Arch Linux

siv

Member

Registered: 2014-04-18

Posts: 25

HDMI output out of range

Hi guys

Basic information:
-Two graphic cards (Intel & Ati)
-Driver: xf86-video-intel and xf86-video-ati
-xrandr output:

[green@green ~]$ xrandr
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768      60.07*+  40.04  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       59.94  
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 698mm x 392mm panning 1366x768+0+0
   1920x1080     50.00 +  60.00    59.94    30.00    25.00    24.00    29.97    23.98  
   1920x1080i    60.00    50.00    59.94  
   1280x1024     60.02  
   1366x768      59.79* 
   1280x720      60.00    50.00    59.94  
   1024x768      60.00  
   800x600       60.32  
   720x576       50.00  
   720x576i      50.00  
   720x480       60.00    59.94  
   720x480i      60.00    59.94  
   640x480       60.00    59.94    59.94  
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

-xrandr providers:

[green@green ~]$ xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7e cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 5 associated providers: 0 name:Intel
Provider 1: id: 0x55 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 6 outputs: 0 associated providers: 0 name:radeon

-lspci:

[green@green ~]$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (rev ff)
07:00.0 Network controller: Ralink corp. Device 539b
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)

The problem is that if I do:

xrandr --output HDMI1 --auto

or

xrandr --output HDMI1 --mode 1920x1080

or

xrandr --output HDMI1 --mode 1920x1080i

or

xrandr --output HDMI1 --mode 1920x1080 --rate 50 (or 60)

The output on the HDTV is out of margins. I have tried to auto-adjust the aspet of the HDTV with remote controller.

Only if I down the refresh rate or resolution everything works fine:

xrandr --output HDMI1 --mode 1920x1080 --rate 30

xrandr --output HDMI1 --mode 1366x768

Is there a way to fit the border properly without decrease the refresh rate or resolution?

Thanks