You are not logged in.

Pages: 1

#1 2015-09-27 07:43:51

Cooleech
Member
From: Solin, Croatia
Registered: 2015-01-23
Posts: 40

RTL8188SU - problem with kernel < 3.17* and > kernel 3.19*

As in title, I'm having problem with my USB WiFi adapter that has RTL8188SU chip. If I recall right, from kernel 3.17.* it works well and last one I can use without any problems is 3.19.*. With upgrading kernel to 4.* version I cannot connect to any WiFi network, tho Network Manager registers them. It's like it cannot get past "handsake". I tried sarching through forums but find nothing similar. I even tried to reinstall my Arch but without any success. Here are some outputs.
lsusb:


dmesg | grep -i rtl (kernel 3.19.3-3-ARCH):

[    9.887705] 8139too 0000:02:05.0 eth0: RealTek RTL8139 at 0xf800ac00, 00:15:f2:9c:36:71, IRQ 22
[   11.945079] r8712u: register rtl8712_netdev_ops to netdev_ops
[   12.545851] usb 1-8: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"

dmesg | grep -i rtl (kernel 4.1.8-1-LTS):

[   10.979845] 8139too 0000:02:05.0 eth0: RealTek RTL8139 at 0xf800ac00, 00:15:f2:9c:36:71, IRQ 22
[   12.686975] r8712u: register rtl8712_netdev_ops to netdev_ops
[   13.190914] usb 5-8: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"

