Only lsusb can find WD My Book Essential external HDD.

caellyan · 2015-09-20 14:22:57

My WD My Book Essential (3TB) got currupted when I unplugged it from my friends Windows PC while it was loading.
It's a fairly new drive (~1yo) and I have some data on it I would like to keep if possible. Data on it isn't something I can't live without, but if possible I would like to keep it. It was formatted in NTFS.

Output from "lsusb -v":

Bus 003 Device 002: ID 1058:1140 Western Digital Technologies, Inc. My Book Essential (WDBACW)
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         9
  idVendor           0x1058 Western Digital Technologies, Inc.
  idProduct          0x1140 My Book Essential (WDBACW)
  bcdDevice           10.19
  iManufacturer           1 
  iProduct                2 
  iSerial                 5 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           44
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              6 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15

lsblk doesn't show this drive, and neither does GParted.

If any additional data is needed, just say so and I'll reply ASAP.

Slithery · 2015-09-20 14:27:49

Have you tried plugging it into a Windows machine? In my experience Windows tools have more success in fixing NTFS problems than Linux tools do.

Is there any new output from dmesg when you plug the drive in?

caellyan · 2015-09-20 14:43:14

dmesg output:

When I plug it out this line gets added:

[ 1664.638284] usb 3-1: USB disconnect, device number 2

When I plug it in following lines get added:

[ 1801.523517] usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 1801.546024] usb-storage 6-2:1.0: USB Mass Storage device detected
[ 1801.546313] scsi host10: usb-storage 6-2:1.0
[ 1802.547460] scsi 10:0:0:0: Direct-Access     WD       My Book 1140     1019 PQ: 0 ANSI: 6
[ 1802.547739] scsi 10:0:0:1: Enclosure         WD       SES Device       1019 PQ: 0 ANSI: 6
[ 1802.549944] ses 10:0:0:1: Attached Enclosure device
[ 1802.551302] ses 10:0:0:1: Failed to get diagnostic page 0x8000002
[ 1802.551312] ses 10:0:0:1: Failed to bind enclosure -19
[ 1802.552793] sd 10:0:0:0: [sdc] Unit Not Ready
[ 1802.552803] sd 10:0:0:0: [sdc] Sense Key : 0x4 [current] 
[ 1802.552810] sd 10:0:0:0: [sdc] ASC=0x44 ASCQ=0x0

