61a000-0xce61a3ff]
[ 1.105638] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.105686] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.105727] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 1.105744] pci 0000:00:1b.0: reg 0x10: [mem 0xce610000-0xce613fff 64bit]
[ 1.105820] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.105856] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.105892] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 1.105976] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.106014] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.106051] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 1.106134] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.106172] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 1.106206] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 1.106290] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.106328] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 1.106364] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 1.106448] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.106485] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.106528] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 1.106549] pci 0000:00:1d.0: reg 0x10: [mem 0xce619000-0xce6193ff]
[ 1.106642] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.106687] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.106725] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 1.106891] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 1.106910] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
[ 1.106918] pci 0000:00:1f.2: reg 0x14: [io 0x609c-0x609f]
[ 1.106926] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
[ 1.106934] pci 0000:00:1f.2: reg 0x1c: [io 0x6098-0x609b]
[ 1.106942] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 1.106950] pci 0000:00:1f.2: reg 0x24: [mem 0xce618000-0xce6187ff]
[ 1.106997] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.107059] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 1.107075] pci 0000:00:1f.3: reg 0x10: [mem 0xce614000-0xce6140ff 64bit]
[ 1.107096] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 1.107209] pci 0000:01:00.0: [10de:1058] type 00 class 0x030000
[ 1.107218] pci 0000:01:00.0: reg 0x10: [mem 0xca000000-0xcaffffff]
[ 1.107225] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xc7ffffff 64bit pref]
[ 1.107233] pci 0000:01:00.0: reg 0x1c: [mem 0xc8000000-0xc9ffffff 64bit pref]
[ 1.107238] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 1.107243] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 1.107295] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.114885] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.114890] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 1.114895] pci 0000:00:01.0: bridge window [mem 0xca000000-0xcaffffff]
[ 1.114901] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
[ 1.115080] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
[ 1.115164] pci 0000:02:00.0: reg 0x10: [mem 0xcde00000-0xcde00fff]
[ 1.115695] pci 0000:02:00.0: supports D1 D2
[ 1.115697] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[ 1.115779] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 1.124960] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.124965] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 1.124969] pci 0000:00:1c.0: bridge window [mem 0xcde00000-0xce5fffff]
[ 1.124975] pci 0000:00:1c.0: bridge window [mem 0xcb400000-0xcbbfffff 64bit pref]
[ 1.125099] pci 0000:03:00.0: [8086:0888] type 00 class 0x028000
[ 1.125153] pci 0000:03:00.0: reg 0x10: [mem 0xcdd00000-0xcdd01fff 64bit]
[ 1.125423] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.125468] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 1.134988] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.134995] pci 0000:00:1c.1: bridge window [mem 0xcdd00000-0xcddfffff]
[ 1.135064] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 1.135068] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 1.135072] pci 0000:00:1c.2: bridge window [mem 0xcd500000-0xcdcfffff]
[ 1.135079] pci 0000:00:1c.2: bridge window [mem 0xcbc00000-0xcc3fffff 64bit pref]
[ 1.135226] pci 0000:0c:00.0: [10ec:8168] type 00 class 0x020000
[ 1.135309] pci 0000:0c:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 1.135432] pci 0000:0c:00.0: reg 0x18: [mem 0xcc404000-0xcc404fff 64bit pref]
[ 1.135508] pci 0000:0c:00.0: reg 0x20: [mem 0xcc400000-0xcc403fff 64bit pref]
[ 1.135928] pci 0000:0c:00.0: supports D1 D2
[ 1.135929] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.136304] pci 0000:0c:00.0: System wakeup disabled by ACPI
[ 1.144991] pci 0000:00:1c.3: PCI bridge to [bus 0c]
[ 1.144995] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1.144999] pci 0000:00:1c.3: bridge window [mem 0xccd00000-0xcd4fffff]
[ 1.145006] pci 0000:00:1c.3: bridge window [mem 0xcc400000-0xcccfffff 64bit pref]
[ 1.145671] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.145717] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.145761] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.145804] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.145848] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.145892] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.145935] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.145978] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.146074] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 1.146117] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.146210] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.146212] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.146216] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.146217] vgaarb: loaded
[ 1.146218] vgaarb: bridge control possible 0000:01:00.0
[ 1.146219] vgaarb: no bridge control possible 0000:00:02.0
[ 1.146291] PCI: Using ACPI for IRQ routing
[ 1.147828] PCI: pci_cache_line_size set to 64 bytes
[ 1.147958] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 1.147960] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 1.147961] e820: reserve RAM buffer [mem 0x97522000-0x97ffffff]
[ 1.147962] e820: reserve RAM buffer [mem 0x24e600000-0x24fffffff]
[ 1.148057] NetLabel: Initializing
[ 1.148058] NetLabel: domain hash size = 128
[ 1.148059] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.148070] NetLabel: unlabeled traffic allowed by default
[ 1.148089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.148094] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.150128] Switched to clocksource hpet
[ 1.154574] pnp: PnP ACPI init
[ 1.154695] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.154698] system 00:00: [io 0x1000-0x100f] has been reserved
[ 1.154700] system 00:00: [io 0xffff] has been reserved
