You are not logged in.

#1 2015-07-18 01:17:57

betseg
Member
From: Turkey
Registered: 2015-04-25
Posts: 182

Wireless problem

I looked at dmesg two days ago, just for curiosity. I saw something said something like "couldn't run fsck on /dev/sdb1" (it's the /boot partition). I booted with a Live USB, ran fsck, and dmesg didn't show the message anymore. But now there is a wireless problem. I can't connect wireless networks, even can't scan for networks. Some things:

$ lspci
...
07:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
07:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
$ iw dev
phy#0
	Interface wlo1
		ifindex 4
		wdev 0x1
		addr a4:17:31:49:1a:75
		type managed

Current dmesg:

$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.2-2-ARCH (builduser@foutrelis) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Jul 15 08:30:32 UTC 2015
[    0.000000] Command line: initrd=\initramfs-linux.img root=UUID=5e938284-ce63-439d-a388-d8eddcaa6e08 rw quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000959befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000959bf000-0x000000009613ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000096140000-0x000000009a7befff] usable
[    0.000000] BIOS-e820: [mem 0x000000009a7bf000-0x000000009aebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x9395b018-0x93968657] usable ==> usable
[    0.000000] e820: update [mem 0x9394a018-0x9395a057] usable ==> usable
[    0.000000] e820: update [mem 0x9392c018-0x93949457] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040005000-0x000000009392c017] usable
[    0.000000] reserve setup_data: [mem 0x000000009392c018-0x0000000093949457] usable
[    0.000000] reserve setup_data: [mem 0x0000000093949458-0x000000009394a017] usable
[    0.000000] reserve setup_data: [mem 0x000000009394a018-0x000000009395a057] usable
[    0.000000] reserve setup_data: [mem 0x000000009395a058-0x000000009395b017] usable
[    0.000000] reserve setup_data: [mem 0x000000009395b018-0x0000000093968657] usable
[    0.000000] reserve setup_data: [mem 0x0000000093968658-0x00000000959befff] usable
[    0.000000] reserve setup_data: [mem 0x00000000959bf000-0x000000009613ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000096140000-0x000000009a7befff] usable
[    0.000000] reserve setup_data: [mem 0x000000009a7bf000-0x000000009aebefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009affffff] usable
[    0.000000] reserve setup_data: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000015f5fffff] usable
[    0.000000] efi: EFI v2.31 by INSYDE Corp.
[    0.000000] efi:  ACPI=0x9affe000  ACPI 2.0=0x9affe014  SMBIOS=0x9aebef98 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion Sleekbook 15 PC/18FD, BIOS F.00 08/10/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09B000000 mask FFF000000 uncachable
[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 base 15F600000 mask FFFE00000 uncachable
[    0.000000]   7 base 15F800000 mask FFF800000 uncachable
[    0.000000]   8 base 160000000 mask FE0000000 uncachable
[    0.000000]   9 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[    0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[    0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
[    0.000000]  [mem 0x15f400000-0x15f5fffff] page 2M
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x140000000-0x15f3fffff]
[    0.000000]  [mem 0x140000000-0x15f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x120000000-0x13fffffff]
[    0.000000]  [mem 0x120000000-0x13fffffff] page 2M
[    0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0x959befff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0x957fffff] page 2M
[    0.000000]  [mem 0x95800000-0x959befff] page 4k
[    0.000000] init_memory_mapping: [mem 0x96140000-0x9a7befff]
[    0.000000]  [mem 0x96140000-0x961fffff] page 4k
[    0.000000]  [mem 0x96200000-0x9a5fffff] page 2M
[    0.000000]  [mem 0x9a600000-0x9a7befff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
[    0.000000]  [mem 0x9afff000-0x9affffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[    0.000000]  [mem 0x100000000-0x11fffffff] page 2M
[    0.000000] RAMDISK: [mem 0x7fc86000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009AFFE014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000009AFFE210 0000BC (v01 HPQOEM SLIC-MPC 00000001 HP   01000013)
[    0.000000] ACPI: FACP 0x000000009AFFB000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: DSDT 0x000000009AFE9000 00E6DA (v01 HPQOEM INSYDE   00000000 INTL 00040000)
[    0.000000] ACPI: FACS 0x000000009AFBA000 000040
[    0.000000] ACPI: UEFI 0x000000009AFFD000 000236 (v01 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: ASF! 0x000000009AFFC000 0000A5 (v32 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: HPET 0x000000009AFFA000 000038 (v01 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: APIC 0x000000009AFF9000 00008C (v03 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: MCFG 0x000000009AFF8000 00003C (v01 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: WDAT 0x000000009AFE8000 000224 (v01 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009AFE7000 000E21 (v01 HPQOEM INSYDE   00001000 INTL 00040000)