The whole output looks like this:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.6-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Mon Aug 17 08:52:28 CEST 2015
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bce6908f-0672-4ed2-8435-e40a0c311d95 rw quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ac108fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ac109000-0x00000000ac6f1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ac6f2000-0x00000000ac992fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ac993000-0x00000000acf67fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000acf68000-0x00000000acf68fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000acf69000-0x00000000acfeefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000acfef000-0x00000000ad416fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ad417000-0x00000000ad7f3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ad7f4000-0x00000000ad7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000084fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X79 Extreme3, BIOS P2.30 11/22/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x850000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask 3FF800000000 write-back
[    0.000000]   1 base 000800000000 mask 3FFFC0000000 write-back
[    0.000000]   2 base 000840000000 mask 3FFFF0000000 write-back
[    0.000000]   3 base 0000AE000000 mask 3FFFFE000000 uncachable
[    0.000000]   4 base 0000B0000000 mask 3FFFF0000000 uncachable
[    0.000000]   5 base 0000C0000000 mask 3FFFC0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: update [mem 0xae000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xad800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd960-0x000fd96f] mapped at [ffff8800000fd960]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[    0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[    0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x84fe00000-0x84fffffff]
[    0.000000]  [mem 0x84fe00000-0x84fffffff] page 2M
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x840000000-0x84fdfffff]
[    0.000000]  [mem 0x840000000-0x84fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x820000000-0x83fffffff]
[    0.000000]  [mem 0x820000000-0x83fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xac108fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xabffffff] page 2M
[    0.000000]  [mem 0xac000000-0xac108fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xacf68000-0xacf68fff]
[    0.000000]  [mem 0xacf68000-0xacf68fff] page 4k
[    0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xacfef000-0xad416fff]
[    0.000000]  [mem 0xacfef000-0xacffffff] page 4k
[    0.000000]  [mem 0xad000000-0xad3fffff] page 2M
[    0.000000]  [mem 0xad400000-0xad416fff] page 4k
[    0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xad7f4000-0xad7fffff]
[    0.000000]  [mem 0xad7f4000-0xad7fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x81fffffff]
[    0.000000]  [mem 0x100000000-0x81fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x3792a000-0x37c8cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000AC913080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000AC91B630 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000AC9131A0 008490 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000AC990F80 000040
[    0.000000] ACPI: APIC 0x00000000AC91B728 000100 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000AC91B828 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000AC91B870 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
[    0.000000] ACPI: AAFT 0x00000000AC91B8B0 0000BA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000AC91B970 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000AC91B9A8 06E284 (v02 INTEL  CpuPm    00004000 INTL 20051117)
[    0.000000] ACPI: EINJ 0x00000000AC989C30 000130 (v01 AMI    AMI EINJ 00000000      00000000)
[    0.000000] ACPI: ERST 0x00000000AC989D60 000210 (v01 AMIER  AMI ERST 00000000      00000000)
[    0.000000] ACPI: HEST 0x00000000AC989F70 0000A8 (v01 AMI    AMI HEST 00000000      00000000)
[    0.000000] ACPI: BERT 0x00000000AC98A018 000030 (v01 AMI    AMI BERT 00000000      00000000)
[    0.000000] ACPI: BGRT 0x00000000AC98A048 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000084fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x84fff9000-0x84fffcfff]
[    0.000000]  [ffffea0000000000-ffffea00213fffff] PMD -> [ffff88082f600000-ffff88084f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000084fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ac108fff]
[    0.000000]   node   0: [mem 0x00000000acf68000-0x00000000acf68fff]
[    0.000000]   node   0: [mem 0x00000000acfef000-0x00000000ad416fff]
[    0.000000]   node   0: [mem 0x00000000ad7f4000-0x00000000ad7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000084fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000084fffffff]
[    0.000000] On node 0 totalpages: 8373467
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10965 pages used for memmap
[    0.000000]   DMA32 zone: 701758 pages, LIFO batch:31
[    0.000000]   Normal zone: 119808 pages used for memmap
[    0.000000]   Normal zone: 7667712 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xac109000-0xac6f1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xac6f2000-0xac992fff]
[    0.000000] PM: Registered nosave memory: [mem 0xac993000-0xacf67fff]
[    0.000000] PM: Registered nosave memory: [mem 0xacf69000-0xacfeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xad417000-0xad7f3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xad800000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xad800000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:12 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88082f200000 s95576 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s95576 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 8242609
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bce6908f-0672-4ed2-8435-e40a0c311d95 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 32886628K/33493868K available (5699K kernel code, 893K rwdata, 1732K rodata, 1180K init, 1152K bss, 607240K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=12.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[    0.000000] NR_IRQS:8448 nr_irqs:928 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3199.890 MHz processor
[    0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.43 BogoMIPS (lpj=10666300)
[    0.000030] pid_max: default: 32768 minimum: 301
[    0.000035] ACPI: Core revision 20150410
[    0.021472] ACPI: All ACPI Tables successfully acquired
[    0.021492] Security Framework initialized
[    0.021496] Yama: becoming mindful.
[    0.023025] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.027943] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.030029] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.030057] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.030304] Initializing cgroup subsys blkio
[    0.030306] Initializing cgroup subsys memory
[    0.030312] Initializing cgroup subsys devices
[    0.030314] Initializing cgroup subsys freezer
[    0.030315] Initializing cgroup subsys net_cls
[    0.030334] CPU: Physical Processor ID: 0
[    0.030335] CPU: Processor Core ID: 0
[    0.030340] mce: CPU supports 18 MCE banks
[    0.030360] CPU0: Thermal monitoring enabled (TM1)
[    0.030374] process: using mwait in idle threads
[    0.030376] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.030377] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.030482] Freeing SMP alternatives memory: 20K (ffffffff81a08000 - ffffffff81a0d000)
[    0.035423] ftrace: allocating 21563 entries in 85 pages
[    0.044050] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.044094] Switched APIC routing to physical flat.
[    0.044580] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.077584] TSC deadline timer enabled
[    0.077586] smpboot: CPU0: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (fam: 06, model: 2d, stepping: 07)
[    0.077604] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.077621] ... version:                3
[    0.077621] ... bit width:              48
[    0.077622] ... generic registers:      4
[    0.077623] ... value mask:             0000ffffffffffff
[    0.077624] ... max period:             0000ffffffffffff
[    0.077624] ... fixed-purpose events:   3
[    0.077625] ... event mask:             000000070000000f
[    0.101018] x86: Booting SMP configuration:
[    0.101019] .... node  #0, CPUs:        #1
[    0.114242] TSC synchronization [CPU#0 -> CPU#1]:
[    0.114245] Measured 34888816356286 cycles TSC warp between CPUs, turning off TSC clock.
[    0.114249] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.114385] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.121041]   #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.271306] x86: Booted up 1 node, 12 CPUs
[    0.271309] smpboot: Total of 12 processors activated (76828.25 BogoMIPS)
[    0.273462] devtmpfs: initialized
[    0.277628] PM: Registering ACPI NVS region [mem 0xac6f2000-0xac992fff] (2756608 bytes)
[    0.277628] PM: Registering ACPI NVS region [mem 0xacf69000-0xacfeefff] (548864 bytes)
[    0.277628] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.277628] pinctrl core: initialized pinctrl subsystem
[    0.277628] RTC time: 14:06:36, date: 09/20/15
[    0.277899] NET: Registered protocol family 16
[    0.290008] cpuidle: using governor ladder
[    0.303338] cpuidle: using governor menu
[    0.303397] ACPI: bus type PCI registered
[    0.303399] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.303452] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.303454] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.303715] PCI: Using configuration type 1 for base access
[    0.304249] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.316736] ACPI: Added _OSI(Module Device)
[    0.316736] ACPI: Added _OSI(Processor Device)
[    0.316736] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.316736] ACPI: Added _OSI(Processor Aggregator Device)
[    0.324025] ACPI: Executed 1 blocks of module-level executable AML code
[    0.370017] \_SB_:_OSC invalid UUID
[    0.370019] _OSC request data:1 1f 
[    0.371175] ACPI: Interpreter enabled
[    0.371179] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.371182] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.371192] ACPI: (supports S0 S3 S4 S5)
