You are not logged in.

Pages: 1

#1 2015-03-31 23:54:46

H3g3m0n
Member
Registered: 2009-02-01
Posts: 21

Can't switch VT's with Ctrl+Alt+Fx or Ctrl+Alt+backspace terminate

Ctrl+Alt+F2 doesn't seem to register. It's been a long term issue I have had for years. I've tried all the various fixes.

I can manually change to virtual terminals without issues using:

sudo chvt 2

Once I'm in a VT I can use Alt+Fx to change between them, until I go back into Xorg. So it's unlikely to be a graphics driver problem, most other people with similar issues complain of getting a blank screen.

Although without sudo I get

# chvt 2
Couldn't get a file descriptor referring to the console.

I have the following in /etc/X11/xorg.conf.d/15-forcevt.conf

Section "ServerFlags"
        Option "HandleSpecialKeys" "always"
        Option "DontVTSwitch" "false"
        Option "DontZap" "false"
EndSection

Section "InputClass"
    Identifier      "Keyboard Defaults"
    MatchIsKeyboard "yes"
    Option          "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection

A also enabled the terminate option in gnome-tweak-tool.

xmodmap -pke has the following:

keycode  67 = F1 F1 F1 F1 F1 F1 XF86Switch_VT_1
keycode  68 = F2 F2 F2 F2 F2 F2 XF86Switch_VT_2

Nothing is printed in Xorg logs when I try pushing the keys.

I'm using SLIM (although I tried manually via startx), AwesomeWM (also tried fluxbox with a blank conf), nvidia (proprietary), UEFI.

[  2490.220] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[  2490.225] X Protocol Version 11, Revision 0
[  2490.227] Build Operating System: Linux 3.18.6-1-ARCH x86_64 
[  2490.229] Current Operating System: Linux ender 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[  2490.229] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux root=UUID=ff84efeb-e43f-47fe-a14d-07894feb0013 rw rootflags=subvol=@ quiet
[  2490.233] Build Date: 14 March 2015  06:45:50PM
[  2490.234]  
[  2490.236] Current version of pixman: 0.32.6
[  2490.240] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2490.240] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2490.247] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr  1 10:44:03 2015
[  2490.249] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2490.250] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2490.250] (==) ServerLayout "Layout0"
[  2490.250] (**) |-->Screen "Screen0" (0)
[  2490.250] (**) |   |-->Monitor "Monitor0"
[  2490.251] (**) |   |-->Device "Device0"
[  2490.251] (**) |-->Input Device "Keyboard0"
[  2490.251] (**) |-->Input Device "Mouse0"
[  2490.251] (**) Option "DontVTSwitch" "false"
[  2490.251] (**) Option "DontZap" "false"
[  2490.251] (**) Option "Xinerama" "0"
[  2490.251] (==) Automatically adding devices
[  2490.251] (==) Automatically enabling devices
[  2490.251] (==) Automatically adding GPU devices
[  2490.251] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  2490.251] 	Entry deleted from font path.
[  2490.251] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  2490.251] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  2490.251] 	Entry deleted from font path.
[  2490.251] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  2490.251] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[  2490.251] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2490.251] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  2490.251] (WW) Disabling Keyboard0
[  2490.251] (WW) Disabling Mouse0
[  2490.251] (II) Loader magic: 0x815d80
[  2490.251] (II) Module ABI versions:
[  2490.251] 	X.Org ANSI C Emulation: 0.4
[  2490.251] 	X.Org Video Driver: 19.0
[  2490.251] 	X.Org XInput driver : 21.0
[  2490.251] 	X.Org Server Extension : 9.0
[  2490.254] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[  2490.254] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2490.254] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[  2490.258] (--) PCI:*(0:1:0:0) 10de:1180:10de:0969 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  2490.258] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2490.258] (II) LoadModule: "glx"
[  2490.258] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2490.268] (II) Module glx: vendor="NVIDIA Corporation"
[  2490.268] 	compiled for 4.0.2, module version = 1.0.0
[  2490.268] 	Module class: X.Org Server Extension
[  2490.268] (II) NVIDIA GLX Module  346.47  Thu Feb 19 18:09:07 PST 2015
[  2490.268] (II) LoadModule: "nvidia"
[  2490.268] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  2490.269] (II) Module nvidia: vendor="NVIDIA Corporation"
[  2490.269] 	compiled for 4.0.2, module version = 1.0.0
[  2490.269] 	Module class: X.Org Video Driver
[  2490.269] (II) NVIDIA dlloader X Driver  346.47  Thu Feb 19 17:47:18 PST 2015
[  2490.269] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  2490.269] (++) using VT number 1