full dmesg on kernel 4.1.8-1-LTS:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.8-1-lts (builduser@andyrtr) (gcc version 5.2.0 (GCC) ) #1 SMP Tue Sep 22 18:07:27 CEST 2015
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ffc0000-0x000000003ffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffba0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: System manufacturer System Product Name/P4P800-X, BIOS 080009   06/23/2005
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[    0.000000]  [mem 0x37000000-0x373fffff] page 4M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x36ffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x36ffffff] page 4M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x017f0000, 0x017f0fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x378c2000-0x37c58fff]
[    0.000000] Allocated new RAMDISK: [mem 0x37467000-0x377fdcab]
[    0.000000] Move RAMDISK from [mem 0x378c2000-0x37c58cab] to [mem 0x37467000-0x377fdcab]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FACA0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x000000003FFB0000 000030 (v01 A M I  OEMRSDT  06000523 MSFT 00000097)
[    0.000000] ACPI: FACP 0x000000003FFB0200 000081 (v02 A M I  OEMFACP  06000523 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x000000003FFB03F0 00376B (v01 AH004  AH004001 00000001 INTL 02002026)
[    0.000000] ACPI: FACS 0x000000003FFC0000 000040
[    0.000000] ACPI: APIC 0x000000003FFB0390 00005C (v01 A M I  OEMAPIC  06000523 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x000000003FFC0040 00003F (v01 A M I  OEMBIOS  06000523 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x017f1000, 0x017f1fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000377fdfff]
[    0.000000]   HighMem  [mem 0x00000000377fe000-0x000000003ffaffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003ffaffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffaffff]
[    0.000000] On node 0 totalpages: 261966
[    0.000000] free_area_init_node: node 0, pgdat c1667c80, node_mem_map f6a67028
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2180 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 34738 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xffb9ffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 18 pages/cpu @f6a3c000 s41484 r0 d32244 u73728
[    0.000000] pcpu-alloc: s41484 r0 d32244 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259746
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=cd1effc0-1dbd-41ed-beab-9379184d19fd rw quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1024768K/1047864K available (4777K kernel code, 493K rwdata, 1364K rodata, 604K init, 824K bss, 23096K reserved, 0K cma-reserved, 138952K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
                   pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
                   vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
                     .init : 0xc167e000 - 0xc1715000   ( 604 kB)
                     .data : 0xc14aa789 - 0xc167c480   (1863 kB)
                     .text : 0xc1000000 - 0xc14aa789   (4777 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f6434000 soft=f6436000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2598.747 MHz processor
[    0.010016] Calibrating delay loop (skipped), value calculated using timer frequency.. 5197.49 BogoMIPS (lpj=25987470)
[    0.010022] pid_max: default: 32768 minimum: 301
[    0.010032] ACPI: Core revision 20150410
[    0.021644] ACPI: All ACPI Tables successfully acquired
[    0.021677] Security Framework initialized
[    0.021687] Yama: becoming mindful.
[    0.021711] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.021716] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.022025] Initializing cgroup subsys blkio
[    0.022031] Initializing cgroup subsys memory
[    0.022045] Initializing cgroup subsys devices
[    0.022050] Initializing cgroup subsys freezer
[    0.022055] Initializing cgroup subsys net_cls
[    0.022084] CPU: Physical Processor ID: 0
[    0.022087] CPU: Processor Core ID: 0
[    0.022095] mce: CPU supports 4 MCE banks
[    0.022107] CPU0: Thermal monitoring enabled (TM1)
[    0.022121] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
[    0.022124] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.022300] Freeing SMP alternatives memory: 20K (c1715000 - c171a000)
[    0.023620] ftrace: allocating 20469 entries in 40 pages
[    0.037160] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.037525] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.140000] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz (fam: 0f, model: 02, stepping: 09)
[    0.140000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.140000] ... version:                0
[    0.140000] ... bit width:              40
[    0.140000] ... generic registers:      18
[    0.140000] ... value mask:             000000ffffffffff
[    0.140000] ... max period:             0000007fffffffff
[    0.140000] ... fixed-purpose events:   0
[    0.140000] ... event mask:             000000000003ffff
[    0.140000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.140000] CPU 1 irqstacks, hard=f651e000 soft=f6520000
[    0.140000] x86: Booting SMP configuration:
[    0.140000] .... node  #0, CPUs:      #1
[    0.020000] Initializing CPU#1
[    0.292070] x86: Booted up 1 node, 2 CPUs