[    0.371193] ACPI: Using IOAPIC for interrupt routing
[    0.371239] HEST: Table parsing has been initialized.
[    0.371241] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.375160] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.379593] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.379598] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.379695] acpi PNP0A08:00: _OSC: platform does not support [PME AER]
[    0.379782] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
[    0.379980] PCI host bridge to bus 0000:00
[    0.379982] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.379984] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.379985] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.379986] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.379988] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.379989] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.379990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.379992] pci_bus 0000:00: root bus resource [mem 0xbc000000-0xfbffffff window]
[    0.380002] pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
[    0.380058] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.380120] pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
[    0.380180] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.380216] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.380255] pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
[    0.380314] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.380349] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.380384] pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
[    0.380442] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.380477] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.380510] pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
[    0.380605] pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
[    0.380696] pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
[    0.380706] pci 0000:00:05.4: reg 0x10: [mem 0xfbf09000-0xfbf09fff]
[    0.380807] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
[    0.380881] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[    0.380948] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
[    0.380967] pci 0000:00:16.0: reg 0x10: [mem 0xfbf08000-0xfbf0800f 64bit]
[    0.381032] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.381097] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
[    0.381113] pci 0000:00:1a.0: reg 0x10: [mem 0xfbf07000-0xfbf073ff]
[    0.381185] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.381217] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.381249] pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
[    0.381263] pci 0000:00:1b.0: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit]
[    0.381324] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.381382] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
[    0.381446] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.381480] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.381511] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
[    0.381574] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.381608] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.381638] pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
[    0.381701] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.381735] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.381765] pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
[    0.381829] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.381864] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.381895] pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
[    0.381958] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.381992] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.382025] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
[    0.382040] pci 0000:00:1d.0: reg 0x10: [mem 0xfbf06000-0xfbf063ff]
[    0.382112] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.382145] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.382172] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.382240] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.382270] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
[    0.382414] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
[    0.382427] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.382434] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.382441] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.382447] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.382454] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.382460] pci 0000:00:1f.2: reg 0x24: [mem 0xfbf05000-0xfbf057ff]
[    0.382492] pci 0000:00:1f.2: PME# supported from D3hot
[    0.382547] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
[    0.382560] pci 0000:00:1f.3: reg 0x10: [mem 0xfbf04000-0xfbf040ff 64bit]
[    0.382578] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.382677] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.382720] pci 0000:02:00.0: [1002:6798] type 00 class 0x030000
[    0.382730] pci 0000:02:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.382737] pci 0000:02:00.0: reg 0x18: [mem 0xfbe00000-0xfbe3ffff 64bit]
[    0.382742] pci 0000:02:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.382751] pci 0000:02:00.0: reg 0x30: [mem 0xfbe40000-0xfbe5ffff pref]
[    0.382779] pci 0000:02:00.0: supports D1 D2
[    0.382780] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[    0.382821] pci 0000:02:00.1: [1002:aaa0] type 00 class 0x040300
[    0.382831] pci 0000:02:00.1: reg 0x10: [mem 0xfbe60000-0xfbe63fff 64bit]
[    0.382871] pci 0000:02:00.1: supports D1 D2
[    0.386690] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.386697] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.386703] pci 0000:00:02.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.386711] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.386757] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.386805] pci 0000:00:11.0: PCI bridge to [bus 04]
[    0.386850] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.386911] pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601
[    0.386932] pci 0000:06:00.0: reg 0x10: [io  0xd050-0xd057]
[    0.386945] pci 0000:06:00.0: reg 0x14: [io  0xd040-0xd043]
[    0.386957] pci 0000:06:00.0: reg 0x18: [io  0xd030-0xd037]
[    0.386970] pci 0000:06:00.0: reg 0x1c: [io  0xd020-0xd023]
[    0.386982] pci 0000:06:00.0: reg 0x20: [io  0xd000-0xd01f]
[    0.386995] pci 0000:06:00.0: reg 0x24: [mem 0xfbd00000-0xfbd001ff]
[    0.393355] pci 0000:00:1c.1: PCI bridge to [bus 06]
[    0.393361] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.393367] pci 0000:00:1c.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.393442] pci 0000:07:00.0: [1b6f:7023] type 00 class 0x0c0330
[    0.393470] pci 0000:07:00.0: reg 0x10: [mem 0xfbc00000-0xfbc07fff 64bit]
[    0.393587] pci 0000:07:00.0: supports D1 D2
[    0.393588] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.400023] pci 0000:00:1c.2: PCI bridge to [bus 07]
[    0.400032] pci 0000:00:1c.2:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.400110] pci 0000:08:00.0: [14e4:16b1] type 00 class 0x020000
[    0.400140] pci 0000:08:00.0: reg 0x10: [mem 0xd0010000-0xd001ffff 64bit pref]
[    0.400162] pci 0000:08:00.0: reg 0x18: [mem 0xd0000000-0xd000ffff 64bit pref]
[    0.400201] pci 0000:08:00.0: reg 0x30: [mem 0xfbb00000-0xfbb007ff pref]
[    0.400291] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    0.406690] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    0.406699] pci 0000:00:1c.3:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.406708] pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.406776] pci 0000:09:00.0: [1b6f:7023] type 00 class 0x0c0330
[    0.406804] pci 0000:09:00.0: reg 0x10: [mem 0xfba00000-0xfba07fff 64bit]
[    0.406920] pci 0000:09:00.0: supports D1 D2
[    0.406922] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.413356] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.413365] pci 0000:00:1c.5:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.413445] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[    0.413453] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.413455] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.413456] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.413457] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.413459] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.413460] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.413461] pci 0000:00:1e.0:   bridge window [mem 0xbc000000-0xfbffffff window] (subtractive decode)
[    0.413911] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
[    0.413914] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.413917] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.413954] PCI host bridge to bus 0000:ff
[    0.413956] pci_bus 0000:ff: root bus resource [bus ff]
[    0.413963] pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
[    0.414008] pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
[    0.414057] pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
[    0.414111] pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
[    0.414154] pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
[    0.414203] pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
[    0.414256] pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
[    0.414293] pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
[    0.414328] pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
[    0.414364] pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
[    0.414400] pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
[    0.414435] pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
[    0.414470] pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
[    0.414504] pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
[    0.414539] pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
[    0.414574] pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
[    0.414609] pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
[    0.414644] pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
[    0.414678] pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
[    0.414712] pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
[    0.414748] pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
[    0.414782] pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
