You are not logged in.
Pages: 1
Hey guys, I'm getting some really weird screen distortion both in the terminal and while running X, it looks like a bad refresh rate or something. Video is below (running Ubuntu while testing):
https://drive.google.com/open?id=0B5HxT … jVreUVzY3M
(Arch 4.2.2, Ubuntu 14.04 and 15.04 all have the same issue)
I've verified that the resolution/refresh rate it's using is correct, going so far as to read the EDID in windows (which works fine) and creating a custom modeline based on that information with xrandr, which gives the same result. If I try to use the other two modelines offered by xrandr, the screen becomes completely illegible. If I try to disable the i915 driver or modesetting, I get crazy transformer-like text shown in the picture:
http://imgur.com/OygCk5Z
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.2-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Sep 29 22:21:33 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/sda3 rw quiet nomodeset i915.modeset=0
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b934ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9350000-0x00000000b937ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9380000-0x00000000b938ffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b9390000-0x00000000b98d5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b98d6000-0x00000000b9b9cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9b9d000-0x00000000b9b9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9b9e000-0x00000000b9bdffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9be0000-0x00000000b9d4efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9d4f000-0x00000000b9ff9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Advantech Co.,Ltd. UTC-515D/Aptio CRB, BIOS 5.6.5 10/16/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BA800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 4 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xba800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x13fdfffff]
[ 0.000000] [mem 0x120000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1effffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f100000-0x1fffffff]
[ 0.000000] [mem 0x1f100000-0x1f1fffff] page 4k
[ 0.000000] [mem 0x1f200000-0x1fffffff] page 2M
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x20100000-0xb934ffff]
[ 0.000000] [mem 0x20100000-0x201fffff] page 4k
[ 0.000000] [mem 0x20200000-0xb91fffff] page 2M
[ 0.000000] [mem 0xb9200000-0xb934ffff] page 4k
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xb9b9d000-0xb9b9dfff]
[ 0.000000] [mem 0xb9b9d000-0xb9b9dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9be0000-0xb9d4efff]
[ 0.000000] [mem 0xb9be0000-0xb9d4efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9ffa000-0xb9ffffff]
[ 0.000000] [mem 0xb9ffa000-0xb9ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3756e000-0x37aaefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0530 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000B9383078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000B938EE20 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150619/tbfadt-623)
[ 0.000000] ACPI: DSDT 0x00000000B9383180 00BC9F (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000B98D5F80 000040
[ 0.000000] ACPI: APIC 0x00000000B938EF30 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000B938EFB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000B938F000 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
[ 0.000000] ACPI: MCFG 0x00000000B938F108 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000B938F148 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000B938F180 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000B938F8E8 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000B938FB78 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000B938FCF8 000042 (v01 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13fff6000-0x13fff9fff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001effffff]
[ 0.000000] node 0: [mem 0x000000001f100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020100000-0x00000000b934ffff]
[ 0.000000] node 0: [mem 0x00000000b9b9d000-0x00000000b9b9dfff]
[ 0.000000] node 0: [mem 0x00000000b9be0000-0x00000000b9d4efff]
[ 0.000000] node 0: [mem 0x00000000b9ffa000-0x00000000b9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 1020514
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11788 pages used for memmap
[ 0.000000] DMA32 zone: 754374 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0xbb000000-0xbeffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9350000-0xb937ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9380000-0xb938ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9390000-0xb98d5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb98d6000-0xb9b9cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9b9e000-0xb9bdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9d4f000-0xb9ff9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed0c000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88013fc00000 s91480 r8192 d31400 u524288
[ 0.000000] pcpu-alloc: s91480 r8192 d31400 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1004545
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/sda3 rw quiet nomodeset i915.modeset=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3932696K/4082056K available (5591K kernel code, 922K rwdata, 1764K rodata, 1180K init, 1152K bss, 149360K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x18
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 1996800 KHz
[ 0.000000] lapic_timer_frequency = 277333
[ 0.000000] tsc: Detected 1996.800 MHz processor
[ 0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 3995.00 BogoMIPS (lpj=6656000)
[ 0.000047] pid_max: default: 32768 minimum: 301
[ 0.000059] ACPI: Core revision 20150619
[ 0.022928] ACPI: All ACPI Tables successfully acquired
[ 0.022971] Security Framework initialized
[ 0.022976] Yama: becoming mindful.