[    0.000000] ACPI: BOOT 0x000000009AFE5000 000028 (v01 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: ASPT 0x000000009AFE3000 000034 (v07 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: DBGP 0x000000009AFE2000 000034 (v01 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: FPDT 0x000000009AFE0000 000044 (v01 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: MSDM 0x000000009AFDF000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009AFDE000 0008A2 (v01 HPQOEM INSYDE   00003000 INTL 00040000)
[    0.000000] ACPI: SSDT 0x000000009AFDD000 000A92 (v01 HPQOEM INSYDE   00003000 INTL 00040000)
[    0.000000] ACPI: DMAR 0x000000009AFDC000 0000B8 (v01 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000009AFD6000 00307D (v01 HPQOEM INSYDE   00001000 INTL 00040000)
[    0.000000] ACPI: UEFI 0x000000009AFDB000 00005C (v01 HPQOEM 18FD     00000000 HP   00040000)
[    0.000000] ACPI: BGRT 0x000000009AFDA000 000038 (v01 HPQOEM 18FD     00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x15f5f6000-0x15f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000015f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000087fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000959befff]
[    0.000000]   node   0: [mem 0x0000000096140000-0x000000009a7befff]
[    0.000000]   node   0: [mem 0x000000009afff000-0x000000009affffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000015f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000015f5fffff]
[    0.000000] On node 0 totalpages: 1020869
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3975 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9785 pages used for memmap
[    0.000000]   DMA32 zone: 626238 pages, LIFO batch:31
[    0.000000]   Normal zone: 6104 pages used for memmap
[    0.000000]   Normal zone: 390656 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x9ba00000-0x9f9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9392c000-0x9392cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x93949000-0x93949fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9394a000-0x9394afff]
[    0.000000] PM: Registered nosave memory: [mem 0x9395a000-0x9395afff]
[    0.000000] PM: Registered nosave memory: [mem 0x9395b000-0x9395bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x93968000-0x93968fff]
[    0.000000] PM: Registered nosave memory: [mem 0x959bf000-0x9613ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9a7bf000-0x9aebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0x9fa00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88015f200000 s95576 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s95576 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1004894
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\initramfs-linux.img root=UUID=5e938284-ce63-439d-a388-d8eddcaa6e08 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3892264K/4083476K available (5696K kernel code, 893K rwdata, 1728K rodata, 1180K init, 1152K bss, 191212K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:8448 nr_irqs:488 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1696.236 MHz processor
[    0.000050] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.82 BogoMIPS (lpj=5654120)
[    0.000054] pid_max: default: 32768 minimum: 301
[    0.000062] ACPI: Core revision 20150410
[    0.014197] ACPI: All ACPI Tables successfully acquired
[    0.044591] Security Framework initialized
[    0.044600] Yama: becoming mindful.
[    0.044964] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.046479] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.047165] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.047175] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.047433] Initializing cgroup subsys blkio
[    0.047437] Initializing cgroup subsys memory
[    0.047445] Initializing cgroup subsys devices
[    0.047448] Initializing cgroup subsys freezer
[    0.047450] Initializing cgroup subsys net_cls
[    0.047481] CPU: Physical Processor ID: 0
[    0.047482] CPU: Processor Core ID: 0
[    0.047488] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.047489] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.048044] mce: CPU supports 7 MCE banks
[    0.048059] CPU0: Thermal monitoring enabled (TM1)
[    0.048066] process: using mwait in idle threads
[    0.048070] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.048072] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.048241] Freeing SMP alternatives memory: 20K (ffffffff81a08000 - ffffffff81a0d000)
[    0.049614] Ignoring BGRT: invalid status 0 (expected 1)
[    0.051187] ftrace: allocating 21545 entries in 85 pages
[    0.065807] dmar: Host address width 36
[    0.065810] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.065818] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.065820] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.065826] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.065827] dmar: RMRR base: 0x0000009ae8c000 end: 0x0000009aeabfff
[    0.065829] dmar: RMRR base: 0x0000009b800000 end: 0x0000009f9fffff
[    0.065832] IOAPIC id 0 under DRHD base  0xfed91000 IOMMU 1
[    0.065834] HPET id 0 under DRHD base 0xfed91000
[    0.066107] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.066117] Enabled IRQ remapping in x2apic mode
[    0.066119] x2apic enabled
[    0.066143] Switched APIC routing to cluster x2apic.