[    0.414819] pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
[    0.414860] pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
[    0.414906] pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
[    0.414952] pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
[    0.414997] pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
[    0.415042] pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
[    0.415088] pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
[    0.415131] pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
[    0.415171] pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
[    0.415218] pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
[    0.415263] pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
[    0.415309] pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
[    0.415354] pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
[    0.415400] pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
[    0.415445] pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
[    0.415490] pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
[    0.415535] pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
[    0.415577] pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
[    0.415611] pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
[    0.415648] pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
[    0.415682] pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
[    0.415717] pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
[    0.415816] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.415849] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.415882] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.415914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.415946] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.415978] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.416010] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.416042] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.416660] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.416723] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.416723] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.416723] vgaarb: loaded
[    0.416723] vgaarb: bridge control possible 0000:02:00.0
[    0.416724] PCI: Using ACPI for IRQ routing
[    0.422467] PCI: pci_cache_line_size set to 64 bytes
[    0.422559] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.422560] e820: reserve RAM buffer [mem 0xac109000-0xafffffff]
[    0.422561] e820: reserve RAM buffer [mem 0xacf69000-0xafffffff]
[    0.422562] e820: reserve RAM buffer [mem 0xad417000-0xafffffff]
[    0.422563] e820: reserve RAM buffer [mem 0xad800000-0xafffffff]
[    0.422654] NetLabel: Initializing
[    0.422655] NetLabel:  domain hash size = 128
[    0.422656] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.422666] NetLabel:  unlabeled traffic allowed by default
[    0.422683] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.422687] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.424362] Switched to clocksource hpet
[    0.427392] pnp: PnP ACPI init
[    0.427471] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.427473] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.427476] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
[    0.427477] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.427479] system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
[    0.427480] system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
[    0.427482] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.427485] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.427557] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.427559] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.427709] pnp 00:02: [dma 0 disabled]
[    0.427747] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.427868] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.427915] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.427917] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.428052] system 00:05: [io  0x0400-0x0453] could not be reserved
[    0.428054] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.428056] system 00:05: [io  0x1180-0x119f] has been reserved
[    0.428057] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.428059] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.428060] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.428062] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.428063] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.428065] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.428116] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.428118] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.428431] pnp: PnP ACPI: found 7 devices
[    0.434534] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.434599] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.434608] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.434610] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.434614] pci 0000:00:02.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.434616] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.434621] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.434628] pci 0000:00:11.0: PCI bridge to [bus 04]
[    0.434639] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.434649] pci 0000:00:1c.1: PCI bridge to [bus 06]
[    0.434651] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.434655] pci 0000:00:1c.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.434662] pci 0000:00:1c.2: PCI bridge to [bus 07]
[    0.434666] pci 0000:00:1c.2:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.434673] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    0.434677] pci 0000:00:1c.3:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.434680] pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.434685] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.434689] pci 0000:00:1c.5:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.434696] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[    0.434705] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.434706] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.434707] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.434709] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.434710] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.434711] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.434713] pci_bus 0000:00: resource 10 [mem 0xbc000000-0xfbffffff window]
[    0.434714] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.434716] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.434717] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.434718] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    0.434720] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.434721] pci_bus 0000:07: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.434722] pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.434724] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.434725] pci_bus 0000:09: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.434726] pci_bus 0000:0a: resource 4 [io  0x0000-0x03af window]
[    0.434728] pci_bus 0000:0a: resource 5 [io  0x03e0-0x0cf7 window]
[    0.434729] pci_bus 0000:0a: resource 6 [io  0x03b0-0x03df window]
[    0.434730] pci_bus 0000:0a: resource 7 [io  0x0d00-0xffff window]
[    0.434731] pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.434733] pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.434734] pci_bus 0000:0a: resource 10 [mem 0xbc000000-0xfbffffff window]
[    0.434762] NET: Registered protocol family 2
[    0.434983] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.435321] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.435431] TCP: Hash tables configured (established 262144 bind 65536)
[    0.435478] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    0.435567] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    0.435672] NET: Registered protocol family 1
[    0.470107] pci 0000:02:00.0: Video device with shadowed ROM
[    0.470352] PCI: CLS 64 bytes, default 64
[    0.470393] Unpacking initramfs...
[    0.514669] Freeing initrd memory: 3468K (ffff88003792a000 - ffff880037c8d000)
[    0.514677] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.514679] software IO TLB [mem 0xa8109000-0xac109000] (64MB) mapped at [ffff8800a8109000-ffff8800ac108fff]
[    0.514716] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2e1fe2554e1, max_idle_ns: 440795304248 ns
[    0.514725] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.514726] hw unit of domain pp0-core 2^-16 Joules
[    0.514727] hw unit of domain package 2^-16 Joules
[    0.514728] hw unit of domain dram 2^-16 Joules
[    0.514981] microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x70c
[    0.514987] microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x70c
[    0.514994] microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x70c
[    0.515001] microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x70c
[    0.515009] microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x70c
[    0.515016] microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x70c
[    0.515022] microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x70c
[    0.515029] microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x70c
[    0.515034] microcode: CPU8 sig=0x206d7, pf=0x4, revision=0x70c
[    0.515040] microcode: CPU9 sig=0x206d7, pf=0x4, revision=0x70c
[    0.515046] microcode: CPU10 sig=0x206d7, pf=0x4, revision=0x70c
[    0.515051] microcode: CPU11 sig=0x206d7, pf=0x4, revision=0x70c
[    0.515091] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.515112] Scanning for low memory corruption every 60 seconds
[    0.515390] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.515423] Initialise system trusted keyring
[    0.515919] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.517034] zpool: loaded
[    0.517037] zbud: loaded
[    0.517168] VFS: Disk quotas dquot_6.6.0
[    0.517198] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.517321] Key type big_key registered
[    0.517510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.517573] io scheduler noop registered
[    0.517575] io scheduler deadline registered
[    0.517598] io scheduler cfq registered (default)
[    0.518376] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.518389] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.518399] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    0.518400] vesafb: scrolling: redraw