[ 1.154701] system 00:00: [io 0xffff] has been reserved
[ 1.154703] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 1.154705] system 00:00: [io 0x0458-0x047f] has been reserved
[ 1.154706] system 00:00: [io 0x0500-0x057f] has been reserved
[ 1.154708] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.154710] system 00:00: [io 0x06fc-0x06ff] has been reserved
[ 1.154711] system 00:00: [io 0x0700-0x0703] has been reserved
[ 1.154714] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.154742] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.154789] system 00:02: [io 0x0454-0x0457] has been reserved
[ 1.154791] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.155022] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 1.155060] pnp 00:04: Plug and Play ACPI device, IDs LEN0032 PNP0f13 (active)
[ 1.155163] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 1.155184] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.155186] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.155188] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.155190] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.155192] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.155193] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.155195] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.155197] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.155199] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.155200] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.155203] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.155354] pnp: PnP ACPI: found 6 devices
[ 1.161904] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 1.161947] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 1.161949] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 1.161951] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.161953] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 1.161956] pci 0000:00:01.0: bridge window [mem 0xca000000-0xcaffffff]
[ 1.161958] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
[ 1.161962] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.161965] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 1.161970] pci 0000:00:1c.0: bridge window [mem 0xcde00000-0xce5fffff]
[ 1.161974] pci 0000:00:1c.0: bridge window [mem 0xcb400000-0xcbbfffff 64bit pref]
[ 1.161981] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.161986] pci 0000:00:1c.1: bridge window [mem 0xcdd00000-0xcddfffff]
[ 1.161994] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 1.161997] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 1.162002] pci 0000:00:1c.2: bridge window [mem 0xcd500000-0xcdcfffff]
[ 1.162007] pci 0000:00:1c.2: bridge window [mem 0xcbc00000-0xcc3fffff 64bit pref]
[ 1.162013] pci 0000:00:1c.3: PCI bridge to [bus 0c]
[ 1.162016] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1.162020] pci 0000:00:1c.3: bridge window [mem 0xccd00000-0xcd4fffff]
[ 1.162025] pci 0000:00:1c.3: bridge window [mem 0xcc400000-0xcccfffff 64bit pref]
[ 1.162032] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.162033] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.162035] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.162036] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[ 1.162038] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 1.162040] pci_bus 0000:01: resource 1 [mem 0xca000000-0xcaffffff]
[ 1.162041] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc9ffffff 64bit pref]
[ 1.162043] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 1.162045] pci_bus 0000:02: resource 1 [mem 0xcde00000-0xce5fffff]
[ 1.162046] pci_bus 0000:02: resource 2 [mem 0xcb400000-0xcbbfffff 64bit pref]
[ 1.162048] pci_bus 0000:03: resource 1 [mem 0xcdd00000-0xcddfffff]
[ 1.162049] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 1.162051] pci_bus 0000:04: resource 1 [mem 0xcd500000-0xcdcfffff]
[ 1.162052] pci_bus 0000:04: resource 2 [mem 0xcbc00000-0xcc3fffff 64bit pref]
[ 1.162054] pci_bus 0000:0c: resource 0 [io 0x2000-0x2fff]
[ 1.162055] pci_bus 0000:0c: resource 1 [mem 0xccd00000-0xcd4fffff]
[ 1.162057] pci_bus 0000:0c: resource 2 [mem 0xcc400000-0xcccfffff 64bit pref]
[ 1.162083] NET: Registered protocol family 2
[ 1.162259] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.162397] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.162513] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.162529] TCP: reno registered
[ 1.162539] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.162565] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.162623] NET: Registered protocol family 1
[ 1.162638] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.163134] PCI: CLS 64 bytes, default 64
[ 1.163178] Unpacking initramfs...
[ 1.217219] Freeing initrd memory: 3448K (ffff880037934000 - ffff880037c92000)
[ 1.217227] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.217230] software IO TLB [mem 0x93522000-0x97522000] (64MB) mapped at [ffff880093522000-ffff880097521fff]
[ 1.217396] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 1.217497] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 1.217505] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 1.217512] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 1.217518] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 1.217572] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.217596] Scanning for low memory corruption every 60 seconds
[ 1.217867] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.217888] Initialise system trusted keyring
[ 1.218227] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.219376] zpool: loaded
[ 1.219379] zbud: loaded
[ 1.219564] VFS: Disk quotas dquot_6.5.2
[ 1.219592] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.219705] msgmni has been set to 15139
[ 1.219750] Key type big_key registered
[ 1.219959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.220000] io scheduler noop registered
[ 1.220003] io scheduler deadline registered
[ 1.220028] io scheduler cfq registered (default)
[ 1.220178] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.220640] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.220654] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.220682] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 1.220683] vesafb: scrolling: redraw
[ 1.220685] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.220698] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90004f00000, using 4160k, total 4160k
[ 1.288972] Console: switching to colour frame buffer device 170x48
[ 1.356955] fb0: VESA VGA frame buffer device
[ 1.356971] intel_idle: MWAIT substates: 0x21120
[ 1.356973] intel_idle: v0.4 model 0x3A
[ 1.356974] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.357144] GHES: HEST is not enabled!