[    0.066630] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.099657] TSC deadline timer enabled
[    0.099661] smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (fam: 06, model: 3a, stepping: 09)
[    0.099694] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.099722] ... version:                3
[    0.099724] ... bit width:              48
[    0.099725] ... generic registers:      4
[    0.099726] ... value mask:             0000ffffffffffff
[    0.099728] ... max period:             0000ffffffffffff
[    0.099729] ... fixed-purpose events:   3
[    0.099730] ... event mask:             000000070000000f
[    0.119798] x86: Booting SMP configuration:
[    0.119801] .... node  #0, CPUs:      #1
[    0.133699] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.140362]  #2 #3
[    0.174638] x86: Booted up 1 node, 4 CPUs
[    0.174642] smpboot: Total of 4 processors activated (13575.30 BogoMIPS)
[    0.179177] devtmpfs: initialized
[    0.182566] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[    0.182694] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.182824] pinctrl core: initialized pinctrl subsystem
[    0.182871] RTC time:  1:14:23, date: 07/18/15
[    0.183020] NET: Registered protocol family 16
[    0.195633] cpuidle: using governor ladder
[    0.208987] cpuidle: using governor menu
[    0.209079] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.209081] ACPI: bus type PCI registered
[    0.209083] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.209176] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.209179] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.209303] PCI: Using configuration type 1 for base access
[    0.209535] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.222782] ACPI: Added _OSI(Module Device)
[    0.222784] ACPI: Added _OSI(Processor Device)
[    0.222786] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.222788] ACPI: Added _OSI(Processor Aggregator Device)
[    0.226651] ACPI: Executed 1 blocks of module-level executable AML code
[    0.229656] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.230650] ACPI: Dynamic OEM Table Load:
[    0.230665] ACPI: SSDT 0xFFFF880159910000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20111123)
[    0.231470] ACPI: Dynamic OEM Table Load:
[    0.231482] ACPI: SSDT 0xFFFF8801598E1400 000303 (v01 PmRef  ApIst    00003000 INTL 20111123)
[    0.232176] ACPI: Dynamic OEM Table Load:
[    0.232185] ACPI: SSDT 0xFFFF880159887000 000119 (v01 PmRef  ApCst    00003000 INTL 20111123)
[    0.233430] ACPI : EC: EC started
[    0.393423] ACPI: Interpreter enabled
[    0.393436] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.393443] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.393466] ACPI: (supports S0 S3 S4 S5)
[    0.393468] ACPI: Using IOAPIC for interrupt routing
[    0.393510] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.400627] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.400635] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.400721] \_SB_.PCI0:_OSC invalid UUID
[    0.400722] _OSC request data:1 1f 0 
[    0.400728] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.401074] PCI host bridge to bus 0000:00
[    0.401078] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.401081] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.401083] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.401086] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.401088] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.401091] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.401093] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.401095] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.401098] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.401100] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.401102] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.401105] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.401107] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.401109] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.401112] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.401114] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.401116] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.401119] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[    0.401129] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.401245] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.401287] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.401336] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.401397] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.401412] pci 0000:00:02.0: reg 0x10: [mem 0xd3000000-0xd33fffff 64bit]
[    0.401421] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.401428] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.401594] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.401625] pci 0000:00:14.0: reg 0x10: [mem 0xd3600000-0xd360ffff 64bit]
[    0.401721] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.401770] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.401824] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.401856] pci 0000:00:16.0: reg 0x10: [mem 0xd3614000-0xd361400f 64bit]
[    0.401950] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.402062] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.402087] pci 0000:00:1a.0: reg 0x10: [mem 0xd3619000-0xd36193ff]
[    0.402194] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.402474] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.402532] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.402561] pci 0000:00:1b.0: reg 0x10: [mem 0xd3610000-0xd3613fff 64bit]
[    0.402666] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.402722] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.402777] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.402873] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.402922] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.402977] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.403075] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.403125] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.403177] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.403276] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.403326] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.403387] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.403414] pci 0000:00:1d.0: reg 0x10: [mem 0xd3618000-0xd36183ff]
[    0.403525] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.403783] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.403839] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.404058] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[    0.404084] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.404098] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.404110] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.404124] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.404135] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.404149] pci 0000:00:1f.2: reg 0x24: [mem 0xd3617000-0xd36177ff]
[    0.404200] pci 0000:00:1f.2: PME# supported from D3hot
[    0.404292] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.404316] pci 0000:00:1f.3: reg 0x10: [mem 0xd3615000-0xd36150ff 64bit]
[    0.404351] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.404524] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[    0.404543] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.404561] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.404579] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[    0.404591] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.404603] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.404708] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.412689] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.412693] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.412697] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.412703] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.412791] pci 0000:07:00.0: [1814:3290] type 00 class 0x028000
[    0.412820] pci 0000:07:00.0: reg 0x10: [mem 0xd3510000-0xd351ffff]
[    0.412995] pci 0000:07:00.0: PME# supported from D0 D3hot
[    0.413108] pci 0000:07:00.1: [1814:3298] type 00 class 0x0d1100
[    0.413136] pci 0000:07:00.1: reg 0x10: [mem 0xd3500000-0xd350ffff]
[    0.413308] pci 0000:07:00.1: supports D1
[    0.413310] pci 0000:07:00.1: PME# supported from D0 D1 D3hot