[ 0.023472] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.025343] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.026189] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.026206] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.026579] Initializing cgroup subsys blkio
[ 0.026588] Initializing cgroup subsys memory
[ 0.026605] Initializing cgroup subsys devices
[ 0.026612] Initializing cgroup subsys freezer
[ 0.026617] Initializing cgroup subsys net_cls
[ 0.026642] CPU: Physical Processor ID: 0
[ 0.026645] CPU: Processor Core ID: 0
[ 0.026651] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.026654] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.031447] mce: CPU supports 6 MCE banks
[ 0.031458] CPU0: Thermal monitoring enabled (TM1)
[ 0.031463] process: using mwait in idle threads
[ 0.031470] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.031472] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.031633] Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
[ 0.051485] ftrace: allocating 22094 entries in 87 pages
[ 0.064789] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.097831] TSC deadline timer enabled
[ 0.097836] smpboot: CPU0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (fam: 06, model: 37, stepping: 08)
[ 0.097875] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.097891] ... version: 3
[ 0.097893] ... bit width: 40
[ 0.097896] ... generic registers: 2
[ 0.097898] ... value mask: 000000ffffffffff
[ 0.097900] ... max period: 000000ffffffffff
[ 0.097902] ... fixed-purpose events: 3
[ 0.097905] ... event mask: 0000000700000003
[ 0.111323] x86: Booting SMP configuration:
[ 0.111327] .... node #0, CPUs: #1
[ 0.119342] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.122651] #2 #3
[ 0.141790] x86: Booted up 1 node, 4 CPUs
[ 0.141796] smpboot: Total of 4 processors activated (15980.00 BogoMIPS)
[ 0.142730] devtmpfs: initialized
[ 0.150080] PM: Registering ACPI NVS region [mem 0xb9390000-0xb98d5fff] (5529600 bytes)
[ 0.150376] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.150535] pinctrl core: initialized pinctrl subsystem
[ 0.150596] RTC time: 16:47:04, date: 10/09/15
[ 0.150868] NET: Registered protocol family 16
[ 0.161817] cpuidle: using governor ladder
[ 0.175169] cpuidle: using governor menu
[ 0.175252] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.175256] ACPI: bus type PCI registered
[ 0.175260] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.175385] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.175391] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.175422] PCI: Using configuration type 1 for base access
[ 0.189214] ACPI: Added _OSI(Module Device)
[ 0.189219] ACPI: Added _OSI(Processor Device)
[ 0.189223] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.189225] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.204361] ACPI: Dynamic OEM Table Load:
[ 0.204375] ACPI: SSDT 0xFFFF88013A69C800 0003BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.205573] ACPI: Dynamic OEM Table Load:
[ 0.205584] ACPI: SSDT 0xFFFF88013A631800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.207187] ACPI: Dynamic OEM Table Load:
[ 0.207196] ACPI: SSDT 0xFFFF88013A63A200 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.208342] ACPI: Dynamic OEM Table Load:
[ 0.208351] ACPI: SSDT 0xFFFF88013A61D6C0 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.210871] ACPI : EC: EC started
[ 0.211047] ACPI: Interpreter enabled
[ 0.211060] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.211070] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.211100] ACPI: (supports S0 S3 S4 S5)
[ 0.211104] ACPI: Using IOAPIC for interrupt routing
[ 0.211166] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.225374] ACPI: Power Resource [USBC] (on)
[ 0.227209] ACPI: Power Resource [PLPE] (on)
[ 0.227588] ACPI: Power Resource [PLPE] (on)
[ 0.233427] ACPI: Power Resource [CLK0] (on)
[ 0.233515] ACPI: Power Resource [CLK1] (on)
[ 0.308112] ACPI: Power Resource [FN00] (off)
[ 0.309282] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.309294] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.309592] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.309874] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.309879] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.310686] PCI host bridge to bus 0000:00
[ 0.310693] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.310698] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.310702] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.310706] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.310711] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.310715] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.310719] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.310723] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.310728] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0d15ffe window]
[ 0.310740] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.310971] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.310994] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[ 0.311007] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.311020] pci 0000:00:02.0: reg 0x20: [io 0xe080-0xe087]
[ 0.311249] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[ 0.311280] pci 0000:00:13.0: reg 0x10: [io 0xe070-0xe077]
[ 0.311292] pci 0000:00:13.0: reg 0x14: [io 0xe060-0xe063]
[ 0.311303] pci 0000:00:13.0: reg 0x18: [io 0xe050-0xe057]
[ 0.311314] pci 0000:00:13.0: reg 0x1c: [io 0xe040-0xe043]
[ 0.311325] pci 0000:00:13.0: reg 0x20: [io 0xe020-0xe03f]
[ 0.311336] pci 0000:00:13.0: reg 0x24: [mem 0xd0d15000-0xd0d157ff]
[ 0.311373] pci 0000:00:13.0: PME# supported from D3hot
[ 0.311572] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.311602] pci 0000:00:14.0: reg 0x10: [mem 0xd0d00000-0xd0d0ffff 64bit]
[ 0.311656] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.311811] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.311902] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.311944] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[ 0.311959] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[ 0.312047] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.312294] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 0.312329] pci 0000:00:1b.0: reg 0x10: [mem 0xd0d10000-0xd0d13fff 64bit]