[ 1.357202] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.357597] Linux agpgart interface v0.103
[ 1.357642] rtc_cmos 00:01: RTC can wake from S4
[ 1.357764] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.357794] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.357805] Intel P-state driver initializing.
[ 1.357930] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.358130] TCP: cubic registered
[ 1.358293] NET: Registered protocol family 10
[ 1.358683] NET: Registered protocol family 17
[ 1.359344] Loading compiled-in X.509 certificates
[ 1.359367] registered taskstats version 1
[ 1.360173] Magic number: 3:0:181
[ 1.360204] acpi device:40: hash matches
[ 1.360288] rtc_cmos 00:01: setting system clock to 2015-02-27 13:10:35 UTC (1425042635)
[ 1.360455] PM: Hibernation image not present or could not be loaded.
[ 1.361853] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 1.361856] Write protecting the kernel read-only data: 8192k
[ 1.364799] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 1.366198] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 1.375914] random: systemd-tmpfile urandom read with 5 bits of entropy available
[ 1.396048] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.408231] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.408295] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.408640] rtsx_pci 0000:02:00.0: irq 25 for MSI/MSI-X
[ 1.408680] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 25
[ 1.409430] ACPI: bus type USB registered
[ 1.409468] usbcore: registered new interface driver usbfs
[ 1.409483] usbcore: registered new interface driver hub
[ 1.409517] usbcore: registered new device driver usb
[ 1.410014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.410257] ehci-pci: EHCI PCI platform driver
[ 1.410385] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.410391] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.410406] ehci-pci 0000:00:1a.0: debug port 2
[ 1.411213] SCSI subsystem initialized
[ 1.414338] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.414355] ehci-pci 0000:00:1a.0: irq 16, io mem 0xce61a000
[ 1.414430] libata version 3.00 loaded.
[ 1.423824] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.423991] hub 1-0:1.0: USB hub found
[ 1.423998] hub 1-0:1.0: 3 ports detected
[ 1.424332] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.424340] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.424357] ehci-pci 0000:00:1d.0: debug port 2
[ 1.428270] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.428291] ehci-pci 0000:00:1d.0: irq 23, io mem 0xce619000
[ 1.437262] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.437456] hub 2-0:1.0: USB hub found
[ 1.437462] hub 2-0:1.0: 3 ports detected
[ 1.437811] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.437820] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.437931] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.437954] xhci_hcd 0000:00:14.0: irq 26 for MSI/MSI-X
[ 1.438195] hub 3-0:1.0: USB hub found
[ 1.438213] hub 3-0:1.0: 4 ports detected
[ 1.438570] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.438574] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.438718] hub 4-0:1.0: USB hub found
[ 1.438731] hub 4-0:1.0: 4 ports detected
[ 1.439038] ahci 0000:00:1f.2: version 3.0
[ 1.439167] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.439210] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.439213] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.439438] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.444391] scsi host0: ahci
[ 1.444512] scsi host1: ahci
[ 1.444623] scsi host2: ahci
[ 1.444718] scsi host3: ahci
[ 1.444815] scsi host4: ahci
[ 1.444908] scsi host5: ahci
[ 1.444948] ata1: SATA max UDMA/133 abar m2048@0xce618000 port 0xce618100 irq 27
[ 1.444950] ata2: SATA max UDMA/133 abar m2048@0xce618000 port 0xce618180 irq 27
[ 1.444951] ata3: DUMMY
[ 1.444952] ata4: DUMMY
[ 1.444953] ata5: DUMMY
[ 1.444954] ata6: DUMMY
[ 1.730855] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.744215] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.764245] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.764276] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.797611] usb 3-4: new low-speed USB device number 2 using xhci_hcd
[ 1.797770] ata2.00: ATAPI: HL-DT-ST DVDRAM GT50N, LC02, max UDMA/33
[ 1.797827] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.797837] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.797844] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.800714] ata1.00: ATA-8: WDC WD7500BPVT-08HXZT3, 03.01A03, max UDMA/133
[ 1.800720] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.802641] ata2.00: configured for UDMA/33
[ 1.803662] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.803668] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.803672] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.806523] ata1.00: configured for UDMA/133
[ 1.806778] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPVT-0 1A03 PQ: 0 ANSI: 5
[ 1.811206] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT50N LC02 PQ: 0 ANSI: 5
[ 1.826594] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.826602] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.826666] sd 0:0:0:0: [sda] Write Protect is off
[ 1.826670] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.826692] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.837610] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.837615] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.837858] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.855171] hub 1-1:1.0: USB hub found
[ 1.855285] hub 1-1:1.0: 6 ports detected
[ 1.860770] sda: sda1 sda2
[ 1.861193] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.868515] hub 2-1:1.0: USB hub found
[ 1.868729] hub 2-1:1.0: 8 ports detected
[ 1.974526] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.976903] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.979340] usbcore: registered new interface driver usbhid
[ 1.979344] usbhid: USB HID core driver
[ 1.980203] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:2188:0AE1.0001/input/input2
[ 1.980295] hid-generic 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-4/input0
[ 2.121384] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.134736] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[ 2.221412] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 2.288319] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.336108] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.134247] random: nonblocking pool is initialized
[ 3.216837] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 3.217092] systemd[1]: Detected architecture 'x86-64'.
