You are not logged in.

Pages: 1

#1 2015-11-29 16:16:36

louiswi
Member
Registered: 2015-11-29
Posts: 7

[solved]After install nvidia driver,Ican not start kde

intel gpu + nvidia 765m ,latest system
I installed nvidia-358.16 ,
xconfig:

Section "Module"
    Load "modesetting"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "<00:01:00:00>"
    Option "AllowEmptyInitialConfiguration"
EndSection

but can't start kde
Only if I uninstall nvidia driver,can I start kde in intel gpu.
xorg log:

    [26.633] 
X.Org X Server 1.18.0
Release Date: 2015-11-09
[    26.633] X Protocol Version 11, Revision 0
[    26.633] Build Operating System: Linux 4.2.3-1-ARCH x86_64 
[    26.633] Current Operating System: Linux louiswi-pc 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015 x86_64
[    26.633] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=306dc475-3a80-46f8-b1fd-59e63bcae459 rw quiet
[    26.633] Build Date: 18 November 2015  08:07:09AM
[    26.633]  
[    26.633] Current version of pixman: 0.32.8
[    26.633] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    26.633] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    26.633] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 29 22:23:54 2015
[    26.829] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    26.912] (==) No Layout section.  Using the first Screen section.
[    26.912] (==) No screen section available. Using defaults.
[    26.912] (**) |-->Screen "Default Screen Section" (0)
[    26.912] (**) |   |-->Monitor "<default monitor>"
[    26.928] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    26.928] (==) Automatically adding devices
[    26.928] (==) Automatically enabling devices
[    26.928] (==) Automatically adding GPU devices
[    26.928] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    26.997] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    26.997] 	Entry deleted from font path.
[    27.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    27.005] 	Entry deleted from font path.
[    27.005] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    27.038] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    27.038] 	Entry deleted from font path.
[    27.038] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    27.038] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    27.038] (==) ModulePath set to "/usr/lib/xorg/modules"
[    27.038] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    27.038] (II) Loader magic: 0x819d40
[    27.038] (II) Module ABI versions:
[    27.038] 	X.Org ANSI C Emulation: 0.4
[    27.038] 	X.Org Video Driver: 20.0
[    27.038] 	X.Org XInput driver : 22.1
[    27.038] 	X.Org Server Extension : 9.0
[    27.039] (++) using VT number 1[/b]

[b][    27.039] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    27.039] (II) xfree86: Adding drm device (/dev/dri/card1)
[    27.039] (II) xfree86: Adding drm device (/dev/dri/card0)
[    27.040] (--) PCI:*(0:0:2:0) 8086:0416:1558:3537 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    27.040] (--) PCI: (0:1:0:0) 10de:11e2:1558:3537 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    27.040] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    27.046] (II) LoadModule: "glx"
[    27.132] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    29.353] (II) Module glx: vendor="NVIDIA Corporation"
[    29.353] 	compiled for 4.0.2, module version = 1.0.0
[    29.353] 	Module class: X.Org Server Extension
[    29.362] (II) NVIDIA GLX Module  358.16  Mon Nov 16 18:54:01 PST 2015
[    29.370] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    29.370] 	loading driver: nvidia
[    29.370] (==) Matched intel as autoconfigured driver 0
[    29.370] (==) Matched nvidia as autoconfigured driver 1
[    29.370] (==) Matched nouveau as autoconfigured drive2
[    29.370] (==) Matched intel as autoconfigured driver 4
[    29.370] (==) Matched modesetting as autoconfigured driver 5
[    29.370] (==) Matched fbdev as autoconfigured driver 6
[    29.370] (==) Matched vesa as autoconfigured driver 7
[    29.370] (==) Assigned the driver to the xf86ConfigLayout
[    29.370] (II) LoadModule: "intel"
[    29.381] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    29.562] (II) Module intel: vendor="X.Org Foundation"
[    29.562]     compiled for 1.18.0, module version = 2.99.917
[    29.562]     Module class: X.Org Video Driver
[    29.562]     ABI class: X.Org Video Driver, version 20.0
[    29.562] (II) LoadModule: "nvidia"
[    29.562] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    29.642] (II) Module nvidia: vendor="NVIDIA Corporation"
[    29.642]     compiled for 4.0.2, module version = 1.0.0
[    29.642]     Module class: X.Org Video Driver
[    29.652] (II) LoadModule: "nouveau"
[    29.652] (WW) Warning, couldn't open module nouveau
[    29.652] (II) UnloadModule: "nouveau"
[    29.652] (II) Unloading nouveau
[    29.652] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    29.652] (II) LoadModule: "nv"
[    29.652] (WW) Warning, couldn't open module nv
[    29.652] (II) UnloadModule: "nv"
[    29.652] (II) Unloading nv
[    29.652] (EE) Failed to load module "nv" (module does not exist, 0)
[    29.652] (II) LoadModule: "modesetting"
[    29.652] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    29.659] (II) Module modesetting: vendor="X.Org Foundation"
[    29.659]     compiled for 1.18.0, module version = 1.18.0
[    29.659]     Module class: X.Org Video Driver
[    29.659]     ABI class: X.Org Video Driver, version 20.0
[    29.659] (II) LoadModule: "fbdev"
[    29.659] (WW) Warning, couldn't open module fbdev
[    29.659] (II) UnloadModule: "fbdev"
[    29.659] (II) Unloading fbdev
[    29.659] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    29.659] (II) LoadModule: "vesa"
[    29.659] (WW) Warning, couldn't open module vesa
[    29.659] (II) UnloadModule: "vesa"
[    29.659] (II) Unloading vesa
[    29.659] (EE) Failed to load module "vesa" (module does not exist, 0)
[    29.659] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    29.659] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    29.659] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    29.659] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    29.659] (II) NVIDIA dlloader X Driver  358.16  Mon Nov 16 18:32:40 PST 2015
[    29.659] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    29.660] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    29.666] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150522
[    29.666] (II) intel(0): SNA compiled from 2.99.917-478-gdf72bc5
[    29.669] (WW) Falling back to old probe method for modesetting
[    29.670] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[    29.670] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[    29.670] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    29.670] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    29.670] (==) intel(0): RGB weight 888
[    29.670] (==) intel(0): Default visual is TrueColor
[    29.670] (II) intel(0): Output eDP1 has no monitor section
[    29.693] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    29.693] (II) intel(0): Enabled output eDP1
[    29.693] (II) intel(0): Output VGA1 has

