You are not logged in.
- Topics: Active | Unanswered
#1 2015-06-11 21:03:57
- lbrown
- Member
- Registered: 2014-09-09
- Posts: 1
nvidia GeForce GT620 using nouveau driver produces black screen
A week ago I did my first 'pacman -Syu' and hosed my initial, functioning, double-headed setup. I have tried many ideas gleaned from the wiki and other related sites to no avail.
Problem: startx yields a black screen which can only be exited by ctl-alt-F2 and kill x. I find no discernible hints in any of the accompanying outputs. Hopefully, your keener, more experienced eye can. Advanced thanks for your efforts on my behalf.
Xorg.0.log
[ 8026.114]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 8026.115] X Protocol Version 11, Revision 0
[ 8026.115] Build Operating System: Linux 3.19.2-1-ARCH i686
[ 8026.116] Current Operating System: Linux arch 4.0.4-2-ARCH #1 SMP PREEMPT Fri May 22 03:19:32 UTC 2015 i686
[ 8026.116] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b7595f65-56b5-4bde-9dfa-9df8f9ac9806 rw quiet
[ 8026.117] Build Date: 14 April 2015 10:36:09AM
[ 8026.117]
[ 8026.117] Current version of pixman: 0.32.6
[ 8026.118] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8026.118] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8026.120] (==) Log file: "/home/lbrown/.local/share/xorg/Xorg.0.log", Time: Thu Jun 11 12:59:58 2015
[ 8026.140] (==) Using config file: "/etc/X11/xorg.conf"
[ 8026.140] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8026.168] (==) No Layout section. Using the first Screen section.
[ 8026.168] (==) No screen section available. Using defaults.
[ 8026.168] (**) |-->Screen "Default Screen Section" (0)
[ 8026.168] (**) | |-->Monitor "<default monitor>"
[ 8026.169] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 8026.169] (**) | |-->Device "Card0"
[ 8026.169] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8026.169] (==) Automatically adding devices
[ 8026.169] (==) Automatically enabling devices
[ 8026.169] (==) Automatically adding GPU devices
[ 8026.193] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 8026.193] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8026.193] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8026.193] (II) Loader magic: 0x829e700
[ 8026.193] (II) Module ABI versions:
[ 8026.193] X.Org ANSI C Emulation: 0.4
[ 8026.193] X.Org Video Driver: 19.0
[ 8026.193] X.Org XInput driver : 21.0
[ 8026.193] X.Org Server Extension : 9.0
[ 8026.195] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 8026.195] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8026.195] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 8026.197] (--) PCI:*(0:1:0:0) 10de:0f01:3842:2625 rev 161, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[ 8026.197] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 8026.197] (II) LoadModule: "glx"
[ 8026.204] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8026.301] (II) Module glx: vendor="X.Org Foundation"
[ 8026.301] compiled for 1.17.1, module version = 1.0.0
[ 8026.301] ABI class: X.Org Server Extension, version 9.0
[ 8026.301] (==) AIGLX enabled
[ 8026.301] (II) LoadModule: "nouveau"
[ 8026.301] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 8026.336] (II) Module nouveau: vendor="X.Org Foundation"
[ 8026.336] compiled for 1.17.0, module version = 1.0.11
[ 8026.336] Module class: X.Org Video Driver
[ 8026.336] ABI class: X.Org Video Driver, version 19.0
[ 8026.336] (II) NOUVEAU driver
[ 8026.336] (II) NOUVEAU driver for NVIDIA chipset families :
[ 8026.336] RIVA TNT (NV04)
[ 8026.336] RIVA TNT2 (NV05)
[ 8026.336] GeForce 256 (NV10)
[ 8026.336] GeForce 2 (NV11, NV15)
[ 8026.336] GeForce 4MX (NV17, NV18)
[ 8026.336] GeForce 3 (NV20)
[ 8026.336] GeForce 4Ti (NV25, NV28)
[ 8026.336] GeForce FX (NV3x)
[ 8026.336] GeForce 6 (NV4x)
[ 8026.336] GeForce 7 (G7x)
[ 8026.336] GeForce 8 (G8x)
[ 8026.336] GeForce GTX 200 (NVA0)
[ 8026.336] GeForce GTX 400 (NVC0)
[ 8026.336] (++) using VT number 1
[ 8026.336] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 8026.336] (II) [drm] nouveau interface version: 1.2.1
[ 8026.336] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 8026.336] (II) Loading sub module "dri2"
[ 8026.336] (II) LoadModule: "dri2"
[ 8026.336] (II) Module "dri2" already built-in
[ 8026.336] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
[ 8026.336] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8026.336] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 8026.336] (==) NOUVEAU(0): RGB weight 888
[ 8026.336] (==) NOUVEAU(0): Default visual is TrueColor
[ 8026.336] (==) NOUVEAU(0): Using HW cursor
[ 8026.336] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 8026.336] (==) NOUVEAU(0): Page flipping enabled
[ 8026.336] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 8026.336] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 8026.336] (II) NOUVEAU(0): Initializing outputs ...
