You are not logged in.

#1 2006-03-28 14:11:07

viniosity
Member
From: Washington, DC
Registered: 2005-01-22
Posts: 377
Website

Kernel and sound?

I posted this in the multimedia forum but I think it may be related to the 2.6.16 kernel so I am posting it here instead:

Sound worked last night.. but this morning it's just silence.  I can't really explain it.. I think the only update I did was grab the latest xmms and mysql.  Anyone else seeing this?

Here's the checklist:
0. I tried rebooting!
1. I'm in the audio, optical, disk groups
2. alsamixer is unmuted for Main, mono, PCM, CD
3. I've loaded snd_intel8x0 and blacklisted the snd-intel8x0m module in the modules (not hwdetect section)
4. Here is the output of lsmod | grep snd

snd_seq_device          6924  0
snd_intel8x0           29596  0
snd_ac97_codec         94624  1 snd_intel8x0
snd_ac97_bus            2176  1 snd_ac97_codec
snd_pcm_oss            38816  0
snd_mixer_oss          16384  1 snd_pcm_oss
snd_pcm                78724  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              20100  1 snd_pcm
snd                    46432  7 snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore               7776  1 snd
snd_page_alloc          8200  2 snd_intel8x0,snd_pcm

Trying to aplay a wav file gives me silence.. so does xmms, flash, and any other media player i can find. 

edit
I am almost positive that this had worked with the 2.6.16 kernel yesterday (it is my only package from testing).  But when I type dmesg | grep snd I get this output:

snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event
snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue
snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo
snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client
snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch
snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking
snd_seq_oss: Unknown symbol snd_midi_event_free
snd_seq_oss: Unknown symbol snd_midi_event_no_status
snd_seq_oss: Unknown symbol snd_use_lock_sync_helper
snd_seq_oss: Unknown symbol snd_seq_event_port_detach
snd_seq_oss: Unknown symbol snd_midi_event_new
snd_seq_oss: Unknown symbol snd_midi_event_decode
snd_seq_oss: Unknown symbol snd_seq_create_kernel_client
snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll
snd_seq_oss: Unknown symbol snd_midi_event_encode_byte
snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl
snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event
snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue
snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo
snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client
snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch
snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking
snd_seq_oss: Unknown symbol snd_midi_event_free
snd_seq_oss: Unknown symbol snd_midi_event_no_status
snd_seq_oss: Unknown symbol snd_use_lock_sync_helper
snd_seq_oss: Unknown symbol snd_seq_event_port_detach
snd_seq_oss: Unknown symbol snd_midi_event_new
snd_seq_oss: Unknown symbol snd_midi_event_decode
snd_seq_oss: Unknown symbol snd_seq_create_kernel_client
snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll
snd_seq_oss: Unknown symbol snd_midi_event_encode_byte
snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl


So is it a kernel problem?

Offline

#2 2006-03-28 14:41:07

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,260

Re: Kernel and sound?

check udev howto there your problem is listed,
remove the oss entries from modprobe.conf and all will work again, if not read udev readme carefully and then try to find a fix there.

Offline

#3 2006-03-28 15:21:05

viniosity
Member
From: Washington, DC
Registered: 2005-01-22
Posts: 377
Website

Re: Kernel and sound?

I checked the udev howto and emptied out my modprobe.conf.  Rebooted but still no sound.  The kernel error messages are gone though.

I ran alsaconf again but still no sound.. rebooted and restored alsa but still no sound..

I took out the blacklisting of snd_intel8x0m and rebooted but still no sound..

My system is dual boot so I booted into Windows just to make sure it wasn't hardware.. sound works ok in Windows XP.  This is very weird.. would unmuting CD or Line in alsamixer conflict or cause a problem?

I am out of ideas.. especially now that the kernel error is gone in dmesg.. :?