[    0.292084] smpboot: Total of 2 processors activated (10395.13 BogoMIPS)
[    0.292680] devtmpfs: initialized
[    0.292680] PM: Registering ACPI NVS region [mem 0x3ffc0000-0x3ffeffff] (196608 bytes)
[    0.292680] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.292680] pinctrl core: initialized pinctrl subsystem
[    0.292680] RTC time:  7:07:17, date: 09/27/15
[    0.292680] NET: Registered protocol family 16
[    0.320006] cpuidle: using governor ladder
[    0.350011] cpuidle: using governor menu
[    0.350127] ACPI: bus type PCI registered
[    0.350132] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.350353] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[    0.350356] PCI: Using configuration type 1 for base access
[    0.380150] ACPI: Added _OSI(Module Device)
[    0.380150] ACPI: Added _OSI(Processor Device)
[    0.380150] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.380150] ACPI: Added _OSI(Processor Aggregator Device)
[    0.382964] ACPI: Executed 1 blocks of module-level executable AML code
[    0.385542] ACPI: Interpreter enabled
[    0.385572] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.385598] ACPI: (supports S0 S1 S3 S4 S5)
[    0.385602] ACPI: Using IOAPIC for interrupt routing
[    0.385664] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.395771] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.395782] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.395792] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.395894] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.395898] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.395902] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.395906] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffefffff window] (ignored)
[    0.395909] PCI: root bus 00: using default resources
[    0.395914] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.396133] PCI host bridge to bus 0000:00
[    0.396140] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.396144] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.396148] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.396165] pci 0000:00:00.0: [8086:2570] type 00 class 0x060000
[    0.396172] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.396183] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.396352] pci 0000:00:01.0: [8086:2571] type 01 class 0x060400
[    0.396511] pci 0000:00:06.0: [8086:2576] type 00 class 0x088000
[    0.396525] pci 0000:00:06.0: reg 0x10: [mem 0xfecf0000-0xfecf0fff]
[    0.396706] pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300
[    0.396755] pci 0000:00:1d.0: reg 0x20: [io  0xeec0-0xeedf]
[    0.396837] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.396934] pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300
[    0.396983] pci 0000:00:1d.1: reg 0x20: [io  0xef00-0xef1f]
[    0.397064] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.397161] pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300
[    0.397210] pci 0000:00:1d.2: reg 0x20: [io  0xef20-0xef3f]
[    0.397288] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.397384] pci 0000:00:1d.3: [8086:24de] type 00 class 0x0c0300
[    0.397433] pci 0000:00:1d.3: reg 0x20: [io  0xef40-0xef5f]
[    0.397514] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.397619] pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320
[    0.397642] pci 0000:00:1d.7: reg 0x10: [mem 0xffaff800-0xffaffbff]
[    0.397740] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.397800] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.397896] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[    0.397985] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.398081] pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100
[    0.398155] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.398164] pci 0000:00:1f.0: Enabled i801 SMBus device
[    0.398173] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
[    0.398180] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH4 GPIO
[    0.398306] pci 0000:00:1f.1: [8086:24db] type 00 class 0x01018f
[    0.398324] pci 0000:00:1f.1: reg 0x10: [io  0xeff0-0xeff7]
[    0.398337] pci 0000:00:1f.1: reg 0x14: [io  0xefe4-0xefe7]
[    0.398349] pci 0000:00:1f.1: reg 0x18: [io  0xefa8-0xefaf]
[    0.398361] pci 0000:00:1f.1: reg 0x1c: [io  0xefe0-0xefe3]
[    0.398372] pci 0000:00:1f.1: reg 0x20: [io  0xef90-0xef9f]
[    0.398384] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[    0.398527] pci 0000:00:1f.2: [8086:24d1] type 00 class 0x01018f
[    0.398543] pci 0000:00:1f.2: reg 0x10: [io  0xefa0-0xefa7]
[    0.398555] pci 0000:00:1f.2: reg 0x14: [io  0xef8c-0xef8f]
[    0.398566] pci 0000:00:1f.2: reg 0x18: [io  0xef80-0xef87]
[    0.398576] pci 0000:00:1f.2: reg 0x1c: [io  0xef88-0xef8b]
[    0.398587] pci 0000:00:1f.2: reg 0x20: [io  0xef60-0xef6f]
[    0.398734] pci 0000:00:1f.3: [8086:24d3] type 00 class 0x0c0500
[    0.398784] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.398928] pci 0000:00:1f.5: [8086:24d5] type 00 class 0x040100
[    0.398947] pci 0000:00:1f.5: reg 0x10: [io  0xe800-0xe8ff]
[    0.398959] pci 0000:00:1f.5: reg 0x14: [io  0xee80-0xeebf]
[    0.398970] pci 0000:00:1f.5: reg 0x18: [mem 0xffaff400-0xffaff5ff]
[    0.398982] pci 0000:00:1f.5: reg 0x1c: [mem 0xffaff000-0xffaff0ff]
[    0.399033] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.399223] pci 0000:01:00.0: [1002:5960] type 00 class 0x030000