[ 0.312393] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.312589] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 0.312653] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.312851] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 0.312915] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.313110] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[ 0.313173] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.313373] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[ 0.313437] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.313644] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.313905] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 0.313956] pci 0000:00:1f.3: reg 0x10: [mem 0xd0d14000-0xd0d1401f]
[ 0.314030] pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f]
[ 0.314365] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.314509] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[ 0.314571] pci 0000:02:00.0: reg 0x10: [mem 0xd0a00000-0xd0afffff]
[ 0.314611] pci 0000:02:00.0: reg 0x18: [io 0xd000-0xd01f]
[ 0.314639] pci 0000:02:00.0: reg 0x1c: [mem 0xd0b00000-0xd0b03fff]
[ 0.314681] pci 0000:02:00.0: reg 0x30: [mem 0xd0900000-0xd09fffff pref]
[ 0.314752] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.314814] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.318777] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.318784] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.318790] pci 0000:00:1c.1: bridge window [mem 0xd0900000-0xd0bfffff]
[ 0.318907] pci 0000:03:00.0: [168c:002a] type 00 class 0x028000
[ 0.318957] pci 0000:03:00.0: reg 0x10: [mem 0xd0c00000-0xd0c0ffff 64bit]
[ 0.319062] pci 0000:03:00.0: supports D1
[ 0.319066] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.319113] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.325442] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.325450] pci 0000:00:1c.2: bridge window [mem 0xd0c00000-0xd0cfffff]
[ 0.325591] pci 0000:04:00.0: [8086:1533] type 00 class 0x020000
[ 0.325653] pci 0000:04:00.0: reg 0x10: [mem 0xd0700000-0xd07fffff]
[ 0.325695] pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc01f]
[ 0.325712] pci 0000:04:00.0: reg 0x1c: [mem 0xd0800000-0xd0803fff]
[ 0.325754] pci 0000:04:00.0: reg 0x30: [mem 0xd0600000-0xd06fffff pref]
[ 0.325824] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.325887] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.332128] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.332135] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.332141] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd08fffff]
[ 0.334872] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.335001] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.335129] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.335256] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.335383] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.335526] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.335655] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.335781] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.337227] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.337279] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.337511] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.337516] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.337524] vgaarb: loaded
[ 0.337527] vgaarb: bridge control possible 0000:00:02.0
[ 0.337737] PCI: Using ACPI for IRQ routing
[ 0.343750] PCI: pci_cache_line_size set to 64 bytes
[ 0.343847] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.343851] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[ 0.343854] e820: reserve RAM buffer [mem 0xb9350000-0xbbffffff]
[ 0.343858] e820: reserve RAM buffer [mem 0xb9b9e000-0xbbffffff]
[ 0.343861] e820: reserve RAM buffer [mem 0xb9d4f000-0xbbffffff]
[ 0.343864] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
[ 0.344087] NetLabel: Initializing
[ 0.344091] NetLabel: domain hash size = 128
[ 0.344093] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.344117] NetLabel: unlabeled traffic allowed by default
[ 0.344202] clocksource: Switched to clocksource refined-jiffies
[ 0.354476] pnp: PnP ACPI init
[ 0.354589] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.354839] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.354845] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.354850] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.354854] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.354862] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.355069] system 00:02: [io 0x0b00-0x0b7f] has been reserved
[ 0.355077] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.356238] system 00:03: [io 0x0a00-0x0a2f] has been reserved
[ 0.356246] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.357224] pnp 00:04: [dma 0 disabled]
[ 0.357326] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.357785] pnp 00:05: [dma 0 disabled]
[ 0.357881] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.358344] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.358350] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.358355] system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.358360] system 00:06: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.358364] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.358369] system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.358374] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.358378] system 00:06: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.358385] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359628] pnp: PnP ACPI: found 7 devices
[ 0.368335] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.368365] clocksource: Switched to clocksource acpi_pm