Last edited by louiswi (2015-12-03 05:22:16)

Offline

#2 2015-11-29 16:21:44

louiswi
Member
Registered: 2015-11-29
Posts: 7

Re: [solved]After install nvidia driver,Ican not start kde

busid 00:01:00:00 or pci:01:00:00

Last edited by louiswi (2015-11-29 16:41:18)

Offline

#3 2015-11-29 16:26:16

Xabre
Member
From: Serbia
Registered: 2009-03-19
Posts: 757

Re: [solved]After install nvidia driver,Ican not start kde

https://wiki.archlinux.org/index.php/NVIDIA_Optimus

And please use the code tag.

Offline

#4 2015-11-29 16:41:12

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,720

Re: [solved]After install nvidia driver,Ican not start kde

To elaborate on what Xabre suggested, please use BBCode code tags around program output and file contents.   It places it is a scroll box with fixed pitch fonts.  You readers will appreciate it.   Also, the BBCode link I have provided is under ever message post box on the forums.

Thanks

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

#5 2015-11-29 16:43:52

louiswi
Member
Registered: 2015-11-29
Posts: 7

Re: [solved]After install nvidia driver,Ican not start kde

ewaller wrote:

To elaborate on what Xabre suggested, please use BBCode code tags around program output and file contents.   It places it is a scroll box with fixed pitch fonts.  You readers will appreciate it.   Also, the BBCode link I have provided is under ever message post box on the forums.

Thanks

Ok,thanks

Offline

#6 2015-11-29 16:45:35

louiswi
Member
Registered: 2015-11-29
Posts: 7

Re: [solved]After install nvidia driver,Ican not start kde

Xabre wrote:

Thanks
Is busid  00:01:00:00 or pci:01:00:00

Last edited by louiswi (2015-11-29 16:53:14)

Offline

#7 2015-11-29 17:06:13

Xabre
Member
From: Serbia
Registered: 2009-03-19
Posts: 757

Re: [solved]After install nvidia driver,Ican not start kde

What does your

lspci | grep -E "VGA|3D"

say?

Wiki page is pretty straightforward.

Offline

#8 2015-11-30 03:07:12

louiswi
Member
Registered: 2015-11-29
Posts: 7

Re: [solved]After install nvidia driver,Ican not start kde

Xabre wrote:

What does your

lspci | grep -E "VGA|3D"

say?

Wiki page is pretty straightforward.

It doesn't work.

 lspci | grep -E "VGA|3D"
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)

