You are not logged in.
Hi,
Update kernel to version 3.19.3-3 and also previous version have this issue, after long time of inactivity Arch no screen return, mouse nor keyboard doesn't work to up de screen.
I am not setup sleep or hirbenate options, the screen sleep like in versions 3.18 and olders, but now in this version 3.19.3-3 still have this issue.
How to know what process fail? I have to reboot by push buttom off in my desktop and screen up, but the system going to shutdown. If run the command journalctl -b -l have the present boot process, how are the correct command to read last process before to reboot?
This is not the only issue of that linux kernel release, also I dont have the folders where desktop show the wallpappers.
Any one have this issues?
Regards.
Last edited by Fitap (2015-04-21 10:24:12)
Offline
When you press the power button to reboot, do you press it shortly and the computer does a proper shutdown, or do you press it for many seconds until the computer does a hard shutdown?
If you can do a proper shutdown, you can still run commands, too. Then it is possible to install ssh and run an ssh server, and use ssh to access your computer from another coputer and debug the issue.
Offline
I press the power buttom shortly, the screen back againg and I see into the screen the correct shutdown process. I have instaled a ssh server, and I use ssh access from another computer to see what happen.
With dmesg command can I debug this issue ? or what command can I use for that job?
Offline
You need to provide some more information. Desktop or laptop, laptop screen or external, which GPU brand, etc. There are many bugs like yours which could affect you depending on this.
Also see https://wiki.archlinux.org/index.php/Su … leshooting
and
https://wiki.archlinux.org/index.php/Pm … leshooting
Last edited by teateawhy (2015-04-14 19:33:11)
Offline
I can login via SSH, what command did I use?
My computer is a desktop i7 4790k mother Asus Z97-A with Integrated Graphics Processor- Intel® HD Graphics support.
Offline
Check what's the output of this:
DISPLAY=:0 xrandr
DISPLAY=:0 xset -qand try this
DISPLAY=:0 xset +dpms s resetxset +dpms s reset
Offline
Thanks a lot teateawhy, here the results of you request over SSH session.
fitap@Desktop-i7 ~ $ DISPLAY=:0 xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected (normal left inverted right x axis y axis)
1920x1080 60.00 + 50.00 59.94 30.00 24.00 29.97 23.98
1920x1080i 60.00 50.00 59.94
1600x900 59.98
1280x1024 60.02
1280x720 60.00 50.00 30.00 59.94 29.97 24.00 23.98
1024x768 60.00
800x600 60.32
720x576 50.00
720x576i 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 60.00 59.94
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
fitap@Desktop-i7 ~ $ DISPLAY=:0 xset -q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000002
XKB indicators:
00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 20
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 0
Colors:
default colormap: 0x22 BlackPixel: 0x0 WhitePixel: 0xffffff
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/OTF/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,built-ins
DPMS (Energy Star):
Standby: 1800 Suspend: 0 Off: 3600
DPMS is Enabled
Monitor is On
fitap@Desktop-i7 ~ $ DISPLAY=:0 xset +dpms s reset
fitap@Desktop-i7 ~ $ xset +dpms s reset
xset: unable to open display ""Offline
There should be a '*' character in the xrandr output for the mode that is current. For reference:
DP1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 59.95*+
1920x1080 59.99 Try to set the current mode with xrandr:
DISPLAY=:0 xrandr --output HDMI1 --autoThis will try to set the first mode marked with '+'.
Offline
Still without '*' character in the xrandr output for the mode that is current.
fitap@Desktop-i7 ~ $ DISPLAY=:0 xrandr --output HDMI1 --auto
fitap@Desktop-i7 ~ $
fitap@Desktop-i7 ~ $ DISPLAY=:0 xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected (normal left inverted right x axis y axis)
1920x1080 60.00 + 50.00 59.94 30.00 24.00 29.97 23.98
1920x1080i 60.00 50.00 59.94
1600x900 59.98
1280x1024 60.02
1280x720 60.00 50.00 30.00 59.94 29.97 24.00 23.98
1024x768 60.00
800x600 60.32
720x576 50.00
720x576i 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 60.00 59.94
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)Offline
What happens if you switch to console with ctrl+alt+f2 and then run systemctl suspend from there? Does the monitor turn on when resuming? And try hitting ctrl+alt+f2 after resuming.
Here's another thread about this:
https://bbs.archlinux.org/viewtopic.php?id=158751
Offline
Here are the logs of pm-suspend suscefully over SSH, the system resume ok when I moved the mouse, but the monitor doesn't turn on. The same issue using systemctl suspend.
