Hplip printer issues. . . .

rich52 · 2015-06-22 03:19:23

I've attempted to get my hp p1006 laserjet printer to work but I cannot connect up using 'cups' and I also cannot enter a 'root' password that will allow me to download the proprietary printer driver for this printer. I've had the same issues with Manjaro also. It's seems like it's a new problem with the latest 'sourceforge.net' hplip file. Anyone know what's going on here?. . . this is the only obstacle I've been having thus far with Arch and Manjaro.

Any help or advice would be kindly appreciated.

Richard:)

grandtheftjiujitsu · 2015-06-22 04:12:07

1) I've had better luck with the CUPS provided PPDs rather than those in the local hplip library.
2) Many a time I've gotten frustrated because I forgot to start / enable the cups daemon with systemd.
3) Don't forget to add your user to the print admin group. You shouldn't need to login as root (I assume you mean from the CUPS browser interface) to print things.

ewaller · 2015-06-22 04:33:56

Is that one of those Windows only USB printers that HP extruded for a while? I have an HP1020 that requires that firmware be uploaded at power up from the host. I can host the printer from a Windows system and share it via SMB, but cannot upload the firmware from a real operating system.

You might want to try the drivers from the AUR: aur/foo2zjs

R00KIE · 2015-06-22 08:42:07

According to this [1] it should be supported on Linux, however they mention some downloadable plugin is required and that hp-setup should be able to download it and setup everything.

@ewaller
According to this [2] your printer should also be supported but it also mentions that some downloadable plugin is required, if you didn't manage to make it work maybe rich52 is also in for a bad surprise.

I don't know about laserjets and downloadable plugins/firmware blobs but my hp 1050 [3] works well under linux and it was very easy to setup, maybe I got lucky and managed to pick a "good" all-in-one.
[1] http://www.hplipopensource.com/hplip-we … p1006.html
[2] http://www.hplipopensource.com/hplip-we … _1020.html
[3] http://www.hplipopensource.com/hplip-we … eries.html

rich52 · 2015-06-22 14:04:07

Running through the hp-setup and clicking on the ppd file link all work but the driver won't install like it use to at all. . . (i.e. use to ask for root permissions and that doesn't seem to work anymore). That's where the program hangs up with my printer. Earlier version of hplip the driver installed and worked but now it doesn't want to install. The cups interface won't allow me to log into the browser that allows me to connect up using 'cups' as it also use to. Looks like I'm stuck here for a while until someone smarter than me and knows how to program get fix what ever bugs need to be ironed out.

Rich:)

R00KIE · 2015-06-22 16:40:39

You could try to install hplip-plugin (it is one of the optdepends of hplip) and see if things move further along.

You could also try to run hp-setup directly as root I suppose.

rich52 · 2015-06-22 19:06:54

I've installed the hplip-plugin which matches the hplip (version-wise). When I run hp-setup from root in terminal and start to go through the steps I end up with a message from KDE saying that klauncher couldn't connect up with dbus-server. I still can't do anything with cups and it's connection to the internet.

Rich:)

Last edited by rich52 (2015-06-22 19:07:30)

sesese9 · 2015-06-22 20:39:31

I actually just installed cups and hplip for my HP Officejet Pro 8600 and it worked for me
1) make sure you do systemctl start (cups service name)
2) then enable service
3) I actually used the ppds from the hplip for my printer
This method worked for me and I hope it works for you

Last edited by sesese9 (2015-06-22 20:39:59)

rich52 · 2015-06-22 22:10:58

Here is what I get when running hp-setup from terminal:

[root@evo richard]# hp-setup

HP Linux Imaging and Printing System (ver. 3.15.6)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Qt at-spi: error getting the accessibility dbus address: "Not connected to D-Bus server"
Connected to accessibility bus at: "unix:abstract=/tmp/dbus-CQ0svyR3B9,guid=8f8968c8d504e0aa3870b20d55888153"
Registered DEC: true
Registered event listener change listener: true
hp-setup(4142) Bridge::setRootObject: KAccessibleBridge: Failed to connect to session bus
Searching... (bus=usb, search=(None), desc=0)
error: No PPD found for model laserjet_p1006 using old algorithm.
error: No appropriate print PPD file found for model hp_laserjet_p1006
klauncher(4181) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
klauncher(4185) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
klauncher(4188) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
startkdeinitlock(4142): couldn't create slave: "Cannot talk to klauncher: Not connected to D-Bus server"
klauncher(4191) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
klauncher(4194) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
startkdeinitlock(4142): couldn't create slave: "Cannot talk to klauncher: Not connected to D-Bus server"
FIXME: handle dialog start.
klauncher(4197) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
klauncher(4200) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
startkdeinitlock(4142): couldn't create slave: "Cannot talk to klauncher: Not connected to D-Bus server"
klauncher(4203) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
startkdeinitlock(4142): Couldn't start knotify from knotify4.desktop: "KLauncher could not be reached via D-Bus. Error when calling start_service_by_desktop_path:
Not connected to D-Bus server
"

FIXME: handle dialog start.
FIXME: handle dialog end.
FIXME: handle dialog end.
FIXME: handle dialog end.

