You are not logged in.

#1 2015-08-21 08:29:14

x1site
Member
Registered: 2013-10-20
Posts: 60

[SOLVED] Can't suspend to ram and to swap

Hello!
Already 3 days I can't suspend my PC.
It is gone to suspend mode, and after some secondes automaticly wake up.
I have this problem in all desktop envirements and even can't suspend through console (systemctl suspend).
What to do?
dmesg:

[26147.047535] PM: Syncing filesystems ... done.
[26147.299309] PM: Preparing system for mem sleep
[26148.823912] Freezing user space processes ... (elapsed 0.001 seconds) done.
[26148.825710] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[26148.826804] PM: Entering mem sleep
[26148.826818] Suspending console(s) (use no_console_suspend to debug)
[26148.827016] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[26148.827103] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[26148.827166] sd 1:0:0:0: [sdb] Stopping disk
[26148.827244] sd 0:0:0:0: [sda] Stopping disk
[26148.827297] parport_pc 00:06: disabled
[26148.827405] serial 00:05: disabled
[26149.247801] PM: suspend of devices complete after 420.871 msecs
[26149.248298] PM: late suspend of devices complete after 0.493 msecs
[26149.248890] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[26149.249052] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[26149.249089] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[26149.261123] PM: noirq suspend of devices complete after 12.821 msecs
[26149.261401] ACPI: Preparing to enter system sleep state S3
[26149.261693] PM: Saving platform NVS memory
[26149.261699] Disabling non-boot CPUs ...
[26149.261745] intel_pstate CPU 1 exiting
[26149.262999] kvm: disabling virtualization on CPU1
[26149.263306] smpboot: CPU 1 is now offline
[26149.263699] intel_pstate CPU 2 exiting
[26149.264913] kvm: disabling virtualization on CPU2
[26149.265228] smpboot: CPU 2 is now offline
[26149.265636] intel_pstate CPU 3 exiting
[26149.266837] kvm: disabling virtualization on CPU3
[26149.266842] smpboot: CPU 3 is now offline
[26149.268250] ACPI: Low-level resume complete
[26149.268288] PM: Restoring platform NVS memory
[26149.268622] Enabling non-boot CPUs ...
[26149.268659] x86: Booting SMP configuration:
[26149.268660] smpboot: Booting Node 0 Processor 1 APIC 0x2
[26149.279737] kvm: enabling virtualization on CPU1
[26149.281895]  cache: parent cpu1 should not be sleeping
[26149.282022] CPU1 is up
[26149.282039] smpboot: Booting Node 0 Processor 2 APIC 0x1
[26149.293105] kvm: enabling virtualization on CPU2
[26149.295259]  cache: parent cpu2 should not be sleeping
[26149.295354] CPU2 is up
[26149.295369] smpboot: Booting Node 0 Processor 3 APIC 0x3
[26149.306442] kvm: enabling virtualization on CPU3
[26149.308604]  cache: parent cpu3 should not be sleeping
[26149.308698] CPU3 is up
[26149.311069] ACPI: Waking up from system sleep state S3
[26149.322488] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[26149.322509] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[26149.322646] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[26149.322724] PM: noirq resume of devices complete after 11.354 msecs
[26149.323012] PM: early resume of devices complete after 0.261 msecs
[26149.323251] rtc_cmos 00:02: System wakeup disabled by ACPI
[26149.323837] serial 00:05: activated
[26149.324123] parport_pc 00:06: activated
[26149.333478] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[26149.333482] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.CHN1.DRV0._GTF] (Node ffff8802160bf000), AE_NOT_FOUND (20150410/psparse-536)
[26149.333494] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[26149.333497] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.CHN1.DRV1._GTF] (Node ffff8802160bf078), AE_NOT_FOUND (20150410/psparse-536)
[26149.333607] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[26149.333610] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.CHN0.DRV0._GTF] (Node ffff8802160abe60), AE_NOT_FOUND (20150410/psparse-536)
[26149.339812] sd 0:0:0:0: [sda] Starting disk
[26149.339815] sd 1:0:0:0: [sdb] Starting disk
[26149.751787] PM: resume of devices complete after 428.772 msecs
[26149.751981] PM: Finishing wakeup.
[26149.751982] Restarting tasks ... 
[26149.753655] pci_bus 0000:05: Allocating resources
[26149.753680] pci 0000:04:00.0: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[26149.753683] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[26149.753686] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[26149.753689] pci 0000:04:00.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[26149.753692] pci 0000:04:00.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[26149.753694] pci 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[26149.753696] pci 0000:04:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[26149.753698] pci 0000:04:00.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[26149.753700] pci 0000:04:00.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[26149.753708] pci 0000:04:00.0: BAR 14: assigned [mem 0xf2100000-0xf22fffff]
[26149.753715] pci 0000:04:00.0: BAR 15: assigned [mem 0xf2300000-0xf24fffff 64bit pref]
[26149.753719] pci 0000:04:00.0: BAR 13: assigned [io  0x1000-0x1fff]
[26149.753722] pci 0000:04:00.0: PCI bridge to [bus 05]
[26149.753726] pci 0000:04:00.0:   bridge window [io  0x1000-0x1fff]
[26149.753735] pci 0000:04:00.0:   bridge window [mem 0xf2100000-0xf22fffff]
[26149.753742] pci 0000:04:00.0:   bridge window [mem 0xf2300000-0xf24fffff 64bit pref]
[26149.758030] done.
[26150.675686] ata1.01: failed to resume link (SControl 30)
[26152.226328] atl1c 0000:03:00.0: atl1c: enp3s0 NIC Link is Up<100 Mbps Full Duplex>
[26152.419052] ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[26152.419068] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[26152.425965] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[26152.425974] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.CHN1.DRV1._GTF] (Node ffff8802160bf078), AE_NOT_FOUND (20150410/psparse-536)
[26152.455921] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[26152.455928] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.CHN1.DRV0._GTF] (Node ffff8802160bf000), AE_NOT_FOUND (20150410/psparse-536)
[26152.482387] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[26152.482401] ata1.01: SATA link down (SStatus 4 SControl 30)
[26152.489303] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[26152.489311] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.CHN0.DRV0._GTF] (Node ffff8802160abe60), AE_NOT_FOUND (20150410/psparse-536)
[26152.596036] ata1.00: configured for UDMA/100
[26152.600181] ata2.00: configured for UDMA/133
[26152.612559] ata2.01: configured for UDMA/100