[ 3.222766] Switched to clocksource tsc
[ 3.233014] systemd[1]: Set hostname to <captainfroster>.
[ 4.454898] systemd[1]: Cannot add dependency job for unit mpd.service, ignoring: Unit mpd.service failed to load: No such file or directory.
[ 4.455478] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.455569] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.455590] systemd[1]: Starting Root Slice.
[ 4.456730] systemd[1]: Created slice Root Slice.
[ 4.456751] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.457842] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.457860] systemd[1]: Starting User and Session Slice.
[ 4.458956] systemd[1]: Created slice User and Session Slice.
[ 4.458972] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.459938] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.459959] systemd[1]: Starting udev Kernel Socket.
[ 4.460863] systemd[1]: Listening on udev Kernel Socket.
[ 4.460879] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.461978] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.461996] systemd[1]: Starting udev Control Socket.
[ 4.462900] systemd[1]: Listening on udev Control Socket.
[ 4.462915] systemd[1]: Starting Remote File Systems.
[ 4.463828] systemd[1]: Reached target Remote File Systems.
[ 4.463846] systemd[1]: Starting System Slice.
[ 4.464788] systemd[1]: Created slice System Slice.
[ 4.464818] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.464865] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.464878] systemd[1]: Starting Swap.
[ 4.465583] systemd[1]: Reached target Swap.
[ 4.465598] systemd[1]: Expecting device dev-disk-by\x2duuid-668cf730\x2d2b9d\x2d412d\x2d8a6b\x2d4bf4639b2556.device...
[ 4.467311] systemd[1]: Starting Login Prompts.
[ 4.468090] systemd[1]: Reached target Login Prompts.
[ 4.468107] systemd[1]: Starting Journal Socket.
[ 4.468899] systemd[1]: Listening on Journal Socket.
[ 4.531965] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.534125] systemd[1]: Mounting Huge Pages File System...
[ 4.535398] systemd[1]: Starting Setup Virtual Console...
[ 4.536705] systemd[1]: Started File System Check on Root Device.
[ 4.536735] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.538232] systemd[1]: Starting udev Coldplug all Devices...
[ 4.632347] systemd[1]: Started Load Kernel Modules.
[ 4.632385] systemd[1]: Starting Apply Kernel Variables...
[ 4.633921] systemd[1]: Mounting Configuration File System...
[ 4.635279] systemd[1]: Mounted FUSE Control File System.
[ 4.635368] systemd[1]: Mounting Debug File System...
[ 4.893971] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 5.090846] systemd[1]: Listening on Journal Audit Socket.
[ 5.090884] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.092280] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.092307] systemd[1]: Starting Slices.
[ 5.093183] systemd[1]: Reached target Slices.
[ 5.111981] systemd[1]: Mounting Temporary Directory...
[ 5.162530] systemd[1]: Starting system-getty.slice.
[ 5.163636] systemd[1]: Created slice system-getty.slice.
[ 5.163662] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.164887] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.164911] systemd[1]: Starting Paths.
[ 5.165729] systemd[1]: Reached target Paths.
[ 5.165756] systemd[1]: Starting Journal Service...
[ 5.167209] systemd[1]: Starting Encrypted Volumes.
[ 5.168178] systemd[1]: Reached target Encrypted Volumes.
[ 5.168224] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.169908] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.171693] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.222224] systemd[1]: Starting Set Up Additional Binary Formats...
[ 5.225422] systemd[1]: Mounted Huge Pages File System.
[ 5.226287] systemd[1]: Mounted Configuration File System.
[ 5.227031] systemd[1]: Mounted Debug File System.
[ 5.227796] systemd[1]: Mounted Temporary Directory.
[ 5.254566] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.278072] systemd[1]: Started Remount Root and Kernel File Systems.
[ 5.299719] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.319439] systemd[1]: Started udev Coldplug all Devices.
[ 5.321017] systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 164 (systemd-binfmt)
[ 5.466486] systemd[1]: Started Apply Kernel Variables.
[ 5.476475] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 5.500661] systemd[1]: Starting Load/Save Random Seed...
[ 5.572915] systemd[1]: Started Rebuild Hardware Database.
[ 5.572950] systemd[1]: Started First Boot Wizard.
[ 5.572970] systemd[1]: Started Create System Users.
[ 5.572984] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 5.573048] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.631431] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 5.775846] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.809922] systemd[1]: Started Load/Save Random Seed.
[ 6.121109] systemd[1]: Started Create Static Device Nodes in /dev.
[ 6.122462] systemd[1]: Starting udev Kernel Device Manager...
[ 6.150298] systemd[1]: Starting Local File Systems (Pre).
[ 6.174175] systemd[1]: Reached target Local File Systems (Pre).
