You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2015-04-16 13:40:23
- w1zard
- Member
- Registered: 2015-04-16
- Posts: 2
[SOLVED] Xorg will not start
Installed Arch Linux, replaced the nouveau driver with the nvidia-304xx drivers. After issuing startx, Gnome does not load. I get a brief flash of the nvidia logo, and then nothing. My results:
[root@localhost ~]# cat /var/log/Xorg.0.log
[ 810.015]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 810.138] X Protocol Version 11, Revision 0
[ 810.181] Build Operating System: Linux 3.19.2-1-ARCH x86_64
[ 810.275] Current Operating System: Linux localhost 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64
[ 810.276] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9cedf7cf-9389-45b8-95a3-e30e4ae286ca rw quiet
[ 810.434] Build Date: 14 April 2015 10:34:18AM
[ 810.486]
[ 810.538] Current version of pixman: 0.32.6
[ 810.650] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 810.650] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 810.892] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 16 13:27:29 2015
[ 810.957] (==) Using config file: "/etc/X11/xorg.conf"
[ 811.025] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 811.025] (==) ServerLayout "Layout0"
[ 811.026] (**) |-->Screen "Screen0" (0)
[ 811.026] (**) | |-->Monitor "Monitor0"
[ 811.026] (**) | |-->Device "Device0"
[ 811.026] (**) |-->Input Device "Keyboard0"
[ 811.026] (**) |-->Input Device "Mouse0"
[ 811.026] (==) Automatically adding devices
[ 811.026] (==) Automatically enabling devices
[ 811.026] (==) Automatically adding GPU devices
[ 811.026] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 811.026] Entry deleted from font path.
[ 811.026] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 811.026] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 811.026] Entry deleted from font path.
[ 811.026] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 811.026] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 811.027] Entry deleted from font path.
[ 811.027] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 811.027] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 811.027] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 811.027] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 811.027] (WW) Disabling Keyboard0
[ 811.027] (WW) Disabling Mouse0
[ 811.027] (II) Loader magic: 0x815d80
[ 811.027] (II) Module ABI versions:
[ 811.027] X.Org ANSI C Emulation: 0.4
[ 811.027] X.Org Video Driver: 19.0
[ 811.027] X.Org XInput driver : 21.0
[ 811.027] X.Org Server Extension : 9.0
[ 811.032] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 811.033] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 811.034] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 811.037] (--) PCI:*(0:3:0:0) 10de:0a64:174b:3100 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[ 811.037] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 811.037] (II) LoadModule: "glx"
[ 811.038] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 811.060] (II) Module glx: vendor="NVIDIA Corporation"
[ 811.060] compiled for 4.0.2, module version = 1.0.0
[ 811.060] Module class: X.Org Server Extension
[ 811.060] (II) NVIDIA GLX Module 304.125 Mon Dec 1 20:22:48 PST 2014
[ 811.060] (II) LoadModule: "nvidia"
[ 811.061] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 811.062] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 811.062] compiled for 4.0.2, module version = 1.0.0
[ 811.062] Module class: X.Org Video Driver
[ 811.063] (II) NVIDIA dlloader X Driver 304.125 Mon Dec 1 20:00:30 PST 2014
[ 811.063] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 811.063] (++) using VT number 1
[ 811.063] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 811.063] (II) Loading sub module "fb"
[ 811.063] (II) LoadModule: "fb"
[ 811.063] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 811.064] (II) Module fb: vendor="X.Org Foundation"
[ 811.065] compiled for 1.17.1, module version = 1.0.0
[ 811.065] ABI class: X.Org ANSI C Emulation, version 0.4
[ 811.065] (II) Loading sub module "wfb"
[ 811.065] (II) LoadModule: "wfb"
[ 811.065] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 811.066] (II) Module wfb: vendor="X.Org Foundation"
[ 811.066] compiled for 1.17.1, module version = 1.0.0
[ 811.066] ABI class: X.Org ANSI C Emulation, version 0.4
[ 811.066] (II) Loading sub module "ramdac"
[ 811.066] (II) LoadModule: "ramdac"
[ 811.066] (II) Module "ramdac" already built-in
[ 811.067] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 811.067] (==) NVIDIA(0): RGB weight 888
[ 811.067] (==) NVIDIA(0): Default visual is TrueColor
[ 811.067] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 811.067] (**) NVIDIA(0): Enabling 2D acceleration
[ 811.622] (II) NVIDIA(0): NVIDIA GPU ION (GT218) at PCI:3:0:0 (GPU-0)
[ 811.622] (--) NVIDIA(0): Memory: 524288 kBytes
[ 811.622] (--) NVIDIA(0): VideoBIOS: 70.18.45.00.00
[ 811.623] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 811.623] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 811.624] (--) NVIDIA(0): Valid display device(s) on ION at PCI:3:0:0
[ 811.624] (--) NVIDIA(0): CRT-0
[ 811.624] (--) NVIDIA(0): DFP-0
[ 811.625] (--) NVIDIA(0): SAMSUNG (DFP-1) (connected)
[ 811.625] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 811.625] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 811.625] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 811.625] (--) NVIDIA(0): SAMSUNG (DFP-1): 165.0 MHz maximum pixel clock
[ 811.625] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Single Link TMDS
[ 811.625] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 811.625] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 811.625] (**) NVIDIA(0): enabled on all display devices.)