[    0.399241] pci 0000:01:00.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[    0.399253] pci 0000:01:00.0: reg 0x14: [io  0xc000-0xc0ff]
[    0.399263] pci 0000:01:00.0: reg 0x18: [mem 0xff8f0000-0xff8fffff]
[    0.399292] pci 0000:01:00.0: reg 0x30: [mem 0xff8c0000-0xff8dffff pref]
[    0.399326] pci 0000:01:00.0: supports D1 D2
[    0.399409] pci 0000:01:00.1: [1002:5940] type 00 class 0x038000
[    0.399425] pci 0000:01:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[    0.399434] pci 0000:01:00.1: reg 0x14: [mem 0xff8e0000-0xff8effff]
[    0.399492] pci 0000:01:00.1: supports D1 D2
[    0.399605] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.399611] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.399617] pci 0000:00:01.0:   bridge window [mem 0xff800000-0xff8fffff]
[    0.399622] pci 0000:00:01.0:   bridge window [mem 0xd7f00000-0xf7efffff pref]
[    0.399698] pci 0000:02:05.0: [10ec:8139] type 00 class 0x020000
[    0.399717] pci 0000:02:05.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.399730] pci 0000:02:05.0: reg 0x14: [mem 0xff9ffc00-0xff9ffcff]
[    0.399799] pci 0000:02:05.0: supports D1 D2
[    0.399803] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[    0.399929] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.399936] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.399942] pci 0000:00:1e.0:   bridge window [mem 0xff900000-0xff9fffff]
[    0.399948] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.399952] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.399966] pci_bus 0000:00: on NUMA node 0
[    0.401462] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.401568] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.401671] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.401773] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.401876] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.401981] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.402094] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.402200] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.402469] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.402469] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.402469] vgaarb: loaded
[    0.402469] vgaarb: bridge control possible 0000:01:00.0
[    0.402469] PCI: Using ACPI for IRQ routing
[    0.402469] PCI: pci_cache_line_size set to 64 bytes
[    0.402469] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.402469] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[    0.402469] NetLabel: Initializing
[    0.402469] NetLabel:  domain hash size = 128
[    0.402469] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.402469] NetLabel:  unlabeled traffic allowed by default
[    0.402469] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.402469] hpet clockevent registered
[    0.402469] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.402469] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.402469] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.402573] Switched to clocksource hpet
[    0.414137] pnp: PnP ACPI init
[    0.414324] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.415102] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.415630] system 00:02: [io  0x0680-0x06ff] has been reserved
[    0.415635] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.415643] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.415920] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.415925] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.415929] system 00:03: [io  0x0400-0x041f] has been reserved
[    0.415933] system 00:03: [io  0x0480-0x04bf] has been reserved
[    0.415938] system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.415942] system 00:03: [mem 0xffb00000-0xffbfffff] could not be reserved
[    0.415948] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.416097] system 00:04: [io  0x03f6] has been reserved
[    0.416104] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.416269] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.416274] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.416280] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.416400] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.416777] pnp 00:07: [dma 0 disabled]
[    0.416886] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.417358] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.418302] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.418308] system 00:09: [mem 0x000c0000-0x000dffff] could not be reserved
[    0.418314] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.418318] system 00:09: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.418322] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[    0.418328] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.418553] pnp: PnP ACPI: found 10 devices
[    0.458268] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.458309] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[    0.458318] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.458323] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.458330] pci 0000:00:01.0:   bridge window [mem 0xff800000-0xff8fffff]
[    0.458335] pci 0000:00:01.0:   bridge window [mem 0xd7f00000-0xf7efffff pref]
[    0.458343] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.458348] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.458355] pci 0000:00:1e.0:   bridge window [mem 0xff900000-0xff9fffff]