[  2490.269] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  2490.269] (II) Loading sub module "fb"
[  2490.269] (II) LoadModule: "fb"
[  2490.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2490.269] (II) Module fb: vendor="X.Org Foundation"
[  2490.269] 	compiled for 1.17.1, module version = 1.0.0
[  2490.269] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2490.269] (II) Loading sub module "wfb"
[  2490.269] (II) LoadModule: "wfb"
[  2490.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  2490.270] (II) Module wfb: vendor="X.Org Foundation"
[  2490.270] 	compiled for 1.17.1, module version = 1.0.0
[  2490.270] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2490.270] (II) Loading sub module "ramdac"
[  2490.270] (II) LoadModule: "ramdac"
[  2490.270] (II) Module "ramdac" already built-in
[  2490.270] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  2490.270] (==) NVIDIA(0): RGB weight 888
[  2490.270] (==) NVIDIA(0): Default visual is TrueColor
[  2490.270] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  2490.270] (**) NVIDIA(0): Option "Stereo" "0"
[  2490.270] (**) NVIDIA(0): Option "SLI" "Off"
[  2490.270] (**) NVIDIA(0): Option "MultiGPU" "Off"
[  2490.270] (**) NVIDIA(0): Option "BaseMosaic" "off"
[  2490.270] (**) NVIDIA(0): Stereo disabled by request
[  2490.270] (**) NVIDIA(0): NVIDIA SLI disabled.
[  2490.270] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[  2490.271] (**) NVIDIA(0): Option "MetaModes" "DVI-I-1: nvidia-auto-select +1280+0, DVI-D-0: nvidia-auto-select +0+416"
[  2490.271] (**) NVIDIA(0): Enabling 2D acceleration
[  2490.690] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[  2490.692] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 680 (GK104) at PCI:1:0:0 (GPU-0)
[  2490.692] (--) NVIDIA(0): Memory: 2097152 kBytes
[  2490.692] (--) NVIDIA(0): VideoBIOS: 80.04.09.00.01
[  2490.692] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  2490.709] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680 at PCI:1:0:0
[  2490.709] (--) NVIDIA(0):     CRT-0
[  2490.709] (--) NVIDIA(0):     Samsung SMS27A850T (DFP-0) (boot, connected)
[  2490.709] (--) NVIDIA(0):     DFP-1
[  2490.709] (--) NVIDIA(0):     DFP-2
[  2490.709] (--) NVIDIA(0):     Samsung SyncMaster (DFP-3) (connected)
[  2490.709] (--) NVIDIA(0):     DFP-4
[  2490.709] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  2490.710] (--) NVIDIA(0): Samsung SMS27A850T (DFP-0): Internal TMDS
[  2490.710] (--) NVIDIA(GPU-0): Samsung SMS27A850T (DFP-0): 330.0 MHz maximum pixel clock
[  2490.710] (--) NVIDIA(0): DFP-1: Internal TMDS
[  2490.710] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[  2490.710] (--) NVIDIA(0): DFP-2: Internal TMDS
[  2490.710] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[  2490.710] (--) NVIDIA(0): Samsung SyncMaster (DFP-3): Internal TMDS
[  2490.710] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-3): 330.0 MHz maximum pixel clock
[  2490.710] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[  2490.710] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  2490.710] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2490.710] (**) NVIDIA(0):     device Samsung SMS27A850T (DFP-0) (Using EDID frequencies
[  2490.710] (**) NVIDIA(0):     has been enabled on all display devices.)
[  2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[  2490.710] (WW) NVIDIA(GPU-0):     mode "1920x1080" is specified in the EDID; however, the
[  2490.710] (WW) NVIDIA(GPU-0):     EDID's valid VertRefresh range (56.000-75.000 Hz) would
[  2490.710] (WW) NVIDIA(GPU-0):     exclude this mode's VertRefresh (50.0 Hz); ignoring
[  2490.710] (WW) NVIDIA(GPU-0):     VertRefresh check for mode "1920x1080".
[  2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[  2490.710] (WW) NVIDIA(GPU-0):     mode "1280x720" is specified in the EDID; however, the
[  2490.710] (WW) NVIDIA(GPU-0):     EDID's valid VertRefresh range (56.000-75.000 Hz) would
[  2490.710] (WW) NVIDIA(GPU-0):     exclude this mode's VertRefresh (50.0 Hz); ignoring
[  2490.710] (WW) NVIDIA(GPU-0):     VertRefresh check for mode "1280x720".
[  2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[  2490.710] (WW) NVIDIA(GPU-0):     mode "720x576" is specified in the EDID; however, the
[  2490.710] (WW) NVIDIA(GPU-0):     EDID's valid VertRefresh range (56.000-75.000 Hz) would
[  2490.710] (WW) NVIDIA(GPU-0):     exclude this mode's VertRefresh (50.0 Hz); ignoring
[  2490.710] (WW) NVIDIA(GPU-0):     VertRefresh check for mode "720x576".
[  2490.712] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2490.712] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-3) (Using EDID frequencies
[  2490.712] (**) NVIDIA(0):     has been enabled on all display devices.)
[  2490.713] (II) NVIDIA(0): Validated MetaModes:
[  2490.713] (II) NVIDIA(0):    
[  2490.713] (II) NVIDIA(0):     "DVI-I-1:nvidia-auto-select+1280+0,DVI-D-0:nvidia-auto-select+0+416"
[  2490.713] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1440
