You are not logged in.
- Topics: Active | Unanswered
#1 2015-11-11 03:26:14
- useraddition
- Member
- Registered: 2013-06-07
- Posts: 144
Still... Segmentation fault errors on several programs
Hi I've had this problem for a wicked long time so this time around i will post debugging information unlike I did last time so here we go.
dmesg | grep -i microcode
[ 1.363259] microcode: CPU0: patch_level=0x06001116
[ 1.363281] microcode: CPU1: patch_level=0x06001116
[ 1.363295] microcode: CPU2: patch_level=0x06001116
[ 1.363305] microcode: CPU3: patch_level=0x06001116
[ 1.363388] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 23.928175] microcode: CPU0: new patch_level=0x06001119
[ 23.943076] microcode: CPU2: new patch_level=0x06001119
[krazybastid@krazy8957889697 ~]$ less /boot/syslinux/syslinux.cfg
[krazybastid@krazy8957889697 ~]$ dmesg | grep microcode
[ 1.363259] microcode: CPU0: patch_level=0x06001116
[ 1.363281] microcode: CPU1: patch_level=0x06001116
[ 1.363295] microcode: CPU2: patch_level=0x06001116
[ 1.363305] microcode: CPU3: patch_level=0x06001116
[ 1.363388] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 23.928175] microcode: CPU0: new patch_level=0x06001119
[ 23.943076] microcode: CPU2: new patch_level=0x06001119So what I did from there is install the intel unicode package and put the entry in my boot loader like i saw on previous posts. I also downloaded a tool off of AUR called iucode-tool. This is the output of that command:
#bsdtar -Oxf /boot/intel-ucode.img | iucode_tool -tb -lS -
selected microcodes:
#Now as you can see there is no sufficient unicode available for my system, Intel Broadwell. There is nothing worthwhile installed. But there is another backdoor to this. After I updated catalyst back in May when i did an pacman -Syu thats when I got a bunch of stuff start to break. So here is the output of my lspci:
#lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7660G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411 PCI Express Card Reader (rev 01)
01:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
[root@krazy8957889697 krazybastid]# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7660G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411 PCI Express Card Reader (rev 01)
01:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)For the conclusion I have to find the proper unicode download off of the web to catch up with my updates and catalyst screws, or which I also belive to be pertnant is downgrade my catalyst before my April 2015 upgrade. I was wondering what are your guys thoughts on all of this I have tryed all of the fixes and even recomiled glibc from scratch and did that enable-elision-lock thing and I still have these segmentation faults. Theres no intel-unicode available updated for my hardware or what I think is I have to downgrade my catalyst. But how can I do that?
Offline
#2 2015-11-11 13:07:05
- R00KIE
- Forum Fellow
- From: Between a computer and a chair
- Registered: 2008-09-14
- Posts: 4,734
Re: Still... Segmentation fault errors on several programs
I'm curious about what 'cat /proc/cpuinfo' says.
R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K
Offline
#3 2015-11-16 18:02:53
- useraddition
- Member
- Registered: 2013-06-07
- Posts: 144
Re: Still... Segmentation fault errors on several programs
Sorry I took so long to respond here is the output of cat /proc/cpuinfo
$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-4600M APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 16
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1
bugs : fxsave_leak sysret_ss_attrs
bogomips : 4592.39
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
processor : 1
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-4600M APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 17
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1
bugs : fxsave_leak sysret_ss_attrs
bogomips : 4592.39
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
processor : 2
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-4600M APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 2
apicid : 18
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1
bugs : fxsave_leak sysret_ss_attrs
bogomips : 4592.39
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
processor : 3
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A10-4600M APU with Radeon(tm) HD Graphics
stepping : 1
microcode : 0x6001119
cpu MHz : 1400.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 2
apicid : 19
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1
bugs : fxsave_leak sysret_ss_attrs
bogomips : 4592.39
TLB size : 1536 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
$This is the output not to understanding of what it all means maybe you can break it down for me a little bit. I'm fairly familiar with Arch Linux but I have some noobieness to my qualities. I haven't really spent alot of time focusing on the more complex aspects of linux.