[    0.458367] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.458371] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.458375] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.458379] pci_bus 0000:01: resource 1 [mem 0xff800000-0xff8fffff]
[    0.458382] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xf7efffff pref]
[    0.458386] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.458390] pci_bus 0000:02: resource 1 [mem 0xff900000-0xff9fffff]
[    0.458394] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.458398] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.458455] NET: Registered protocol family 2
[    0.458736] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.458761] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.458794] TCP: Hash tables configured (established 8192 bind 8192)
[    0.458837] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.458847] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.458922] NET: Registered protocol family 1
[    2.450022] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    2.450239] pci 0000:01:00.0: Video device with shadowed ROM
[    2.450250] PCI: CLS 16 bytes, default 64
[    2.450351] Unpacking initramfs...
[    2.563315] Freeing initrd memory: 3676K (f7467000 - f77fe000)
[    2.563480] apm: BIOS not found.
[    2.563575] Scanning for low memory corruption every 60 seconds
[    2.564232] futex hash table entries: 512 (order: 3, 32768 bytes)
[    2.564261] Initialise system trusted keyring
[    2.564764] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.568742] zpool: loaded
[    2.568748] zbud: loaded
[    2.568902] VFS: Disk quotas dquot_6.6.0
[    2.569001] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.569357] Key type big_key registered
[    2.569695] bounce: pool size: 64 pages
[    2.569788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.569858] io scheduler noop registered
[    2.569864] io scheduler deadline registered (default)
[    2.569944] io scheduler cfq registered
[    2.570197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.570234] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.570262] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    2.570265] vesafb: scrolling: redraw
[    2.570269] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    2.570294] vesafb: framebuffer at 0xe8000000, mapped to 0xf8400000, using 3072k, total 3072k
[    2.626342] Console: switching to colour frame buffer device 128x48
[    2.682222] fb0: VESA VGA frame buffer device
[    2.682306] GHES: HEST is not enabled!
[    2.682338] isapnp: Scanning for PnP cards...
[    2.995082] isapnp: No Plug & Play device found
[    2.995196] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.015785] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.036407] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.037158] rtc_cmos 00:00: RTC can wake from S4
[    3.037338] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    3.037372] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram, hpet irqs
[    3.037453] ledtrig-cpu: registered to indicate activity on CPUs
[    3.037994] NET: Registered protocol family 10
[    3.038339] NET: Registered protocol family 17
[    3.038656] Using IPI No-Shortcut mode
[    3.038966] Loading compiled-in X.509 certificates
[    3.038991] registered taskstats version 1
[    3.039437]   Magic number: 15:851:117
[    3.039528] rtc_cmos 00:00: setting system clock to 2015-09-27 07:07:19 UTC (1443337639)
[    3.039638] PM: Hibernation image not present or could not be loaded.
[    3.040171] Freeing unused kernel memory: 604K (c167e000 - c1715000)
[    3.040212] Write protecting the kernel text: 4780k
[    3.040265] Write protecting the kernel read-only data: 1368k
[    3.055342] random: systemd-tmpfile urandom read with 0 bits of entropy available
[    3.154665] ACPI: bus type USB registered
[    3.154767] usbcore: registered new interface driver usbfs
[    3.154814] usbcore: registered new interface driver hub
[    3.154886] usbcore: registered new device driver usb
[    3.157167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.158201] uhci_hcd: USB Universal Host Controller Interface driver
[    3.158486] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.158510] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.158525] uhci_hcd 0000:00:1d.0: detected 2 ports
[    3.158580] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0
[    3.161690] hub 1-0:1.0: USB hub found
[    3.161719] hub 1-0:1.0: 2 ports detected
[    3.162319] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.162347] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.162364] uhci_hcd 0000:00:1d.1: detected 2 ports
[    3.162416] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef00
[    3.164489] hub 2-0:1.0: USB hub found
[    3.164804] hub 2-0:1.0: 2 ports detected
[    3.165423] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.165448] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.165464] uhci_hcd 0000:00:1d.2: detected 2 ports
[    3.165514] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20
[    3.168692] hub 3-0:1.0: USB hub found
[    3.168729] hub 3-0:1.0: 2 ports detected
[    3.169304] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.169326] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.169341] uhci_hcd 0000:00:1d.3: detected 2 ports