[    0.518401] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.518416] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90003800000, using 5824k, total 5824k
[    0.620899] Console: switching to colour frame buffer device 175x65
[    0.722813] fb0: VESA VGA frame buffer device
[    0.722826] intel_idle: MWAIT substates: 0x21120
[    0.722827] intel_idle: v0.4 model 0x2D
[    0.722828] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.723216] ERST: Error Record Serialization Table (ERST) support is initialized.
[    0.723219] pstore: Registered erst as persistent store backend
[    0.723264] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[    0.723316] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.743866] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.744166] Linux agpgart interface v0.103
[    0.744827] rtc_cmos 00:03: RTC can wake from S4
[    0.744940] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.744967] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.744976] Intel P-state driver initializing.
[    0.745184] ledtrig-cpu: registered to indicate activity on CPUs
[    0.745786] NET: Registered protocol family 10
[    0.746203] NET: Registered protocol family 17
[    0.747356] Loading compiled-in X.509 certificates
[    0.747380] registered taskstats version 1
[    0.748490]   Magic number: 15:71:132
[    0.748562] acpi device:07: hash matches
[    0.748726] rtc_cmos 00:03: setting system clock to 2015-09-20 14:06:36 UTC (1442757996)
[    0.748868] PM: Hibernation image not present or could not be loaded.
[    0.749607] Freeing unused kernel memory: 1180K (ffffffff818e1000 - ffffffff81a08000)
[    0.749610] Write protecting the kernel read-only data: 8192k
[    0.750234] Freeing unused kernel memory: 432K (ffff880001594000 - ffff880001600000)
[    0.750497] Freeing unused kernel memory: 316K (ffff8800017b1000 - ffff880001800000)
[    0.762539] random: systemd-tmpfile urandom read with 1 bits of entropy available
[    0.831586] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.834253] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.834309] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.839659] ACPI: bus type USB registered
[    0.839686] usbcore: registered new interface driver usbfs
[    0.839697] usbcore: registered new interface driver hub
[    0.839754] usbcore: registered new device driver usb
[    0.840520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.840630] SCSI subsystem initialized
[    0.840960] ehci-pci: EHCI PCI platform driver
[    0.841149] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.841156] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.841169] ehci-pci 0000:00:1a.0: debug port 2
[    0.842446] libata version 3.00 loaded.
[    0.845071] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.845087] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf07000
[    0.853376] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.853598] hub 1-0:1.0: USB hub found
[    0.853611] hub 1-0:1.0: 2 ports detected
[    0.853783] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    0.853796] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 2
[    0.853918] xhci_hcd 0000:07:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[    0.854205] hub 2-0:1.0: USB hub found
[    0.854215] hub 2-0:1.0: 2 ports detected
[    0.854338] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    0.854342] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
[    0.854357] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.854363] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.854503] hub 3-0:1.0: USB hub found
[    0.854513] hub 3-0:1.0: 2 ports detected
[    0.854640] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.854659] ehci-pci 0000:00:1d.0: debug port 2
[    0.858557] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.858575] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf06000
[    0.866698] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.866898] hub 4-0:1.0: USB hub found
[    0.866905] hub 4-0:1.0: 2 ports detected
[    0.867054] xhci_hcd 0000:09:00.0: xHCI Host Controller
[    0.867060] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 5
[    0.867065] ahci 0000:00:1f.2: version 3.0
[    0.867211] xhci_hcd 0000:09:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[    0.867363] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.867367] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    0.867499] hub 5-0:1.0: USB hub found
[    0.867509] hub 5-0:1.0: 2 ports detected
[    0.867615] xhci_hcd 0000:09:00.0: xHCI Host Controller
[    0.867618] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 6
[    0.867634] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.867760] hub 6-0:1.0: USB hub found
[    0.867770] hub 6-0:1.0: 2 ports detected
[    0.900556] scsi host0: ahci
[    0.900738] scsi host1: ahci
[    0.900879] scsi host2: ahci
[    0.901019] scsi host3: ahci
[    0.901136] scsi host4: ahci
[    0.901221] scsi host5: ahci
[    0.901253] ata1: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05100 irq 29
[    0.901254] ata2: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05180 irq 29
[    0.901256] ata3: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05200 irq 29
[    0.901258] ata4: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05280 irq 29
[    0.901259] ata5: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05300 irq 29
[    0.901261] ata6: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05380 irq 29
[    0.901365] ahci 0000:06:00.0: SSS flag set, parallel bus scan disabled
[    0.901410] ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.901412] ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    0.901635] scsi host6: ahci
[    0.901725] scsi host7: ahci
[    0.901757] ata7: SATA max UDMA/133 abar m512@0xfbd00000 port 0xfbd00100 irq 30
[    0.901759] ata8: SATA max UDMA/133 abar m512@0xfbd00000 port 0xfbd00180 irq 30
[    1.160073] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.173395] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.180303] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.204777] usb-storage 3-1:1.0: USB Mass Storage device detected
[    1.205126] scsi host8: usb-storage 3-1:1.0
[    1.205273] usbcore: registered new interface driver usb-storage
[    1.205736] usbcore: registered new interface driver uas
[    1.220060] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.220093] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.220096] ata7: SATA link down (SStatus 0 SControl 300)
[    1.220132] ata5: SATA link down (SStatus 0 SControl 300)
[    1.220158] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.220185] ata6: SATA link down (SStatus 0 SControl 300)
[    1.220210] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.220904] ata2.00: HPA detected: current 625140335, native 625142448
[    1.221025] ata2.00: ATA-8: WDC WD3200AAJS-00L7A0, 01.03E01, max UDMA/133
[    1.221028] ata2.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.222052] ata3.00: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
[    1.222541] ata1.00: ATA-8: WDC WD7500AALX-009BA0, 15.01H15, max UDMA/133
[    1.222548] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.222753] ata2.00: configured for UDMA/133
[    1.222851] ata3.00: configured for UDMA/100
[    1.223043] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[    1.224005] ata1.00: configured for UDMA/133
[    1.224213] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500AALX-0 1H15 PQ: 0 ANSI: 5
[    1.224710] scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 3E01 PQ: 0 ANSI: 5
[    1.225737] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222BB  SB00 PQ: 0 ANSI: 5
[    1.227037] ata4.00: configured for UDMA/100
[    1.239058] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL02 PQ: 0 ANSI: 5
[    1.284253] hub 1-1:1.0: USB hub found
[    1.284387] hub 1-1:1.0: 6 ports detected
[    1.297392] hub 4-1:1.0: USB hub found
[    1.297547] hub 4-1:1.0: 8 ports detected
[    1.550059] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.563419] usb 4-1.1: new low-speed USB device number 3 using ehci-pci
[    1.566745] ata8: SATA link down (SStatus 0 SControl 300)
[    1.570992] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    1.571028] sd 1:0:0:0: [sdb] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[    1.571037] sd 0:0:0:0: [sda] Write Protect is off
[    1.571040] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.571054] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.571186] sd 1:0:0:0: [sdb] Write Protect is off
[    1.571190] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.571240] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.583733] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.583735] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.583871] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.599968]  sdb: sdb1 sdb2 sdb3
[    1.600389] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.600488] sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.600579] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    1.619665]  sda: sda1 < sda5 sda6 sda7 sda8 > sda2
[    1.620101] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.652444] hidraw: raw HID events driver (C) Jiri Kosina
[    1.654571] usbcore: registered new interface driver usbhid
[    1.654573] usbhid: USB HID core driver
[    1.655099] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:093A:2510.0001/input/input2
[    1.655137] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[    1.700012] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    1.716686] usb 4-1.2: new low-speed USB device number 4 using ehci-pci
[    1.785400] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    1.785494] scsi host9: usb-storage 1-1.2:1.0
[    1.810779] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:046D:C31C.0002/input/input3
[    1.863446] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[    1.870159] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.1/0003:046D:C31C.0003/input/input4
[    1.923442] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.2/input1
[    2.164611] random: nonblocking pool is initialized
[    2.207503] scsi 8:0:0:0: Direct-Access     WD       My Book 1140     1019 PQ: 0 ANSI: 6
[    2.207681] scsi 8:0:0:1: Enclosure         WD       SES Device       1019 PQ: 0 ANSI: 6