Rare...
pm-suspend.log
Initial commandline parameters:
mar abr 14 20:24:41 ART 2015: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux Desktop-i7 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64 GNU/Linux
Module Size Used by
nf_nat_ftp 12460 0
pci_stub 12429 1
xt_REDIRECT 12558 0
nf_nat_redirect 12403 1 xt_REDIRECT
vboxpci 23139 0
vboxnetflt 27412 0
nf_conntrack_ftp 16783 1 nf_nat_ftp
vboxnetadp 25443 0
ipt_REJECT 12465 0
vboxdrv 352683 3 vboxnetadp,vboxnetflt,vboxpci
nf_reject_ipv4 12491 1 ipt_REJECT
xt_multiport 12518 0
nf_log_ipv4 12565 6
nf_log_common 12586 1 nf_log_ipv4
xt_LOG 12495 6
xt_limit 12601 8
xt_tcpudp 12527 81
xt_conntrack 12681 53
iptable_nat 12711 0
nf_conntrack_ipv4 17706 54
nf_defrag_ipv4 12483 1 nf_conntrack_ipv4
nf_nat_ipv4 13075 1 iptable_nat
nf_nat 22338 3 nf_nat_ftp,nf_nat_redirect,nf_nat_ipv4
nf_conntrack 87408 6 nf_nat_ftp,nf_nat,nf_nat_ipv4,xt_conntrack,nf_conntrack_ftp,nf_conntrack_ipv4
iptable_filter 12536 1
iptable_mangle 12536 0
ip_tables 26011 3 iptable_filter,iptable_mangle,iptable_nat
x_tables 27104 10 ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,xt_multiport,iptable_filter,ipt_REJECT,xt_REDIRECT,iptable_mangle
cfg80211 476584 0
joydev 17063 0
mousedev 17272 0
coretemp 12820 0
intel_rapl 17605 0
iosf_mbi 12682 1 intel_rapl
x86_pkg_temp_thermal 12951 0
intel_powerclamp 17122 0
kvm_intel 143417 0
kvm 435299 1 kvm_intel
snd_hda_codec_realtek 67322 1
snd_hda_codec_generic 63161 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49263 1
crct10dif_pclmul 13394 0
crc32_pclmul 12915 0
crc32c_intel 21809 0
ghash_clmulni_intel 12978 0
aesni_intel 167997 0
snd_hda_intel 26387 4
snd_hda_controller 26857 1 snd_hda_intel
aes_x86_64 16719 1 aesni_intel
snd_hda_codec 112621 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
lrw 12757 1 aesni_intel
snd_hwdep 17244 1 snd_hda_codec
gf128mul 12970 1 lrw
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
eeepc_wmi 12600 0
asus_wmi 22781 1 eeepc_wmi
sparse_keymap 12818 1 asus_wmi
glue_helper 12649 1 aesni_intel
ablk_helper 12572 1 aesni_intel
e1000e 219976 0
mei_me 17987 0
tpm_infineon 16882 0
rfkill 18867 2 cfg80211,asus_wmi
hwmon 12930 2 coretemp,asus_wmi
mxm_wmi 12515 0
snd_pcm 88779 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
lpc_ich 20768 0
cryptd 18553 3 ghash_clmulni_intel,aesni_intel,ablk_helper
psmouse 107442 0
ptp 17692 1 e1000e
mei 75468 1 mei_me
shpchp 35210 0
tpm_tis 17231 0
pps_core 17225 1 ptp
dw_dmac 12610 0
serio_raw 12849 0
dw_dmac_core 21699 1 dw_dmac
i2c_i801 16965 0
tpm 31467 2 tpm_tis,tpm_infineon
pcspkr 12595 0
8250_dw 13067 0
thermal 17559 0
battery 17452 0
gpio_lynxpoint 13077 0
i2c_hid 17403 0
i2c_designware_platform 12645 0
i2c_designware_core 12813 1 i2c_designware_platform
spi_pxa2xx_platform 22562 0
processor 27777 0
evdev 21544 7
mac_hid 12633 0
wmi 17339 2 mxm_wmi,asus_wmi
fan 12726 0
acpi_pad 12919 0
sch_fq_codel 17343 2
snd_seq_dummy 12467 0
snd_seq_oss 37288 0
snd_seq_midi_event 13316 1 snd_seq_oss
snd_seq 61165 5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device 13307 3 snd_seq,snd_seq_oss,snd_seq_dummy
snd_timer 26614 2 snd_pcm,snd_seq
snd 73436 19 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_oss,snd_seq_device
soundcore 13031 2 snd,snd_hda_codec
cuse 12927 0
fuse 87590 8 cuse
ext4 514390 3
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86379 1 ext4
hid_generic 12393 0
usbhid 48596 0
hid 110513 3 i2c_hid,hid_generic,usbhid
sr_mod 21903 0
cdrom 47479 1 sr_mod
sd_mod 43575 8
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ahci 33248 5
libahci 27215 1 ahci
libata 181461 2 ahci,libahci
xhci_pci 12675 0
ehci_pci 12512 0
xhci_hcd 152471 1 xhci_pci
ehci_hcd 69979 1 ehci_pci
scsi_mod 147395 3 libata,sd_mod,sr_mod
usbcore 199382 5 ehci_hcd,ehci_pci,usbhid,xhci_hcd,xhci_pci
usb_common 12561 1 usbcore
i8042 18002 1 libps2
serio 18282 6 serio_raw,atkbd,i8042,psmouse
sdhci_acpi 12961 0
sdhci 39102 1 sdhci_acpi
led_class 12855 2 sdhci,asus_wmi
mmc_core 110613 2 sdhci,sdhci_acpi
i915 1002518 8
button 12953 1 i915
intel_gtt 17848 1 i915
i2c_algo_bit 12744 1 i915
video 22205 2 i915,asus_wmi
drm_kms_helper 98881 1 i915
drm 273079 7 i915,drm_kms_helper
i2c_core 50240 7 drm,i915,i2c_i801,i2c_hid,i2c_designware_platform,drm_kms_helper,i2c_algo_bit
total used free shared buff/cache available
Mem: 8054664 698108 1958148 79352 5398408 7053404
Swap: 0 0 0
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
mar abr 14 20:24:41 ART 2015: performing suspend
mar abr 14 20:25:06 ART 2015: Awake.
