perl-wx fails at check() stage

BabbyUser · 2015-02-10 21:13:40

I'm trying to install the unix-runescape-client from Yaourt.

When I run it and get to the perl-wx part, it goes okay, I see some "deprecated declarations" here and there but they go through no problem.

Test Summary Report
-------------------
t/01_load.t         (Wstat: 139 Tests: 1 Failed: 0)
  Non-zero wait status: 139
  Parse errors: Bad plan.  You planned 6 tests but ran 1.
t/04_userdata.t     (Wstat: 0 Tests: 65 Failed: 0)
  TODO passed:   25, 49, 57
Files=23, Tests=784, 12 wallclock secs ( 0.32 usr  0.05 sys +  6.36 cusr  1.08 csys =  7.81 CPU)
Result: FAIL
Failed 1/23 test programs. 0/784 subtests failed.
Makefile:1274: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
==> ERROR: A failure occurred in check().
    Aborting...
==> ERROR: Makepkg was unable to build perl-wx.
==> Restart building perl-wx ? [y/N]
==> --------------------------------
==> 
==> Restart building unix-runescape-client ? [y/N]
==> ----------------------------------------------
==>

makepkg.conf:

#
# /etc/makepkg.conf
#

#########################################################################
# SOURCE ACQUISITION
#########################################################################
#
#-- The download utilities that makepkg should use to acquire sources
#  Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
          'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
          'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
          'rsync::/usr/bin/rsync --no-motd -z %u %o'
          'scp::/usr/bin/scp -C %u %o')

# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget

#-- The package required by makepkg to download VCS sources
#  Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
            'git::git'
            'hg::mercurial'
            'svn::subversion')

#########################################################################
# ARCHITECTURE, COMPILE FLAGS
#########################################################################
#
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"

#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j2"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"

#########################################################################
# BUILD ENVIRONMENT
#########################################################################
#
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
#  A negated environment option will do the opposite of the comments below.
#
#-- distcc:   Use the Distributed C/C++/ObjC compiler
#-- color:    Colorize output messages
#-- ccache:   Use ccache to cache compilation
#-- check:    Run the check() function if present in the PKGBUILD
#-- sign:     Generate PGP signature file
#
BUILDENV=(!distcc color !ccache check !sign)
#
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg

#########################################################################
# GLOBAL PACKAGE OPTIONS
#   These are default values for the options=() settings
#########################################################################
#
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#  A negated option will do the opposite of the comments below.
#
#-- strip:      Strip symbols from binaries/libraries
#-- docs:       Save doc directories specified by DOC_DIRS
#-- libtool:    Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs:  Leave empty directories in packages
#-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge:      Remove files specified by PURGE_TARGETS
#-- upx:        Compress binary executable files using UPX
#-- debug:      Add debugging flags as specified in DEBUG_* variables
#
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)

#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)

#########################################################################
# PACKAGE OUTPUT
#########################################################################
#
# Default: put built package and cached source in build directory
#
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <john@doe.com>"
#-- Specify a key to use for package signing
#GPGKEY=""

#########################################################################
# COMPRESSION DEFAULTS
#########################################################################
#
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)

#########################################################################
# EXTENSION DEFAULTS
#########################################################################
#
# WARNING: Do NOT modify these variables unless you know what you are
#          doing.
#
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'

# vim: set ft=sh ts=2 sw=2 et:

When i run yaourt -S perl-wx it runs through but with a different summary report

perl-wx:

Test Summary Report
-------------------
t/01_load.t       (Wstat: 139 Tests: 0 Failed: 0)
  Non-zero wait status: 139
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
t/02_inheritance.t (Wstat: 139 Tests: 0 Failed: 0)
  Non-zero wait status: 139
  Parse errors: No plan found in TAP output
t/03_threads.t    (Wstat: 139 Tests: 0 Failed: 0)
  Non-zero wait status: 139
  Parse errors: Bad plan.  You planned 4 tests but ran 0.
Files=3, Tests=0,  1 wallclock secs ( 0.06 usr  0.00 sys +  0.64 cusr  0.14 csys =  0.84 CPU)
Result: FAIL
Failed 3/3 test programs. 0/0 subtests failed.
Makefile:745: recipe for target 'test_dynamic' failed
make[2]: *** [test_dynamic] Error 255
make[2]: Leaving directory '/tmp/yaourt-tmp-usr/aur-perl-wx/src/Wx-0.9923/ext/webview'
Makefile:826: recipe for target 'subdirs-test' failed
make[1]: *** [subdirs-test] Error 2
make[1]: Leaving directory '/tmp/yaourt-tmp-usr/aur-perl-wx/src/Wx-0.9923/ext'
Makefile:1270: recipe for target 'subdirs-test' failed
make: *** [subdirs-test] Error 2

BabbyUser · 2015-02-13 00:57:28

Anyone have any idea?

Sergei82 · 2015-03-15 13:48:13

try to set the language variable to this LANG="en_US.UTF-8"

Head_on_a_Stick · 2015-03-15 14:15:56

BabbyUser wrote:

I'm trying to install the unix-runescape-client from Yaourt.

What error messages (if any) do you get when using `makepkg` instead?
https://wiki.archlinux.org/index.php/Ar … g_packages

I think you may have to re-build the perl-wx package, as per the comments on the AUR page:
https://aur.archlinux.org/packages/unix … pe-client/

Arch Linux

#1 2015-02-10 21:13:40

perl-wx fails at check() stage

#2 2015-02-13 00:57:28

Re: perl-wx fails at check() stage

#3 2015-03-15 13:48:13

Re: perl-wx fails at check() stage

#4 2015-03-15 14:15:56

Re: perl-wx fails at check() stage

Board footer