[  2490.742] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[  2490.742] (--) NVIDIA(0):     option
[  2490.742] (--) Depth 24 pixmap format is 32 bpp
[  2490.743] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[  2490.743] (II) NVIDIA:     access.
[  2490.746] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  2490.746] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  2490.746] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  2490.746] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  2490.746] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  2490.746] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  2490.746] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  2490.746] (II) NVIDIA(0):     Config Options in the README.
[  2490.761] (II) NVIDIA(0): Setting mode "DVI-I-1:nvidia-auto-select+1280+0,DVI-D-0:nvidia-auto-select+0+416"
[  2490.853] (==) NVIDIA(0): Disabling shared memory pixmaps
[  2490.853] (==) NVIDIA(0): Backing store enabled
[  2490.853] (==) NVIDIA(0): Silken mouse enabled
[  2490.853] (**) NVIDIA(0): DPMS enabled
[  2490.853] (II) Loading sub module "dri2"
[  2490.853] (II) LoadModule: "dri2"
[  2490.853] (II) Module "dri2" already built-in
[  2490.853] (II) NVIDIA(0): [DRI2] Setup complete
[  2490.853] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  2490.853] (--) RandR disabled
[  2490.856] (II) Initializing extension GLX
[  2490.856] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event7)
[  2490.914] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2490.914] (**) Power Button: Applying InputClass "Keyboard Defaults"
[  2490.914] (II) LoadModule: "evdev"
[  2490.914] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2490.914] (II) Module evdev: vendor="X.Org Foundation"
[  2490.914] 	compiled for 1.17.1, module version = 2.9.2
[  2490.914] 	Module class: X.Org XInput Driver
[  2490.914] 	ABI class: X.Org XInput driver, version 21.0
[  2490.915] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0
[  2490.915] (II) Using input driver 'evdev' for 'Power Button'
[  2490.915] (**) Power Button: always reports core events
[  2490.915] (**) evdev: Power Button: Device: "/dev/input/event7"
[  2490.915] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2490.915] (--) evdev: Power Button: Found keys
[  2490.915] (II) evdev: Power Button: Configuring as keyboard
[  2490.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event7"
[  2490.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2490.915] (**) Option "xkb_rules" "evdev"
[  2490.915] (**) Option "xkb_model" "pc104"
[  2490.915] (**) Option "xkb_layout" "us"
[  2490.915] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2490.940] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[  2490.940] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2490.940] (**) Power Button: Applying InputClass "Keyboard Defaults"
[  2490.941] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 31 paused 0
[  2490.941] (II) Using input driver 'evdev' for 'Power Button'
[  2490.941] (**) Power Button: always reports core events
[  2490.941] (**) evdev: Power Button: Device: "/dev/input/event6"
[  2490.941] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2490.941] (--) evdev: Power Button: Found keys
[  2490.941] (II) evdev: Power Button: Configuring as keyboard
[  2490.941] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8/event6"
[  2490.941] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  2490.941] (**) Option "xkb_rules" "evdev"
[  2490.941] (**) Option "xkb_model" "pc104"
[  2490.941] (**) Option "xkb_layout" "us"
[  2490.941] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[  2490.942] (II) No input driver specified, ignoring this device.
[  2490.942] (II) This device may have been added with another device file.
[  2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[  2490.942] (II) No input driver specified, ignoring this device.
[  2490.942] (II) This device may have been added with another device file.
[  2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event20)
[  2490.942] (II) No input driver specified, ignoring this device.
[  2490.942] (II) This device may have been added with another device file.
[  2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event21)
[  2490.942] (II) No input driver specified, ignoring this device.
[  2490.942] (II) This device may have been added with another device file.
[  2490.942] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[  2490.942] (II) No input driver specified, ignoring this device.
[  2490.942] (II) This device may have been added with another device file.
[  2490.943] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[  2490.943] (II) No input driver specified, ignoring this device.
[  2490.943] (II) This device may have been added with another device file.
[  2490.943] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[  2490.943] (II) No input driver specified, ignoring this device.
[  2490.943] (II) This device may have been added with another device file.