[    2.211286] sd 8:0:0:0: [sdc] Unit Not Ready
[    2.211289] sd 8:0:0:0: [sdc] Sense Key : 0x4 [current] 
[    2.211291] sd 8:0:0:0: [sdc] ASC=0x44 ASCQ=0x0 
[    2.466080] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    3.074218] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.086037] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[    3.086241] systemd[1]: Detected architecture x86-64.
[    3.094606] systemd[1]: Set hostname to <localhost.caellian>.
[    3.443574] scsi 9:0:0:0: Direct-Access     Kingston DT microDuo      1100 PQ: 0 ANSI: 4
[    3.444575] sd 9:0:0:0: [sdd] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
[    3.445295] sd 9:0:0:0: [sdd] Write Protect is off
[    3.445300] sd 9:0:0:0: [sdd] Mode Sense: 43 00 00 00
[    3.446085] sd 9:0:0:0: [sdd] No Caching mode page found
[    3.447042] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[    3.452047]  sdd: sdd1
[    3.454641] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[    3.671038] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.671121] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.671308] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.671342] systemd[1]: Reached target Login Prompts.
[    3.671359] systemd[1]: Reached target Remote File Systems.
[    3.671375] systemd[1]: Reached target Encrypted Volumes.
[    3.671390] systemd[1]: Reached target Paths.
[    3.671660] systemd[1]: Created slice Root Slice.
[    3.671732] systemd[1]: Listening on Journal Socket.
[    3.671787] systemd[1]: Listening on udev Control Socket.
[    3.671825] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.671869] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.671903] systemd[1]: Listening on udev Kernel Socket.
[    3.672055] systemd[1]: Created slice System Slice.
[    3.672211] systemd[1]: Created slice system-dhcpcd.slice.
[    3.672357] systemd[1]: Created slice system-getty.slice.
[    3.673515] systemd[1]: Mounting Configuration File System...
[    3.673897] systemd[1]: Mounting Debug File System...
[    3.674534] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.675096] systemd[1]: Starting Apply Kernel Variables...
[    3.675708] systemd[1]: Mounting Huge Pages File System...
[    3.676780] systemd[1]: Starting Setup Virtual Console...
[    3.707994] systemd[1]: Mounting Temporary Directory...
[    3.708041] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.708148] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.745025] systemd[1]: Starting Journal Service...
[    3.745081] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.745590] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.746043] systemd[1]: Mounting POSIX Message Queue File System...
[    3.746161] systemd[1]: Created slice User and Session Slice.
[    3.746187] systemd[1]: Reached target Slices.
[    3.786055] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.829268] EXT4-fs (sda8): re-mounted. Opts: data=ordered
[    3.829806] systemd[1]: Mounted Huge Pages File System.
[    3.829841] systemd[1]: Mounted POSIX Message Queue File System.
[    3.829862] systemd[1]: Mounted Debug File System.
[    3.829880] systemd[1]: Mounted Configuration File System.
[    3.830769] systemd[1]: Started Remount Root and Kernel File Systems.
[    3.840243] systemd[1]: Mounted Temporary Directory.
[    3.841521] systemd[1]: Starting udev Coldplug all Devices...
[    3.842156] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.056100] systemd[1]: Started Journal Service.
[    4.476509] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    4.476514] ACPI: Power Button [PWRB]
[    4.476599] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    4.476601] ACPI: Power Button [PWRF]
[    4.557139] wmi: Mapper loaded
[    4.687348] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.688953] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    4.693192] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    4.787852] iTCO_vendor_support: vendor-support=0
[    4.808127] EDAC MC: Ver: 3.0.0
[    4.808936] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[    4.808944] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[    4.808947] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[    4.808951] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[    4.808953] EDAC sbridge: Seeking for: PCI ID 8086:3c71
[    4.808957] EDAC sbridge: Seeking for: PCI ID 8086:3c71
[    4.808959] EDAC sbridge: Seeking for: PCI ID 8086:3caa
[    4.808963] EDAC sbridge: Seeking for: PCI ID 8086:3caa
[    4.808965] EDAC sbridge: Seeking for: PCI ID 8086:3cab
[    4.808969] EDAC sbridge: Seeking for: PCI ID 8086:3cab
[    4.808971] EDAC sbridge: Seeking for: PCI ID 8086:3cac
[    4.808975] EDAC sbridge: Seeking for: PCI ID 8086:3cac
[    4.808976] EDAC sbridge: Seeking for: PCI ID 8086:3cad
[    4.808981] EDAC sbridge: Seeking for: PCI ID 8086:3cad
[    4.808982] EDAC sbridge: Seeking for: PCI ID 8086:3cb8
[    4.808987] EDAC sbridge: Seeking for: PCI ID 8086:3cb8
[    4.808988] EDAC sbridge: Seeking for: PCI ID 8086:3cf4
[    4.808992] EDAC sbridge: Seeking for: PCI ID 8086:3cf4
[    4.808994] EDAC sbridge: Seeking for: PCI ID 8086:3cf6
[    4.808997] EDAC sbridge: Seeking for: PCI ID 8086:3cf6
[    4.809000] EDAC sbridge: Seeking for: PCI ID 8086:3cf5
[    4.809004] EDAC sbridge: Seeking for: PCI ID 8086:3cf5
[    4.809008] EDAC sbridge: ECC is disabled. Aborting
[    4.809509] EDAC sbridge: Couldn't find mci handler
[    4.810122] AVX version of gcm_enc/dec engaged.
[    4.810124] AES CTR mode by8 optimization enabled
[    4.843876] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.843904] iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
[    4.843992] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.878931] pps_core: LinuxPPS API ver. 1 registered
[    4.878932] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.879590] PTP clock support registered
[    4.893013] [drm] Initialized drm 1.1.0 20060810
[    4.955234] [drm] radeon kernel modesetting enabled.
[    4.971183] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[    4.971185] snd_hda_intel 0000:02:00.1: Force to non-snoop mode
[    4.980106] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input9
[    4.980155] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input10
[    4.980199] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input11
[    4.980243] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input12
[    4.980287] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input13
[    4.980331] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input14
[    5.006846] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.006848] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.006850] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.006851] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.006852] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    5.006853] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.006855] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    5.006856] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    5.006857] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    5.022437] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    5.022488] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    5.022532] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    5.022576] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    5.022619] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    5.022661] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    5.022703] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    5.022746] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    5.070813] tg3.c:v3.137 (May 11, 2014)
[    5.101316] mousedev: PS/2 mouse device common for all mice
[    5.114551] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    5.114553] AMD IOMMUv2 functionality not available on this system
[    5.117431] tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:0c:ad:08
[    5.117434] tg3 0000:08:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    5.117436] tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    5.117437] tg3 0000:08:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[    5.155671] CRAT table not found
[    5.155673] Finished initializing topology ret=0
[    5.155742] kfd kfd: Initialized module
[    5.155989] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
[    5.155991] fb: switching to radeondrmfb from VESA VGA
[    5.156013] Console: switching to colour dummy device 80x25
[    5.156316] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x1002:0x0B00).
[    5.156327] [drm] register mmio base: 0xFBE00000
[    5.156328] [drm] register mmio size: 262144
[    5.156363] ATOM BIOS: Tahiti
[    5.156401] [drm] Changing default dispclk from 500Mhz to 600Mhz
[    5.156413] radeon 0000:02:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
[    5.156415] radeon 0000:02:00.0: GTT: 1024M 0x00000000C0000000 - 0x00000000FFFFFFFF
[    5.156416] [drm] Detected VRAM RAM=3072M, BAR=256M
[    5.156417] [drm] RAM width 384bits DDR
[    5.156459] [TTM] Zone  kernel: Available graphics memory: 16446022 kiB
[    5.156460] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    5.156461] [TTM] Initializing pool allocator
[    5.156464] [TTM] Initializing DMA pool allocator
[    5.156480] [drm] radeon: 3072M of VRAM memory ready
[    5.156481] [drm] radeon: 1024M of GTT memory ready.
[    5.156487] [drm] Loading tahiti Microcode
[    5.273302] tg3 0000:08:00.0 enp8s0: renamed from eth0
[    5.395318] [drm] Internal thermal controller with fan control
[    5.395376] [drm] probing gen 2 caps for device 8086:3c04 = 7a7902/e
[    5.400928] [drm] radeon: dpm initialized
[    5.448705] scsi 8:0:0:1: Failed to get diagnostic page 0x8000002
[    5.448711] scsi 8:0:0:1: Failed to bind enclosure -19
[    5.448714] sd 9:0:0:0: Embedded Enclosure Device
[    5.449506] sd 9:0:0:0: Failed to get diagnostic page 0x8000002
[    5.449508] sd 9:0:0:0: Failed to bind enclosure -19
[    5.449524] ses 8:0:0:1: Attached Enclosure device
[    5.609849] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    5.610513] [drm] probing gen 2 caps for device 8086:3c04 = 7a7902/e
[    5.610515] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[    5.729991] Adding 1048572k swap on /dev/sda5.  Priority:-1 extents:1 across:1048572k FS
[    5.987597] intel_rapl: Found RAPL domain package