[    3.169375] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef40
[    3.172471] hub 4-0:1.0: USB hub found
[    3.172504] hub 4-0:1.0: 2 ports detected
[    3.173586] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    3.173594] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    3.174420] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.182525] ehci-pci: EHCI PCI platform driver
[    3.185037] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    3.185060] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.185083] ehci-pci 0000:00:1d.7: debug port 1
[    3.187200] SCSI subsystem initialized
[    3.189033] ehci-pci 0000:00:1d.7: cache line size of 16 is not supported
[    3.189090] ehci-pci 0000:00:1d.7: irq 23, io mem 0xffaff800
[    3.190969] libata version 3.00 loaded.
[    3.200074] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.201025] hub 5-0:1.0: USB hub found
[    3.201067] hub 5-0:1.0: 8 ports detected
[    3.230406] hub 1-0:1.0: USB hub found
[    3.230450] hub 1-0:1.0: 2 ports detected
[    3.260211] hub 2-0:1.0: USB hub found
[    3.260256] hub 2-0:1.0: 2 ports detected
[    3.266083] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.290309] hub 3-0:1.0: USB hub found
[    3.290349] hub 3-0:1.0: 2 ports detected
[    3.320180] hub 4-0:1.0: USB hub found
[    3.320222] hub 4-0:1.0: 2 ports detected
[    3.320586] ata_piix 0000:00:1f.1: version 2.13
[    3.320607] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    3.324310] scsi host0: ata_piix
[    3.325309] scsi host1: ata_piix
[    3.325509] ata1: PATA max UDMA/100 cmd 0xeff0 ctl 0xefe4 bmdma 0xef90 irq 18
[    3.325523] ata2: PATA max UDMA/100 cmd 0xefa8 ctl 0xefe0 bmdma 0xef98 irq 18
[    3.325730] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    3.326930] scsi host2: ata_piix
[    3.327228] scsi host3: ata_piix
[    3.327418] ata3: SATA max UDMA/133 cmd 0xefa0 ctl 0xef8c bmdma 0xef60 irq 18
[    3.327426] ata4: SATA max UDMA/133 cmd 0xef80 ctl 0xef88 bmdma 0xef68 irq 18
[    3.500247] ata4.00: ATAPI: PIONEER DVD-RW  DVR-216D, 1.08, max UDMA/66
[    3.501198] ata3.00: ATA-8: WDC WD3200AAKS-75L9A0, 02.03E02, max UDMA/133
[    3.501203] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.520427] ata4.00: configured for UDMA/66 (SET_XFERMODE skipped)
[    3.521218] ata3.00: configured for UDMA/133
[    3.521405] scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-7 3E02 PQ: 0 ANSI: 5
[    3.560050] tsc: Refined TSC clocksource calibration: 2598.749 MHz
[    3.560059] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x25759e111d8, max_idle_ns: 440795204890 ns
[    3.583441] scsi 3:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-216D 1.08 PQ: 0 ANSI: 5
[    3.629044] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.629174] sd 2:0:0:0: [sda] Write Protect is off
[    3.629182] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.629260] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.665226]  sda: sda1 sda2 sda3 sda4
[    3.666161] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.690053] usb 1-2: new low-speed USB device number 2 using uhci_hcd
[    3.690753] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    3.690759] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.691155] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    3.780038] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    3.850038] usb 5-8: new high-speed USB device number 4 using ehci-pci
[    4.093601] hidraw: raw HID events driver (C) Jiri Kosina
[    4.109891] usbcore: registered new interface driver usbhid
[    4.109898] usbhid: USB HID core driver
[    4.112094] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:0458:003A.0001/input/input1
[    4.112252] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-2/input0
[    4.560129] Switched to clocksource tsc
[    6.200054] floppy0: no floppy controllers found
[    6.404571] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.075620] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.089010] systemd[1]: systemd 226 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[    7.089294] systemd[1]: Detected architecture x86.
[    7.094001] systemd[1]: Set hostname to <p4>.
[    8.175390] systemd[1]: Reached target Remote File Systems.
[    8.175562] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.175639] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.176372] systemd[1]: Created slice System Slice.
[    8.176652] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.176753] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.177000] systemd[1]: Created slice system-getty.slice.
[    8.177072] systemd[1]: Listening on udev Kernel Socket.
[    8.177303] systemd[1]: Created slice User and Session Slice.
[    8.177332] systemd[1]: Reached target Slices.
[    8.177417] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.177494] systemd[1]: Listening on udev Control Socket.
[    8.177583] systemd[1]: Listening on Journal Socket.
[    8.178810] systemd[1]: Mounting Huge Pages File System...
[    8.180820] systemd[1]: Mounting Debug File System...
[    8.182834] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.184669] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.186704] systemd[1]: Starting Setup Virtual Console...
[    8.188488] systemd[1]: Mounting POSIX Message Queue File System...