Offline

#4 2006-03-28 15:56:41

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,260

Re: Kernel and sound?

you use MOD_AUTOLOAD="yes" in rc.conf?

Offline

#5 2006-03-28 16:00:58

viniosity
Member
From: Washington, DC
Registered: 2005-01-22
Posts: 377
Website

Re: Kernel and sound?

Yes.. here is the hardware section of my rc.conf

# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=()
#
# Modules to load at boot-up (in this order)
#   - prefix a module with a ! to disable it
#
MODULES=(!usbserial snd_intel8x0 nvram ibm_acpi)

Offline

#6 2006-03-28 16:07:15

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,260

Re: Kernel and sound?

could you post your modprobe.conf?

Offline

#7 2006-03-28 16:13:09

viniosity
Member
From: Washington, DC
Registered: 2005-01-22
Posts: 377
Website

Re: Kernel and sound?

# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.10 ---
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
# --- END: Generated by ALSACONF, do not edit. ---

I had completely emptied (not erased) the file and rebooted. Then I ran alsaconf and rebooted.  When I ran alsaconf it put the above in.

Offline

#8 2006-03-28 16:18:04

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,260

Re: Kernel and sound?

try to remove the module from MODULES=
and what happens if you load the module manually?
dmesg output would be good.

Offline

#9 2006-03-28 16:26:38

viniosity
Member
From: Washington, DC
Registered: 2005-01-22
Posts: 377
Website

Re: Kernel and sound?

Hereis my current dmesg output.  I will remove the modules, reboot and see how it goes!  Thanks..