[ 6.174221] systemd[1]: Mounting Temporary /etc/pacman.d/gnupg directory...
[ 6.272840] systemd[1]: etc-pacman.d-gnupg.mount: Directory /etc/pacman.d/gnupg to mount over is not empty, mounting anyway.
[ 6.307931] systemd[1]: Started Setup Virtual Console.
[ 6.336689] systemd[1]: Mounted Temporary /etc/pacman.d/gnupg directory.
[ 7.155687] systemd[1]: Started udev Kernel Device Manager.
[ 7.924494] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140926/utaddress-258)
[ 7.924507] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.924514] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
[ 7.924522] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140926/utaddress-258)
[ 7.924544] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.924548] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
[ 7.924555] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140926/utaddress-258)
[ 7.924562] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.924565] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
[ 7.924586] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140926/utaddress-258)
[ 7.924594] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.924597] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.950212] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 7.950219] ACPI: Power Button [PWRB]
[ 7.950282] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 7.950472] ACPI: Lid Switch [LID0]
[ 7.950530] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.950533] ACPI: Power Button [PWRF]
[ 7.964945] mei_me 0000:00:16.0: irq 28 for MSI/MSI-X
[ 7.984943] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.984948] ACPI: Thermal Zone [TZ01] (30 C)
[ 8.081197] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.125677] cfg80211: Calling CRDA to update world regulatory domain
[ 8.196550] ACPI: Battery Slot [BAT0] (battery present)
[ 8.196716] wmi: Mapper loaded
[ 8.197255] ACPI: AC Adapter [AC] (on-line)
[ 8.226947] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 8.226953] Copyright(c) 2003- 2014 Intel Corporation
[ 8.227179] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.227323] iwlwifi 0000:03:00.0: irq 29 for MSI/MSI-X
[ 8.346021] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 8.559132] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 8.559136] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 8.559138] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 8.559141] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 8.559241] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8.699928] [drm] Initialized drm 1.1.0 20060810
[ 8.700185] Non-volatile memory driver v1.3
[ 8.702643] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
[ 8.702654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.755034] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 8.755038] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 8.755040] thinkpad_acpi: ThinkPad BIOS H0ET90WW (2.50 ), EC unknown
[ 8.755042] thinkpad_acpi: Lenovo ThinkPad Edge E430, model 3254C23
[ 8.755709] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
[ 8.777948] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 8.777951] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 8.779783] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 8.780386] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 8.781902] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 8.788406] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 8.861858] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[ 8.989201] iTCO_vendor_support: vendor-support=0
[ 9.002862] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.002875] r8169 0000:0c:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.003311] r8169 0000:0c:00.0: irq 31 for MSI/MSI-X
[ 9.003635] r8169 0000:0c:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004c92000, b8:88:e3:ef:ea:dd, XID 0c900800 IRQ 31
[ 9.003640] r8169 0000:0c:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.013755] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.013808] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 9.013922] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.066056] r8169 0000:0c:00.0 enp12s0: renamed from eth0
[ 9.100900] [drm] Memory usable by graphics device = 2048M
[ 9.100915] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 9.100917] fb: switching to inteldrmfb from VESA VGA
[ 9.100950] Console: switching to colour dummy device 80x25
[ 9.101042] [drm] Replacing VGA console driver
[ 9.119311] i915 0000:00:02.0: irq 32 for MSI/MSI-X
[ 9.119324] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.119326] [drm] Driver supports precise vblank timestamp query.
[ 9.119426] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.126062] sound hdaudioC0D0: CX20590: BIOS auto-probing.
[ 9.126567] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 9.126570] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.126572] sound hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 9.126574] sound hdaudioC0D0: mono: mono_out=0x0
[ 9.126575] sound hdaudioC0D0: inputs:
[ 9.126578] sound hdaudioC0D0: Internal Mic=0x23
[ 9.126580] sound hdaudioC0D0: Mic=0x1a
[ 9.127430] sound hdaudioC0D0: Enable sync_write for stable communication
[ 9.157423] fbcon: inteldrmfb (fb0) is primary device
[ 9.159807] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 9.159904] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 9.160013] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20140926/video-1220)
[ 9.160014] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 9.160077] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:43/LNXVIDEO:01/input/input10
[ 9.160160] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[ 9.277136] systemd[1]: Starting Sound Card.
[ 9.339497] intel_rapl: Found RAPL domain package
[ 9.339499] intel_rapl: Found RAPL domain core
[ 9.339500] intel_rapl: Found RAPL domain uncore
[ 9.349201] wl: module license 'Mixed/Proprietary' taints kernel.
[ 9.349202] Disabling lock debugging due to kernel taint
[ 9.420070] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9.420226] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 9.420332] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[ 9.420335] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 9.448904] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 9.448905] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[ 9.544278] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 9.577482] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x126c00, board id: 2273, fw id: 1214815
[ 9.577495] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 9.587615] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
[ 9.588042] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.588129] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.588221] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.639333] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 9.715463] mousedev: PS/2 mouse device common for all mice
[ 9.910748] Console: switching to colour frame buffer device 170x48
[ 9.916518] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.916522] i915 0000:00:02.0: registered panic notifier
[ 9.916565] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[ 9.916709] systemd[1]: Reached target Sound Card.
