You are not logged in.

Pages: 1

#1 2015-03-06 22:21:41

littles
Member
Registered: 2015-03-06
Posts: 5

Can't startx

After turning on my laptop (ASUS N550JK) I'm not able to start the xServer. A week ago it worked perfect.
I've tried different things like reinstalling the nvidia drivers or reinstalling every package in general.

[   163.073] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[   163.074] X Protocol Version 11, Revision 0
[   163.074] Build Operating System: Linux 3.18.6-1-ARCH x86_64 
[   163.075] Current Operating System: Linux littles-LT 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[   163.075] Kernel command line: \vmlinuz-linux initrd=intel-ucode.img root=UUID=51cb5f59-a0c6-4484-8ef0-6d1ab17d3d4a rw quiet initrd=initramfs-linux.img
[   163.076] Build Date: 22 February 2015  12:50:32PM
[   163.076]  
[   163.077] Current version of pixman: 0.32.6
[   163.078] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   163.078] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   163.080] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar  6 22:46:23 2015
[   163.081] (==) Using config file: "/etc/X11/xorg.conf"
[   163.081] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   163.082] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   163.082] (==) ServerLayout "Layout0"
[   163.082] (**) |-->Screen "Screen0" (0)
[   163.082] (**) |   |-->Monitor "Monitor0"
[   163.082] (**) |   |-->Device "Device0"
[   163.082] (**) |-->Input Device "Keyboard0"
[   163.082] (**) |-->Input Device "Mouse0"
[   163.082] (==) Automatically adding devices
[   163.082] (==) Automatically enabling devices
[   163.082] (==) Automatically adding GPU devices
[   163.082] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   163.082] 	Entry deleted from font path.
[   163.082] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   163.082] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   163.082] 	Entry deleted from font path.
[   163.082] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   163.082] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[   163.082] (==) ModulePath set to "/usr/lib/xorg/modules"
[   163.082] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   163.082] (WW) Disabling Keyboard0
[   163.082] (WW) Disabling Mouse0
[   163.082] (II) Loader magic: 0x815d80
[   163.082] (II) Module ABI versions:
[   163.082] 	X.Org ANSI C Emulation: 0.4
[   163.082] 	X.Org Video Driver: 19.0
[   163.082] 	X.Org XInput driver : 21.0
[   163.082] 	X.Org Server Extension : 9.0
[   163.084] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   163.084] (II) xfree86: Adding drm device (/dev/dri/card1)
[   163.085] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
[   163.085] (II) xfree86: Adding drm device (/dev/dri/card0)
[   163.085] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[   163.086] (--) PCI:*(0:0:2:0) 8086:0416:1043:11cd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[   163.086] (--) PCI: (0:1:0:0) 10de:1391:1043:11cd rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   163.086] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   163.086] (II) LoadModule: "glx"
[   163.086] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   163.094] (II) Module glx: vendor="NVIDIA Corporation"
[   163.094] 	compiled for 4.0.2, module version = 1.0.0
[   163.094] 	Module class: X.Org Server Extension
[   163.094] (II) NVIDIA GLX Module  346.47  Thu Feb 19 18:09:07 PST 2015
[   163.094] (II) LoadModule: "nvidia"
[   163.095] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   163.095] (II) Module nvidia: vendor="NVIDIA Corporation"
[   163.095] 	compiled for 4.0.2, module version = 1.0.0
[   163.095] 	Module class: X.Org Video Driver
[   163.095] (II) NVIDIA dlloader X Driver  346.47  Thu Feb 19 17:47:18 PST 2015
[   163.095] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   163.095] (++) using VT number 2

[   163.095] (--) controlling tty is VT number 2, auto-enabling KeepTty
[   163.095] (EE) No devices detected.
[   163.095] (EE) 
Fatal server error:
[   163.095] (EE) no screens found(EE) 
[   163.095] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   163.095] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   163.095] (EE)

Offline

#2 2015-03-06 22:44:19

f4rm0r
Member
Registered: 2011-08-23
Posts: 37

Re: Can't startx

littles wrote:

After turning on my laptop (ASUS N550JK) I'm not able to start the xServer. A week ago it worked perfect.
I've tried different things like reinstalling the nvidia drivers or reinstalling every package in general.

[   163.095] (EE) No devices detected.
[   163.095] (EE) 
Fatal server error:
[   163.095] (EE) no screens found(EE) 
[   163.095] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   163.095] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   163.095] (EE)

after looking closer, it looks like it can not find a screen.
Have you configured 

/etc/X11/xorg.conf

or

/etc/xorg.conf

?


have you checked

/etc/mkinitcpio.conf

at the line where it says MODULES""
if it says nouevau there, delete it, since that will make your Xserver to not work.