[    8.188689] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.217753] systemd[1]: Mounting Configuration File System...
[    8.220428] systemd[1]: Starting Apply Kernel Variables...
[    8.300210] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.300247] systemd[1]: Reached target Paths.
[    8.301785] systemd[1]: Starting Journal Service...
[    8.301837] systemd[1]: Reached target Encrypted Volumes.
[    8.301940] systemd[1]: Reached target Login Prompts.
[    8.302547] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.366561] systemd[1]: Mounting Temporary Directory...
[    8.371368] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.434748] EXT4-fs (sda1): re-mounted. Opts: (null)
[    8.436412] systemd[1]: Started Remount Root and Kernel File Systems.
[    8.438001] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.469839] systemd[1]: Starting udev Coldplug all Devices...
[    8.471882] systemd[1]: Starting Load/Save Random Seed...
[    8.476515] systemd[1]: Mounted Configuration File System.
[    8.476585] systemd[1]: Mounted Debug File System.
[    8.476622] systemd[1]: Mounted POSIX Message Queue File System.
[    8.476662] systemd[1]: Mounted Huge Pages File System.
[    8.476697] systemd[1]: Mounted Temporary Directory.
[    8.477863] systemd[1]: Started Apply Kernel Variables.
[    8.630570] systemd[1]: Started Load/Save Random Seed.
[    8.645334] systemd[1]: Started udev Coldplug all Devices.
[    9.023057] systemd[1]: Started Create Static Device Nodes in /dev.
[    9.023343] systemd[1]: Reached target Local File Systems (Pre).
[    9.025165] systemd[1]: Starting udev Kernel Device Manager...
[    9.215023] systemd[1]: Started Setup Virtual Console.
[    9.718624] systemd[1]: Started udev Kernel Device Manager.
[    9.808392] systemd[1]: Started Journal Service.
[    9.933509] systemd-journald[162]: Received request to flush runtime journal from PID 1
[   10.158311] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   10.158325] ACPI: Power Button [PWRB]
[   10.158523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   10.158535] ACPI: Power Button [PWRF]
[   10.288678] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.322741] Linux agpgart interface v0.103
[   10.330294] intel_rng: FWH not detected
[   10.391370] parport_pc 00:01: reported by Plug and Play ACPI
[   10.391421] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   10.433511] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[   10.436387] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[   10.791713] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   10.819287] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   10.819302] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[   10.973283] MPU-401 device not found or device busy
[   10.978572] 8139too: 8139too Fast Ethernet driver 0.9.28
[   10.979845] 8139too 0000:02:05.0 eth0: RealTek RTL8139 at 0xf800ac00, 00:15:f2:9c:36:71, IRQ 22
[   10.991007] [drm] Initialized drm 1.1.0 20060810
[   11.749078] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   11.781600] random: nonblocking pool is initialized
[   11.869515] [drm] radeon kernel modesetting enabled.
[   11.869649] checking generic (e8000000 300000) vs hw (e8000000 8000000)
[   11.869655] fb: switching to radeondrmfb from VESA VGA
[   11.869701] Console: switching to colour dummy device 80x25
[   11.874278] [drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x1458:0x4054).
[   11.874311] [drm] register mmio base: 0xFF8F0000
[   11.874316] [drm] register mmio size: 65536
[   11.876565] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[   11.876596] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[   11.876646] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[   11.876666] radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF
[   11.876673] [drm] Generation 2 PCI interface, using max accessible memory
[   11.876682] radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used)
[   11.876719] [drm] Detected VRAM RAM=128M, BAR=128M
[   11.876723] [drm] RAM width 128bits DDR
[   11.883899] [TTM] Zone  kernel: Available graphics memory: 445058 kiB
[   11.883907] [TTM] Zone highmem: Available graphics memory: 514534 kiB
[   11.883911] [TTM] Initializing pool allocator
[   11.883929] [TTM] Initializing DMA pool allocator
[   11.883980] [drm] radeon: 128M of VRAM memory ready
[   11.883985] [drm] radeon: 64M of GTT memory ready.
[   11.886007] radeon 0000:01:00.0: WB disabled
[   11.886022] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000f8000000 and cpu addr 0xf800c000
[   11.886030] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.886034] [drm] Driver supports precise vblank timestamp query.
[   11.886053] [drm] radeon: irq initialized.
[   11.886079] [drm] Loading R200 Microcode
[   12.205468] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e
[   12.308090] ppdev: user-space parallel port driver
[   12.333371] microcode: CPU1 sig=0xf29, pf=0x4, revision=0x2e
[   12.333815] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.380055] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 57957 usecs (2792 samples)
[   12.380064] snd_intel8x0 0000:00:1f.5: clocking to 48000
[   12.416091] [drm] radeon: ring at 0x00000000F8001000
[   12.416122] [drm] ring test succeeded in 0 usecs
[   12.416461] [drm] ib test succeeded in 0 usecs