Offline
#4 2015-11-16 18:17:51
- pypi
- Wiki Maintainer
- Registered: 2014-04-22
- Posts: 250
Re: Still... Segmentation fault errors on several programs
useraddition wrote:
... vendor_id : AuthenticAMD cpu family : 21 model : 16 model name : AMD A10-4600M APU with Radeon(tm) HD Graphics ...
This is not an "Intel Broadwell" system. According to the wiki, you should not need any microcode packages with an AMD processor (apart from linux-firmware, that is). Installing Intel ucode packages will not help!
Otherwise, I'm not sure what you are asking.
Offline
#5 2015-11-16 18:27:12
- R00KIE
- Forum Fellow
- From: Between a computer and a chair
- Registered: 2008-09-14
- Posts: 4,734
Re: Still... Segmentation fault errors on several programs
pypi wrote:
This is not an "Intel Broadwell" system. According to the wiki, you should not need any microcode packages with an AMD processor (apart from linux-firmware, that is). Installing Intel ucode packages will not help!
Otherwise, I'm not sure what you are asking.
This is what I suspected, I saw too much AMD in the output of lspci for it to come from an Intel system. The conclusion is: intel-ucode will not work and cannot work. The problem is somewhere else.
R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K
Offline
#6 2015-11-17 05:51:32
- useraddition
- Member
- Registered: 2013-06-07
- Posts: 144
Re: Still... Segmentation fault errors on several programs
ok so i erased the boot loader entry for intel unicode so i'm thinking this mite have something with the unicode conflicting with xorg combined with catayst so here is my cat xorg log thing:
$ cat /var/log/Xorg.0.log
[ 36.308]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 36.308] X Protocol Version 11, Revision 0
[ 36.308] Build Operating System: Linux 3.17.6-1-ARCH x86_64
[ 36.308] Current Operating System: Linux krazy8957889697 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015 x86_64
[ 36.308] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda4 rw nomodeset initrd=../initramfs-linux.img
[ 36.308] Build Date: 11 February 2015 08:10:00AM
[ 36.308]
[ 36.308] Current version of pixman: 0.32.8
[ 36.308] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 36.308] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.308] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 16 21:15:59 2015
[ 36.441] (==) Using config file: "/etc/X11/xorg.conf"
[ 36.441] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 36.476] (==) ServerLayout "aticonfig Layout"
[ 36.476] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 36.476] (**) | |-->Monitor "<default monitor>"
[ 36.493] (**) | |-->Device "aticonfig-Device[0]-0"
[ 36.493] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
[ 36.493] (==) Automatically adding devices
[ 36.493] (==) Automatically enabling devices
[ 36.493] (==) Automatically adding GPU devices
[ 36.577] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 36.577] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 36.577] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 36.584] (II) Loader magic: 0x819d80
[ 36.584] (II) Module ABI versions:
[ 36.584] X.Org ANSI C Emulation: 0.4
[ 36.584] X.Org Video Driver: 18.0
[ 36.584] X.Org XInput driver : 21.0
[ 36.584] X.Org Server Extension : 8.0
[ 36.586] (EE) systemd-logind: failed to get session: PID 341 does not belong to any known session
[ 36.588] (--) PCI:*(0:0:1:0) 1002:9900:103c:18a6 rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/262144, I/O @ 0x00003000/256
[ 36.589] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 36.589] (II) "glx" will be loaded by default.