Offline

#3 2015-03-06 22:56:38

littles
Member
Registered: 2015-03-06
Posts: 5

Re: Can't startx

Hello f4rm0r,

there is no xorg.conf in /etc/. But there is a xorg.conf in /etc/X11.

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 346.35  (buildmeister@swio-display-x86-rhel47-09)  Sat Jan 10 21:58:11 PST 2015

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

In mkinitcpio.conf, there is nothing after MODULES=""

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES="piix ide_disk reiserfs"
MODULES=""

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=""

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS="base"
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS="base udev autodetect block filesystems"
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS="base udev block filesystems"
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS="base udev block mdadm encrypt filesystems"
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS="base udev block lvm2 filesystems"
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block keyboard keymap filesystems fsck"

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""

Offline

#4 2015-03-06 23:10:40

Head_on_a_Stick
Member
From: The Wirral
Registered: 2014-02-20
Posts: 9,003
Website

Re: Can't startx

I think you need to re-create your xorg.conf

Your Xorg.0.log wrote:
[   163.094] (II) NVIDIA GLX Module  346.47  Thu Feb 19 18:09:07 PST 2015
Your xorg.conf wrote:
# nvidia-xconfig:  version 346.35  (buildmeister@swio-display-x86-rhel47-09)  Sat Jan 10 21:58:11 PST 2015

I think you need to use:

# nvidia-xconfig

https://wiki.archlinux.org/index.php/NV … figuration

However, I have never used NVIDIA so I may be wrong...

Jin, Jîyan, Azadî

Offline

#5 2015-03-06 23:19:08

Raynman
Member
Registered: 2011-10-22
Posts: 1,539

Re: Can't startx

Try if it works without xorg.conf first.

Offline

#6 2015-03-06 23:57:25

littles
Member
Registered: 2015-03-06
Posts: 5

Re: Can't startx

@Head_on_a_Stick:
I tried to generate a new xorg.conf But it doens't differs from my old.

@Raynman:
I didn't know that it is possible to start an xserver without an xorg.conf.I tried to run

startx -- -config

But I'm not sure if this is correct. However, when I run this command, my screen just goes black. Maybe I did something wrong? Or is this a good sign? Also, there is no "Screen not found" in the log file. But there are some other problems

[    29.245] (EE) Unable to locate/open config file: "vt2"
[    29.280] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    29.280] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    29.285] (EE) intel(0): failed to set mode: Permission denied [13]
[    29.486] (EE) intel(0): sna_mode_check: invalid state found on pipe 0, disabling CRTC:8

Complete logfile:

[    29.244] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[    29.244] X Protocol Version 11, Revision 0
[    29.244] Build Operating System: Linux 3.18.6-1-ARCH x86_64 
[    29.244] Current Operating System: Linux littles-LT 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[    29.244] Kernel command line: \vmlinuz-linux initrd=intel-ucode.img root=UUID=51cb5f59-a0c6-4484-8ef0-6d1ab17d3d4a rw quiet initrd=initramfs-linux.img
[    29.245] Build Date: 22 February 2015  12:50:32PM
[    29.245]  
[    29.245] Current version of pixman: 0.32.6
[    29.245] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    29.245] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    29.245] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar  7 00:43:50 2015
[    29.245] (EE) Unable to locate/open config file: "vt2"
[    29.245] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    29.245] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    29.245] (==) No Layout section.  Using the first Screen section.
[    29.245] (==) No screen section available. Using defaults.
[    29.245] (**) |-->Screen "Default Screen Section" (0)
[    29.245] (**) |   |-->Monitor "<default monitor>"
[    29.245] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    29.245] (==) Automatically adding devices
[    29.245] (==) Automatically enabling devices
[    29.245] (==) Automatically adding GPU devices
[    29.245] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    29.245] 	Entry deleted from font path.
[    29.245] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    29.245] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    29.245] 	Entry deleted from font path.
[    29.245] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    29.245] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[    29.245] (==) ModulePath set to "/usr/lib/xorg/modules"
[    29.245] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    29.245] (II) Loader magic: 0x815d80
[    29.245] (II) Module ABI versions:
[    29.245] 	X.Org ANSI C Emulation: 0.4
[    29.245] 	X.Org Video Driver: 19.0
[    29.245] 	X.Org XInput driver : 21.0
[    29.245] 	X.Org Server Extension : 9.0
[    29.247] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    29.247] (II) xfree86: Adding drm device (/dev/dri/card1)
[    29.247] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
[    29.247] (II) xfree86: Adding drm device (/dev/dri/card0)
[    29.247] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[    29.248] (--) PCI:*(0:0:2:0) 8086:0416:1043:11cd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    29.248] (--) PCI: (0:1:0:0) 10de:1391:1043:11cd rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    29.248] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    29.248] (II) LoadModule: "glx"
[    29.248] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    29.255] (II) Module glx: vendor="NVIDIA Corporation"
[    29.255] 	compiled for 4.0.2, module version = 1.0.0
[    29.255] 	Module class: X.Org Server Extension
[    29.255] (II) NVIDIA GLX Module  346.47  Thu Feb 19 18:09:07 PST 2015
[    29.255] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    29.255] 	loading driver: nvidia
[    29.255] (==) Matched intel as autoconfigured driver 0
[    29.255] (==) Matched nvidia as autoconfigured driver 1
[    29.255] (==) Matched nouveau as autoconfigured driver 2
[    29.255] (==) Matched nv as autoconfigured driver 3
[    29.256] (==) Matched intel as autoconfigured driver 4
[    29.256] (==) Matched modesetting as autoconfigured driver 5
[    29.256] (==) Matched fbdev as autoconfigured driver 6
[    29.256] (==) Matched vesa as autoconfigured driver 7
[    29.256] (==) Assigned the driver to the xf86ConfigLayout
[    29.256] (II) LoadModule: "intel"
[    29.256] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    29.259] (II) Module intel: vendor="X.Org Foundation"
[    29.259] 	compiled for 1.17.1, module version = 2.99.917
[    29.259] 	Module class: X.Org Video Driver
[    29.259] 	ABI class: X.Org Video Driver, version 19.0
[    29.259] (II) LoadModule: "nvidia"
[    29.259] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    29.259] (II) Module nvidia: vendor="NVIDIA Corporation"
[    29.259] 	compiled for 4.0.2, module version = 1.0.0
[    29.259] 	Module class: X.Org Video Driver
[    29.259] (II) LoadModule: "nouveau"
[    29.259] (WW) Warning, couldn't open module nouveau
[    29.259] (II) UnloadModule: "nouveau"
[    29.259] (II) Unloading nouveau
[    29.259] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    29.259] (II) LoadModule: "nv"
[    29.259] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[    29.260] (II) Module nv: vendor="X.Org Foundation"
[    29.260] 	compiled for 1.17.0, module version = 2.1.20
[    29.260] 	Module class: X.Org Video Driver
[    29.260] 	ABI class: X.Org Video Driver, version 19.0
[    29.260] (II) LoadModule: "modesetting"
[    29.260] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    29.261] (II) Module modesetting: vendor="X.Org Foundation"
[    29.261] 	compiled for 1.17.1, module version = 1.17.1
[    29.261] 	Module class: X.Org Video Driver
[    29.261] 	ABI class: X.Org Video Driver, version 19.0
[    29.261] (II) LoadModule: "fbdev"
[    29.261] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    29.261] (II) Module fbdev: vendor="X.Org Foundation"
[    29.261] 	compiled for 1.17.0, module version = 0.4.4
[    29.261] 	Module class: X.Org Video Driver
[    29.261] 	ABI class: X.Org Video Driver, version 19.0
[    29.261] (II) LoadModule: "vesa"
[    29.261] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    29.262] (II) Module vesa: vendor="X.Org Foundation"
[    29.262] 	compiled for 1.17.0, module version = 2.3.2
[    29.262] 	Module class: X.Org Video Driver
[    29.262] 	ABI class: X.Org Video Driver, version 19.0
[    29.262] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    29.262] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    29.262] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    29.262] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    29.262] (II) NVIDIA dlloader X Driver  346.47  Thu Feb 19 17:47:18 PST 2015
[    29.262] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    29.262] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
	GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
	Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
	GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
	GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
	Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
	GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
	GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
	GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
	GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
	GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
	GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
	GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
	Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
	GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
	Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
	GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
	GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
	GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
	GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
	GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
	Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
	GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
	GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
	GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
	GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
	GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
	Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
	Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
	GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
	Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
	Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
	GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
	GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
	GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
	GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
	GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
	GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
	Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
	Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
	GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
	GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
	GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
	GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
	GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
	GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
	GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
	GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
	GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
	Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
	Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
	GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
	GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
	Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
	Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
	Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
	GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
	nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
	GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
	GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
	GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
	GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
	GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
	ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
	GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
	GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
	GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
	GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
	NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
	GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
	Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
	GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
	GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
	GeForce GTS 360M, Quadro FX 1800M
[    29.264] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    29.264] (II) FBDEV: driver for framebuffer: fbdev
[    29.264] (II) VESA: driver for VESA chipsets: vesa
[    29.264] (--) using VT number 1