Linux version 2.6.16-ARCH (root@Wohnung) (gcc version 4.0.3) #1 SMP PREEMPT Tue Mar 28 10:35:22 CEST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
 BIOS-e820: 000000003f6e0000 - 000000003f6f5000 (ACPI data)
 BIOS-e820: 000000003f6f5000 - 000000003f700000 (ACPI NVS)
 BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
118MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 259808
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 30432 pages, LIFO batch:7
DMI present.
ACPI: RSDP (v002 IBM                                   ) @ 0x000f6c10
ACPI: XSDT (v001 IBM    TP-74    0x00002020  LTP 0x00000000) @ 0x3f6e4780
ACPI: FADT (v003 IBM    TP-74    0x00002020 IBM  0x00000001) @ 0x3f6e4800
ACPI: SSDT (v001 IBM    TP-74    0x00002020 MSFT 0x0100000e) @ 0x3f6e49b4
ACPI: ECDT (v001 IBM    TP-74    0x00002020 IBM  0x00000001) @ 0x3f6f4d61
ACPI: TCPA (v001 IBM    TP-74    0x00002020 PTL  0x00000001) @ 0x3f6f4db3
ACPI: MADT (v001 IBM    TP-74    0x00002020 IBM  0x00000001) @ 0x3f6f4de5
ACPI: MCFG (v001 IBM    TP-74    0x00002020 IBM  0x00000001) @ 0x3f6f4e3f
ACPI: BOOT (v001 IBM    TP-74    0x00002020  LTP 0x00000001) @ 0x3f6f4fd8
ACPI: DSDT (v001 IBM    TP-74    0x00002020 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
More than 8 CPUs detected and CONFIG_X86_PC cannot handle it.
Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda3 ro console=tty1 resume2=swap:/dev/sda2 acpi_sleep=s3_bios,s3_mode
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1496.535 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1022796k/1039232k available (2582k kernel code, 15644k reserved, 717k data, 244k init, 121728k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3000.74 BogoMIPS (lpj=6001486)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
Total of 1 processors activated (3000.74 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 2665k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8d8, last bus=7
PCI: Using MMCONFIG
ACPI: Subsystem revision 20060127
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: a0100000-a01fffff
  PREFETCH window: disabled.
PCI: Bus 5, cardbus bridge: 0000:04:00.0
  IO window: 00003000-000030ff
  IO window: 00003400-000034ff
  PREFETCH window: d0000000-d1ffffff
  MEM window: a2000000-a3ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 3000-6fff
  MEM window: a0200000-afffffff
  PREFETCH window: d0000000-d7ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 17
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (61 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI wakeup devices: 
 LID SLPB EXP0 EXP1 EXP2 EXP3 PCI1 DOCK USB0 USB1 USB3 USB7 AC9M 
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
Emulex LightPulse Fibre Channel SCSI driver 8.1.1
Copyright(c) 2004-2005 Emulex.  All rights reserved.
IBM TrackPoint firmware: 0x0e, buttons: 3/3
st: Version 20050830, fixed bufsize 32768, s/g segs 256
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>input: TPPS/2 IBM TrackPoint as /class/input/input1
Failed initialization of WD-7000 SCSI card!
3ware 9000 Storage Controller device driver for Linux v2.26.02.005.
sym53c416.c: Version 1.0.0-ac
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.04 
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
imm: Version 2.05 (for Linux 2.4.0)
ipr: IBM Power RAID SCSI Device Driver version: 2.1.2 (February 8, 2006)
Adaptec aacraid driver (1.1-4 Mar 28 2006 10:32:08)
nsp32: loading...
libata version 1.20 loaded.
ahci 0000:00:1f.2: version 1.2
ahci: probe of 0000:00:1f.2 failed with error -12
osst :I: Tape driver with OnStream support version 0.99.3
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
NCR53c406a: no available ports found
ata_piix 0000:00:1f.2: version 1.05
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1810 irq 14
ata1: dev 0 cfg 49:0b00 82:746b 83:5988 84:6003 85:7469 86:1808 87:6003 88:203f
ata1: dev 0 ATA-6, max UDMA/100, 117210240 sectors: LBA
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi2 : ata_piix
  Vendor: ATA       Model: HTC426060G9AT00   Rev: 00P3
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: Attached scsi disk sda
sd 2:0:0:0: Attached scsi generic sg0 type 0
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata2: disabling port
scsi3 : ata_piix
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT misc device (ioctl) driver 3.03.07
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT SAS Host driver 3.03.07
Fusion MPT SPI Host driver 3.03.07
Fusion MPT FC Host driver 3.03.07
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 2.6.10)
JFS: nTxBlock = 8014, nTxLock = 64116
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 244k freed
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 55447 usecs
intel8x0: clocking to 48000
Non-volatile memory driver v1.2
ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
ibm_acpi: http://ibm-acpi.sf.net/
ibm_acpi: dock device not present
ibm_acpi: bay device not present
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 7932K stolen memory.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
agpgart: AGP aperture is 256M @ 0xc0000000
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hw_random: RNG not detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xa0040000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
tg3.c:v3.49 (Feb 2, 2006)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:0a:e4:33:33:1b
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 22
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1e.3 to 64
usb 3-2: new full speed USB device using uhci_hcd and address 2
MC'97 1 converters and GPIO not ready (0xff00)
usb 3-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 17
Yenta: CardBus bridge found at 0000:04:00.0 [1014:0555]
Yenta: ISA IRQ mask 0x0cb8, PCI irq 17
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x6fff
cs: IO port probe 0x3000-0x6fff: clean.
pcmcia: parent PCI bridge Memory window: 0xa0200000 - 0xafffffff
pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 23
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
NET: Registered protocol family 23
input: PC Speaker as /class/input/input2
Real Time Clock Driver v1.12ac
cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
EXT3 FS on sda3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[drm] Initialized i915 1.4.0 20060119 on minor 0
eth1: no IPv6 routers present
ipw2200: Firmware error detected.  Restarting.
ipw2200: Sysfs 'error' log captured.
ACPI: PCI interrupt for device 0000:04:02.0 disabled
ehci_hcd 0000:00:1d.7: remove, state 1
usb usb5: USB disconnect, address 1
ehci_hcd 0000:00:1d.7: USB bus 5 deregistered
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
uhci_hcd 0000:00:1d.3: remove, state 1
usb usb4: USB disconnect, address 1
uhci_hcd 0000:00:1d.3: USB bus 4 deregistered
ACPI: PCI interrupt for device 0000:00:1d.3 disabled
uhci_hcd 0000:00:1d.2: remove, state 1
usb usb3: USB disconnect, address 1
usb 3-2: USB disconnect, address 2
uhci_hcd 0000:00:1d.2: USB bus 3 deregistered
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
uhci_hcd 0000:00:1d.1: remove, state 1
usb usb2: USB disconnect, address 1
uhci_hcd 0000:00:1d.1: USB bus 2 deregistered
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
uhci_hcd 0000:00:1d.0: remove, state 1
usb usb1: USB disconnect, address 1
uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Freezing cpus ...
Stopping tasks: ===============================================================================================================|
ACPI: PCI interrupt for device 0000:04:00.0 disabled
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
ACPI: PCI interrupt for device 0000:00:1e.2 disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1e.2 to 64
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1e.3 to 64
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 17
pnp: Device 00:07 does not supported activation.
pnp: Device 00:08 does not supported activation.
ata1: dev 0 configured for UDMA/100
Restarting tasks... done
Thawing cpus ...
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 23
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xa0040000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
eth1: no IPv6 routers present