[ 8026.371] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 8026.405] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 8026.406] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 8026.406] (II) NOUVEAU(0): 3 crtcs needed for screen.
[ 8026.408] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 8026.408] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 8026.442] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 8026.442] (II) NOUVEAU(0): Manufacturer: GWY Model: 8ed Serial#: 0
[ 8026.442] (II) NOUVEAU(0): Year: 2007 Week: 1
[ 8026.442] (II) NOUVEAU(0): EDID Version: 1.3
[ 8026.442] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 8026.442] (II) NOUVEAU(0): Sync: Separate
[ 8026.442] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48 vert.: 30
[ 8026.442] (II) NOUVEAU(0): Gamma: 2.20
[ 8026.442] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 8026.442] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 8026.442] (II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
[ 8026.442] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
[ 8026.442] (II) NOUVEAU(0): Supported established timings:
[ 8026.442] (II) NOUVEAU(0): 720x400@70Hz
[ 8026.442] (II) NOUVEAU(0): 640x480@60Hz
[ 8026.442] (II) NOUVEAU(0): 640x480@72Hz
[ 8026.442] (II) NOUVEAU(0): 640x480@75Hz
[ 8026.442] (II) NOUVEAU(0): 800x600@56Hz
[ 8026.442] (II) NOUVEAU(0): 800x600@60Hz
[ 8026.443] (II) NOUVEAU(0): 800x600@72Hz
[ 8026.443] (II) NOUVEAU(0): 800x600@75Hz
[ 8026.443] (II) NOUVEAU(0): 1024x768@60Hz
[ 8026.443] (II) NOUVEAU(0): 1024x768@70Hz
[ 8026.443] (II) NOUVEAU(0): 1024x768@75Hz
[ 8026.443] (II) NOUVEAU(0): 1280x1024@75Hz
[ 8026.443] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 8026.443] (II) NOUVEAU(0): Supported standard timings:
[ 8026.443] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 8026.443] (II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 8026.443] (II) NOUVEAU(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 8026.443] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 8026.443] (II) NOUVEAU(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 8026.443] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 8026.443] (II) NOUVEAU(0): #6: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
[ 8026.443] (II) NOUVEAU(0): Supported detailed timing:
[ 8026.443] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 473 x 296 mm
[ 8026.443] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 8026.443] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 8026.443] (II) NOUVEAU(0): Monitor name: FPD2275W
[ 8026.443] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 195 MHz
[ 8026.443] (II) NOUVEAU(0): Serial No: MGK71D0C00802
[ 8026.443] (II) NOUVEAU(0): EDID (in hex):
[ 8026.443] (II) NOUVEAU(0): 00ffffffffffff001ef9ed0800000000
[ 8026.443] (II) NOUVEAU(0): 0111010368301e782ad515a455499a27
[ 8026.443] (II) NOUVEAU(0): 145054afcf008180714f90409500950f
[ 8026.443] (II) NOUVEAU(0): b300b30f010121399030621a274068b0
[ 8026.443] (II) NOUVEAU(0): 3600d9281100001c000000fc00465044
[ 8026.443] (II) NOUVEAU(0): 32323735570a20202020000000fd0038
[ 8026.443] (II) NOUVEAU(0): 4c1f5313000a202020202020000000ff
[ 8026.443] (II) NOUVEAU(0): 004d474b373144304330303830320061
[ 8026.443] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 8026.443] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 8026.443] (II) NOUVEAU(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8026.443] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8026.477] (II) NOUVEAU(0): EDID for output VGA-1
[ 8026.477] (II) NOUVEAU(0): Manufacturer: GWY Model: 8ed Serial#: 0
[ 8026.477] (II) NOUVEAU(0): Year: 2007 Week: 1
[ 8026.477] (II) NOUVEAU(0): EDID Version: 1.3
[ 8026.477] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 8026.477] (II) NOUVEAU(0): Sync: Separate
[ 8026.477] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48 vert.: 30
[ 8026.477] (II) NOUVEAU(0): Gamma: 2.20
[ 8026.477] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 8026.477] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 8026.477] (II) NOUVEAU(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.603
[ 8026.477] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
[ 8026.477] (II) NOUVEAU(0): Supported established timings:
[ 8026.477] (II) NOUVEAU(0): 720x400@70Hz
[ 8026.477] (II) NOUVEAU(0): 640x480@60Hz