[    29.269] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[    29.269] (WW) Falling back to old probe method for modesetting
[    29.269] (WW) Falling back to old probe method for fbdev
[    29.269] (II) Loading sub module "fbdevhw"
[    29.269] (II) LoadModule: "fbdevhw"
[    29.269] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    29.270] (II) Module fbdevhw: vendor="X.Org Foundation"
[    29.270] 	compiled for 1.17.1, module version = 0.0.2
[    29.270] 	ABI class: X.Org Video Driver, version 19.0
[    29.270] (WW) Falling back to old probe method for vesa
[    29.271] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[    29.271] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[    29.271] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    29.271] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    29.271] (==) intel(0): RGB weight 888
[    29.271] (==) intel(0): Default visual is TrueColor
[    29.271] (II) intel(0): Output eDP1 has no monitor section
[    29.271] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    29.271] (II) intel(0): Enabled output eDP1
[    29.271] (II) intel(0): Output VGA1 has no monitor section
[    29.271] (II) intel(0): Enabled output VGA1
[    29.271] (II) intel(0): Output DP1 has no monitor section
[    29.271] (II) intel(0): Enabled output DP1
[    29.271] (II) intel(0): Output HDMI1 has no monitor section
[    29.271] (II) intel(0): Enabled output HDMI1
[    29.271] (II) intel(0): Output HDMI2 has no monitor section
[    29.271] (II) intel(0): Enabled output HDMI2
[    29.271] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    29.271] (II) intel(0): Output VIRTUAL1 has no monitor section
[    29.271] (II) intel(0): Enabled output VIRTUAL1
[    29.271] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    29.271] (==) intel(0): TearFree disabled
[    29.271] (==) intel(0): DPI set to (96, 96)
[    29.271] (II) Loading sub module "dri2"
[    29.271] (II) LoadModule: "dri2"
[    29.271] (II) Module "dri2" already built-in
[    29.271] (II) Loading sub module "present"
[    29.271] (II) LoadModule: "present"
[    29.271] (II) Module "present" already built-in
[    29.271] (II) UnloadModule: "nvidia"
[    29.271] (II) Unloading nvidia
[    29.271] (II) UnloadModule: "nv"
[    29.271] (II) Unloading nv
[    29.271] (II) UnloadModule: "fbdev"
[    29.271] (II) Unloading fbdev
[    29.271] (II) UnloadSubModule: "fbdevhw"
[    29.271] (II) Unloading fbdevhw
[    29.271] (II) UnloadModule: "vesa"
[    29.271] (II) Unloading vesa
[    29.271] (==) Depth 24 pixmap format is 32 bpp
[    29.274] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[    29.274] (==) intel(0): Backing store enabled
[    29.274] (==) intel(0): Silken mouse enabled
[    29.275] (II) intel(0): HW Cursor enabled
[    29.275] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    29.275] (==) intel(0): DPMS enabled
[    29.275] (==) intel(0): display hotplug detection enabled
[    29.275] (II) intel(0): [DRI2] Setup complete
[    29.275] (II) intel(0): [DRI2]   DRI driver: i965
[    29.275] (II) intel(0): [DRI2]   VDPAU driver: i965
[    29.275] (II) intel(0): direct rendering: DRI2 enabled
[    29.275] (II) intel(0): hardware support for Present enabled
[    29.275] (--) RandR disabled
[    29.280] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    29.283] (II) intel(0): switch to mode 1920x1080@60.1 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    29.285] (EE) intel(0): failed to set mode: Permission denied [13]
[    29.486] (WW) intel(0): failed to restore desired modes on VT switch
[    29.486] (EE) intel(0): sna_mode_check: invalid state found on pipe 0, disabling CRTC:8
[    29.536] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[    29.536] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.536] (**) Power Button: Applying InputClass "system-keyboard"
[    29.536] (II) LoadModule: "evdev"
[    29.536] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.538] (II) Module evdev: vendor="X.Org Foundation"
[    29.538] 	compiled for 1.16.2, module version = 2.9.1
[    29.538] 	Module class: X.Org XInput Driver
[    29.538] 	ABI class: X.Org XInput driver, version 21.0
[    29.538] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 16 paused 1
[    29.539] (II) systemd-logind: releasing fd for 13:71
[    29.563] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    29.563] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    29.563] (**) Video Bus: Applying InputClass "system-keyboard"
[    29.564] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 16 paused 1
[    29.564] (II) systemd-logind: releasing fd for 13:75
[    29.583] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    29.583] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    29.583] (**) Video Bus: Applying InputClass "system-keyboard"
[    29.584] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 16 paused 1
[    29.584] (II) systemd-logind: releasing fd for 13:74
[    29.610] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    29.610] (II) No input driver specified, ignoring this device.
[    29.610] (II) This device may have been added with another device file.
[    29.610] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[    29.610] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    29.610] (**) Sleep Button: Applying InputClass "system-keyboard"
[    29.610] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 16 paused 1
[    29.610] (II) systemd-logind: releasing fd for 13:70
[    29.637] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[    29.637] (II) No input driver specified, ignoring this device.
[    29.637] (II) This device may have been added with another device file.
[    29.637] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[    29.637] (II) No input driver specified, ignoring this device.
[    29.637] (II) This device may have been added with another device file.
[    29.637] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)
[    29.637] (II) No input driver specified, ignoring this device.
[    29.637] (II) This device may have been added with another device file.
[    29.637] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[    29.637] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    29.637] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[    29.638] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 16 paused 1
[    29.638] (II) systemd-logind: releasing fd for 13:65
[    29.690] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    29.690] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    29.690] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    29.690] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[    29.690] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 1
[    29.690] (II) systemd-logind: releasing fd for 13:66
[    29.743] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    29.743] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[    29.743] (II) No input driver specified, ignoring this device.
[    29.743] (II) This device may have been added with another device file.
[    29.743] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event12)
[    29.743] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[    29.743] (**) USB2.0 UVC HD Webcam: Applying InputClass "system-keyboard"
[    29.744] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 16 paused 1
[    29.744] (II) systemd-logind: releasing fd for 13:76
[    29.796] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event4)
[    29.796] (II) No input driver specified, ignoring this device.
[    29.796] (II) This device may have been added with another device file.
[    29.797] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[    29.797] (II) No input driver specified, ignoring this device.
[    29.797] (II) This device may have been added with another device file.
[    29.797] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[    29.797] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    29.797] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[    29.797] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 16 paused 1
[    29.797] (II) systemd-logind: releasing fd for 13:73
[    29.850] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    29.850] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    29.850] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    29.850] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 16 paused 1
[    29.850] (II) systemd-logind: releasing fd for 13:64
[    29.900] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event13)
[    29.900] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    29.900] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    29.900] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    29.900] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    29.900] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    29.900] (II) LoadModule: "synaptics"
[    29.900] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    29.902] (II) Module synaptics: vendor="X.Org Foundation"
[    29.902] 	compiled for 1.16.0, module version = 1.8.1
[    29.902] 	Module class: X.Org XInput Driver
[    29.902] 	ABI class: X.Org XInput driver, version 21.0
[    29.903] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 16 paused 1
[    29.903] (II) systemd-logind: releasing fd for 13:77
[    29.956] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    29.956] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    29.957] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[    29.957] (II) No input driver specified, ignoring this device.
[    29.957] (II) This device may have been added with another device file.
[    32.208] (II) systemd-logind: got pause for 226:1
[    32.208] (II) systemd-logind: got pause for 226:0