[ 36.589] (II) LoadModule: "glx"
[ 36.691] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 36.716] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 36.716] compiled for 6.9.0, module version = 1.0.0
[ 36.716] (II) LoadModule: "fglrx"
[ 36.716] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 37.159] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 37.159] compiled for 1.4.99.906, module version = 15.20.3
[ 37.159] Module class: X.Org Video Driver
[ 37.173] (II) Loading sub module "fglrxdrm"
[ 37.173] (II) LoadModule: "fglrxdrm"
[ 37.173] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 37.194] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 37.194] compiled for 1.4.99.906, module version = 15.20.3
[ 37.194] (II) AMD Proprietary Linux Driver Version Identifier:15.20.3
[ 37.194] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.201.1151
[ 37.194] (II) AMD Proprietary Linux Driver Build Date: Sep 8 2015 15:06:35
[ 37.194] (++) using VT number 7
[ 37.197] (WW) Falling back to old probe method for fglrx
[ 37.336] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 37.349] ukiDynamicMajor: failed to open /proc/ati/major
[ 37.349] ukiDynamicMajor: failed to open /proc/ati/major
[ 37.375] (--) Chipset Supported AMD Graphics Processor (0x9900) found
[ 37.385] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 37.386] (II) fglrx(0): pEnt->device->identifier=0x16c7cf0
[ 37.387] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[ 37.387] (II) fglrx(0): FB driver is not enabled
[ 37.387] (II) Loading sub module "vgahw"
[ 37.387] (II) LoadModule: "vgahw"
[ 37.387] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 37.401] (II) Module vgahw: vendor="X.Org Foundation"
[ 37.401] compiled for 1.16.4, module version = 0.1.0
[ 37.401] ABI class: X.Org Video Driver, version 18.0
[ 37.402] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 37.402] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 37.402] (==) fglrx(0): Default visual is TrueColor
[ 37.402] (==) fglrx(0): RGB weight 888
[ 37.402] (II) fglrx(0): Using 8 bits per RGB
[ 37.402] (==) fglrx(0): Buffer Tiling is ON
[ 37.409] (II) Loading sub module "fglrxdrm"
[ 37.409] (II) LoadModule: "fglrxdrm"
[ 37.410] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 37.410] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 37.410] compiled for 1.4.99.906, module version = 15.20.3
[ 37.413] ukiDynamicMajor: failed to open /proc/ati/major
[ 37.413] ukiDynamicMajor: failed to open /proc/ati/major
[ 37.414] (**) fglrx(0): NoAccel = NO
[ 37.414] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 37.414] (--) fglrx(0): Chipset: "AMD Radeon HD 7660G " (Chipset = 0x9900)
[ 37.414] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x18a6)
[ 37.414] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 37.414] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 37.414] (--) fglrx(0): MMIO registers at 0xf0300000
[ 37.414] (--) fglrx(0): I/O port at 0x00003000
[ 37.414] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 37.481] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 37.569] (II) Loading sub module "vbe"
[ 37.569] (II) LoadModule: "vbe"
[ 37.569] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 37.618] (II) Module vbe: vendor="X.Org Foundation"
[ 37.618] compiled for 1.16.4, module version = 1.1.0
[ 37.618] ABI class: X.Org Video Driver, version 18.0
[ 37.635] (II) fglrx(0): VESA BIOS detected
[ 37.635] (II) fglrx(0): VESA VBE Version 3.0
[ 37.635] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 37.635] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 37.635] (II) fglrx(0): VESA VBE OEM Software Rev: 15.22
[ 37.635] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 37.635] (II) fglrx(0): VESA VBE OEM Product: DVST
[ 37.635] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 37.646] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 37.646] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 37.646] (II) fglrx(0): PCIE card detected
[ 37.646] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 37.646] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 37.646] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 37.647] (II) fglrx(0): RandR 1.2 support is enabled!