mar abr 14 20:25:06 ART 2015: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
Playing raw data '/dev/zero' : Unsigned 8 bit, Rate 8000 Hz, Mono
/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
mar abr 14 20:25:10 ART 2015: Finished.
pm-powersave.log
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:
/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.
/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for / to 0...Done.
Setting journal commit time for /home to 0...Done.
/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.
/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: línea 9: echo: error de escritura: Operación no permitida
/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sdd3 to 256...Done.
Setting readahead for /dev/sdc1 to 256...Done.
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sdd1 to 256...Done.
Setting readahead for /dev/sdd4 to 256...Done.
/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host0 to max_performance...Done.
Setting SATA APLM on host1 to max_performance...Done.
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:
/usr/lib/pm-utils/power.d/xfs_buffer false: success.
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:
/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.
/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for / to 0...Done.
Setting journal commit time for /home to 0...Done.
/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.
/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: línea 9: echo: error de escritura: Operación no permitida
/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sdd3 to 256...Done.
Setting readahead for /dev/sdc1 to 256...Done.
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sdd1 to 256...Done.
Setting readahead for /dev/sdd4 to 256...Done.
/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host0 to max_performance...Done.
Setting SATA APLM on host1 to max_performance...Done.
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:
/usr/lib/pm-utils/power.d/xfs_buffer false: success.Offline
There should be a '*' character in the xrandr output for the mode that is current. For reference:
DP1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 59.95*+ 1920x1080 59.99Try to set the current mode with xrandr:
DISPLAY=:0 xrandr --output HDMI1 --autoThis will try to set the first mode marked with '+'.
Still with screen no wake up issue, but today over SSH session I execute systemctl suspend the command execute ok and system going to suspend mode, when I stroke any keyboard of my wireless keyboard the system wakeup fine but not screen back, again over SSH session run DISPLAY=:0 xrandr --output HDMI1 --auto and screen back!, I can see the character '*' showed in current mode output. The screen back, but not solved the issue because I said, all commands runs over SSH session.
I think this issue is a bug of kernel.
Offline
Sounds like it might be this bug.
Offline
You can make a script that runs the xrandr command after waking up from suspend, see
https://wiki.archlinux.org/index.php/Po … stem-sleep .
Offline
I'm going to reading more about this issue like you said toz and teateawhy, for now the screen wake up only when I execute this command thanks to teateawhy DISPLAY=:0 xrandr --output HDMI1 --auto
I test with a script runs: DISPLAY=:0 xrandr --output HDMI1 --auto under /usr/lib/systemd/system-sleep/ like this:
wakeup.sh
#!/bin/sh
case $1/$2 in
pre/*)
DISPLAY=:0 xrandr --output HDMI1 --auto
;;
post/*)
DISPLAY=:0 xrandr --output HDMI1 --auto
;;
esacIt's ok?
This issue also talks here: https://bbs.archlinux.org/viewtopic.php … 6#p1510206
Offline
https://bbs.archlinux.org/viewtopic.php?id=194313&p=2
If you download the patched Xfce-settings from post #35 and lock it down in pacman.conf, then all will be well.(Thanks to foutrelis again.)
There is quite a few of us with this issue, but when they have patched the package it breaks other parts, so it has went from patched versions being updated, to wait and see.
Manjaro, Xubuntu and other releases all suffer the same fate (if you use HDMI), you could also downgrade, but downloading the fixed package is the quickest and cleanest way for me.
Last edited by madjock (2015-04-20 16:27:52)
Offline
Thanks a lot @madjock workaround for me that you post, also tnaks to foutrelis.
I just dowload the patch like post #35 said and runs in root mode the follow
# pacman -U xfce4-settings-4.12.0-0.5681-x86_64.pkg.tar.xz
# rebootLast edited by Fitap (2015-04-21 14:27:34)
Offline