You are not logged in.
I have GTX460 and I use nvidia's binary blob. It has 3 video outputs, but only 2 can be active at the same time. I connected 2 monitors via DVI and TV via HDMI. I can easly switch 2 active outputs as I want (using nvidia-settings or systemsettings5), but I'd like to change default state. Currently when TV is connected it always gets signal (also when I connect it while working with 2 monitors signal switches from one of monitors to it). I'd like to prioritize monitors and switch signal to TV only on demand. How can I do that?
Last edited by Abaddon (2015-08-10 09:06:34)
Gnome - The weakest link!
Linux, *not* GNU/Linux!
Offline
I tried to use nvidiaXineramaInfoOrder, but it changed nothing:
[ 3.401] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 3.401] (==) NVIDIA(0): RGB weight 888
[ 3.401] (==) NVIDIA(0): Default visual is TrueColor
[ 3.401] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3.402] (**) NVIDIA(0): Option "NoLogo" "true"
[ 3.402] (**) NVIDIA(0): Option "HWcursor" "1"
[ 3.402] (**) NVIDIA(0): Option "RenderAccel" "true"
[ 3.402] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0, DFP-2, DFP-1"
[ 3.402] (**) NVIDIA(0): Option "TripleBuffer" "1"
[ 3.402] (**) NVIDIA(0): Option "DamageEvents" "true"
[ 3.402] (**) NVIDIA(0): Enabling RENDER acceleration
[ 3.402] (**) NVIDIA(0): Option "Coolbits" "28"
[ 3.402] (**) NVIDIA(0): Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x3333"
[ 3.402] (**) NVIDIA(0): Enabling 2D acceleration
[ 4.050] (II) NVIDIA: Allocated GPU:0 (GPU-24be3273-b83a-345b-75f5-a6d9c2a797bc) @
[ 4.050] (II) NVIDIA: PCI:0000:01:00.0
[ 4.095] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 4.095] (--) NVIDIA(0): CRT-0
[ 4.095] (--) NVIDIA(0): CRT-1
[ 4.095] (--) NVIDIA(0): DFP-0 (boot)
[ 4.095] (--) NVIDIA(0): DFP-1
[ 4.095] (--) NVIDIA(0): DFP-2
[ 4.124] (--) NVIDIA(0): CRT-0: disconnected
[ 4.124] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 4.124] (--) NVIDIA(0):
[ 4.139] (--) NVIDIA(0): CRT-1: disconnected
[ 4.139] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 4.139] (--) NVIDIA(0):
[ 4.197] (--) NVIDIA(0): Idek Iiyama PL2209HD (DFP-0): connected
[ 4.197] (--) NVIDIA(0): Idek Iiyama PL2209HD (DFP-0): Internal TMDS
[ 4.197] (--) NVIDIA(0): Idek Iiyama PL2209HD (DFP-0): 330.0 MHz maximum pixel clock
[ 4.197] (--) NVIDIA(0):
[ 4.227] (--) NVIDIA(0): Panasonic-TV (DFP-1): connected
[ 4.227] (--) NVIDIA(0): Panasonic-TV (DFP-1): Internal TMDS
[ 4.227] (--) NVIDIA(0): Panasonic-TV (DFP-1): 165.0 MHz maximum pixel clock
[ 4.227] (--) NVIDIA(0):
[ 4.256] (--) NVIDIA(0): DELL U2412M (DFP-2): connected
[ 4.256] (--) NVIDIA(0): DELL U2412M (DFP-2): Internal TMDS
[ 4.256] (--) NVIDIA(0): DELL U2412M (DFP-2): 330.0 MHz maximum pixel clock
[ 4.256] (--) NVIDIA(0):
[ 4.256] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 4.257] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:1:0:0 (GPU-0)
[ 4.257] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 4.257] (--) NVIDIA(0): VideoBIOS: 70.04.1b.00.02
[ 4.257] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4.303] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4.303] (**) NVIDIA(0): device Idek Iiyama PL2209HD (DFP-0) (Using EDID
[ 4.303] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 4.305] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4.305] (**) NVIDIA(0): device Panasonic-TV (DFP-1) (Using EDID frequencies has
[ 4.305] (**) NVIDIA(0): been enabled on all display devices.)
[ 4.307] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4.307] (**) NVIDIA(0): device DELL U2412M (DFP-2) (Using EDID frequencies has
[ 4.307] (**) NVIDIA(0): been enabled on all display devices.)
[ 4.308] (==) NVIDIA(0):
[ 4.308] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4.308] (==) NVIDIA(0): will be used as the requested mode.
[ 4.308] (==) NVIDIA(0):
[ 4.309] (II) NVIDIA(0): Validated MetaModes:
[ 4.309] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 4.309] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 4.317] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 4.317] (--) NVIDIA(0): option
[ 4.317] (--) Depth 24 pixmap format is 32 bpp
[ 4.317] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 4.317] (II) NVIDIA: access.
[ 4.320] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 4.320] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 4.320] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 4.320] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 4.320] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 4.320] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 4.320] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 4.320] (II) NVIDIA(0): Config Options in the README.
[ 4.337] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"Gnome - The weakest link!
Linux, *not* GNU/Linux!
Offline
I used Option "UseDisplayDevice" "DFP-0, DFP-2" additionally and now it works as I wanted.
Gnome - The weakest link!
Linux, *not* GNU/Linux!
Offline