[ 37.647] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 37.647] (II) Loading sub module "fb"
[ 37.647] (II) LoadModule: "fb"
[ 37.647] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 37.674] (II) Module fb: vendor="X.Org Foundation"
[ 37.674] compiled for 1.16.4, module version = 1.0.0
[ 37.674] ABI class: X.Org ANSI C Emulation, version 0.4
[ 37.674] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 37.674] (II) Loading sub module "ddc"
[ 37.674] (II) LoadModule: "ddc"
[ 37.674] (II) Module "ddc" already built-in
[ 38.160] (II) fglrx(0): Output LVDS using monitor section 0-LVDS
[ 38.160] (**) fglrx(0): Option "PreferredMode" "1366x768"
[ 38.160] (**) fglrx(0): Option "Position" "0 0"
[ 38.160] (**) fglrx(0): Option "Disable" "false"
[ 38.160] (**) fglrx(0): Option "Rotate" "normal"
[ 38.160] (**) fglrx(0): Option "TargetRefresh" "60"
[ 38.160] (II) fglrx(0): Output DFP1 has no monitor section
[ 38.160] (II) fglrx(0): Output CRT1 has no monitor section
[ 38.160] (II) Loading sub module "ddc"
[ 38.160] (II) LoadModule: "ddc"
[ 38.160] (II) Module "ddc" already built-in
[ 38.160] (EE) fglrx(0): Hasn't established DRM connection
[ 38.160] (WW) fglrx(0): Failed to get EDID by ACPI
[ 38.160] (II) fglrx(0): Connected Display0: LVDS
[ 38.161] (II) fglrx(0): Display0 EDID data ---------------------------
[ 38.161] (II) fglrx(0): Manufacturer: AUO Model: 32ec Serial#: 0
[ 38.161] (II) fglrx(0): Year: 2011 Week: 0
[ 38.161] (II) fglrx(0): EDID Version: 1.4
[ 38.161] (II) fglrx(0): Digital Display Input
[ 38.161] (II) fglrx(0): 6 bits per channel
[ 38.161] (II) fglrx(0): Digital interface is undefined
[ 38.161] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 38.161] (II) fglrx(0): Gamma: 2.20
[ 38.161] (II) fglrx(0): No DPMS capabilities specified
[ 38.161] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[ 38.161] (II) fglrx(0): First detailed timing is preferred mode
[ 38.161] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 38.161] (II) fglrx(0): redX: 0.580 redY: 0.335 greenX: 0.330 greenY: 0.565
[ 38.161] (II) fglrx(0): blueX: 0.155 blueY: 0.140 whiteX: 0.313 whiteY: 0.329
[ 38.161] (II) fglrx(0): Manufacturer's mask: 0
[ 38.161] (II) fglrx(0): Supported detailed timing:
[ 38.161] (II) fglrx(0): clock: 76.3 MHz Image Size: 344 x 193 mm
[ 38.161] (II) fglrx(0): h_active: 1366 h_sync: 1374 h_sync_end 1384 h_blank_end 1558 h_border: 0
[ 38.161] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 772 v_blanking: 816 v_border: 0
[ 38.161] (II) fglrx(0): Supported detailed timing:
[ 38.161] (II) fglrx(0): clock: 50.9 MHz Image Size: 344 x 193 mm
[ 38.161] (II) fglrx(0): h_active: 1366 h_sync: 1374 h_sync_end 1384 h_blank_end 1558 h_border: 0
[ 38.161] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 772 v_blanking: 816 v_border: 0
[ 38.161] (II) fglrx(0): Unknown vendor-specific block 2
[ 38.161] (II) fglrx(0): EDID (in hex):
[ 38.161] (II) fglrx(0): 00ffffffffffff0006afec3200000000
[ 38.161] (II) fglrx(0): 001501049022137802bbf59455549027
[ 38.161] (II) fglrx(0): 23505400000001010101010101010101
[ 38.161] (II) fglrx(0): 010101010101ce1d56c050003030080a
[ 38.161] (II) fglrx(0): 310058c110000018df1356c050003030
[ 38.161] (II) fglrx(0): 080a310058c110000018000000000000
[ 38.161] (II) fglrx(0): 00000000000000000000000000000002
[ 38.161] (II) fglrx(0): 000c33f90a3c641f14226e20202000e7
[ 38.161] (II) fglrx(0): End of Display0 EDID data --------------------
[ 38.161] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[ 38.163] (EE) fglrx(0): Hasn't established DRM connection
[ 38.163] (WW) fglrx(0): Failed to get EDID by ACPI
[ 38.163] (II) fglrx(0): EDID for output LVDS
[ 38.163] (II) fglrx(0): Manufacturer: AUO Model: 32ec Serial#: 0
[ 38.163] (II) fglrx(0): Year: 2011 Week: 0
[ 38.163] (II) fglrx(0): EDID Version: 1.4
[ 38.163] (II) fglrx(0): Digital Display Input
[ 38.163] (II) fglrx(0): 6 bits per channel
[ 38.163] (II) fglrx(0): Digital interface is undefined
[ 38.163] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 38.163] (II) fglrx(0): Gamma: 2.20
[ 38.163] (II) fglrx(0): No DPMS capabilities specified
[ 38.163] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[ 38.163] (II) fglrx(0): First detailed timing is preferred mode
[ 38.163] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 38.163] (II) fglrx(0): redX: 0.580 redY: 0.335 greenX: 0.330 greenY: 0.565
[ 38.163] (II) fglrx(0): blueX: 0.155 blueY: 0.140 whiteX: 0.313 whiteY: 0.329
[ 38.163] (II) fglrx(0): Manufacturer's mask: 0
[ 38.163] (II) fglrx(0): Supported detailed timing:
[ 38.163] (II) fglrx(0): clock: 76.3 MHz Image Size: 344 x 193 mm
[ 38.163] (II) fglrx(0): h_active: 1366 h_sync: 1374 h_sync_end 1384 h_blank_end 1558 h_border: 0
[ 38.163] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 772 v_blanking: 816 v_border: 0
[ 38.163] (II) fglrx(0): Supported detailed timing:
[ 38.163] (II) fglrx(0): clock: 50.9 MHz Image Size: 344 x 193 mm
[ 38.163] (II) fglrx(0): h_active: 1366 h_sync: 1374 h_sync_end 1384 h_blank_end 1558 h_border: 0
[ 38.163] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 772 v_blanking: 816 v_border: 0
[ 38.163] (II) fglrx(0): Unknown vendor-specific block 2
[ 38.163] (II) fglrx(0): EDID (in hex):
[ 38.163] (II) fglrx(0): 00ffffffffffff0006afec3200000000
[ 38.163] (II) fglrx(0): 001501049022137802bbf59455549027
[ 38.163] (II) fglrx(0): 23505400000001010101010101010101
[ 38.164] (II) fglrx(0): 010101010101ce1d56c050003030080a
[ 38.164] (II) fglrx(0): 310058c110000018df1356c050003030
[ 38.164] (II) fglrx(0): 080a310058c110000018000000000000
[ 38.164] (II) fglrx(0): 00000000000000000000000000000002
[ 38.164] (II) fglrx(0): 000c33f90a3c641f14226e20202000e7
[ 38.164] (II) fglrx(0): EDID vendor "AUO", prod id 13036
[ 38.164] (II) fglrx(0): Printing DDC gathered Modelines:
[ 38.164] (II) fglrx(0): Modeline "1366x768"x0.0 76.30 1366 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz eP)
[ 38.164] (II) fglrx(0): Modeline "1366x768"x0.0 50.87 1366 1374 1384 1558 768 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): User Preference Output LVDS using refresh rate 60.0 Hz.
[ 38.164] (II) fglrx(0): Printing probed modes for output LVDS
[ 38.164] (II) fglrx(0): Modeline "1366x768"x60.0 76.30 1366 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz UeP)
[ 38.164] (II) fglrx(0): Modeline "1366x768"x40.0 50.87 1366 1374 1384 1558 768 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "1360x768"x60.0 76.30 1360 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "1360x768"x40.0 50.87 1360 1374 1384 1558 768 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "1280x768"x60.0 76.30 1280 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "1280x768"x40.0 50.87 1280 1374 1384 1558 768 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "1280x720"x60.0 76.30 1280 1374 1384 1558 720 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "1280x720"x40.0 50.87 1280 1374 1384 1558 720 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "1024x768"x60.0 76.30 1024 1374 1384 1558 768 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "1024x768"x40.0 50.87 1024 1374 1384 1558 768 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "1024x600"x60.0 76.30 1024 1374 1384 1558 600 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "1024x600"x40.0 50.87 1024 1374 1384 1558 600 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "800x600"x60.0 76.30 800 1374 1384 1558 600 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "800x600"x40.0 50.87 800 1374 1384 1558 600 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "720x576"x60.0 76.30 720 1374 1384 1558 576 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "720x576"x40.0 50.87 720 1374 1384 1558 576 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "848x480"x60.0 76.30 848 1374 1384 1558 480 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "848x480"x40.0 50.87 848 1374 1384 1558 480 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "800x480"x60.0 76.30 800 1374 1384 1558 480 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "800x480"x40.0 50.87 800 1374 1384 1558 480 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "720x480"x60.0 76.30 720 1374 1384 1558 480 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "720x480"x40.0 50.87 720 1374 1384 1558 480 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): Modeline "640x480"x60.0 76.30 640 1374 1384 1558 480 771 772 816 -hsync -vsync (49.0 kHz e)
[ 38.164] (II) fglrx(0): Modeline "640x480"x40.0 50.87 640 1374 1384 1558 480 771 772 816 -hsync -vsync (32.7 kHz e)
[ 38.164] (II) fglrx(0): EDID for output DFP1
[ 38.164] (II) fglrx(0): EDID for output CRT1
[ 38.164] (II) fglrx(0): Output LVDS connected
[ 38.164] (II) fglrx(0): Output DFP1 disconnected
[ 38.164] (II) fglrx(0): Output CRT1 disconnected
[ 38.164] (II) fglrx(0): Using user preference for initial modes
[ 38.164] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 38.165] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 38.165] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 38.165] (II) fglrx(0): DPI set to (102, 102)
[ 38.165] (II) fglrx(0): Eyefinity capable adapter detected.