[ 8026.478] (II) NOUVEAU(0): 640x480@72Hz
[ 8026.478] (II) NOUVEAU(0): 640x480@75Hz
[ 8026.478] (II) NOUVEAU(0): 800x600@56Hz
[ 8026.478] (II) NOUVEAU(0): 800x600@60Hz
[ 8026.478] (II) NOUVEAU(0): 800x600@72Hz
[ 8026.478] (II) NOUVEAU(0): 800x600@75Hz
[ 8026.478] (II) NOUVEAU(0): 1024x768@60Hz
[ 8026.478] (II) NOUVEAU(0): 1024x768@70Hz
[ 8026.478] (II) NOUVEAU(0): 1024x768@75Hz
[ 8026.478] (II) NOUVEAU(0): 1280x1024@75Hz
[ 8026.478] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 8026.478] (II) NOUVEAU(0): Supported standard timings:
[ 8026.478] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 8026.478] (II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 8026.478] (II) NOUVEAU(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 8026.478] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 8026.478] (II) NOUVEAU(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 8026.478] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 8026.478] (II) NOUVEAU(0): #6: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
[ 8026.478] (II) NOUVEAU(0): Supported detailed timing:
[ 8026.478] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 473 x 296 mm
[ 8026.478] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 8026.478] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 8026.478] (II) NOUVEAU(0): Monitor name: FPD2275W
[ 8026.478] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 195 MHz
[ 8026.478] (II) NOUVEAU(0): Serial No: MGK71D0C00411
[ 8026.478] (II) NOUVEAU(0): EDID (in hex):
[ 8026.478] (II) NOUVEAU(0): 00ffffffffffff001ef9ed0800000000
[ 8026.478] (II) NOUVEAU(0): 0111010368301e782ad515a455499a27
[ 8026.478] (II) NOUVEAU(0): 145054afcf008180714f90409500950f
[ 8026.478] (II) NOUVEAU(0): b300b30f010121399030621a274068b0
[ 8026.478] (II) NOUVEAU(0): 3600d9281100001c000000fc00465044
[ 8026.478] (II) NOUVEAU(0): 32323735570a20202020000000fd0038
[ 8026.478] (II) NOUVEAU(0): 4c1f5313000a202020202020000000ff
[ 8026.478] (II) NOUVEAU(0): 004d474b373144304330303431310065
[ 8026.478] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 8026.478] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 8026.478] (II) NOUVEAU(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8026.478] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8026.479] (II) NOUVEAU(0): EDID for output HDMI-1
[ 8026.479] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 8026.479] (II) NOUVEAU(0): Output VGA-1 connected
[ 8026.479] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 8026.479] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 8026.479] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1680x1050
[ 8026.479] (II) NOUVEAU(0): Output VGA-1 using initial mode 1680x1050
[ 8026.479] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 8026.479] (--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 0)
[ 8026.479] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 8026.479] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 8026.479] (**) NOUVEAU(0): Driver mode "1680x1050": 187.0 MHz (scaled from 0.0 MHz), 82.3 kHz, 74.9 Hz
[ 8026.479] (II) NOUVEAU(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz e)
[ 8026.479] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 8026.479] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 8026.479] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 8026.479] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8026.480] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 8026.480] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8026.480] (==) NOUVEAU(0): DPI set to (96, 96)
[ 8026.480] (II) Loading sub module "fb"
[ 8026.480] (II) LoadModule: "fb"
[ 8026.480] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8026.484] (II) Module fb: vendor="X.Org Foundation"
[ 8026.484] compiled for 1.17.1, module version = 1.0.0
[ 8026.484] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8026.484] (II) Loading sub module "shadowfb"
[ 8026.484] (II) LoadModule: "shadowfb"
[ 8026.484] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 8026.494] (II) Module shadowfb: vendor="X.Org Foundation"
[ 8026.494] compiled for 1.17.1, module version = 1.0.0
[ 8026.494] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8026.494] (--) Depth 24 pixmap format is 32 bpp
[ 8026.497] (II) NOUVEAU(0): Channel setup complete.