[   12.425172] [drm] Radeon Display Connectors
[   12.425181] [drm] Connector 0:
[   12.425186] [drm]   VGA-1
[   12.425191] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   12.425195] [drm]   Encoders:
[   12.425199] [drm]     CRT1: INTERNAL_DAC1
[   12.425203] [drm] Connector 1:
[   12.425206] [drm]   DVI-I-1
[   12.425210] [drm]   HPD1
[   12.425215] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   12.425218] [drm]   Encoders:
[   12.425221] [drm]     CRT2: INTERNAL_DAC2
[   12.425224] [drm]     DFP1: INTERNAL_TMDS1
[   12.425227] [drm] Connector 2:
[   12.425231] [drm]   SVIDEO-1
[   12.425234] [drm]   Encoders:
[   12.425238] [drm]     TV1: INTERNAL_DAC2
[   12.445072] iTCO_vendor_support: vendor-support=0
[   12.450611] mousedev: PS/2 mouse device common for all mice
[   12.489198] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.489373] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[   12.490394] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.504536] [drm] fb mappable at 0xE8040000
[   12.504546] [drm] vram apper at 0xE8000000
[   12.504550] [drm] size 5763072
[   12.504554] [drm] fb depth is 24
[   12.504558] [drm]    pitch is 6400
[   12.520190] fbcon: radeondrmfb (fb0) is primary device
[   12.563833] 8139too 0000:02:05.0 enp2s5: renamed from eth0
[   12.571062] Console: switching to colour frame buffer device 200x56
[   12.589822] media: Linux media interface: v0.10
[   12.598670] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   12.598676] radeon 0000:01:00.0: registered panic notifier
[   12.630049] [drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
[   12.659634] Adding 997716k swap on /dev/sda4.  Priority:-1 extents:1 across:997716k FS
[   12.676262] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[   12.684149] Linux video capture interface: v2.00
[   12.686975] r8712u: register rtl8712_netdev_ops to netdev_ops
[   12.686989] usb 5-8: r8712u: USB_SPEED_HIGH with 4 endpoints
[   12.687546] usb 5-8: r8712u: Boot from EFUSE: Autoload OK
[   12.707883] gspca_main: v2.14.0 registered
[   12.724179] gspca_main: sonixj-2.14.0 probing 0c45:6142
[   12.895243] input: sonixj as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/input/input5
[   12.895599] usbcore: registered new interface driver sonixj
[   13.155300] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   13.190900] usb 5-8: r8712u: CustomerID = 0x0000
[   13.190909] usb 5-8: r8712u: MAC Address from efuse = 00:1f:1f:be:c4:57
[   13.190914] usb 5-8: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[   13.190999] usbcore: registered new interface driver r8712u
[   13.284642] r8712u 5-8:1.0 wlp0s29f7u8: renamed from wlan0
[   13.470065] floppy0: no floppy controllers found
[   15.861136] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
[   15.861339] 8139too 0000:02:05.0 enp2s5: link down
[   15.861421] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
[   15.977790] cfg80211: Calling CRDA to update world regulatory domain
[   15.981717] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
[   16.740539] r8712u 5-8:1.0 wlp0s29f7u8: 1 RCR=0x153f00e
[   16.741280] r8712u 5-8:1.0 wlp0s29f7u8: 2 RCR=0x553f00e
[   16.850352] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
[   17.170448] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
[   17.814940] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
[   19.130061] cfg80211: Calling CRDA to update world regulatory domain
[   21.612993] fuse init (API version 7.23)
[   22.290056] cfg80211: Calling CRDA to update world regulatory domain
[   25.450102] cfg80211: Calling CRDA to update world regulatory domain
[   28.610032] cfg80211: Calling CRDA to update world regulatory domain
[   31.770043] cfg80211: Calling CRDA to update world regulatory domain
[   34.930026] cfg80211: Calling CRDA to update world regulatory domain
[   38.090040] cfg80211: Calling CRDA to update world regulatory domain
[   41.250078] cfg80211: Calling CRDA to update world regulatory domain
[   44.410034] cfg80211: Calling CRDA to update world regulatory domain
[   47.570037] cfg80211: Calling CRDA to update world regulatory domain
[   50.730044] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[  138.086440] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
[  263.008849] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
[  376.270361] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
[  376.352751] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready

If you need anything else, just ask. I'm not sure how fast I'll respond but I will once I see someone answers to this thread.
Help?

Offline

#2 2015-09-27 12:54:19

mich41
Member
Registered: 2012-06-22
Posts: 796

Re: RTL8188SU - problem with kernel < 3.17* and > kernel 3.19*

You missed the most important line:

[   12.676262] r8712u: module is from the staging directory, the quality is unknown, you have been warned.

It's entirely possible that you just hit yet another kernel bug. It may be fixed in 4.2, who knows.

Also, it seems that you are missing CRDA and/or wireless-regdb. Install them just in case and check if regulatory settings are sane.

Offline

#3 2015-09-28 17:18:41

Cooleech
Member
From: Solin, Croatia
Registered: 2015-01-23
Posts: 40

Re: RTL8188SU - problem with kernel < 3.17* and > kernel 3.19*

Will do that, once I get to that PC. Thanx!

Offline

Pages: 1

Board footer

Powered by FluxBB