Done.

Richard

rich52 · 2015-06-22 22:31:27

When I run systemctl I get:

UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active running Arbitrary Executable File Formats File System
sys-devices-pci0000:00-0000:00:02.0-0000:04:00.1-sound-card1.device loaded active plugged /sys/devices/pci0000:00/0
sys-devices-pci0000:00-0000:00:06.0-0000:03:00.0-net-enp3s0.device loaded active plugged RTL8111/8168/8411 PCI Expr
sys-devices-pci0000:00-0000:00:11.0-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged LVM
sys-devices-pci0000:00-0000:00:11.0-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged LVM
sys-devices-pci0000:00-0000:00:11.0-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged ST3100052
sys-devices-pci0000:00-0000:00:11.0-ata2-host1-target1:0:0-1:0:0:0-block-sdb-sdb1.device loaded active plugged ST31
sys-devices-pci0000:00-0000:00:11.0-ata2-host1-target1:0:0-1:0:0:0-block-sdb.device loaded active plugged ST3100052
sys-devices-pci0000:00-0000:00:11.0-ata3-host2-target2:0:0-2:0:0:0-block-sr0.device loaded active plugged ATAPI_iHA
sys-devices-pci0000:00-0000:00:11.0-ata4-host3-target3:0:0-3:0:0:0-block-sr1.device loaded active plugged HL-DT-ST_
sys-devices-pci0000:00-0000:00:12.1-usb4-4\x2d3-4\x2d3:1.0-sound-card3.device loaded active plugged H600 [Wireless
sys-devices-pci0000:00-0000:00:12.2-usb1-1\x2d1.device loaded active plugged LaserJet P1006
sys-devices-pci0000:00-0000:00:12.2-usb1-1\x2d3-1\x2d3:1.2-sound-card2.device loaded active plugged HD Pro Webcam C
sys-devices-pci0000:00-0000:00:13.2-usb2-2\x2d5-2\x2d5:1.0-host6-target6:0:0-6:0:0:0-block-sdc.device loaded active p
sys-devices-pci0000:00-0000:00:13.2-usb2-2\x2d5-2\x2d5:1.0-host6-target6:0:0-6:0:0:1-block-sdd.device loaded active p
sys-devices-pci0000:00-0000:00:13.2-usb2-2\x2d5-2\x2d5:1.0-host6-target6:0:0-6:0:0:2-block-sde.device loaded active p
sys-devices-pci0000:00-0000:00:13.2-usb2-2\x2d5-2\x2d5:1.0-host6-target6:0:0-6:0:0:3-block-sdf.device loaded active p
sys-devices-pci0000:00-0000:00:14.2-sound-card0.device loaded active plugged SBx00 Azalia (Intel HDA)
sys-devices-pci0000:00-0000:00:14.4-0000:01:06.0-ieee80211-phy0-rfkill0.device loaded active plugged /sys/devices/p
sys-devices-pci0000:00-0000:00:14.4-0000:01:06.0-net-wlp1s6.device loaded active plugged AR5212/AR5213 Wireless Net
sys-devices-platform-floppy.0-block-fd0.device loaded active plugged /sys/devices/platform/floppy.0/block/fd0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-pnp0-00:03-tty-ttyS0.device loaded active plugged /sys/devices/pnp0/00:03/tty/ttyS0
sys-devices-virtual-block-dm\x2d0.device loaded active plugged /sys/devices/virtual/block/dm-0
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-net-devices-enp3s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet
sys-subsystem-net-devices-wlp1s6.device loaded active plugged AR5212/AR5213 Wireless Network Adapter
sys-subsystem-rfkill-devices-rfkill0.device loaded active plugged /sys/subsystem/rfkill/devices/rfkill0
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
proc-sys-fs-binfmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
run-user-1000.mount loaded active mounted /run/user/1000
run-user-120-gvfs.mount loaded active mounted /run/user/120/gvfs
run-user-120.mount loaded active mounted /run/user/120
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Director
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Wa
session-c3.scope loaded active running Session c3 of user gdm
session-c4.scope loaded active running Session c4 of user richard
accounts-daemon.service loaded active running Accounts Service
avahi-daemon.service loaded active running Avahi mDNS/DNS-SD Stack
colord.service loaded active running Manage, Install and Generate Color Profiles
dbus.service loaded active running D-Bus System Message Bus
gdm.service loaded active running GNOME Display Manager
kmod-static-nodes.service loaded active exited Create list of required static device nodes fo
lvm2-lvmetad.service loaded active running LVM2 metadata daemon
lvm2-pvscan@8:1.service loaded active exited LVM2 PV scan on device 8:1
lvm2-pvscan@8:2.service loaded active exited LVM2 PV scan on device 8:2
NetworkManager.service loaded active running Network Manager
polkit.service loaded active running Authorization Manager
rtkit-daemon.service loaded active running RealtimeKit Scheduling Policy Service
systemd-binfmt.service loaded active exited Set Up Additional Binary Formats
systemd-journal-flush.service loaded active exited Flush Journal to Persistent Storage
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-rfkill@rfkill0.service loaded active exited Load/Save RF Kill Switch Status of rfkill0
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Boot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
user@1000.service loaded active running User Manager for UID 1000
user@120.service loaded active running User Manager for UID 120
wpa_supplicant.service loaded active running WPA supplicant
-.slice loaded active active Root Slice
system-getty.slice loaded active active system-getty.slice
system-lvm2\x2dpvscan.slice loaded active active system-lvm2\x2dpvscan.slice
system-systemd\x2drfkill.slice loaded active active system-systemd\x2drfkill.slice
system.slice loaded active active System Slice
user-1000.slice loaded active active user-1000.slice
user-120.slice loaded active active user-120.slice
user.slice loaded active active User and Session Slice
avahi-daemon.socket loaded active running Avahi mDNS/DNS-SD Stack Activation Socket
dbus.socket loaded active running D-Bus System Message Bus Socket
dm-event.socket loaded active listening Device-mapper event daemon FIFOs
lvm2-lvmetad.socket loaded active running LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald-dev-log.socket loaded active running Journal Socket (/dev/log)
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active running udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
nss-user-lookup.target loaded active active User and Group Name Lookups
paths.target loaded active active Paths
printer.target loaded active active Printer
remote-fs.target loaded active active Remote File Systems
slices.target loaded active active Slices
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
logrotate.timer loaded active waiting Daily rotation of log files
man-db.timer loaded active waiting Daily man-db cache update
shadow.timer loaded active waiting Daily verification of password and group files
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
updatedb.timer loaded active waiting Daily locate database update

LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.

121 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
lines 81-129/129 (END)

Richard

R00KIE · 2015-06-22 23:15:59

I'm not sure why something that should run on the command line is trying to call kde stuff, on the other hand, now that you have installed the plugin (from the repos I hope) you could give it a try to setup the printer directly from cups.

rich52 wrote:

I still can't do anything with cups and it's connection to the internet.

I'm not sure what you mean by this, cups doesn't require connectivity to the internet, you should be able to access it on localhost:631.

rich52 · 2015-06-23 00:29:27

http://localhost:631/admin err_connection_refused 'THIS WEBPAGE IS NOT AVAILABLE'. Google Chrome's connection attempt to localhost was rejected. The website may be down, or your network may not be properly configured.

Where does this leave me now?

Rich:(

rich52 · 2015-06-23 00:33:56

| SYSTEM INFO |
---------------

Kernel: 4.0.5-1-ARCH #1 SMP PREEMPT Sat Jun 6 18:37:49 CEST 2015 GNU/Linux
Host: evo
Proc: 4.0.5-1-ARCH #1 SMP PREEMPT Sat Jun 6 18:37:49 CEST 2015 GNU/Linux
Distribution: unknown
Bitness: 64 bit

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.15.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.15.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.15.6
html=/usr/share/doc/hplip-3.15.6
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.15.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.15.6

Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 06/22/15 18:30:32
version = 3.15.6

<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>

--------------------------
| External Dependencies |
--------------------------

xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.112 OK -
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 2.1 MISSING 'CUPS may not be installed or not running'
dbus DBus - Message bus system REQUIRED - 1.8.18 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.16 OK -
network network -wget OPTIONAL - 1.16.3 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.24 OK -

-------------------------
| General Dependencies |
-------------------------

python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.4 OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.2 OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.1 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.1 OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.1.44 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.4.3 OK -
sane SANE - Scanning library REQUIRED - 1.0.24 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.21' OK -
sane-devel SANE - Scanning library development files REQUIRED - 1.0.24 OK -
python3-xml Python XML libraries REQUIRED - 2.1.0 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
python3-devel Python devel - Python development files REQUIRED 2.2 3.4.3 OK -
python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 4.11.4 OK -