[ 8026.498] (II) NOUVEAU(0): [COPY] async initialised.
[ 8026.509] (II) NOUVEAU(0): [DRI2] Setup complete
[ 8026.509] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 8026.509] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 8026.513] (II) Loading sub module "exa"
[ 8026.513] (II) LoadModule: "exa"
[ 8026.513] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 8026.522] (II) Module exa: vendor="X.Org Foundation"
[ 8026.522] compiled for 1.17.1, module version = 2.6.0
[ 8026.522] ABI class: X.Org Video Driver, version 19.0
[ 8026.522] (II) EXA(0): Driver allocated offscreen pixmaps
[ 8026.522] (II) EXA(0): Driver registered support for the following operations:
[ 8026.522] (II) Solid
[ 8026.522] (II) Copy
[ 8026.522] (II) Composite (RENDER acceleration)
[ 8026.522] (II) UploadToScreen
[ 8026.522] (II) DownloadFromScreen
[ 8026.522] (==) NOUVEAU(0): Backing store enabled
[ 8026.523] (==) NOUVEAU(0): Silken mouse enabled
[ 8026.523] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 8026.523] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 8026.523] (==) NOUVEAU(0): DPMS enabled
[ 8026.523] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 8026.524] (--) RandR disabled
[ 8027.226] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 8027.226] (II) AIGLX: enabled GLX_ARB_create_context
[ 8027.226] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 8027.226] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 8027.226] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 8027.226] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 8027.226] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 8027.226] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 8027.226] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 8027.227] (II) AIGLX: Loaded and initialized nouveau
[ 8027.227] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8027.231] (II) NOUVEAU(0): NVEnterVT is called.
[ 8027.274] (II) NOUVEAU(0): Setting screen physical size to 444 x 277
[ 8027.274] resize called 1680 1050
[ 8027.476] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 8027.476] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 8027.476] (II) LoadModule: "evdev"
[ 8027.476] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 8027.491] (II) Module evdev: vendor="X.Org Foundation"
[ 8027.491] compiled for 1.17.1, module version = 2.9.2
[ 8027.491] Module class: X.Org XInput Driver
[ 8027.491] ABI class: X.Org XInput driver, version 21.0
[ 8027.492] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 12 paused 0
[ 8027.492] (II) Using input driver 'evdev' for 'Power Button'
[ 8027.492] (**) Power Button: always reports core events
[ 8027.492] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 8027.492] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 8027.492] (--) evdev: Power Button: Found keys
[ 8027.492] (II) evdev: Power Button: Configuring as keyboard
[ 8027.492] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 8027.492] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8027.492] (**) Option "xkb_rules" "evdev"
[ 8027.492] (**) Option "xkb_model" "pc104"
[ 8027.492] (**) Option "xkb_layout" "us"
[ 8027.513] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 8027.513] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 8027.514] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 13 paused 0
[ 8027.514] (II) Using input driver 'evdev' for 'Power Button'
[ 8027.514] (**) Power Button: always reports core events
[ 8027.514] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 8027.514] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 8027.514] (--) evdev: Power Button: Found keys
[ 8027.514] (II) evdev: Power Button: Configuring as keyboard
[ 8027.514] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 8027.514] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 8027.514] (**) Option "xkb_rules" "evdev"
[ 8027.514] (**) Option "xkb_model" "pc104"
[ 8027.514] (**) Option "xkb_layout" "us"
[ 8027.515] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 8027.515] (II) No input driver specified, ignoring this device.