[    0.422741] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.422749] pci 0000:00:1c.0:   bridge window [mem 0xd3500000-0xd35fffff]
[    0.422850] pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
[    0.422879] pci 0000:08:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.422919] pci 0000:08:00.0: reg 0x18: [mem 0xd3404000-0xd3404fff 64bit pref]
[    0.422945] pci 0000:08:00.0: reg 0x20: [mem 0xd3400000-0xd3403fff 64bit pref]
[    0.423054] pci 0000:08:00.0: supports D1 D2
[    0.423057] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.423124] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.432725] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.432732] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.432746] pci 0000:00:1c.1:   bridge window [mem 0xd3400000-0xd34fffff 64bit pref]
[    0.432910] pci 0000:09:00.0: [10ec:5229] type 00 class 0xff0000
[    0.432985] pci 0000:09:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
[    0.433469] pci 0000:09:00.0: supports D1 D2
[    0.433471] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
[    0.442778] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[    0.442784] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.442790] pci 0000:00:1c.2:   bridge window [mem 0xd1000000-0xd1ffffff]
[    0.442797] pci 0000:00:1c.2:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.443530] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.443597] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.443661] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.443724] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.443786] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.443848] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.443910] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.443974] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.444101] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.444162] ACPI : EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[    0.444287] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.444290] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.444294] vgaarb: loaded
[    0.444296] vgaarb: bridge control possible 0000:00:02.0
[    0.444499] PCI: Using ACPI for IRQ routing
[    0.447150] PCI: pci_cache_line_size set to 64 bytes
[    0.447284] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.447286] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.447288] e820: reserve RAM buffer [mem 0x9392c018-0x93ffffff]
[    0.447290] e820: reserve RAM buffer [mem 0x9394a018-0x93ffffff]
[    0.447292] e820: reserve RAM buffer [mem 0x9395b018-0x93ffffff]
[    0.447294] e820: reserve RAM buffer [mem 0x959bf000-0x97ffffff]
[    0.447296] e820: reserve RAM buffer [mem 0x9a7bf000-0x9bffffff]
[    0.447298] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[    0.447300] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
[    0.447443] NetLabel: Initializing
[    0.447445] NetLabel:  domain hash size = 128
[    0.447446] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.447461] NetLabel:  unlabeled traffic allowed by default
[    0.447490] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.447497] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.449534] Switched to clocksource hpet
[    0.456304] pnp: PnP ACPI init
[    0.456718] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.456721] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.456724] system 00:00: [io  0xffff] has been reserved
[    0.456727] system 00:00: [io  0xffff] has been reserved
[    0.456730] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.456732] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.456735] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.456737] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.456739] system 00:00: [io  0x0454-0x0457] has been reserved
[    0.456742] system 00:00: [io  0x0380-0x0387] has been reserved
[    0.456747] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.456792] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.456846] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.456899] pnp 00:03: Plug and Play ACPI device, IDs SYN1e83 SYN1e00 SYN0002 PNP0f13 (active)
[    0.457134] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.457137] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.457140] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.457142] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.457145] system 00:04: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.457148] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.457151] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.457154] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    0.457156] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.457159] system 00:04: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    0.457163] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.457407] system 00:05: [mem 0x20000000-0x201fffff] has been reserved
[    0.457410] system 00:05: [mem 0x40004000-0x40004fff] has been reserved
[    0.457414] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.457434] pnp: PnP ACPI: found 6 devices
[    0.464368] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.464379] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.464428] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[    0.464432] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.464435] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.464439] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.464443] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.464448] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.464456] pci 0000:00:1c.0:   bridge window [mem 0xd3500000-0xd35fffff]
[    0.464468] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.464472] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.464483] pci 0000:00:1c.1:   bridge window [mem 0xd3400000-0xd34fffff 64bit pref]
[    0.464490] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[    0.464494] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.464501] pci 0000:00:1c.2:   bridge window [mem 0xd1000000-0xd1ffffff]
[    0.464508] pci 0000:00:1c.2:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.464517] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.464519] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.464522] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.464524] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.464527] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.464529] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.464532] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.464534] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.464537] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.464539] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.464541] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.464544] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.464546] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.464549] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.464551] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.464553] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.464556] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
[    0.464558] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.464561] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
[    0.464563] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.464566] pci_bus 0000:07: resource 1 [mem 0xd3500000-0xd35fffff]
[    0.464568] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
[    0.464571] pci_bus 0000:08: resource 2 [mem 0xd3400000-0xd34fffff 64bit pref]
[    0.464573] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.464576] pci_bus 0000:09: resource 1 [mem 0xd1000000-0xd1ffffff]
[    0.464578] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.464621] NET: Registered protocol family 2
[    0.464874] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.464980] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.465072] TCP: Hash tables configured (established 32768 bind 32768)
[    0.465103] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.465123] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.465191] NET: Registered protocol family 1
[    0.465212] pci 0000:00:02.0: Video device with shadowed ROM
[    0.493077] PCI: CLS 64 bytes, default 64
[    0.493138] Unpacking initramfs...