[  2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[  2490.943] (II) No input driver specified, ignoring this device.
[  2490.943] (II) This device may have been added with another device file.
[  2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
[  2490.943] (II) No input driver specified, ignoring this device.
[  2490.943] (II) This device may have been added with another device file.
[  2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event15)
[  2490.943] (II) No input driver specified, ignoring this device.
[  2490.943] (II) This device may have been added with another device file.
[  2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event16)
[  2490.943] (II) No input driver specified, ignoring this device.
[  2490.943] (II) This device may have been added with another device file.
[  2490.944] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
[  2490.944] (II) No input driver specified, ignoring this device.
[  2490.944] (II) This device may have been added with another device file.
[  2490.944] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/event0)
[  2490.944] (**) HID 1017:0002: Applying InputClass "evdev keyboard catchall"
[  2490.944] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[  2490.944] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
[  2490.944] (II) Using input driver 'evdev' for 'HID 1017:0002'
[  2490.944] (**) HID 1017:0002: always reports core events
[  2490.944] (**) evdev: HID 1017:0002: Device: "/dev/input/event0"
[  2490.945] (--) evdev: HID 1017:0002: Vendor 0x1017 Product 0x2
[  2490.945] (--) evdev: HID 1017:0002: Found keys
[  2490.945] (II) evdev: HID 1017:0002: Configuring as keyboard
[  2490.945] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1:1.0/0003:1017:0002.0001/input/input2/event0"
[  2490.945] (II) XINPUT: Adding extended input device "HID 1017:0002" (type: KEYBOARD, id 8)
[  2490.945] (**) Option "xkb_rules" "evdev"
[  2490.945] (**) Option "xkb_model" "pc104"
[  2490.945] (**) Option "xkb_layout" "us"
[  2490.945] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2490.945] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/event1)
[  2490.945] (**) HID 1017:0002: Applying InputClass "evdev pointer catchall"
[  2490.945] (**) HID 1017:0002: Applying InputClass "evdev keyboard catchall"
[  2490.945] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[  2490.946] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
[  2490.946] (II) Using input driver 'evdev' for 'HID 1017:0002'
[  2490.946] (**) HID 1017:0002: always reports core events
[  2490.946] (**) evdev: HID 1017:0002: Device: "/dev/input/event1"
[  2490.946] (--) evdev: HID 1017:0002: Vendor 0x1017 Product 0x2
[  2490.946] (--) evdev: HID 1017:0002: Found 9 mouse buttons
[  2490.946] (--) evdev: HID 1017:0002: Found scroll wheel(s)
[  2490.946] (--) evdev: HID 1017:0002: Found relative axes
[  2490.946] (--) evdev: HID 1017:0002: Found x and y relative axes
[  2490.946] (--) evdev: HID 1017:0002: Found absolute axes
[  2490.946] (II) evdev: HID 1017:0002: Forcing absolute x/y axes to exist.
[  2490.946] (--) evdev: HID 1017:0002: Found keys
[  2490.946] (II) evdev: HID 1017:0002: Configuring as mouse
[  2490.946] (II) evdev: HID 1017:0002: Configuring as keyboard
[  2490.946] (II) evdev: HID 1017:0002: Adding scrollwheel support
[  2490.946] (**) evdev: HID 1017:0002: YAxisMapping: buttons 4 and 5
[  2490.946] (**) evdev: HID 1017:0002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2490.946] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1:1.1/0003:1017:0002.0002/input/input3/event1"
[  2490.946] (II) XINPUT: Adding extended input device "HID 1017:0002" (type: KEYBOARD, id 9)
[  2490.946] (**) Option "xkb_rules" "evdev"
[  2490.946] (**) Option "xkb_model" "pc104"
[  2490.946] (**) Option "xkb_layout" "us"
[  2490.946] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2490.946] (II) evdev: HID 1017:0002: initialized for relative axes.
[  2490.946] (WW) evdev: HID 1017:0002: ignoring absolute axes.
[  2490.946] (**) HID 1017:0002: (accel) keeping acceleration scheme 1
[  2490.946] (**) HID 1017:0002: (accel) acceleration profile 0
[  2490.946] (**) HID 1017:0002: (accel) acceleration factor: 2.000
[  2490.946] (**) HID 1017:0002: (accel) acceleration threshold: 4
[  2490.946] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/mouse0)
[  2490.946] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[  2490.946] (II) No input driver specified, ignoring this device.
[  2490.947] (II) This device may have been added with another device file.
[  2490.947] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/event2)
[  2490.947] (**) Logitech G9x Laser Mouse: Applying InputClass "evdev pointer catchall"
[  2490.947] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 34 paused 0
[  2490.947] (II) Using input driver 'evdev' for 'Logitech G9x Laser Mouse'
[  2490.947] (**) Logitech G9x Laser Mouse: always reports core events
[  2490.947] (**) evdev: Logitech G9x Laser Mouse: Device: "/dev/input/event2"