[ 811.643] (==) NVIDIA(0):
[ 811.643] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 811.643] (==) NVIDIA(0): will be used as the requested mode.
[ 811.643] (==) NVIDIA(0):
[ 811.643] (II) NVIDIA(0): Validated MetaModes:
[ 811.643] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[ 811.643] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 811.675] (--) NVIDIA(0): DPI set to (47, 48); computed from "UseEdidDpi" X config
[ 811.675] (--) NVIDIA(0): option
[ 811.675] (--) Depth 24 pixmap format is 32 bpp
[ 811.675] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 811.685] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 811.685] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 811.685] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 811.685] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 811.685] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 811.685] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 811.685] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 811.685] (II) NVIDIA(0): Config Options in the README.
[ 811.687] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 811.828] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 811.828] (==) NVIDIA(0): Backing store enabled
[ 811.828] (==) NVIDIA(0): Silken mouse enabled
[ 811.829] (**) NVIDIA(0): DPMS enabled
[ 811.830] (II) Loading sub module "dri2"
[ 811.830] (II) LoadModule: "dri2"
[ 811.830] (II) Module "dri2" already built-in
[ 811.830] (II) NVIDIA(0): [DRI2] Setup complete
[ 811.830] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 811.830] (--) RandR disabled
[ 811.851] (II) Initializing extension GLX
[ 811.851] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 811.986] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 811.986] (II) LoadModule: "evdev"
[ 811.987] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 811.988] (II) Module evdev: vendor="X.Org Foundation"
[ 811.988] compiled for 1.17.1, module version = 2.9.2
[ 811.988] Module class: X.Org XInput Driver
[ 811.988] ABI class: X.Org XInput driver, version 21.0
[ 811.989] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 28 paused 0
[ 811.989] (II) Using input driver 'evdev' for 'Power Button'
[ 811.990] (**) Power Button: always reports core events
[ 811.990] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 811.990] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 811.990] (--) evdev: Power Button: Found keys
[ 811.990] (II) evdev: Power Button: Configuring as keyboard
[ 811.990] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 811.990] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 811.990] (**) Option "xkb_rules" "evdev"
[ 811.990] (**) Option "xkb_model" "pc104"
[ 811.990] (**) Option "xkb_layout" "us"
[ 812.074] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 812.075] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 812.076] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[ 812.076] (II) Using input driver 'evdev' for 'Power Button'
[ 812.076] (**) Power Button: always reports core events
[ 812.076] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 812.076] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 812.076] (--) evdev: Power Button: Found keys
[ 812.076] (II) evdev: Power Button: Configuring as keyboard
[ 812.076] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 812.076] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 812.077] (**) Option "xkb_rules" "evdev"
[ 812.077] (**) Option "xkb_model" "pc104"
[ 812.077] (**) Option "xkb_layout" "us"
[ 812.078] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 812.078] (II) No input driver specified, ignoring this device.
[ 812.078] (II) This device may have been added with another device file.
[ 812.079] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event9)
[ 812.079] (II) No input driver specified, ignoring this device.
[ 812.079] (II) This device may have been added with another device file.
[ 812.080] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event7)
[ 812.080] (II) No input driver specified, ignoring this device.
[ 812.080] (II) This device may have been added with another device file.
[ 812.081] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event4)
[ 812.081] (II) No input driver specified, ignoring this device.
[ 812.081] (II) This device may have been added with another device file.
[ 812.082] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event5)
[ 812.082] (II) No input driver specified, ignoring this device.
[ 812.082] (II) This device may have been added with another device file.
[ 812.083] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event6)
[ 812.083] (II) No input driver specified, ignoring this device.
[ 812.083] (II) This device may have been added with another device file.
[ 812.084] (II) config/udev: Adding input device Logitech K400 (/dev/input/event3)
[ 812.084] (**) Logitech K400: Applying InputClass "evdev pointer catchall"
[ 812.084] (**) Logitech K400: Applying InputClass "evdev keyboard catchall"
[ 812.086] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 30 paused 0
[ 812.086] (II) Using input driver 'evdev' for 'Logitech K400'
[ 812.086] (**) Logitech K400: always reports core events
[ 812.086] (**) evdev: Logitech K400: Device: "/dev/input/event3"
[ 812.086] (--) evdev: Logitech K400: Vendor 0x46d Product 0x400e
[ 812.086] (--) evdev: Logitech K400: Found 20 mouse buttons
[ 812.086] (--) evdev: Logitech K400: Found scroll wheel(s)
[ 812.086] (--) evdev: Logitech K400: Found relative axes
[ 812.086] (--) evdev: Logitech K400: Found x and y relative axes
[ 812.086] (--) evdev: Logitech K400: Found absolute axes
[ 812.086] (II) evdev: Logitech K400: Forcing absolute x/y axes to exist.