[    0.579564] Freeing initrd memory: 3560K (ffff88007fc86000 - ffff880080000000)
[    0.579613] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.579617] software IO TLB [mem 0x8f92c000-0x9392c000] (64MB) mapped at [ffff88008f92c000-ffff88009392bfff]
[    0.579650] Simple Boot Flag at 0x44 set to 0x1
[    0.579687] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.579689] hw unit of domain pp0-core 2^-16 Joules
[    0.579691] hw unit of domain package 2^-16 Joules
[    0.579692] hw unit of domain pp1-gpu 2^-16 Joules
[    0.579867] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[    0.579876] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[    0.579886] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[    0.579897] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[    0.579957] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.579996] Scanning for low memory corruption every 60 seconds
[    0.580376] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.580406] Initialise system trusted keyring
[    0.580893] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.582839] zpool: loaded
[    0.582843] zbud: loaded
[    0.583100] VFS: Disk quotas dquot_6.6.0
[    0.583147] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.583359] Key type big_key registered
[    0.583637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.583694] io scheduler noop registered
[    0.583698] io scheduler deadline registered
[    0.583738] io scheduler cfq registered (default)
[    0.584430] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.584451] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.584476] efifb: probing for efifb
[    0.584498] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 3072k, total 3072k
[    0.584500] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.584501] efifb: scrolling: redraw
[    0.584503] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.587265] Console: switching to colour frame buffer device 128x48
[    0.589913] fb0: EFI VGA frame buffer device
[    0.589927] intel_idle: MWAIT substates: 0x21120
[    0.589928] intel_idle: v0.4 model 0x3A
[    0.589930] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.590175] GHES: HEST is not enabled!
[    0.590259] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.590791] Linux agpgart interface v0.103
[    0.591213] rtc_cmos 00:01: RTC can wake from S4
[    0.591358] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.591397] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.591413] Intel P-state driver initializing.
[    0.591579] ledtrig-cpu: registered to indicate activity on CPUs
[    0.592439] NET: Registered protocol family 10
[    0.593010] NET: Registered protocol family 17
[    0.593936] Loading compiled-in X.509 certificates
[    0.593968] registered taskstats version 1
[    0.595081]   Magic number: 7:628:205
[    0.595127] acpi device:2d: hash matches
[    0.595259] rtc_cmos 00:01: setting system clock to 2015-07-18 01:14:23 UTC (1437182063)
[    0.595530] PM: Hibernation image not present or could not be loaded.
[    0.596229] Freeing unused kernel memory: 1180K (ffffffff818e1000 - ffffffff81a08000)
[    0.596232] Write protecting the kernel read-only data: 8192k
[    0.596986] Freeing unused kernel memory: 436K (ffff880001593000 - ffff880001600000)
[    0.597270] Freeing unused kernel memory: 320K (ffff8800017b0000 - ffff880001800000)
[    0.613236] random: systemd-tmpfile urandom read with 16 bits of entropy available
[    0.659100] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.667424] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.667502] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.668961] ACPI: bus type USB registered
[    0.668999] usbcore: registered new interface driver usbfs
[    0.669016] usbcore: registered new interface driver hub
[    0.669056] usbcore: registered new device driver usb
[    0.669621] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.669710] rtsx_pci 0000:09:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 27
[    0.669871] ehci-pci: EHCI PCI platform driver
[    0.670022] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.670032] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.670077] ehci-pci 0000:00:1a.0: debug port 2
[    0.670799] SCSI subsystem initialized
[    0.671968] libata version 3.00 loaded.