[  2490.947] (--) evdev: Logitech G9x Laser Mouse: Vendor 0x46d Product 0xc066
[  2490.947] (--) evdev: Logitech G9x Laser Mouse: Found 20 mouse buttons
[  2490.947] (--) evdev: Logitech G9x Laser Mouse: Found scroll wheel(s)
[  2490.947] (--) evdev: Logitech G9x Laser Mouse: Found relative axes
[  2490.947] (--) evdev: Logitech G9x Laser Mouse: Found x and y relative axes
[  2490.947] (II) evdev: Logitech G9x Laser Mouse: Configuring as mouse
[  2490.947] (II) evdev: Logitech G9x Laser Mouse: Adding scrollwheel support
[  2490.947] (**) evdev: Logitech G9x Laser Mouse: YAxisMapping: buttons 4 and 5
[  2490.947] (**) evdev: Logitech G9x Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2490.947] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.3/5-1.3:1.0/0003:046D:C066.0003/input/input4/event2"
[  2490.947] (II) XINPUT: Adding extended input device "Logitech G9x Laser Mouse" (type: MOUSE, id 10)
[  2490.947] (II) evdev: Logitech G9x Laser Mouse: initialized for relative axes.
[  2490.948] (**) Logitech G9x Laser Mouse: (accel) keeping acceleration scheme 1
[  2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration profile 0
[  2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration factor: 2.000
[  2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration threshold: 4
[  2490.948] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/mouse1)
[  2490.948] (II) No input driver specified, ignoring this device.
[  2490.948] (II) This device may have been added with another device file.
[  2490.948] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/event3)
[  2490.948] (**) Logitech G9x Laser Mouse: Applying InputClass "evdev keyboard catchall"
[  2490.948] (**) Logitech G9x Laser Mouse: Applying InputClass "Keyboard Defaults"
[  2490.949] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 35 paused 0
[  2490.949] (II) Using input driver 'evdev' for 'Logitech G9x Laser Mouse'
[  2490.949] (**) Logitech G9x Laser Mouse: always reports core events
[  2490.949] (**) evdev: Logitech G9x Laser Mouse: Device: "/dev/input/event3"
[  2490.949] (--) evdev: Logitech G9x Laser Mouse: Vendor 0x46d Product 0xc066
[  2490.949] (--) evdev: Logitech G9x Laser Mouse: Found 1 mouse buttons
[  2490.949] (--) evdev: Logitech G9x Laser Mouse: Found scroll wheel(s)
[  2490.949] (--) evdev: Logitech G9x Laser Mouse: Found relative axes
[  2490.949] (II) evdev: Logitech G9x Laser Mouse: Forcing relative x/y axes to exist.
[  2490.949] (--) evdev: Logitech G9x Laser Mouse: Found absolute axes
[  2490.949] (II) evdev: Logitech G9x Laser Mouse: Forcing absolute x/y axes to exist.
[  2490.949] (--) evdev: Logitech G9x Laser Mouse: Found keys
[  2490.949] (II) evdev: Logitech G9x Laser Mouse: Configuring as mouse
[  2490.949] (II) evdev: Logitech G9x Laser Mouse: Configuring as keyboard
[  2490.949] (II) evdev: Logitech G9x Laser Mouse: Adding scrollwheel support
[  2490.949] (**) evdev: Logitech G9x Laser Mouse: YAxisMapping: buttons 4 and 5
[  2490.949] (**) evdev: Logitech G9x Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2490.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.3/5-1.3:1.1/0003:046D:C066.0004/input/input5/event3"
[  2490.949] (II) XINPUT: Adding extended input device "Logitech G9x Laser Mouse" (type: KEYBOARD, id 11)
[  2490.949] (**) Option "xkb_rules" "evdev"
[  2490.949] (**) Option "xkb_model" "pc104"
[  2490.949] (**) Option "xkb_layout" "us"
[  2490.949] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2490.949] (II) evdev: Logitech G9x Laser Mouse: initialized for relative axes.
[  2490.949] (WW) evdev: Logitech G9x Laser Mouse: ignoring absolute axes.
[  2490.949] (**) Logitech G9x Laser Mouse: (accel) keeping acceleration scheme 1
[  2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration profile 0
[  2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration factor: 2.000
[  2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration threshold: 4
[  2490.949] (II) config/udev: Adding input device USB Keyboard (/dev/input/event4)
[  2490.949] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  2490.949] (**) USB Keyboard: Applying InputClass "Keyboard Defaults"
[  2490.950] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
[  2490.950] (II) Using input driver 'evdev' for 'USB Keyboard'
[  2490.950] (**) USB Keyboard: always reports core events
[  2490.950] (**) evdev: USB Keyboard: Device: "/dev/input/event4"
[  2490.950] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x274
[  2490.950] (--) evdev: USB Keyboard: Found keys
[  2490.950] (II) evdev: USB Keyboard: Configuring as keyboard
[  2490.950] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.4/5-1.4:1.0/0003:04D9:0274.0005/input/input6/event4"
[  2490.950] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 12)
[  2490.950] (**) Option "xkb_rules" "evdev"
[  2490.950] (**) Option "xkb_model" "pc104"
[  2490.950] (**) Option "xkb_layout" "us"
