e353 modem 3g works only at boot

enricotognoni · 2015-06-28 11:07:54

hi, if i boot usb modem is ON with correct switch:

ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard

is ok
If i unplug then plug Huawei E353 the new result is:

ID 12d1:1446 Huawei Technologies Co., Ltd. Modem/Networkcard

This is NOT ok

This is dmesg when it works

.0-1.2.4, WWAN/QMI device, c6:35:e7:6e:ae:fa
[   18.621550] usbcore: registered new interface driver qmi_wwan
[   18.652466] usbcore: registered new interface driver usbserial
[   18.652492] usbcore: registered new interface driver usbserial_generic
[   18.652522] usbserial: USB Serial support registered for generic
[   18.657765] usbcore: registered new interface driver option
[   18.657800] usbserial: USB Serial support registered for GSM modem (1-port)
[   18.658068] option 1-1.2.4:1.0: GSM modem (1-port) converter detected
[   18.658395] usb 1-1.2.4: GSM modem (1-port) converter now attached to ttyUSB0
[   18.658489] option 1-1.2.4:1.3: GSM modem (1-port) converter detected
[   18.658636] usb 1-1.2.4: GSM modem (1-port) converter now attached to ttyUSB1
[   18.658669] option 1-1.2.4:1.4: GSM modem (1-port) converter detected
[   18.658812] usb 1-1.2.4: GSM modem (1-port) converter now attached to ttyUSB2
[   19.477340] scsi 8:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2

if i unplug the modem, and then plug doesnt work.

[  653.451424] option 1-1.2.4:1.3: device disconnected
[  653.451630] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  653.451659] option 1-1.2.4:1.4: device disconnected
[  657.170259] usb 1-1.2: new full-speed USB device number 8 using ehci-pci
[  657.257906] hub 1-1.2:1.0: USB hub found
[  657.258613] hub 1-1.2:1.0: 4 ports detected
[  657.533546] usb 1-1.2.2: new full-speed USB device number 9 using ehci-pci
[  657.625559] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C52F.0005/input/input21
[  657.625968] hid-generic 0003:046D:C52F.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2.2/input0
[  657.629597] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.1/0003:046D:C52F.0006/input/input22
[  657.681171] hid-generic 0003:046D:C52F.0006: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2.2/input1
[  660.350276] usb 1-1.2.4: new full-speed USB device number 10 using ehci-pci
[  660.437198] usb 1-1.2.4: not running at top speed; connect to a high speed hub
[  660.543591] usb-storage 1-1.2.4:1.0: USB Mass Storage device detected
[  660.543928] scsi host10: usb-storage 1-1.2.4:1.0
[  660.544543] usb-storage 1-1.2.4:1.1: USB Mass Storage device detected
[  660.544832] scsi host11: usb-storage 1-1.2.4:1.1
[  661.547470] scsi 10:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[  661.549976] scsi 11:0:0:0: Direct-Access     HUAWEI   TF CARD Storage       PQ: 0 ANSI: 2
[  661.551222] sr 10:0:0:0: [sr0] scsi-1 drive
[  661.551520] sr 10:0:0:0: Attached scsi CD-ROM sr0
[  661.556341] sd 11:0:0:0: [sdb] Attached SCSI removable disk

system:
Linux enrico 4.0.6-1-ck #1 SMP PREEMPT Mon Jun 22 23:23:41 EDT 2015 x86_64 GNU/Linux

packages installed

yaourt -Ss modem | grep install
extra/libmm-glib 1.4.8-2 [installed]
[enrico@enrico ~]$ yaourt -Ss modeswitch | grep install
community/usb_modeswitch 2.2.1-1 [installed]
[enrico@enrico ~]$ yaourt -Ss usb | grep install
core/libusb 1.0.19-1 [installed]
core/usbutils 008-1 (base) [installed]
extra/libgusb 0.2.4-1 [installed]
extra/libusbmuxd 1.0.10-1 [installed]
community/unetbootin 608-2 [installed]
community/usb_modeswitch 2.2.1-1 [installed]
    Simple tool to create a usb stick installer for Windows (Vista and above)
[enrico@enrico ~]$

I cant rmmod usb_storage not even with sudo or as root it says that something is active,
this are my rule (i dont have virtual-box installed)

cd /lib/udev/rules.d
[enrico@enrico rules.d]$ ls
10-dm.rules                            70-infrared.rules
11-dm-lvm.rules                        70-mouse.rules
13-dm-disk.rules                       70-power-switch.rules
40-hpet-permissions.rules              70-touchpad.rules
40-usb_modeswitch.rules                70-uaccess.rules
50-udev-default.rules                  71-seat.rules
56-hpmud.rules                         73-seat-late.rules
60-block.rules                         75-net-description.rules
60-cdrom_id.rules                      75-probe_mtd.rules
60-drm.rules                           78-sound-card.rules
60-evdev.rules                         80-drivers.rules
60-pcmcia.rules                        80-libinput-device-groups.rules
60-persistent-alsa.rules               80-net-setup-link.rules
60-persistent-input.rules              80-udisks.rules
60-persistent-storage-tape.rules       80-udisks2.rules
60-persistent-storage.rules            90-alsa-restore.rules
60-persistent-v4l.rules                90-libinput-model-quirks.rules
60-serial.rules                        90-pulseaudio.rules
61-accelerometer.rules                 90-vconsole.rules
61-gnome-bluetooth-rfkill.rules        95-cd-devices.rules
61-gnome-settings-daemon-rfkill.rules  95-dm-notify.rules
63-md-raid-arrays.rules                95-upower-csr.rules
64-btrfs.rules                         95-upower-hid.rules
64-md-raid-assembly.rules              95-upower-wup.rules
69-cd-sensors.rules                    99-bumblebee-nvidia-dev.rules
69-dm-lvm-metad.rules                  99-systemd.rules

I know that something could happen with some installation but i dont have virtualbox installed

I apologize if this is not correct forum or bad thread repetition, thanks for help, ciao!

Last edited by enricotognoni (2015-06-28 11:09:48)

mauritiusdadd · 2015-06-28 13:25:35

Probably related to this: https://bbs.archlinux.org/viewtopic.php?pid=1540350

Last edited by mauritiusdadd (2015-06-28 13:25:52)

Arch Linux

#1 2015-06-28 11:07:54

e353 modem 3g works only at boot

#2 2015-06-28 13:25:35

Re: e353 modem 3g works only at boot

Board footer