[    0.674004] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.674028] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd3619000
[    0.683051] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.683317] hub 1-0:1.0: USB hub found
[    0.683329] hub 1-0:1.0: 2 ports detected
[    0.683650] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.683659] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.683674] ehci-pci 0000:00:1d.0: debug port 2
[    0.687593] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.687617] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd3618000
[    0.696395] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.696608] hub 2-0:1.0: USB hub found
[    0.696616] hub 2-0:1.0: 2 ports detected
[    0.696867] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.696884] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.696893] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.696988] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    0.696996] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.697184] hub 3-0:1.0: USB hub found
[    0.697195] hub 3-0:1.0: 4 ports detected
[    0.697733] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.697739] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.697952] hub 4-0:1.0: USB hub found
[    0.697967] hub 4-0:1.0: 4 ports detected
[    0.698413] ahci 0000:00:1f.2: version 3.0
[    0.698939] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode
[    0.698943] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.703788] scsi host0: ahci
[    0.703917] scsi host1: ahci
[    0.704034] scsi host2: ahci
[    0.704147] scsi host3: ahci
[    0.704259] scsi host4: ahci
[    0.704370] scsi host5: ahci
[    0.704421] ata1: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617100 irq 29
[    0.704424] ata2: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617180 irq 29
[    0.704426] ata3: DUMMY
[    0.704427] ata4: DUMMY
[    0.704428] ata5: DUMMY
[    0.704428] ata6: DUMMY
[    0.989878] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.003246] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.023216] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.023251] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.024584] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA7A0, max UDMA/100
[    1.024593] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.026087] ata1.00: configured for UDMA/100
[    1.026552] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 A7A0 PQ: 0 ANSI: 5
[    1.048877] ata2.00: ATA-8: LITEONIT LMT-32L3M-HP, LWE3, max UDMA/133
[    1.048887] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.049278] ata2.00: configured for UDMA/133
[    1.049637] scsi 1:0:0:0: Direct-Access     ATA      LITEONIT LMT-32L LWE3 PQ: 0 ANSI: 5
[    1.056087] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.056099] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.056213] sd 0:0:0:0: [sda] Write Protect is off
[    1.056224] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.056277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.056564] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.056955] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    1.056965] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.057149] sd 1:0:0:0: [sdb] Write Protect is off
[    1.057159] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.057220] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.059642]  sdb: sdb1 sdb2
[    1.060684] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.114153] hub 1-1:1.0: USB hub found
[    1.114307] hub 1-1:1.0: 6 ports detected
[    1.121364]  sda: sda1 sda2
[    1.122192] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.127265] hub 2-1:1.0: USB hub found
[    1.127425] hub 2-1:1.0: 8 ports detected
[    1.390053] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[    1.476545] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    1.558120] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.558164] systemd[1]: Inserted module 'ip_tables'
[    1.583455] tsc: Refined TSC clocksource calibration: 1696.145 MHz
[    1.583460] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x1872ed9f898, max_idle_ns: 440795284225 ns
[    1.595652] systemd[1]: systemd 221 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[    1.595776] systemd[1]: Detected architecture x86-64.
[    1.596013] systemd[1]: Set hostname to <arda-laptop>.
[    1.668917] systemd[1]: Reached target Encrypted Volumes.
[    1.668928] systemd[1]: Starting Encrypted Volumes.
[    1.669089] systemd[1]: Created slice Root Slice.
[    1.669098] systemd[1]: Starting Root Slice.
[    1.669127] systemd[1]: Listening on udev Kernel Socket.
[    1.669134] systemd[1]: Starting udev Kernel Socket.
[    1.669161] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.669168] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    1.669206] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.669213] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    1.669329] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.669339] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    1.669376] systemd[1]: Listening on Journal Socket.
[    1.669387] systemd[1]: Starting Journal Socket.
[    1.669413] systemd[1]: Listening on LVM2 metadata daemon socket.
[    1.669420] systemd[1]: Starting LVM2 metadata daemon socket.
[    1.673888] systemd[1]: Listening on Journal Audit Socket.
[    1.673945] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.673954] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    1.673987] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.673995] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    1.674005] systemd[1]: Reached target Remote File Systems.
[    1.674011] systemd[1]: Starting Remote File Systems.
[    1.674049] systemd[1]: Listening on udev Control Socket.
[    1.674056] systemd[1]: Starting udev Control Socket.
[    1.674069] systemd[1]: Reached target Login Prompts.
[    1.674075] systemd[1]: Starting Login Prompts.
[    1.674179] systemd[1]: Created slice User and Session Slice.
[    1.674186] systemd[1]: Starting User and Session Slice.
[    1.674248] systemd[1]: Set up automount EFI System Partition Automount.
[    1.674256] systemd[1]: Starting EFI System Partition Automount.
[    1.674282] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.674289] systemd[1]: Starting Journal Socket (/dev/log).
[    1.674372] systemd[1]: Created slice System Slice.
[    1.674383] systemd[1]: Starting System Slice.
[    1.675250] systemd[1]: Starting Set Up Additional Binary Formats...
[    1.675611] systemd[1]: Starting Setup Virtual Console...
[    1.676007] systemd[1]: Starting Journal Service...
[    1.676130] systemd[1]: Created slice system-getty.slice.
[    1.676142] systemd[1]: Starting system-getty.slice.
[    1.676571] systemd[1]: Mounting Debug File System...
[    1.676601] systemd[1]: Reached target Slices.
[    1.676617] systemd[1]: Starting Slices.
[    1.677491] systemd[1]: Mounting POSIX Message Queue File System...
[    1.678095] systemd[1]: Mounting Huge Pages File System...
[    1.680424] systemd[1]: Started Load Kernel Modules.