[    5.987600] intel_rapl: Found RAPL domain core
[    6.307660] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered
[    6.443001] systemd-journald[236]: Received request to flush runtime journal from PID 1
[    6.829463] [drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
[    6.829567] radeon 0000:02:00.0: WB enabled
[    6.829570] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff880821a2ec00
[    6.829571] radeon 0000:02:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff880821a2ec04
[    6.829572] radeon 0000:02:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff880821a2ec08
[    6.829573] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff880821a2ec0c
[    6.829574] radeon 0000:02:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff880821a2ec10
[    6.830039] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90006c35a18
[    6.830040] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.830041] [drm] Driver supports precise vblank timestamp query.
[    6.830042] radeon 0000:02:00.0: radeon: MSI limited to 32-bit
[    6.830080] radeon 0000:02:00.0: radeon: using MSI.
[    6.830098] [drm] radeon: irq initialized.
[    6.984059] [drm] ring test on 0 succeeded in 1 usecs
[    6.984063] [drm] ring test on 1 succeeded in 1 usecs
[    6.984066] [drm] ring test on 2 succeeded in 1 usecs
[    6.984073] [drm] ring test on 3 succeeded in 3 usecs
[    6.984078] [drm] ring test on 4 succeeded in 3 usecs
[    7.000681] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[    7.161182] [drm] ring test on 5 succeeded in 1 usecs
[    7.161186] [drm] UVD initialized successfully.
[    7.161360] [drm] ib test on ring 0 succeeded in 0 usecs
[    7.161386] [drm] ib test on ring 1 succeeded in 0 usecs
[    7.161410] [drm] ib test on ring 2 succeeded in 0 usecs
[    7.161427] [drm] ib test on ring 3 succeeded in 0 usecs
[    7.161444] [drm] ib test on ring 4 succeeded in 0 usecs
[    7.810156] [drm] ib test on ring 5 succeeded
[    7.811416] [drm] Radeon Display Connectors
[    7.811419] [drm] Connector 0:
[    7.811420] [drm]   DP-1
[    7.811421] [drm]   HPD5
[    7.811423] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    7.811425] [drm]   Encoders:
[    7.811426] [drm]     DFP1: INTERNAL_UNIPHY2
[    7.811427] [drm] Connector 1:
[    7.811428] [drm]   DP-2
[    7.811429] [drm]   HPD4
[    7.811431] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    7.811432] [drm]   Encoders:
[    7.811433] [drm]     DFP2: INTERNAL_UNIPHY2
[    7.811434] [drm] Connector 2:
[    7.811435] [drm]   HDMI-A-1
[    7.811436] [drm]   HPD1
[    7.811438] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[    7.811439] [drm]   Encoders:
[    7.811440] [drm]     DFP3: INTERNAL_UNIPHY1
[    7.811441] [drm] Connector 3:
[    7.811442] [drm]   DVI-I-1
[    7.811443] [drm]   HPD3
[    7.811445] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[    7.811446] [drm]   Encoders:
[    7.811447] [drm]     DFP4: INTERNAL_UNIPHY
[    7.811448] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    7.858242] [drm] fb mappable at 0xC0479000
[    7.858246] [drm] vram apper at 0xC0000000
[    7.858247] [drm] size 8294400
[    7.858248] [drm] fb depth is 24
[    7.858249] [drm]    pitch is 7680
[    7.858379] fbcon: radeondrmfb (fb0) is primary device
[    7.863911] Console: switching to colour frame buffer device 240x67
[    7.869014] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[    7.869015] radeon 0000:02:00.0: registered panic notifier
[    7.897333] [drm] Initialized radeon 2.42.0 20080528 for 0000:02:00.0 on minor 0
[    7.988340] cfg80211: Calling CRDA to update world regulatory domain
[    8.544839] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[   11.136725] cfg80211: Calling CRDA to update world regulatory domain
[   11.623859] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   14.290075] cfg80211: Calling CRDA to update world regulatory domain
[   14.860345] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   17.436712] cfg80211: Calling CRDA to update world regulatory domain
[   17.555466] fuse init (API version 7.23)
[   18.070496] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   20.583390] cfg80211: Calling CRDA to update world regulatory domain
[   23.730026] cfg80211: Calling CRDA to update world regulatory domain
[   23.777126] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   26.876740] cfg80211: Calling CRDA to update world regulatory domain
[   26.913824] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   30.023385] cfg80211: Calling CRDA to update world regulatory domain
[   30.770257] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   33.170032] cfg80211: Calling CRDA to update world regulatory domain
[   33.980163] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   36.316725] cfg80211: Calling CRDA to update world regulatory domain
[   37.177122] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   39.463388] cfg80211: Calling CRDA to update world regulatory domain
[   40.307053] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   42.610056] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[   44.730227] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   48.066889] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   52.863556] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   56.480295] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   60.870457] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   64.013600] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   71.120268] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   74.840457] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   79.916816] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   79.934892] sd 8:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[   79.934898] sd 8:0:0:0: [sdc] Sense not available.
[   84.343484] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   88.350149] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   91.646865] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   95.583530] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   99.180267] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  102.416964] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  102.434785] sd 8:0:0:0: [sdc] Write Protect is off
[  102.434793] sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00
[  109.023533] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  112.560219] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  117.616923] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  121.273865] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  127.730237] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  132.106863] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  132.124689] sd 8:0:0:0: [sdc] Asking for cache data failed
[  132.124698] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[  132.127700] sd 8:0:0:0: [sdc] Unit Not Ready
[  132.127708] sd 8:0:0:0: [sdc] Sense Key : 0x4 [current] 
[  132.127712] sd 8:0:0:0: [sdc] ASC=0x44 ASCQ=0x0 
[  135.833587] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  139.070294] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  142.320171] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  145.896874] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  151.886435] usb 1-1.1: USB disconnect, device number 3
[  151.953814] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  152.073362] usb 1-1.1: new high-speed USB device number 5 using ehci-pci
[  152.236107] usbcore: registered new interface driver cdc_ether
[  152.238776] rndis_host 1-1.1:1.0 usb0: register 'rndis_host' at usb-0000:00:1a.0-1.1, RNDIS device, 02:01:07:61:77:03
[  152.238806] usbcore: registered new interface driver rndis_host
[  152.253006] rndis_host 1-1.1:1.0 enp0s26u1u1: renamed from usb0
[  155.230195] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  160.416913] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  165.653812] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  168.870198] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  173.046920] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  177.263837] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  181.980255] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  187.456923] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  191.233559] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  194.443492] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  201.046903] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  205.023592] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  208.693762] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  213.490135] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  213.508226] sd 8:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[  213.508233] sd 8:0:0:0: [sdc] Sense not available.
[  219.573571] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  224.240230] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  228.636858] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  233.493577] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  237.890230] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  242.546898] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  247.503516] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  251.640229] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  255.216874] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  258.707072] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  261.863508] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  265.440228] usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  265.458016] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 1664.638284] usb 3-1: USB disconnect, device number 2
[ 1801.523517] usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 1801.546024] usb-storage 6-2:1.0: USB Mass Storage device detected
[ 1801.546313] scsi host10: usb-storage 6-2:1.0
[ 1802.547460] scsi 10:0:0:0: Direct-Access     WD       My Book 1140     1019 PQ: 0 ANSI: 6
[ 1802.547739] scsi 10:0:0:1: Enclosure         WD       SES Device       1019 PQ: 0 ANSI: 6
[ 1802.549944] ses 10:0:0:1: Attached Enclosure device
[ 1802.551302] ses 10:0:0:1: Failed to get diagnostic page 0x8000002
[ 1802.551312] ses 10:0:0:1: Failed to bind enclosure -19
[ 1802.552793] sd 10:0:0:0: [sdc] Unit Not Ready
[ 1802.552803] sd 10:0:0:0: [sdc] Sense Key : 0x4 [current] 
[ 1802.552810] sd 10:0:0:0: [sdc] ASC=0x44 ASCQ=0x0