[ 812.086] (--) evdev: Logitech K400: Found keys
[ 812.086] (II) evdev: Logitech K400: Configuring as mouse
[ 812.086] (II) evdev: Logitech K400: Configuring as keyboard
[ 812.086] (II) evdev: Logitech K400: Adding scrollwheel support
[ 812.087] (**) evdev: Logitech K400: YAxisMapping: buttons 4 and 5
[ 812.087] (**) evdev: Logitech K400: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 812.087] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input6/event3"
[ 812.087] (II) XINPUT: Adding extended input device "Logitech K400" (type: KEYBOARD, id 8)
[ 812.087] (**) Option "xkb_rules" "evdev"
[ 812.087] (**) Option "xkb_model" "pc104"
[ 812.087] (**) Option "xkb_layout" "us"
[ 812.088] (II) evdev: Logitech K400: initialized for relative axes.
[ 812.088] (WW) evdev: Logitech K400: ignoring absolute axes.
[ 812.088] (**) Logitech K400: (accel) keeping acceleration scheme 1
[ 812.088] (**) Logitech K400: (accel) acceleration profile 0
[ 812.088] (**) Logitech K400: (accel) acceleration factor: 2.000
[ 812.089] (**) Logitech K400: (accel) acceleration threshold: 4
[ 812.090] (II) config/udev: Adding input device Logitech K400 (/dev/input/mouse0)
[ 812.090] (II) No input driver specified, ignoring this device.
[ 812.090] (II) This device may have been added with another device file.
[ 812.091] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 812.091] (II) No input driver specified, ignoring this device.
[ 812.091] (II) This device may have been added with another device file.
[ 812.113] (II) evdev: Logitech K400: Close
[ 812.114] (II) UnloadModule: "evdev"
[ 812.114] (II) systemd-logind: releasing fd for 13:67
[ 812.199] (II) evdev: Power Button: Close
[ 812.200] (II) UnloadModule: "evdev"
[ 812.200] (II) systemd-logind: releasing fd for 13:64
[ 812.226] (II) evdev: Power Button: Close
[ 812.226] (II) UnloadModule: "evdev"
[ 812.226] (II) systemd-logind: releasing fd for 13:65
[ 812.801] (II) Server terminated successfully (0). Closing log file.I am trying to get this to work as root, and then i will use a normal user.
Last edited by w1zard (2015-04-16 16:40:20)
Offline
#2 2015-04-16 13:49:29
- smirky
- Member
- From: Bulgaria
- Registered: 2013-02-23
- Posts: 277
- Website
Re: [SOLVED] Xorg will not start
A simple Xorg log is never enough. Provide some conf files and information like: .xinitrc, GPU model, any /etc/X11/custom_modifications...
Personal spot :: https://www.smirky.net/ :: Try not to get lost!
Offline
#3 2015-04-16 14:20:31
- karol
- Archivist
- Registered: 2009-05-06
- Posts: 25,440
Re: [SOLVED] Xorg will not start
Are you starting anything in your X? The last line of the log suggests you're not, so X launches and then terminates successfully.
Offline
#4 2015-04-16 14:57:53
- w1zard
- Member
- Registered: 2015-04-16
- Posts: 2
Re: [SOLVED] Xorg will not start
Thank you for all the pointers!
Here are my results:
[root@localhost ~]# cat .xinitrc
exec startlxde
[root@localhost ~]# vi .xinitrc
[root@localhost ~]# cat .xinitrc
exec gnome-session
[root@localhost ~]# I had installed LXDE earlier, couldn't configure the font DPI, so i tried GNOME, but forgot to change .xinitrc
Thank you !
Offline
#5 2015-04-16 16:09:02
- fsckd
- Forum Fellow
- Registered: 2009-06-15
- Posts: 4,173
Re: [SOLVED] Xorg will not start
Don't forget to mark this thread as solved by editing the first post and adding [SOLVED] to the front of the thread title.
aur S & M :: forum rules :: Community Ethos
Resources for Women, POC, LGBT*, and allies
Offline
#6 2015-04-16 22:07:13
- karol
- Archivist
- Registered: 2009-05-06
- Posts: 25,440
Re: [SOLVED] Xorg will not start
Why are you running X as root?
Offline
#7 2015-04-16 22:25:16
- Raynman
- Member
- Registered: 2011-10-22
- Posts: 1,539
Re: [SOLVED] Xorg will not start
@karol:
w1zard wrote:
I am trying to get this to work as root, and then i will use a normal user.
Still a strange thing to do, but at least it's temporary.
Offline
Pages: 1