[ 9.916764] systemd[1]: Starting system-systemd\x2drfkill.slice.
[ 9.917247] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d9180a1
[ 9.917251] nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
[ 9.917253] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
[ 9.917317] systemd[1]: Created slice system-systemd\x2drfkill.slice.
[ 9.917321] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 9.917333] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 9.917337] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 9.917349] systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill1...
[ 9.921567] systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill0...
[ 9.978353] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 9.978357] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 10.097470] systemd[1]: Starting system-systemd\x2dbacklight.slice.
[ 10.097853] systemd[1]: Created slice system-systemd\x2dbacklight.slice.
[ 10.097875] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
[ 10.740978] Bluetooth: Core ver 2.19
[ 10.740998] NET: Registered protocol family 31
[ 10.741000] Bluetooth: HCI device and connection manager initialized
[ 10.741008] Bluetooth: HCI socket layer initialized
[ 10.741010] Bluetooth: L2CAP socket layer initialized
[ 10.741017] Bluetooth: SCO socket layer initialized
[ 10.750849] systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight.
[ 10.867803] media: Linux media interface: v0.10
[ 10.880174] Linux video capture interface: v2.00
[ 10.909842] uvcvideo: Found UVC 1.00 device Integrated Camera (05ca:1823)
[ 10.911805] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input15
[ 10.911937] usbcore: registered new interface driver uvcvideo
[ 10.911948] USB Video Class driver (1.1.1)
[ 10.958769] systemd[1]: Found device WDC_WD7500BPVT-08HXZT3 DATA.
[ 10.958810] systemd[1]: Mounting /media/DATA...
[ 11.166848] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.168113] systemd[1]: Mounted /media/DATA.
[ 11.168450] systemd[1]: Starting Local File Systems.
[ 11.168578] systemd[1]: Reached target Local File Systems.
[ 11.168615] systemd[1]: Started Commit a transient machine-id on disk.
[ 11.168648] systemd[1]: Started Rebuild Journal Catalog.
[ 11.168697] systemd[1]: Started Update is Completed.
[ 11.262904] usbcore: registered new interface driver btusb
[ 11.345257] systemd[1]: Started Load/Save RF Kill Switch Status of rfkill1.
[ 11.345716] systemd[1]: Started Load/Save RF Kill Switch Status of rfkill0.
[ 11.349271] systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill2...
[ 11.349962] systemd[1]: Starting Bluetooth.
[ 11.350077] systemd[1]: Reached target Bluetooth.
[ 11.390314] systemd[1]: Started Load/Save RF Kill Switch Status of rfkill2.
[ 13.638723] systemd[1]: Started Journal Service.
[ 13.859139] systemd-journald[161]: Received request to flush runtime journal from PID 1
[ 14.038849] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 14.038856] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 14.038990] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 14.038995] nouveau [ VBIOS][0000:01:00.0] version 75.19.5e.00.0c
[ 14.039571] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 14.039583] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 14.183223] nouveau 0000:01:00.0: irq 33 for MSI/MSI-X
[ 14.183233] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 14.183267] nouveau W[ PFB][0000:01:00.0][0x00000000][ffff8802420c7000] reclocking of this ram type unsupported
[ 14.183269] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 14.183271] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 14.183272] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 14.184884] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 14.234034] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 14.234051] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 14.234076] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 14.234146] nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
[ 14.234150] nouveau [ CLK][0000:01:00.0] 0f: core 475 MHz memory 900 MHz
[ 14.234294] nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz
[ 14.238094] vga_switcheroo: enabled
[ 14.238216] [TTM] Zone kernel: Available graphics memory: 3876762 kiB
[ 14.238228] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 14.238229] [TTM] Initializing pool allocator
[ 14.238234] [TTM] Initializing DMA pool allocator
[ 14.238244] nouveau [ DRM] VRAM: 1024 MiB
[ 14.238245] nouveau [ DRM] GART: 1048576 MiB
[ 14.238249] nouveau [ DRM] TMDS table version 2.0
[ 14.238251] nouveau [ DRM] DCB version 4.0
[ 14.238253] nouveau [ DRM] DCB outp 00: 02001300 00000000
[ 14.238254] nouveau [ DRM] DCB conn 01: 00000100
[ 14.238920] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.238921] [drm] Driver supports precise vblank timestamp query.
[ 14.244948] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 14.287731] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88023e24b800
[ 14.287815] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 14.287827] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 1
[ 15.500556] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 15.500561] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 15.500565] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 15.500569] NVRM: No NVIDIA graphics adapter probed!
[ 15.500571] [drm] Module unloaded
[ 15.500752] NVRM: NVIDIA init module failed!