[ 8027.515] (II) This device may have been added with another device file.
[ 8027.515] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 8027.515] (II) No input driver specified, ignoring this device.
[ 8027.515] (II) This device may have been added with another device file.
[ 8027.515] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[ 8027.515] (II) No input driver specified, ignoring this device.
[ 8027.515] (II) This device may have been added with another device file.
[ 8027.516] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)
[ 8027.516] (II) No input driver specified, ignoring this device.
[ 8027.516] (II) This device may have been added with another device file.
[ 8027.516] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 8027.516] (II) No input driver specified, ignoring this device.
[ 8027.516] (II) This device may have been added with another device file.
[ 8027.516] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10)
[ 8027.516] (II) No input driver specified, ignoring this device.
[ 8027.516] (II) This device may have been added with another device file.
[ 8027.517] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event11)
[ 8027.517] (II) No input driver specified, ignoring this device.
[ 8027.517] (II) This device may have been added with another device file.
[ 8027.517] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event12)
[ 8027.517] (II) No input driver specified, ignoring this device.
[ 8027.517] (II) This device may have been added with another device file.
[ 8027.517] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event13)
[ 8027.517] (II) No input driver specified, ignoring this device.
[ 8027.517] (II) This device may have been added with another device file.
[ 8027.518] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[ 8027.518] (II) No input driver specified, ignoring this device.
[ 8027.518] (II) This device may have been added with another device file.
[ 8027.518] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[ 8027.518] (II) No input driver specified, ignoring this device.
[ 8027.518] (II) This device may have been added with another device file.
[ 8027.518] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[ 8027.518] (II) No input driver specified, ignoring this device.
[ 8027.518] (II) This device may have been added with another device file.
[ 8027.519] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event9)
[ 8027.519] (II) No input driver specified, ignoring this device.
[ 8027.519] (II) This device may have been added with another device file.
[ 8027.519] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event3)
[ 8027.519] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 8027.572] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 14 paused 0
[ 8027.572] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[ 8027.572] (**) PixArt USB Optical Mouse: always reports core events
[ 8027.572] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event3"
[ 8027.572] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[ 8027.572] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[ 8027.572] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[ 8027.572] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[ 8027.572] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[ 8027.572] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[ 8027.572] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[ 8027.572] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 8027.572] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 8027.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.3/8-1.3:1.0/0003:093A:2510.0001/input/input3/event3"
[ 8027.572] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 8)
[ 8027.572] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[ 8027.573] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 8027.573] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[ 8027.573] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 8027.573] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 8027.573] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[ 8027.573] (II) No input driver specified, ignoring this device.
[ 8027.573] (II) This device may have been added with another device file.
[ 8027.573] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 8027.573] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 8027.574] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 15 paused 0
[ 8027.574] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 8027.574] (**) AT Translated Set 2 keyboard: always reports core events
[ 8027.574] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 8027.574] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 8027.574] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 8027.574] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 8027.574] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 8027.574] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 8027.574] (**) Option "xkb_rules" "evdev"
[ 8027.574] (**) Option "xkb_model" "pc104"
[ 8027.574] (**) Option "xkb_layout" "us"
[ 8027.575] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 8027.575] (II) No input driver specified, ignoring this device.
[ 8027.575] (II) This device may have been added with another device file.
[ 8066.226] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 8066.226] (II) NOUVEAU(0): NVLeaveVT is called.
[ 8066.272] (II) systemd-logind: got pause for 13:65
[ 8066.272] (II) systemd-logind: got pause for 226:0
[ 8066.272] (II) systemd-logind: got pause for 13:64
[ 8066.272] (II) systemd-logind: got pause for 13:66
[ 8066.272] (II) systemd-logind: got pause for 13:67
[ 8078.109] (II) systemd-logind: got resume for 13:65
[ 8078.109] (II) systemd-logind: got resume for 226:0
[ 8078.109] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 8078.109] (II) NOUVEAU(0): NVEnterVT is called.