[  2490.950] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2490.951] (II) config/udev: Adding input device USB Keyboard (/dev/input/event5)
[  2490.951] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  2490.951] (**) USB Keyboard: Applying InputClass "Keyboard Defaults"
[  2490.951] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 37 paused 0
[  2490.951] (II) Using input driver 'evdev' for 'USB Keyboard'
[  2490.951] (**) USB Keyboard: always reports core events
[  2490.951] (**) evdev: USB Keyboard: Device: "/dev/input/event5"
[  2490.951] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x274
[  2490.951] (--) evdev: USB Keyboard: Found 1 mouse buttons
[  2490.951] (--) evdev: USB Keyboard: Found scroll wheel(s)
[  2490.951] (--) evdev: USB Keyboard: Found relative axes
[  2490.951] (II) evdev: USB Keyboard: Forcing relative x/y axes to exist.
[  2490.951] (--) evdev: USB Keyboard: Found absolute axes
[  2490.951] (II) evdev: USB Keyboard: Forcing absolute x/y axes to exist.
[  2490.951] (--) evdev: USB Keyboard: Found keys
[  2490.951] (II) evdev: USB Keyboard: Configuring as mouse
[  2490.951] (II) evdev: USB Keyboard: Configuring as keyboard
[  2490.951] (II) evdev: USB Keyboard: Adding scrollwheel support
[  2490.951] (**) evdev: USB Keyboard: YAxisMapping: buttons 4 and 5
[  2490.951] (**) evdev: USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2490.951] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.4/5-1.4:1.1/0003:04D9:0274.0006/input/input7/event5"
[  2490.951] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 13)
[  2490.951] (**) Option "xkb_rules" "evdev"
[  2490.951] (**) Option "xkb_model" "pc104"
[  2490.951] (**) Option "xkb_layout" "us"
[  2490.951] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2490.952] (II) evdev: USB Keyboard: initialized for relative axes.
[  2490.952] (WW) evdev: USB Keyboard: ignoring absolute axes.
[  2490.952] (**) USB Keyboard: (accel) keeping acceleration scheme 1
[  2490.952] (**) USB Keyboard: (accel) acceleration profile 0
[  2490.952] (**) USB Keyboard: (accel) acceleration factor: 2.000
[  2490.952] (**) USB Keyboard: (accel) acceleration threshold: 4
[  2490.952] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event9)
[  2490.952] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  2490.952] (**) Eee PC WMI hotkeys: Applying InputClass "Keyboard Defaults"
[  2490.952] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 38 paused 0
[  2490.952] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[  2490.952] (**) Eee PC WMI hotkeys: always reports core events
[  2490.952] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event9"
[  2490.953] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[  2490.953] (--) evdev: Eee PC WMI hotkeys: Found keys
[  2490.953] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[  2490.953] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input12/event9"
[  2490.953] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[  2490.953] (**) Option "xkb_rules" "evdev"
[  2490.953] (**) Option "xkb_model" "pc104"
[  2490.953] (**) Option "xkb_layout" "us"
[  2490.953] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2490.953] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[  2490.953] (II) No input driver specified, ignoring this device.
[  2490.953] (II) This device may have been added with another device file.
[  2491.022] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2491.022] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-3) (Using EDID frequencies
[  2491.022] (**) NVIDIA(0):     has been enabled on all display devices.)
[  2491.034] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2491.034] (**) NVIDIA(0):     device Samsung SMS27A850T (DFP-0) (Using EDID frequencies
[  2491.034] (**) NVIDIA(0):     has been enabled on all display devices.)
[  2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[  2491.034] (WW) NVIDIA(GPU-0):     mode "1920x1080" is specified in the EDID; however, the
[  2491.034] (WW) NVIDIA(GPU-0):     EDID's valid VertRefresh range (56.000-75.000 Hz) would
[  2491.034] (WW) NVIDIA(GPU-0):     exclude this mode's VertRefresh (50.0 Hz); ignoring
[  2491.034] (WW) NVIDIA(GPU-0):     VertRefresh check for mode "1920x1080".
[  2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[  2491.034] (WW) NVIDIA(GPU-0):     mode "1280x720" is specified in the EDID; however, the
[  2491.034] (WW) NVIDIA(GPU-0):     EDID's valid VertRefresh range (56.000-75.000 Hz) would
[  2491.034] (WW) NVIDIA(GPU-0):     exclude this mode's VertRefresh (50.0 Hz); ignoring
[  2491.034] (WW) NVIDIA(GPU-0):     VertRefresh check for mode "1280x720".
[  2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[  2491.034] (WW) NVIDIA(GPU-0):     mode "720x576" is specified in the EDID; however, the
[  2491.034] (WW) NVIDIA(GPU-0):     EDID's valid VertRefresh range (56.000-75.000 Hz) would
[  2491.034] (WW) NVIDIA(GPU-0):     exclude this mode's VertRefresh (50.0 Hz); ignoring
[  2491.034] (WW) NVIDIA(GPU-0):     VertRefresh check for mode "720x576".