[ 0.368395] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.368403] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.368408] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.368419] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.368430] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.368436] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.368447] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.368461] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.368466] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.368471] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.368476] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.368481] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.368486] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.368491] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.368496] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.368501] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.368505] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.368510] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.368515] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.368519] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.368524] pci 0000:00:1c.2: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.368534] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[ 0.368539] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.368550] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.368554] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.368564] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.368568] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.368578] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.368582] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.368592] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.368596] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.368604] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.368610] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.368622] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.368626] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.368636] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.368640] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.368650] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.368654] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.368661] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[ 0.368665] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.368674] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.368679] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.368683] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.368689] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.368701] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.368705] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.368712] pci 0000:00:1c.1: bridge window [mem 0xd0900000-0xd0bfffff]
[ 0.368726] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.368734] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.368743] pci 0000:00:1c.2: bridge window [mem 0xd0c00000-0xd0cfffff]
[ 0.368753] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.368758] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.368764] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd08fffff]
[ 0.368774] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.368778] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.368782] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.368786] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.368790] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.368795] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.368799] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.368803] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xd0d15ffe window]
[ 0.368807] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.368811] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.368815] pci_bus 0000:02: resource 1 [mem 0xd0900000-0xd0bfffff]
[ 0.368819] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.368823] pci_bus 0000:03: resource 1 [mem 0xd0c00000-0xd0cfffff]
[ 0.368827] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.368831] pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd08fffff]
[ 0.368894] NET: Registered protocol family 2
[ 0.369251] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.369396] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.369555] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.369619] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.369661] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.369788] NET: Registered protocol family 1
[ 0.369820] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.370222] PCI: CLS 64 bytes, default 64
[ 0.370333] Unpacking initramfs...
[ 0.521419] Freeing initrd memory: 5380K (ffff88003756e000 - ffff880037aaf000)
[ 0.521438] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.521443] software IO TLB [mem 0xb5350000-0xb9350000] (64MB) mapped at [ffff8800b5350000-ffff8800b934ffff]
[ 0.521683] microcode: CPU0 sig=0x30678, pf=0x4, revision=0x815
[ 0.521700] microcode: CPU1 sig=0x30678, pf=0x4, revision=0x815
[ 0.521718] microcode: CPU2 sig=0x30678, pf=0x4, revision=0x815
[ 0.521735] microcode: CPU3 sig=0x30678, pf=0x4, revision=0x815
[ 0.521863] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.522128] Scanning for low memory corruption every 60 seconds
[ 0.522732] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.522760] Initialise system trusted keyring
[ 0.523289] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.526499] zpool: loaded
[ 0.526505] zbud: loaded
[ 0.526831] VFS: Disk quotas dquot_6.6.0
[ 0.526905] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.527230] Key type big_key registered
[ 0.527669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.527789] io scheduler noop registered
[ 0.527796] io scheduler deadline registered
[ 0.527880] io scheduler cfq registered (default)
[ 0.528807] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.528824] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.528858] efifb: probing for efifb
[ 0.528866] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
[ 0.528870] efifb: mode is 640x480x1, linelength=80, pages=1
[ 0.528872] efifb: scrolling: redraw
[ 0.528876] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.531627] Console: switching to colour frame buffer device 80x30
[ 0.534250] fb0: EFI VGA frame buffer device
[ 0.534270] intel_idle: MWAIT substates: 0x33000020
[ 0.534274] intel_idle: v0.4 model 0x37
[ 0.534276] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.534662] GHES: HEST is not enabled!