[ 8078.214] (II) NOUVEAU(0): EDID vendor "GWY", prod id 2285
[ 8078.214] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 8078.214] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 8078.214] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 8078.214] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 8078.214] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8078.214] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8078.214] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8078.214] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 8078.214] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 8078.215] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz e)
[ 8078.216] (II) systemd-logind: got resume for 13:64
[ 8078.216] (II) systemd-logind: got resume for 13:66
[ 8078.216] (II) systemd-logind: got resume for 13:67
[ 8080.476] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 8080.476] (II) NOUVEAU(0): NVLeaveVT is called.
[ 8080.516] (II) systemd-logind: got pause for 13:65
[ 8080.516] (II) systemd-logind: got pause for 226:0
[ 8080.516] (II) systemd-logind: got pause for 13:64
[ 8080.516] (II) systemd-logind: got pause for 13:66
[ 8080.516] (II) systemd-logind: got pause for 13:67
[ 8084.339] (II) evdev: AT Translated Set 2 keyboard: Close
[ 8084.339] (II) UnloadModule: "evdev"
[ 8084.339] (II) systemd-logind: releasing fd for 13:66
[ 8084.402] (II) evdev: PixArt USB Optical Mouse: Close
[ 8084.402] (II) UnloadModule: "evdev"
[ 8084.402] (II) systemd-logind: releasing fd for 13:67
[ 8084.445] (II) evdev: Power Button: Close
[ 8084.446] (II) UnloadModule: "evdev"
[ 8084.446] (II) systemd-logind: releasing fd for 13:64
[ 8084.465] (II) evdev: Power Button: Close
[ 8084.466] (II) UnloadModule: "evdev"
[ 8084.466] (II) systemd-logind: releasing fd for 13:65
[ 8084.564] (II) Server terminated successfully (0). Closing log file.I have tried many permutations of the xorg.conf file. Here is the most complete:
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "VGA-1"
VendorName "Gateway"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Option "Primary" "true"
EndSection
Section "Monitor"
Identifier "DVI-I-1"
VendorName "Gateway"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Option "RightOf" "VGA-1"
EndSection
Section "Device"
Identifier "Card0"
Driver "nouveau"
Screen 0
BusID "PCI:1:0:0"
Option "UseDisplayDevice" "VGA-1"
EndSection
Section "Device"
Identifier "Card1"
Driver "nouveau"
Screen 1
BusID "PCI:1:0:0"
Option "UseDisplayDevice" "DVI-I-1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "VGA-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Modes "1680x1050"
Depth 24
Virtual 1680 1050
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "DVI-I-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSectiondmesg | grep nouveau
[ 0.800369] fb: switching to nouveaufb from VESA VGA
[ 0.800707] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c1080a1
[ 0.800709] nouveau [ DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
[ 0.800711] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
[ 0.927500] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 0.927606] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 0.927608] nouveau [ VBIOS][0000:01:00.0] version 70.08.ad.00.01
[ 0.927986] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 0.928012] nouveau W[ PFB][0000:01:00.0][0x00000000] reclocking of this ram type unsupported
[ 0.928014] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 0.928016] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 0.928017] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 0.929440] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 1.993360] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 1.993380] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 1.993417] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 2.013485] nouveau [ CLK][0000:01:00.0] 03: core 50 MHz memory 135 MHz
[ 2.013488] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz memory 324 MHz
[ 2.013491] nouveau [ CLK][0000:01:00.0] 0f: core 700 MHz memory 600 MHz
[ 2.013629] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 324 MHz
[ 2.015872] nouveau [ DRM] VRAM: 1024 MiB
[ 2.015874] nouveau [ DRM] GART: 1048576 MiB
[ 2.015877] nouveau [ DRM] TMDS table version 2.0
[ 2.015878] nouveau [ DRM] DCB version 4.0
[ 2.015880] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 2.015882] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 2.015884] nouveau [ DRM] DCB outp 02: 04011310 00020020
[ 2.015885] nouveau [ DRM] DCB outp 03: 02022362 00020010
[ 2.015887] nouveau [ DRM] DCB conn 00: 00001030
[ 2.015889] nouveau [ DRM] DCB conn 01: 00000100
[ 2.015890] nouveau [ DRM] DCB conn 02: 00002261
[ 2.020168] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 2.135190] nouveau [ DRM] allocated 1680x1050 fb: 0x60000, bo c1c31c00
[ 2.135248] fbcon: nouveaufb (fb0) is primary device
[ 2.220997] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 2.220999] nouveau 0000:01:00.0: registered panic notifierls
[ 2.250013] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 620] (rev a1)modinfo nouveau
filename: /lib/modules/4.0.4-2-ARCH/kernel/drivers/gpu/drm/nouveau/nouveau.ko.gz
license: GPL and additional rights
description: nVidia Riva/TNT/GeForce/Quadro/Tesla
author: Nouveau Project
alias: pci:v000012D2d*sv*sd*bc03sc*i*
alias: pci:v000010DEd*sv*sd*bc03sc*i*
depends: drm,drm_kms_helper,ttm,mxm-wmi,i2c-core,button,wmi,video,i2c-algo-bit
intree: Y
vermagic: 4.0.4-2-ARCH SMP preempt mod_unload modversions 686
parm: tv_norm:Default TV norm.