[ 15.581223] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 15.882415] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 19.351043] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 19.351160] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 19.351169] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 20.461014] r8169 0000:0c:00.0 enp12s0: link down
[ 20.461045] r8169 0000:0c:00.0 enp12s0: link down
[ 24.387319] ------------[ cut here ]------------
[ 24.387328] WARNING: CPU: 3 PID: 895 at fs/proc/generic.c:315 proc_register+0xc8/0x150()
[ 24.387329] proc_dir_entry 'driver/nvidia' already registered
[ 24.387331] Modules linked in: nvidia(PO+) ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media btusb bluetooth joydev mousedev snd_hda_codec_hdmi nouveau coretemp wl(PO) intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm mxm_wmi snd_hda_codec_conexant snd_hda_codec_generic i915 iTCO_wdt r8169 iTCO_vendor_support ttm crct10dif_pclmul crc32_pclmul snd_hda_intel snd_hda_controller crc32c_intel ghash_clmulni_intel cryptd arc4 psmouse drm_kms_helper snd_hda_codec thinkpad_acpi rtsx_pci_ms mii memstick evdev snd_hwdep i2c_i801 snd_pcm nvram drm intel_gtt i2c_algo_bit iwldvm led_class mac80211 i2c_core snd_timer snd soundcore mac_hid serio_raw hwmon iwlwifi ac cfg80211 rfkill shpchp wmi thermal mei_me mei video battery button lpc_ich processor sch_fq_codel
[ 24.387378] ext4 crc16 mbcache jbd2 hid_generic usbhid hid sr_mod sd_mod cdrom rtsx_pci_sdmmc mmc_core atkbd libps2 ahci libahci xhci_pci xhci_hcd libata ehci_pci scsi_mod ehci_hcd usbcore rtsx_pci usb_common i8042 serio
[ 24.387395] CPU: 3 PID: 895 Comm: modprobe Tainted: P O 3.18.6-1-ARCH #1
[ 24.387396] Hardware name: LENOVO 3254C23/3254C23, BIOS H0ET90WW (2.50 ) 01/15/2013
[ 24.387398] 0000000000000000 00000000d371cb58 ffff88023be77b08 ffffffff8154fb74
[ 24.387401] 0000000000000000 ffff88023be77b60 ffff88023be77b48 ffffffff81072c41
[ 24.387403] ffffffff81b11838 ffff880242fb5b80 ffff880242bd5df3 ffff880242bd5d80
[ 24.387406] Call Trace:
[ 24.387412] [<ffffffff8154fb74>] dump_stack+0x4e/0x71
[ 24.387417] [<ffffffff81072c41>] warn_slowpath_common+0x81/0xa0
[ 24.387420] [<ffffffff81072cb5>] warn_slowpath_fmt+0x55/0x70
[ 24.387424] [<ffffffff8123aed4>] ? proc_alloc_inum+0x54/0xe0
[ 24.387427] [<ffffffff8123b028>] proc_register+0xc8/0x150
[ 24.387430] [<ffffffff8123b1b2>] proc_mkdir_data+0x52/0x80
[ 24.387433] [<ffffffff8123b1f3>] proc_mkdir_mode+0x13/0x20
[ 24.387493] [<ffffffffa14a7ffc>] nv_register_procfs+0x5c/0x210 [nvidia]
[ 24.387530] [<ffffffffa17b62e2>] nvidia_init_module+0x2e2/0x7c2 [nvidia]
[ 24.387566] [<ffffffffa17b67d7>] ? nv_drm_init+0x15/0x15 [nvidia]
[ 24.387601] [<ffffffffa17b685d>] nvidia_frontend_init_module+0x86/0x829 [nvidia]
[ 24.387604] [<ffffffff81002148>] do_one_initcall+0xd8/0x210
[ 24.387607] [<ffffffff81196c52>] ? __vunmap+0xa2/0x100
[ 24.387611] [<ffffffff810f6bd6>] load_module+0x1ea6/0x27d0
[ 24.387614] [<ffffffff810f2fb0>] ? store_uevent+0x70/0x70
[ 24.387618] [<ffffffff810f76c6>] SyS_finit_module+0xa6/0xe0
[ 24.387622] [<ffffffff815556e9>] system_call_fastpath+0x12/0x17
[ 24.387624] ---[ end trace d8a3fc5c5dff18aa ]---
[ 24.387662] Error: Driver 'nvlink' is already registered, aborting...
[ 24.388933] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 24.388936] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 24.388940] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 24.388944] NVRM: No NVIDIA graphics adapter probed!
[ 24.388946] [drm] Module unloaded
[ 24.389063] NVRM: NVIDIA init module failed!