Last edited by H3g3m0n (2015-04-01 00:11:52)

Offline

#2 2015-04-01 01:20:23

WonderWoofy
Member
From: Los Gatos, CA
Registered: 2012-05-19
Posts: 8,414

Re: Can't switch VT's with Ctrl+Alt+Fx or Ctrl+Alt+backspace terminate

I'm not sure about your VT issue, but if you set the 'terminate:ctrl_alt_bksp' option with setxkbmap or loginctl, does it work then?

Offline

#3 2015-04-01 03:24:36

H3g3m0n
Member
Registered: 2009-02-01
Posts: 21

Re: Can't switch VT's with Ctrl+Alt+Fx or Ctrl+Alt+backspace terminate

WonderWoofy wrote:

I'm not sure about your VT issue, but if you set the 'terminate:ctrl_alt_bksp' option with setxkbmap or loginctl, does it work then?

I tried setxkbmap before without success.

Also tried:

localectl set-x11-keymap "us" "" "" "terminate:ctrl_alt_bksp"

Not sure how to go about using loginctl to do the same thing.

Last edited by H3g3m0n (2015-04-01 03:25:35)

Offline

#4 2015-04-01 04:30:15

WonderWoofy
Member
From: Los Gatos, CA
Registered: 2012-05-19
Posts: 8,414

Re: Can't switch VT's with Ctrl+Alt+Fx or Ctrl+Alt+backspace terminate

Sorry I meant localectl.  Was thinking one thing and typing another. neutral

Offline

Pages: 1

Board footer

Powered by FluxBB