[ 38.165] (II) fglrx(0): Adapter AMD Radeon HD 7660G has 4 configurable heads and 1 displays connected.
[ 38.165] (==) fglrx(0): PseudoColor visuals disabled
[ 38.165] (II) Loading sub module "ramdac"
[ 38.165] (II) LoadModule: "ramdac"
[ 38.165] (II) Module "ramdac" already built-in
[ 38.165] (==) fglrx(0): NoDRI = NO
[ 38.165] (==) fglrx(0): Capabilities: 0x00000000
[ 38.165] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 38.165] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 38.165] (==) fglrx(0): UseFastTLS=0
[ 38.165] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 38.165] (--) Depth 24 pixmap format is 32 bpp
[ 38.166] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible.
[ 38.166] (WW) fglrx(0): ***********************************************************
[ 38.166] (WW) fglrx(0): * DRI initialization failed *
[ 38.166] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 38.166] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 38.166] (WW) fglrx(0): ***********************************************************
[ 38.192] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[ 38.203] (II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
[ 38.203] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1600) (front color buffer - assumption)
[ 38.203] (II) fglrx(0): Largest offscreen area available: 1600 x 6591
[ 38.205] (==) fglrx(0): Backing store enabled
[ 38.206] (==) fglrx(0): DPMS enabled
[ 38.206] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 38.206] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 38.206] (II) LoadModule: "glesx"
[ 38.207] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 38.404] (II) Module glesx: vendor="X.Org Foundation"
[ 38.404] compiled for 1.4.99.906, module version = 1.0.0
[ 38.404] (II) fglrx(0): GLESX enableFlags = 8768
[ 38.412] (II) fglrx(0): Enable composite support successfully
[ 38.413] (==) fglrx(0): Silken mouse enabled
[ 38.428] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 38.429] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 38.441] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 38.441] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 39.542] (--) RandR disabled
[ 39.570] (II) AIGLX: Screen 0 is not DRI capable
[ 39.570] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[ 39.570] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 40.135] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 40.135] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 40.135] (II) LoadModule: "evdev"
[ 40.135] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.175] (II) Module evdev: vendor="X.Org Foundation"
[ 40.175] compiled for 1.16.2, module version = 2.9.1
[ 40.175] Module class: X.Org XInput Driver
[ 40.175] ABI class: X.Org XInput driver, version 21.0
[ 40.175] (II) Using input driver 'evdev' for 'Power Button'
[ 40.175] (**) Power Button: always reports core events
[ 40.175] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 40.175] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 40.176] (--) evdev: Power Button: Found keys
[ 40.176] (II) evdev: Power Button: Configuring as keyboard
[ 40.176] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[ 40.176] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 40.176] (**) Option "xkb_rules" "evdev"
[ 40.176] (**) Option "xkb_model" "pc104"
[ 40.176] (**) Option "xkb_layout" "us"
[ 40.214] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 40.214] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 40.214] (II) Using input driver 'evdev' for 'Video Bus'
[ 40.214] (**) Video Bus: always reports core events
[ 40.214] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 40.214] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 40.214] (--) evdev: Video Bus: Found keys
[ 40.214] (II) evdev: Video Bus: Configuring as keyboard
[ 40.214] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event7"
[ 40.214] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 40.214] (**) Option "xkb_rules" "evdev"
[ 40.214] (**) Option "xkb_model" "pc104"
[ 40.214] (**) Option "xkb_layout" "us"
[ 40.215] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 40.215] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 40.215] (II) Using input driver 'evdev' for 'Power Button'
[ 40.215] (**) Power Button: always reports core events
[ 40.215] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 40.215] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 40.215] (--) evdev: Power Button: Found keys
[ 40.215] (II) evdev: Power Button: Configuring as keyboard