Last edited by littles (2015-03-06 23:58:05)

Offline

#7 2015-03-07 00:08:34

lucke
Member
From: Poland
Registered: 2004-11-30
Posts: 4,019

Re: Can't startx

Try simply "startx" without having xorg.conf.

Offline

#8 2015-03-07 00:20:52

littles
Member
Registered: 2015-03-06
Posts: 5

Re: Can't startx

@lucke:
After renaming xorg.conf, gdm is trying to load (?) and a message appears:

Oh no! Something has gone wrong.
A problem has occured and the system can't recover.
Please log out and try again.
[Log out]

But nothing happens when I press enter.

Offline

#9 2015-03-07 00:23:24

Raynman
Member
Registered: 2011-10-22
Posts: 1,539

Re: Can't startx

Any new messages in the logs? With the -config (which ate the "vt2" argument) it seems to be using the intel driver, so you probably have both integrated intel graphics and an nvidia GPU? I don't have any experience with that, but it seems like the kind of setup that might require a configuration file.

Offline

#10 2015-03-07 00:34:40

littles
Member
Registered: 2015-03-06
Posts: 5

Re: Can't startx

@Raynman:
Yes, the Nvidia 850M is a hybrig graphic card. I used bumblebee and it worked. I forgot that I removed bumblebee an hour ago to test if it could help to start gdm but it didn't worked. But when I reinstalled it, I was able to boot normaly like 2 weeks ago. Now it starts gdm ^_^

Is there something I should do now? Like generating a xorg.conf?

Offline

Pages: 1

Board footer

Powered by FluxBB