Offline

#10 2006-03-28 16:36:13

viniosity
Member
From: Washington, DC
Registered: 2005-01-22
Posts: 377
Website

Re: Kernel and sound?

I removed everything from the Modules section but still no sound..

Offline

#11 2006-03-28 16:37:08

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,260

Re: Kernel and sound?

is the module loaded or not?

Offline

#12 2006-03-28 16:42:54

viniosity
Member
From: Washington, DC
Registered: 2005-01-22
Posts: 377
Website

Re: Kernel and sound?

I believe so.  Here is the output from lsmod | grep snd after removing everything from MODULES= in rc.conf

snd_seq_oss            31716  0
snd_seq_midi_event      6400  1 snd_seq_oss
snd_seq                49996  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          6924  2 snd_seq_oss,snd_seq
snd_pcm_oss            38816  0
snd_mixer_oss          16384  1 snd_pcm_oss
snd_intel8x0           29596  0
snd_intel8x0m          14476  0
snd_ac97_codec         94624  2 snd_intel8x0,snd_intel8x0m
snd_ac97_bus            2176  1 snd_ac97_codec
snd_pcm                78724  4 snd_pcm_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec
snd_timer              20100  2 snd_seq,snd_pcm
snd                    46432  10 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
soundcore               7776  1 snd
snd_page_alloc          8200  3 snd_intel8x0,snd_intel8x0m,snd_pcm

I tried modprobe -r snd_intel8x0m in case there was a conflict there but that did not help either.

Offline

#13 2006-03-28 16:45:06

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,260

Re: Kernel and sound?

you have a correct /dev/dsp device?
if yes then start your mixer and set everything right add alsa to DAEMONS=
and you are done your channels are only muted then.

Offline

#14 2006-03-28 17:04:50

viniosity
Member
From: Washington, DC
Registered: 2005-01-22
Posts: 377
Website

Re: Kernel and sound?

Hmmm.. everything seems to be working now.  I feel like I've just observed some grand master pulling off a trick.. how did you do it?  Was it just a matter of me removing the snd_intel8x0 from the modules section?

I'm confused but extremely grateful for your help!

Offline

#15 2006-03-28 17:09:30

tpowa
Developer
From: Lauingen , Germany
Registered: 2004-04-05
Posts: 2,260

Re: Kernel and sound?

well, investigate modules only if they don't work, else let it autoload by udev that's all.
Only change stuff if it doesn't work and you know what you are doing, alsa is sometimes a bit tricky and if the user does something wrong it fails often.

Offline

Board footer

Powered by FluxBB