I tried plugging it in a Windows machine right when it broke, windows couldn't find it. I tried downloading some tools then even, but they didn't help either - I think none of them could find it.

mich41 · 2015-09-20 16:05:58

It may be hardware damage.

Does smartctl -a /dev/sdc work by any chance?

You may have more luck if you take the drive out of the enclosure and connect it directly to a native SATA port.

caellyan · 2015-09-20 17:26:12

mich41 wrote:

It may be hardware damage.
Does smartctl -a /dev/sdc work by any chance?
You may have more luck if you take the drive out of the enclosure and connect it directly to a native SATA port.

smartctl will not work as this drive isn't assigned a "/dev/sd*" id (or whatever it is called).
I'm not sure if connecting it directly would have any effect considering the damage was caused by me improperly using the drive (plugging it out while it was loading), not me dropping it. Also, I dislike the idea of opening it and if that's the last option I would rather have someone else (who knows what he/she is doing) repair it.

mich41 · 2015-09-20 20:48:24

Maybe SCSI generic then:

modprobe sg
smartctl -d sat -a /dev/sgN    # consult dmesg|tail to find N

BTW, you did check that USB and power cables aren't loose?

Arch Linux

#1 2015-09-20 14:22:57

Only lsusb can find WD My Book Essential external HDD.

#2 2015-09-20 14:27:49

Re: Only lsusb can find WD My Book Essential external HDD.

#3 2015-09-20 14:43:14

Re: Only lsusb can find WD My Book Essential external HDD.

#4 2015-09-20 16:05:58

Re: Only lsusb can find WD My Book Essential external HDD.

#5 2015-09-20 17:26:12

Re: Only lsusb can find WD My Book Essential external HDD.

#6 2015-09-20 20:48:24

Re: Only lsusb can find WD My Book Essential external HDD.

Board footer