[    1.681149] systemd[1]: Starting Apply Kernel Variables...
[    1.681176] systemd[1]: Mounted FUSE Control File System.
[    1.681714] systemd[1]: Mounting Configuration File System...
[    1.681738] systemd[1]: Started File System Check on Root Device.
[    1.682200] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.682741] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    1.683647] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 173 (systemd-binfmt)
[    1.684276] systemd[1]: Mounted Debug File System.
[    1.684823] systemd[1]: Mounted Huge Pages File System.
[    1.684859] systemd[1]: Mounted POSIX Message Queue File System.
[    1.685402] systemd[1]: Mounted Configuration File System.
[    1.686143] EXT4-fs (sdb2): re-mounted. Opts: discard
[    1.686149] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    1.687048] systemd[1]: Started Remount Root and Kernel File Systems.
[    1.688179] systemd[1]: Starting Load/Save Random Seed...
[    1.688213] systemd[1]: Started First Boot Wizard.
[    1.688266] systemd[1]: Started Rebuild Dynamic Linker Cache.
[    1.688293] systemd[1]: Started Create System Users.
[    1.691267] systemd[1]: Started Rebuild Hardware Database.
[    1.691773] systemd[1]: Starting udev Coldplug all Devices...
[    1.692220] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.692601] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    1.697879] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    1.698546] systemd[1]: Started Apply Kernel Variables.
[    1.699623] systemd[1]: Started Set Up Additional Binary Formats.
[    1.699855] systemd[1]: Started Load/Save Random Seed.
[    1.723818] systemd[1]: Started udev Coldplug all Devices.
[    1.738127] systemd[1]: Started Create Static Device Nodes in /dev.
[    1.738744] systemd[1]: Starting udev Kernel Device Manager...
[    1.738771] systemd[1]: Reached target Local File Systems (Pre).
[    1.738787] systemd[1]: Starting Local File Systems (Pre).
[    1.738809] systemd[1]: Mounted Virtual Machine and Container Storage.
[    1.741364] systemd[1]: Mounting /tmp...
[    1.743208] systemd[1]: Mounted /tmp.
[    1.753658] systemd[1]: Started Setup Virtual Console.
[    1.858114] systemd[1]: Started udev Kernel Device Manager.
[    1.884358] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.884836] ACPI: Lid Switch [LID0]
[    1.884921] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    1.884926] ACPI: Power Button [PWRB]
[    1.885012] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.885015] ACPI: Power Button [PWRF]
[    1.886925] ACPI: AC Adapter [ACAD] (on-line)
[    1.887798] [Firmware Bug]: Invalid critical threshold (0)
[    1.893059] thermal LNXTHERM:00: registered as thermal_zone0
[    1.893063] ACPI: Thermal Zone [TZ01] (58 C)
[    1.896652] hp_accel: laptop model unknown, using default axes configuration
[    1.897533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.900566] Initializing HPQ6001 module
[    1.910643] lis3lv02d: 8 bits 3DC sensor found
[    1.952817] [drm] Initialized drm 1.1.0 20060810
[    1.953059] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254)
[    1.953067] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.953071] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[    1.953077] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150410/utaddress-254)
[    1.953081] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150410/utaddress-254)
[    1.953086] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.953088] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[    1.953092] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150410/utaddress-254)
[    1.953097] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150410/utaddress-254)
[    1.953101] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.953103] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[    1.953107] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150410/utaddress-254)
[    1.953112] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150410/utaddress-254)
[    1.953117] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.953118] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.953648] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input5
[    1.954132] input: HP Wireless hotkeys as /devices/virtual/input/input6
[    1.955937] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.955950] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.956617] r8169 0000:08:00.0 eth0: RTL8105e at 0xffffc90000660000, 84:34:97:79:9a:7c, XID 00c00000 IRQ 31
[    1.956781] media: Linux media interface: v0.10
[    1.957234] ACPI Warning: SystemIO range 0x0000000000005040-0x000000000000505F conflicts with OpRegion 0x0000000000005040-0x000000000000504F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
[    1.957282] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.958269] usbcore: registered new interface driver cdc_ether
[    1.959207] ACPI: Battery Slot [BAT0] (battery present)
[    1.959675] wmi: Mapper loaded
[    1.964534] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1, RNDIS device, 02:0e:0d:01:30:39
[    1.964563] usbcore: registered new interface driver rndis_host
[    1.989030] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    1.994047] Linux video capture interface: v2.00
[    2.012019] AVX version of gcm_enc/dec engaged.