[ 40.215] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[ 40.215] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 40.215] (**) Option "xkb_rules" "evdev"
[ 40.215] (**) Option "xkb_model" "pc104"
[ 40.216] (**) Option "xkb_layout" "us"
[ 40.217] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 40.217] (II) No input driver specified, ignoring this device.
[ 40.217] (II) This device may have been added with another device file.
[ 40.217] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[ 40.217] (II) No input driver specified, ignoring this device.
[ 40.217] (II) This device may have been added with another device file.
[ 40.218] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 40.219] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 40.219] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 40.219] (**) Logitech USB Receiver: always reports core events
[ 40.219] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 40.219] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 40.219] (--) evdev: Logitech USB Receiver: Found keys
[ 40.219] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 40.219] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:046D:C52E.0001/input/input2/event1"
[ 40.219] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 40.219] (**) Option "xkb_rules" "evdev"
[ 40.219] (**) Option "xkb_model" "pc104"
[ 40.219] (**) Option "xkb_layout" "us"
[ 40.220] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 40.220] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 40.220] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 40.220] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 40.220] (**) Logitech USB Receiver: always reports core events
[ 40.220] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 40.220] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 40.220] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 40.220] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 40.220] (--) evdev: Logitech USB Receiver: Found relative axes
[ 40.220] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 40.220] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 40.220] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 40.220] (--) evdev: Logitech USB Receiver: Found keys
[ 40.220] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 40.220] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 40.220] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 40.220] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 40.220] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 40.220] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:046D:C52E.0002/input/input3/event2"
[ 40.220] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 40.220] (**) Option "xkb_rules" "evdev"
[ 40.220] (**) Option "xkb_model" "pc104"
[ 40.220] (**) Option "xkb_layout" "us"
[ 40.221] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 40.221] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 40.221] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 40.221] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 40.221] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 40.221] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 40.221] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 40.221] (II) No input driver specified, ignoring this device.
[ 40.221] (II) This device may have been added with another device file.
[ 40.222] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event16)
[ 40.222] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[ 40.222] (II) Using input driver 'evdev' for 'HP Truevision HD'
[ 40.222] (**) HP Truevision HD: always reports core events
[ 40.222] (**) evdev: HP Truevision HD: Device: "/dev/input/event16"
[ 40.222] (--) evdev: HP Truevision HD: Vendor 0x64e Product 0xc336
[ 40.222] (--) evdev: HP Truevision HD: Found keys
[ 40.222] (II) evdev: HP Truevision HD: Configuring as keyboard
[ 40.222] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input17/event16"
[ 40.222] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 11)
[ 40.222] (**) Option "xkb_rules" "evdev"
[ 40.222] (**) Option "xkb_model" "pc104"
[ 40.222] (**) Option "xkb_layout" "us"
[ 40.222] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 40.222] (II) No input driver specified, ignoring this device.
[ 40.222] (II) This device may have been added with another device file.
[ 40.223] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event13)
[ 40.223] (II) No input driver specified, ignoring this device.