---------------
| COMPILEDEP |
---------------

make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 5.1.0 OK -
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -

----------------------
| Python Extentions |
----------------------

cupsext CUPS-Extension REQUIRED - 3.15.6 OK -
hpmudext IO-Extension REQUIRED - 3.15.6 OK -

-----------------------
| Scan Configuration |
-----------------------

hpaio HPLIP-SANE-Backend REQUIRED - 3.15.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.15.6 OK -

-----------------------
| Other Dependencies |
-----------------------

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `v4l:/dev/video0' is a Noname HD Pro Webcam C920 virtual device
device `hp:libusb:003:002' is a Hewlett-Packard ScanJet 63x0C flatbed scanner

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

Device URI Model
------------------------------------------------------ ------------------------------------------------------
hp:/usb/HP_LaserJet_P1006?serial=AC2HTTW HP LaserJet P1006

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

lpstat
------
Type: Unknown
Device URI: Bad file descriptor

--------------
| PERMISSION |
--------------

USB None Required - - OK Node:'/dev/bus/usb/001/002' Perm:' root lp rw- rw- rw- rw- r--'

Checking Permissions....
Permissions are correct.

Checking for Configured Queues....
No Queue added

warning: No Queue(s) configured.

Checking for HP Properitery Plugin's....
No plug-in printers are configured.

Diagnose completed...

More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html

Please close this terminal manually.

Rich

rich52 · 2015-06-23 00:37:11

error: cups CUPS - Common Unix Printing System REQUIRED 1.1 2.1 MISSING 'CUPS may not be installed or not running'

I've got the latest CUPS installed on my system. . . . this says it isn't??

Rich

NoSavvy · 2015-06-23 07:08:25

#rich52

Have you actually run " sudo systemctl start org.cups.cupsd" and "sudo systemctl enable org.cups.cupsd" as in your post 11 it doesn't appear to be running.
"systemctl -t service" will list loaded services.

Last edited by NoSavvy (2015-06-23 07:09:18)

R00KIE · 2015-06-23 07:09:54

"or not running" might the key, check on the wiki [1] how to configure cups. Also, please edit your previous posts and put the large sections of text inside code tags[2].

[1] https://wiki.archlinux.org/index.php/CUPS#Configuring
[2] https://wiki.archlinux.org/index.php/Fo … s_and_code

pypi · 2015-06-23 07:14:55

It appears that cupsd is not running.
Which is probably obvious.

I couldn't see any mention the cupsd service in the output of systemctl.
Are you _sure_ that it is enabled and running?

Perhaps you could post the output of:

 systemctl status org.cups.cupsd.service

I may not have read the posts well enough, though...

EDIT: It appears I was a bit slow...

Last edited by pypi (2015-06-23 07:15:19)

creatid · 2015-06-23 19:45:21

To get rid of the KDE stuff when installing, I would advise to use

hp-setup -i

This way it does not load any graphic dependecies and stays CLI only to rule out any issues there.

Arch Linux

#1 2015-06-22 03:19:23

Hplip printer issues. . . .

#2 2015-06-22 04:12:07

Re: Hplip printer issues. . . .

#3 2015-06-22 04:33:56

Re: Hplip printer issues. . . .

#4 2015-06-22 08:42:07

Re: Hplip printer issues. . . .

#5 2015-06-22 14:04:07

Re: Hplip printer issues. . . .

#6 2015-06-22 16:40:39

Re: Hplip printer issues. . . .

#7 2015-06-22 19:06:54

Re: Hplip printer issues. . . .

#8 2015-06-22 20:39:31

Re: Hplip printer issues. . . .

#9 2015-06-22 22:10:58

Re: Hplip printer issues. . . .

#10 2015-06-22 22:31:27

Re: Hplip printer issues. . . .

#11 2015-06-22 23:15:59

Re: Hplip printer issues. . . .

#12 2015-06-23 00:29:27

Re: Hplip printer issues. . . .

#13 2015-06-23 00:33:56

Re: Hplip printer issues. . . .

#14 2015-06-23 00:37:11

Re: Hplip printer issues. . . .

#15 2015-06-23 07:08:25

Re: Hplip printer issues. . . .

#16 2015-06-23 07:09:54

Re: Hplip printer issues. . . .

#17 2015-06-23 07:14:55

Re: Hplip printer issues. . . .

#18 2015-06-23 19:45:21

Re: Hplip printer issues. . . .

Board footer