Last edited by x1site (2015-08-22 06:07:39)


awesome + rofi

Offline

#2 2015-08-21 16:28:01

paulkerry
Member
From: Sheffield, UK
Registered: 2014-10-02
Posts: 611

Re: [SOLVED] Can't suspend to ram and to swap

try installing and using the linux-lts kernel rather than the linux kernel.

Offline

#3 2015-08-22 02:57:07

x1site
Member
Registered: 2013-10-20
Posts: 60

Re: [SOLVED] Can't suspend to ram and to swap

paulkerry wrote:

try installing and using the linux-lts kernel rather than the linux kernel.

I tried, but then sddm not working
without running sddm PC after suspend can't wake up. (it si automatically waked up and then, i see only black screen)

Last edited by x1site (2015-08-22 05:00:48)


awesome + rofi

Offline

#4 2015-08-22 05:54:48

mich41
Member
Registered: 2012-06-22
Posts: 796

Re: [SOLVED] Can't suspend to ram and to swap

Try playing with /proc/acpi/wakeup. It seems that the machine hibernates, but some peripheral device immediately wakes it up.

Offline

#5 2015-08-22 06:07:24

x1site
Member
Registered: 2013-10-20
Posts: 60

Re: [SOLVED] Can't suspend to ram and to swap

It was my keyboard with pressed Fn button by toothpick:)
f1-f12 not working without pressed Fn.


awesome + rofi

Offline

Board footer

Powered by FluxBB