Supported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,
hd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.
Default: PAL
*NOTE* Ignored for cards with external TV encoders. (charp)
parm: vram_pushbuf:Create DMA push buffers in VRAM (int)
parm: nofbaccel:Disable fbcon acceleration (int)
parm: tv_disable:Disable TV-out detection (int)
parm: ignorelid:Ignore ACPI lid status (int)
parm: duallink:Allow dual-link TMDS (default: enabled) (int)
parm: pstate:enable sysfs pstate file, which will be moved in the future (int)
parm: config:option string to pass to driver core (charp)
parm: debug:debug string to pass to driver core (charp)
parm: noaccel:disable kernel/abi16 acceleration (int)
parm: modeset:enable driver (default: auto, 0 = disabled, 1 = enabled, 2 = headless) (int)
parm: runpm:disable (0), force enable (1), optimus only default (-1) (int)
parm: agpmode:AGP mode (0 to disable AGP) (int)systemctl
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:01.0-0000:01:00.1-sound-card1.device loaded active plugged GF108 High Definition Audio Controller
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 82801I (ICH9 Family) HD Audio Controller
sys-devices-pci0000:00-0000:00:1c.2-0000:03:00.0-net-enp3s0.device loaded active plugged 88E8056 PCI-E Gigabit Ethernet Controller (Motherboard)
sys-devices-pci0000:00-0000:00:1c.4-0000:02:00.0-ata1-host0-target0:0:0-0:0:0:0-block-sr0.device loaded active plugged 52X32X52_CD-RW_1.04_20031128
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda-sda1.device loaded active plugged ST500DM002-1BD142 System_Reserved
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda-sda2.device loaded active plugged ST500DM002-1BD142 2
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda-sda3.device loaded active plugged LVM PV NSFqfm-BP4a-otqQ-5qQ4-7Rfk-hD0Y-3bXxd4 on /dev/sda3 3
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda.device loaded active plugged ST500DM002-1BD142
sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-virtual-block-dm\x2d0.device loaded active plugged /sys/devices/virtual/block/dm-0
sys-devices-virtual-block-dm\x2d1.device loaded active plugged /sys/devices/virtual/block/dm-1
sys-devices-virtual-block-dm\x2d2.device loaded active plugged /sys/devices/virtual/block/dm-2
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-subsystem-net-devices-enp3s0.device loaded active plugged 88E8056 PCI-E Gigabit Ethernet Controller (Motherboard)
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
run-user-1000.mount loaded active mounted /run/user/1000
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
usr-local-media.mount loaded active mounted /usr/local/media
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
session-c1.scope loaded active running Session c1 of user lbrown
dbus.service loaded active running D-Bus System Message Bus
getty@tty1.service loaded active running Getty on tty1
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
lvm2-lvmetad.service loaded active running LVM2 metadata daemon
lvm2-pvscan@8:3.service loaded active exited LVM2 PV scan on device 8:3
netctl.service loaded active exited (Re)store the netctl profile state
netctl@ethernet\x2dstatic.service loaded active exited A basic static ethernet connection
systemd-fsck@dev-disk-by\x2duuid-15e4cf5f\x2d0b96\x2d45e4\x2db8e9\x2d69588e038968.service loaded active exited File System Check on /dev/disk/by-uuid/15e4cf5f-0b96-45e4-b8e9-69588e038968
systemd-fsck@dev-disk-by\x2duuid-98a61312\x2d6131\x2d415e\x2da6cc\x2dd13c3110b679.service loaded active exited File System Check on /dev/disk/by-uuid/98a61312-6131-415e-a6cc-d13c3110b679
