Arch Linux

L1ghtmareI

Member

Registered: 2014-08-29

Posts: 96

A couple PulseAudio issues

Hello fellow Archers.

Recently I've changed my output device from analog from sound card to USB headphones. Overall everything is working fine, but there are issues with certain applications, namely wine.

1) Every single application (even installed after I started using USB headphones) defaults output to sound card despite the fact that G930 is given top priority in every section of KDE audio setup and is even set as default device in default.pa. The change I make in drop menu persists through reboot, however I still have to change it at first launch, which is sometimes impossible when app outputs sound for brief periods of time. Strangely enough, I didn't have to make the change for KNotify and probably couple other KDE apps.
2) Wine has this rife issue with crackling and sped up sound. I tried all standard cures (lowering packet size or something along the lines, disabling timer scheduling, selecting device as default in winecfg) to no success. The new device appeared only in default winecfg, but not in wineprefixes. I have to mention that I had this issue once before on analog headphones, I don't know what caused it and it resolved itself with the configuration update after wine got updated. The device in PA volume control is set to G930, same with other applications.
3) Audacity is sometimes (like, first 2-4 times) having the same issue while playing, though after some tries it comes back to normal. Still pretty much unusable. If I press 'Stop' button while Audacity is playing distorted sound, it crashes.

asound.conf:

# Use PulseAudio by default
pcm.!default {
  type pulse
  fallback "sysdefault"
  hint {
    show on
    description "Default ALSA Output (currently PulseAudio Sound Server)"
  }
}

ctl.!default {
  type pulse
  fallback "sysdefault"
}

# vim:set ft=alsaconf:

/etc/pulse/default.pa :

#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.nofail

### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
load-module module-alsa-sink device=hw:4,0
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect 
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.

### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system

### Register ourselves in the X11 session manager
#load-module module-x11-xsmp

### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif

### Make some devices default
set-default-sink 2
#set-default-source input

/etc/pulse/daemon.conf :

# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

exit-idle-time=0
; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no

; flat-volumes = yes

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000

; default-sample-format = s16le
;default-sample-rate = 48000
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right

; default-fragments = 4
; default-fragment-size-msec = 25

; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0

(before I posted this default-sample-rate wasn't commented out)

aplay -l       
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 3: Audigy [SB Audigy 1 ES [SB0160]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
  Subdevices: 31/32
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
  Subdevice #7: subdevice #7
  Subdevice #8: subdevice #8
  Subdevice #9: subdevice #9
  Subdevice #10: subdevice #10
  Subdevice #11: subdevice #11
  Subdevice #12: subdevice #12
  Subdevice #13: subdevice #13
  Subdevice #14: subdevice #14
  Subdevice #15: subdevice #15
  Subdevice #16: subdevice #16
  Subdevice #17: subdevice #17
  Subdevice #18: subdevice #18
  Subdevice #19: subdevice #19
  Subdevice #20: subdevice #20
  Subdevice #21: subdevice #21
  Subdevice #22: subdevice #22
  Subdevice #23: subdevice #23
  Subdevice #24: subdevice #24
  Subdevice #25: subdevice #25
  Subdevice #26: subdevice #26
  Subdevice #27: subdevice #27
  Subdevice #28: subdevice #28
  Subdevice #29: subdevice #29
  Subdevice #30: subdevice #30
  Subdevice #31: subdevice #31
card 3: Audigy [SB Audigy 1 ES [SB0160]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
  Subdevices: 8/8
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
  Subdevice #7: subdevice #7
card 3: Audigy [SB Audigy 1 ES [SB0160]], device 3: emu10k1 [Multichannel Playback]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 4: Headset [Logitech G930 Headset], device 0: USB Audio [USB Audio]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

BTW, is there any driver that would allow me to use G930's surround sound? I couldn't find one, so I assumed it doesn't exist. Thankfully this wasn't the selling point for me.

P.S.: After I wrote this, I decided to do something from 'Troubleshooting' article on wiki. So I did everything from the section Setting the default fragment number and buffer size in PulseAudio, but I didn't even uncomment lines in daemon.conf (though value for fragment size would be 1 msec while default is 25). After I rebooted, PulseAudio didn't even launch (obviously), so I deleted ~/.config/pulse/client.conf. However, damage was done: half my audio devices were greyed out in system settings, 'G930 Analog Stereo' among them. For some reason I have device called just 'G930'. which works just fine; however, I can't use my mic anymore.

P.P.S.: So after next reboot devices reappeared, but greyed out devices are still there with (IEC958) appended. On previous boot there was system message about sound card being removed (not sure if the code was the same though), which obviously didn't happen. It appears I really need help with this.

Last edited by L1ghtmareI (2015-08-21 13:31:20)

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 25,076

Re: A couple PulseAudio issues

Phonon configuration only applies to phonon apps (read KDE applications) to make general adjustments to pulseaudio you should be using pavucontrol. Set whichever device you want to be default as the fallback device in pavucontrol, this should make never before seen streams default to the usb. To make before seen streams (which retain the device they have last been switched to) also respect this, do any of the following: https://wiki.archlinux.org/index.php/Pu … _respected 

Phonon's concept of soundcards is somewhat flawed, you probably see different profiles which can be switched around from the Configuration tab in pavucontrol (or the middle tab in phonon) and only one profile can be active per card but phonon shows them as seperate cards and greys them out if you have switched the profile (and offers to remove it, which is nonsense in most cases, so always deny that)

There are no drivers to use 5.1 surround on usb (add to that fact that often the surround 5.1 is only implemented in software and not an actual feature of the device, don't know if that's the case here), to  fix distortions in low latency ALSA apps (apart from what you already know with the fragment/buffer size (have you actually tested that or not yet, this should be the approach for drivers that don't have timer-based scheduling implemented which usb_audio doesn't)) you can also define a fixed latency which should help with the distortions by using the PULSE_LATENCY_MSEC variable, like so

PULSE_LATENCY_MSEC=30 $program