[ 0.534806] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.555667] 00:04: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 16550A
[ 0.576670] 00:05: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.577715] hpet: number irqs doesn't agree with number of timers
[ 0.577763] Linux agpgart interface v0.103
[ 0.578488] rtc_cmos 00:00: RTC can wake from S4
[ 0.578739] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.578793] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 0.578816] Intel P-state driver initializing.
[ 0.579291] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.581666] NET: Registered protocol family 10
[ 0.582847] NET: Registered protocol family 17
[ 0.584183] Loading compiled-in X.509 certificates
[ 0.584225] registered taskstats version 1
[ 0.584248] zswap: loading zswap
[ 0.584256] zswap: using zbud pool
[ 0.584269] zswap: using lzo compressor
[ 0.586135] Magic number: 3:633:792
[ 0.586593] rtc_cmos 00:00: setting system clock to 2015-10-09 16:47:05 UTC (1444409225)
[ 0.586898] PM: Hibernation image not present or could not be loaded.
[ 0.588120] Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
[ 0.588127] Write protecting the kernel read-only data: 8192k
[ 0.589668] Freeing unused kernel memory: 544K (ffff880001578000 - ffff880001600000)
[ 0.590462] Freeing unused kernel memory: 284K (ffff8800017b9000 - ffff880001800000)
[ 0.595361] random: systemd urandom read with 1 bits of entropy available
[ 0.596768] systemd[1]: systemd 226 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 0.597142] systemd[1]: Detected architecture x86-64.
[ 0.597151] systemd[1]: Running in initial RAM disk.
[ 0.597167] systemd[1]: Running with unpopulated /etc.
[ 0.597186] systemd[1]: No hostname configured.
[ 0.597197] systemd[1]: Set hostname to <localhost>.
[ 0.597271] systemd[1]: Initializing machine ID from random generator.
[ 0.601736] systemd[1]: Populated /etc with preset unit settings.
[ 0.621369] systemd[1]: Listening on Journal Socket.
[ 0.621495] systemd[1]: Reached target Swap.
[ 0.621541] systemd[1]: Reached target Local File Systems.
[ 0.621631] systemd[1]: Listening on udev Control Socket.
[ 0.621720] systemd[1]: Listening on Journal Socket (/dev/log).
[ 0.621764] systemd[1]: Reached target Paths.
[ 0.621837] systemd[1]: Listening on udev Kernel Socket.
[ 0.621881] systemd[1]: Reached target Sockets.
[ 0.621926] systemd[1]: Reached target Timers.
[ 0.622554] systemd[1]: Created slice system.slice.
[ 0.623350] systemd[1]: Starting Journal Service...
[ 0.624411] systemd[1]: Starting udev Coldplug all Devices...
[ 0.625940] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 0.625985] systemd[1]: Reached target Slices.
[ 0.631354] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 0.632541] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 0.636699] systemd[1]: Started Create Static Device Nodes in /dev.
[ 0.637846] systemd[1]: Starting udev Kernel Device Manager...
[ 0.645991] systemd[1]: Started udev Kernel Device Manager.
[ 0.688618] systemd[1]: Started Journal Service.
[ 0.693863] sdhci: Secure Digital Host Controller Interface driver
[ 0.693868] sdhci: Copyright(c) Pierre Ossman
[ 0.725079] SCSI subsystem initialized
[ 0.726800] ACPI: bus type USB registered
[ 0.726853] usbcore: registered new interface driver usbfs
[ 0.726874] usbcore: registered new interface driver hub
[ 0.726927] usbcore: registered new device driver usb
[ 0.728014] libata version 3.00 loaded.