systemd-journal-flush.service loaded active exited Flush Journal to Persistent Storage
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
● systemd-modules-load.service loaded failed failed Load Kernel Modules
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Boot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
user@1000.service loaded active running User Manager for UID 1000
-.slice loaded active active Root Slice
system-getty.slice loaded active active system-getty.slice
system-lvm2\x2dpvscan.slice loaded active active system-lvm2\x2dpvscan.slice
system-netctl.slice loaded active active system-netctl.slice
system-systemd\x2dfsck.slice loaded active active system-systemd\x2dfsck.slice
system.slice loaded active active System Slice
user-1000.slice loaded active active user-1000.slice
user.slice loaded active active User and Session Slice
dbus.socket loaded active running D-Bus System Message Bus Socket
dm-event.socket loaded active listening Device-mapper event daemon FIFOs
lvm2-lvmetad.socket loaded active running LVM2 metadata daemon socket
sshd.socket loaded active listening sshd.socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald-dev-log.socket loaded active running Journal Socket (/dev/log)
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active running udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
paths.target loaded active active Paths
remote-fs.target loaded active active Remote File Systems
slices.target loaded active active Slices
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
logrotate.timer loaded active waiting Daily rotation of log files
man-db.timer loaded active waiting Daily man-db cache update
shadow.timer loaded active waiting Daily verification of password and group files
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
updatedb.timer loaded active waiting Daily locate database update
93 loaded units listed. Pass --all to see loaded but inactive units, too.systemctl status
● arch
State: degraded
Jobs: 0 queued
Failed: 1 units
Since: Thu 2015-06-11 10:46:18 PDT; 4min 13s ago
CGroup: /
├─1 /sbin/init
├─system.slice
│ ├─dbus.service
│ │ └─258 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
│ ├─lvm2-lvmetad.service
│ │ └─242 /usr/bin/lvmetad -f
│ ├─systemd-journald.service
│ │ └─150 /usr/lib/systemd/systemd-journald
│ ├─systemd-logind.service
│ │ └─257 /usr/lib/systemd/systemd-logind
│ └─systemd-udevd.service
│ └─185 /usr/lib/systemd/systemd-udevd
└─user.slice
└─user-1000.slice
├─user@1000.service
│ ├─340 /usr/lib/systemd/systemd --user
│ └─342 (sd-pam)
└─session-c1.scope
├─264 login -- lbrown
├─344 -zsh
└─921 systemctl statusOffline
#2 2015-06-12 11:59:11
- WorMzy
- Administrator
- From: Scotland
- Registered: 2010-06-16
- Posts: 13,572
- Website
Re: nvidia GeForce GT620 using nouveau driver produces black screen
Not an Installation issue, moving to Kernel and Hardware.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
#3 2015-06-13 01:39:24
- grandtheftjiujitsu
- Member
- Registered: 2013-07-27
- Posts: 91
Re: nvidia GeForce GT620 using nouveau driver produces black screen
If your system was working before an upgrade and not after it'd be a good idea to check pacman's log and try downgrading the packages one or a couple at a time and see if one is responsible for the breakage.
Offline
#4 2015-06-13 06:29:19
- mauritiusdadd
- Member
- From: Benevento, Italy
- Registered: 2013-10-27
- Posts: 776
Re: nvidia GeForce GT620 using nouveau driver produces black screen
lbrown wrote:
systemctl
● systemd-modules-load.service loaded failed failed Load Kernel Modules
Well, that unit has failed. Anything interesting in the journal?
Offline