[ 40.223] (II) This device may have been added with another device file.
[ 40.223] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event14)
[ 40.223] (II) No input driver specified, ignoring this device.
[ 40.223] (II) This device may have been added with another device file.
[ 40.223] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 40.223] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 40.223] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 40.223] (**) AT Translated Set 2 keyboard: always reports core events
[ 40.223] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 40.223] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 40.223] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 40.223] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 40.223] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 40.223] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 40.223] (**) Option "xkb_rules" "evdev"
[ 40.223] (**) Option "xkb_model" "pc104"
[ 40.223] (**) Option "xkb_layout" "us"
[ 40.224] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 40.224] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 40.224] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 40.224] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 40.224] (II) LoadModule: "synaptics"
[ 40.224] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 40.232] (II) Module synaptics: vendor="X.Org Foundation"
[ 40.232] compiled for 1.16.0, module version = 1.8.1
[ 40.232] Module class: X.Org XInput Driver
[ 40.232] ABI class: X.Org XInput driver, version 21.0
[ 40.232] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 40.232] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 40.232] (**) Option "Device" "/dev/input/event15"
[ 40.297] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1258 - 5684 (res 47)
[ 40.297] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 992 - 4862 (res 92)
[ 40.297] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 40.297] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 40.297] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 40.297] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 40.297] (**) Option "TapButton1" "1"
[ 40.297] (**) Option "TapButton2" "2"
[ 40.297] (**) Option "TapButton3" "3"
[ 40.297] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 40.297] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 40.340] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event15"
[ 40.340] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 40.340] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 40.340] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 40.340] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034
[ 40.340] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 40.340] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 40.340] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 40.340] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 40.341] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 40.341] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 40.341] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 40.342] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event9)
[ 40.342] (II) No input driver specified, ignoring this device.
[ 40.342] (II) This device may have been added with another device file.
[ 40.343] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 40.343] (II) No input driver specified, ignoring this device.
[ 40.343] (II) This device may have been added with another device file.
[ 40.343] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 40.343] (II) No input driver specified, ignoring this device.
[ 40.343] (II) This device may have been added with another device file.
[ 40.344] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event10)
[ 40.344] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 40.344] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 40.345] (**) HP WMI hotkeys: always reports core events
[ 40.345] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event10"
[ 40.345] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 40.345] (--) evdev: HP WMI hotkeys: Found keys
[ 40.345] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 40.345] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event10"
[ 40.345] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 40.345] (**) Option "xkb_rules" "evdev"
[ 40.345] (**) Option "xkb_model" "pc104"
[ 40.345] (**) Option "xkb_layout" "us"
[ 40.346] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event3)
[ 40.346] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[ 40.346] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[ 40.346] (**) HP Wireless hotkeys: always reports core events
[ 40.346] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event3"
[ 40.346] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[ 40.346] (--) evdev: HP Wireless hotkeys: Found keys
[ 40.346] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[ 40.346] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event3"
[ 40.346] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 15)
[ 40.346] (**) Option "xkb_rules" "evdev"
[ 40.346] (**) Option "xkb_model" "pc104"
[ 40.346] (**) Option "xkb_layout" "us"
[ 40.351] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
$After scrolling thrw all that junk i couldn't find anything on microcode unless i midded something i probably did i hope this is fixed in the next update for xorg catalyst compatable.
Offline
#7 2015-11-17 06:05:46
- pypi
- Wiki Maintainer
- Registered: 2014-04-22
- Posts: 250
Re: Still... Segmentation fault errors on several programs
According to the wiki, the catalyst package is no longer in the official repos - you should be using a package from the AUR (or an unofficial repo).
I suspect that you have done some kind of partial upgrade, to start with; please update using 'pacman -Syu' and then update and packages from the AUR, including catalyst. If that doesn't fix the issues, what programs segfault?
You should probably double check that you haven't missed something in the instructions on the wiki.
Personally, I'm not sure why programs would start to segfault because of catalyst. If you really think that catalyst is part of the issue, have you tried the FOSS drivers? That would help narrow it down.
Offline