[ 0.730156] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.730174] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.730579] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.730588] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.731037] hub 1-0:1.0: USB hub found
[ 0.731060] hub 1-0:1.0: 6 ports detected
[ 0.732044] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.732054] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.733623] hub 2-0:1.0: USB hub found
[ 0.733646] hub 2-0:1.0: 1 port detected
[ 0.734433] ahci 0000:00:13.0: version 3.0
[ 0.735109] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[ 0.745882] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 0.745891] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso
[ 0.746951] scsi host0: ahci
[ 0.747268] scsi host1: ahci
[ 0.747371] ata1: SATA max UDMA/133 abar m2048@0xd0d15000 port 0xd0d15100 irq 88
[ 0.747375] ata2: DUMMY
[ 1.066796] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.090098] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 1.102806] ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
[ 1.102817] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.236320] ata1.00: configured for UDMA/133
[ 1.237132] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5
[ 1.243494] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.243503] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.243687] sd 0:0:0:0: [sda] Write Protect is off
[ 1.243695] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.243775] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.264968] hub 1-2:1.0: USB hub found
[ 1.265022] hub 1-2:1.0: 4 ports detected
[ 1.275969] sda: sda1 sda2 sda3 sda4
[ 1.277899] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.424095] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 1.524026] tsc: Refined TSC clocksource calibration: 2000.012 MHz
[ 1.524035] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd43976ed6, max_idle_ns: 440795242551 ns
[ 1.598497] hub 1-3:1.0: USB hub found
[ 1.598548] hub 1-3:1.0: 4 ports detected
[ 1.664636] usb 1-2.1: new high-speed USB device number 4 using xhci_hcd
[ 1.759795] hub 1-2.1:1.0: USB hub found
[ 1.759904] hub 1-2.1:1.0: 4 ports detected
[ 1.918578] usb 1-4: new high-speed USB device number 5 using xhci_hcd
[ 1.937706] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.095920] hub 1-4:1.0: USB hub found
[ 2.096059] hub 1-4:1.0: 4 ports detected
[ 2.171952] usb 1-3.2: new low-speed USB device number 6 using xhci_hcd
[ 2.180510] systemd-journald[62]: Received SIGTERM from PID 1 (systemd).
[ 2.272821] usb 1-3.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.272833] usb 1-3.2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 2.345926] usb 1-2.1.1: new low-speed USB device number 7 using xhci_hcd
[ 2.446091] usb 1-2.1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.519560] usb 1-3.3: new full-speed USB device number 8 using xhci_hcd
[ 2.526822] clocksource: Switched to clocksource tsc
[ 2.921744] random: nonblocking pool is initialized
[ 3.150526] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.088917] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 5.635847] systemd-journald[169]: File /var/log/journal/afc6f105115c4149a05ec8243847c76c/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 6.183170] systemd-journald[169]: Received request to flush runtime journal from PID 1
[ 6.802356] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 6.802365] ACPI: Power Button [PWRB]
[ 6.802449] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 6.802454] ACPI: Sleep Button [SLPB]
[ 6.802540] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.802544] ACPI: Power Button [PWRF]
[ 7.002377] ACPI Warning: SystemIO range 0x000000000000E000-0x000000000000E01F conflicts with OpRegion 0x000000000000E000-0x000000000000E00F (\_SB_.PCI0.SBUS.SMBI) (20150619/utaddress-254)
[ 7.002389] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.021301] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.171085] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.241857] [drm] Initialized drm 1.1.0 20060810
[ 7.281135] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.281141] ACPI: Thermal Zone [TZ01] (27 C)
[ 7.389205] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.407130] dca service started, version 1.12.1
[ 7.485443] pps_core: LinuxPPS API ver. 1 registered
[ 7.485449] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 7.487175] PTP clock support registered
[ 7.526756] snd_hda_intel 0000:00:1b.0: failed to add i915 component master (-19)
[ 7.617692] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
[ 7.617698] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 7.649142] pps pps0: new PPS source ptp0
[ 7.649150] igb 0000:02:00.0: added PHC on eth0
[ 7.649154] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 7.649157] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0b:ab:8d:62:d1
[ 7.649209] igb 0000:02:00.0: eth0: PBA No: 000200-000
[ 7.649213] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 7.680221] pps pps1: new PPS source ptp1
[ 7.680229] igb 0000:04:00.0: added PHC on eth1
[ 7.680232] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 7.680236] igb 0000:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0b:ab:8d:62:d0