[    2.012022] AES CTR mode by8 optimization enabled
[    2.021505] cfg80211: Calling CRDA to update world regulatory domain
[    2.024681] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b35f)
[    2.031116] input: HP Truevision HD as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input9
[    2.031329] usbcore: registered new interface driver uvcvideo
[    2.031331] USB Video Class driver (1.1.1)
[    2.033830] iTCO_vendor_support: vendor-support=0
[    2.035884] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.035929] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    2.036062] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.041551] r8169 0000:08:00.0 eno1: renamed from eth0
[    2.045258] random: nonblocking pool is initialized
[    2.056195] systemd[1]: Found device LITEONIT_LMT-32L3M-HP boot.
[    2.056826] systemd[1]: Mounting /boot...
[    2.059117] input: HP WMI hotkeys as /devices/virtual/input/input10
[    2.060622] [drm] Memory usable by graphics device = 2048M
[    2.060627] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    2.060629] fb: switching to inteldrmfb from EFI VGA
[    2.060654] Console: switching to colour dummy device 80x25
[    2.060742] [drm] Replacing VGA console driver
[    2.068095] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.068099] [drm] Driver supports precise vblank timestamp query.
[    2.069217] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.070808] rndis_host 3-1:1.0 enp0s20u1: renamed from usb0
[    2.073774] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD99BXX: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    2.073779] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.073782] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    2.073785] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    2.073787] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    2.073790] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    2.073793] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[    2.085992] systemd[1]: Mounted /boot.
[    2.095273] intel_rapl: Found RAPL domain package
[    2.095277] intel_rapl: Found RAPL domain core
[    2.095279] intel_rapl: Found RAPL domain uncore
[    2.105174] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    2.105403] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    2.105495] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input14
[    2.106621] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.106731] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[    2.106821] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[    2.115692] cfg80211: World regulatory domain updated:
[    2.115696] cfg80211:  DFS Master region: unset
[    2.115698] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    2.115701] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    2.115704] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    2.115706] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    2.115708] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    2.115711] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    2.115714] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    2.115716] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    2.115718] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    2.123816] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[    2.126641] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.127222] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    2.127298] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    2.127376] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    2.127608] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[    2.128556] systemd[1]: Reached target Sound Card.
[    2.128577] systemd[1]: Starting Sound Card.
[    2.130489] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.132552] rt2800pci 0000:07:00.0 wlo1: renamed from wlan0
[    2.133593] systemd[1]: Created slice system-systemd\x2drfkill.slice.
[    2.133607] systemd[1]: Starting system-systemd\x2drfkill.slice.
[    2.134000] systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill0...
[    2.138773] systemd[1]: Started Load/Save RF Kill Switch Status of rfkill0.
[    2.167013] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    2.181437] fbcon: inteldrmfb (fb0) is primary device
[    2.262631] systemd[1]: Found device Hitachi_HTS545050A7E380 home.
[    2.264438] systemd[1]: Mounting /home...
[    2.320794] systemd[1]: Started Journal Service.
[    2.321351] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[    2.339214] systemd-journald[175]: Received request to flush runtime journal from PID 1
[    2.479801] Adding 3999996k swap on /dev/sda1.  Priority:-1 extents:1 across:3999996k FS
[    2.583942] Switched to clocksource tsc
[    2.740485] psmouse serio1: synaptics: queried max coordinates: x [..5734], y [..4974]
[    2.771561] psmouse serio1: synaptics: queried min coordinates: x [1222..], y [910..]
[    2.832384] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400, board id: 2068, fw id: 1028260
[    2.871793] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[    2.873619] mousedev: PS/2 mouse device common for all mice
[    2.947750] Console: switching to colour frame buffer device 170x48
[    2.950905] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.950906] i915 0000:00:02.0: registered panic notifier
[    3.007073] r8169 0000:08:00.0 eno1: link down
[    3.009587] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[    3.010554] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[    3.742871] fuse init (API version 7.23)
[    4.361436] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[    5.695337] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[    5.695351] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[    7.095912] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[    8.429826] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[    8.429831] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[    9.777166] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   11.111067] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   11.111081] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   12.458298] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   13.792237] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   13.792243] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   15.139510] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   16.473435] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   16.473441] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   17.844055] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   19.181349] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   19.181360] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   20.528684] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   21.862561] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   21.862574] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   23.216491] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   24.550400] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   24.550416] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   25.897673] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   27.231635] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   27.231648] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   28.582246] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   29.916098] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   29.916104] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   31.263450] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   32.597275] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   32.597280] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   33.944531] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   35.278446] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   35.278452] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   36.625719] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   37.959620] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   37.959626] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   39.306865] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   40.640798] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   40.640804] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   41.988048] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   43.321988] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   43.322019] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   44.669253] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   46.003142] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   46.003153] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   47.350385] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   48.684297] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   48.684304] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   50.031595] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   51.365485] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   51.365494] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   52.719398] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   54.053338] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[   54.053346] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[   55.403906] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]

Last edited by betseg (2015-07-18 01:19:28)

Offline

Board footer

Powered by FluxBB