[ 24.420114] ------------[ cut here ]------------
[ 24.420121] WARNING: CPU: 0 PID: 903 at fs/proc/generic.c:315 proc_register+0xc8/0x150()
[ 24.420122] proc_dir_entry 'driver/nvidia' already registered
[ 24.420123] Modules linked in: nvidia(PO+) ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media btusb bluetooth joydev mousedev snd_hda_codec_hdmi nouveau coretemp wl(PO) intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm mxm_wmi snd_hda_codec_conexant snd_hda_codec_generic i915 iTCO_wdt r8169 iTCO_vendor_support ttm crct10dif_pclmul crc32_pclmul snd_hda_intel snd_hda_controller crc32c_intel ghash_clmulni_intel cryptd arc4 psmouse drm_kms_helper snd_hda_codec thinkpad_acpi rtsx_pci_ms mii memstick evdev snd_hwdep i2c_i801 snd_pcm nvram drm intel_gtt i2c_algo_bit iwldvm led_class mac80211 i2c_core snd_timer snd soundcore mac_hid serio_raw hwmon iwlwifi ac cfg80211 rfkill shpchp wmi thermal mei_me mei video battery button lpc_ich processor sch_fq_codel
[ 24.420160] ext4 crc16 mbcache jbd2 hid_generic usbhid hid sr_mod sd_mod cdrom rtsx_pci_sdmmc mmc_core atkbd libps2 ahci libahci xhci_pci xhci_hcd libata ehci_pci scsi_mod ehci_hcd usbcore rtsx_pci usb_common i8042 serio
[ 24.420174] CPU: 0 PID: 903 Comm: modprobe Tainted: P W O 3.18.6-1-ARCH #1
[ 24.420176] Hardware name: LENOVO 3254C23/3254C23, BIOS H0ET90WW (2.50 ) 01/15/2013
[ 24.420177] 0000000000000000 000000000e8ded89 ffff88023c243b08 ffffffff8154fb74
[ 24.420179] 0000000000000000 ffff88023c243b60 ffff88023c243b48 ffffffff81072c41
[ 24.420181] ffffffff81b11838 ffff880242bd5d80 ffff880241d42df3 ffff880241d42d80
[ 24.420184] Call Trace:
[ 24.420188] [<ffffffff8154fb74>] dump_stack+0x4e/0x71
[ 24.420193] [<ffffffff81072c41>] warn_slowpath_common+0x81/0xa0
[ 24.420195] [<ffffffff81072cb5>] warn_slowpath_fmt+0x55/0x70
[ 24.420199] [<ffffffff8123aed4>] ? proc_alloc_inum+0x54/0xe0
[ 24.420201] [<ffffffff8123b028>] proc_register+0xc8/0x150
[ 24.420204] [<ffffffff8123b1b2>] proc_mkdir_data+0x52/0x80
[ 24.420206] [<ffffffff8123b1f3>] proc_mkdir_mode+0x13/0x20
[ 24.420255] [<ffffffffa1c9cffc>] nv_register_procfs+0x5c/0x210 [nvidia]
[ 24.420286] [<ffffffffa1fab2e2>] nvidia_init_module+0x2e2/0x7c2 [nvidia]
[ 24.420316] [<ffffffffa1fab7d7>] ? nv_drm_init+0x15/0x15 [nvidia]
[ 24.420345] [<ffffffffa1fab85d>] nvidia_frontend_init_module+0x86/0x829 [nvidia]
[ 24.420348] [<ffffffff81002148>] do_one_initcall+0xd8/0x210
[ 24.420350] [<ffffffff81196c52>] ? __vunmap+0xa2/0x100
[ 24.420353] [<ffffffff810f6bd6>] load_module+0x1ea6/0x27d0
[ 24.420356] [<ffffffff810f2fb0>] ? store_uevent+0x70/0x70
[ 24.420359] [<ffffffff810f76c6>] SyS_finit_module+0xa6/0xe0
[ 24.420362] [<ffffffff815556e9>] system_call_fastpath+0x12/0x17
[ 24.420364] ---[ end trace d8a3fc5c5dff18ab ]---
[ 24.420396] Error: Driver 'nvlink' is already registered, aborting...
[ 24.421379] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 24.421381] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 24.421383] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 24.421385] NVRM: No NVIDIA graphics adapter probed!
[ 24.421387] [drm] Module unloaded
[ 24.421504] NVRM: NVIDIA init module failed!
[ 24.598966] vboxdrv: Found 4 processor cores.
[ 24.599866] vboxdrv: fAsync=0 offMin=0xe4 offMax=0x113c
[ 24.599952] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 24.599954] vboxdrv: Successfully loaded version 4.3.22_OSE (interface 0x001a0009).
[ 25.365133] vboxpci: IOMMU not found (not registered)
[ 25.612679] r8169 0000:0c:00.0 enp12s0: link up
[ 35.375920] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 35.376023] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 35.376030] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 35.392056] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x002140 [ !ENGINE ]
[ 38.022767] usb 1-1.4: usbfs: process 1024 (FingerprintDevi) did not claim interface 0 before use
[ 45.339739] fuse init (API version 7.23)
[ 150.921200] usb 1-1.4: usbfs: process 1592 (FingerprintDevi) did not claim interface 0 before use
[ 153.720820] usb 1-1.4: usbfs: process 1598 (FingerprintDevi) did not claim interface 0 before use
[ 298.240089] usb 1-1.4: usbfs: process 1924 (FingerprintDevi) did not claim interface 0 before use
[ 301.126600] usb 1-1.4: usbfs: process 1930 (FingerprintDevi) did not claim interface 0 before uselspci - VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [GeForce 610M] (rev a1)and the xorg config file does not exist.
Btw, I'm using a Thinkpad E430.
Offline