[ 7.680287] igb 0000:04:00.0: eth1: PBA No: 000200-000
[ 7.680291] igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 7.727160] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:hp
[ 7.727167] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.727171] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.727174] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.727177] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.727180] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 7.727183] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 7.806493] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 7.806616] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 7.806727] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.806839] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.842324] iTCO_vendor_support: vendor-support=0
[ 7.860335] usbcore: registered new interface driver usbhid
[ 7.860340] usbhid: USB HID core driver
[ 7.897709] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.897788] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 7.897969] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.913741] input: DIALOGUE INC PenMount USB as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:14E1:6000.0004/input/input8
[ 7.913893] hid-penmount 0003:14E1:6000.0004: input,hidraw0: USB HID v1.01 Mouse [DIALOGUE INC PenMount USB] on usb-0000:00:14.0-3.3/input0
[ 7.938701] mousedev: PS/2 mouse device common for all mice
[ 7.970808] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:046D:C31C.0001/input/input9
[ 8.023547] hid-generic 0003:046D:C31C.0001: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-3.2/input0
[ 8.025106] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.1/0003:046D:C31C.0002/input/input10
[ 8.081751] intel_soc_dts_thermal: request_threaded_irq ret -22
[ 8.130649] hid-generic 0003:046D:C31C.0002: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-3.2/input1
[ 8.130882] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1.1/1-2.1.1:1.0/0003:093A:2510.0003/input/input11
[ 8.131064] hid-generic 0003:093A:2510.0003: input,hidraw3: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:14.0-2.1.1/input0
[ 8.154926] intel_soc_dts_thermal: request_threaded_irq ret -22
[ 8.300854] ath: phy0: ASPM enabled: 0x42
[ 8.300860] ath: EEPROM regdomain: 0x60
[ 8.300862] ath: EEPROM indicates we should expect a direct regpair map
[ 8.300866] ath: Country alpha2 being used: 00
[ 8.300868] ath: Regpair used: 0x60
[ 8.319489] intel_rapl: Found RAPL domain package
[ 8.319497] intel_rapl: Found RAPL domain core
[ 8.331715] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.332266] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900007c0000, irq=18
[ 8.395861] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 8.494036] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 8.707720] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 11.825656] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.088973] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.122277] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.376777] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.381496] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.397357] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.674336] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.348752] igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 15.349040] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.362940] tun: Universal TUN/TAP device driver, 1.6
[ 29.362947] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>hwinfo:
01: None 00.0: 10103 CPU
[Created at cpu.457]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: "GenuineIntel"
Model: 6.55.8 "Intel(R) Celeron(R) CPU J1900 @ 1.99GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,sse4_2,movbe,popcnt,tsc_deadline_timer,rdrand,lahf_lm,3dnowprefetch,ida,arat,epb,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,tsc_adjust,smep,erms
Clock: 2415 MHz
BogoMips: 3995.00
Cache: 1024 kb
Units/Processor: 16
Config Status: cfg=new, avail=yes, need=no, active=unknown
07: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.328]
Unique ID: _Znp.H65rpC2Tns8
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Device Name: "Onboard IGD"
Model: "Intel ValleyView Gen7"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0f31 "ValleyView Gen7"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x0f31
Revision: 0x0e
Memory Range: 0xd0000000-0xd03fffff (rw,non-prefetchable)
Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
I/O Ports: 0xe080-0xe087 (rw)
IRQ: 10 (no events)
Module Alias: "pci:v00008086d00000F31sv00008086sd00000F31bc03sc00i00"
Driver Info #0:
Driver Status: i915 is active
Driver Activation Cmd: "modprobe i915"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Primary display adapter: #7xrandr:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
DP2 connected 1366x768+0+0 (normal left inverted right x axis y axis) 518mm x 333mm
1366x768 66.28*+
1024x768 85.00
848x480 60.00Grub seems to display just fine, albeit at a lower resolution. Does anyone have any suggestions for what to look into? I would even be content just to have whatever settings Grub is using for the time being.
Last edited by Thornet (2015-10-09 17:11:26)
Offline
Pages: 1