xorg.log

[    25.560] 
X.Org X Server 1.18.0
Release Date: 2015-11-09
[    25.560] X Protocol Version 11, Revision 0
[    25.560] Build Operating System: Linux 4.2.3-1-ARCH x86_64 
[    25.560] Current Operating System: Linux louiswi-pc 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015 x86_64
[    25.560] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=306dc475-3a80-46f8-b1fd-59e63bcae459 rw quiet
[    25.560] Build Date: 18 November 2015  08:07:09AM
[    25.560]  
[    25.560] Current version of pixman: 0.32.8
[    25.560] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    25.560] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.560] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 30 10:25:18 2015
[    25.630] (==) Using config file: "/etc/X11/xorg.conf"
[    25.630] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.752] (==) ServerLayout "layout"
[    25.752] (**) |-->Screen "nvidia" (0)
[    25.752] (**) |   |-->Monitor "<default monitor>"
[    25.762] (**) |   |-->Device "nvidia"
[    25.762] (**) |   |-->GPUDevice "intel"
[    25.762] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[    25.762] (**) |-->Inactive Device "intel"
[    25.762] (==) Automatically adding devices
[    25.762] (==) Automatically enabling devices
[    25.762] (==) Automatically adding GPU devices
[    25.762] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    25.873] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    25.873] 	Entry deleted from font path.
[    25.887] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    25.887] 	Entry deleted from font path.
[    25.887] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    25.887] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    25.887] 	Entry deleted from font path.
[    25.887] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    25.887] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    25.887] (==) ModulePath set to "/usr/lib/xorg/modules"
[    25.887] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.887] (II) Loader magic: 0x819d40
[    25.887] (II) Module ABI versions:
[    25.887] 	X.Org ANSI C Emulation: 0.4
[    25.887] 	X.Org Video Driver: 20.0
[    25.887] 	X.Org XInput driver : 22.1
[    25.887] 	X.Org Server Extension : 9.0
[    25.888] (++) using VT number 1

[    25.888] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    25.888] (II) xfree86: Adding drm device (/dev/dri/card1)
[    25.888] (II) xfree86: Adding drm device (/dev/dri/card0)
[    25.889] (--) PCI:*(0:0:2:0) 8086:0416:1558:3537 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    25.889] (--) PCI: (0:1:0:0) 10de:11e2:1558:3537 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    25.889] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    25.897] (II) LoadModule: "glx"
[    26.021] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    27.456] (II) Module glx: vendor="NVIDIA Corporation"
[    27.456] 	compiled for 4.0.2, module version = 1.0.0
[    27.456] 	Module class: X.Org Server Extension
[    27.486] (II) NVIDIA GLX Module  358.16  Mon Nov 16 18:54:01 PST 2015
[    27.496] (II) LoadModule: "nvidia"
[    27.506] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    27.657] (II) Module nvidia: vendor="NVIDIA Corporation"
[    27.657] 	compiled for 4.0.2, module version = 1.0.0
[    27.657] 	Module class: X.Org Video Driver
[    27.668] (II) LoadModule: "modesetting"
[    27.668] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    27.684] (II) Module modesetting: vendor="X.Org Foundation"
[    27.684] 	compiled for 1.18.0, module version = 1.18.0
[    27.684] 	Module class: X.Org Video Driver
[    27.684] 	ABI class: X.Org Video Driver, version 20.0
[    27.684] (II) NVIDIA dlloader X Driver  358.16  Mon Nov 16 18:32:40 PST 2015
[    27.684] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    27.696] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    27.696] (II) Loading sub module "fb"
[    27.696] (II) LoadModule: "fb"
[    27.696] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.713] (II) Module fb: vendor="X.Org Foundation"
[    27.713] 	compiled for 1.18.0, module version = 1.0.0
[    27.713] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    27.713] (II) Loading sub module "wfb"
[    27.713] (II) LoadModule: "wfb"
[    27.713] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    27.731] (II) Module wfb: vendor="X.Org Foundation"
[    27.731] 	compiled for 1.18.0, module version = 1.0.0
[    27.731] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    27.731] (II) Loading sub module "ramdac"
[    27.731] (II) LoadModule: "ramdac"
[    27.731] (II) Module "ramdac" already built-in
[    27.786] (II) modeset(1): using drv /dev/dri/card0
[    27.786] (EE) Screen 1 deleted because of no matching config section.
[    27.786] (II) UnloadModule: "modesetting"
[    27.786] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"nvidia" for depth/fbbpp 24/32
[    27.786] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    27.786] (==) NVIDIA(0): RGB weight 888
[    27.786] (==) NVIDIA(0): Default visual is TrueColor
[    27.786] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    27.804] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "Yes"
[    27.804] (**) NVIDIA(0): Enabling 2D acceleration
[    28.347] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[    28.348] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 765M (GK106) at PCI:1:0:0 (GPU-0)
[    28.348] (--) NVIDIA(0): Memory: 2097152 kBytes
[    28.348] (--) NVIDIA(0): VideoBIOS: 80.06.51.00.17
[    28.348] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    28.348] (II) NVIDIA(0): Validated MetaModes:
[    28.348] (II) NVIDIA(0):     "NULL"
[    28.348] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    28.348] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    28.348] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    28.348] (--) Depth 24 pixmap format is 32 bpp
[    28.349] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    28.349] (II) NVIDIA:     access.
[    28.353] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    28.353] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    28.353] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    28.353] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    28.353] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    28.353] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    28.353] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    28.353] (II) NVIDIA(0):     Config Options in the README.
[    28.396] (II) NVIDIA(0): Setting mode "NULL"
[    28.451] (==) NVIDIA(0): Disabling shared memory pixmaps
[    28.451] (==) NVIDIA(0): Backing store enabled
[    28.451] (==) NVIDIA(0): Silken mouse enabled
[    28.453] (==) NVIDIA(0): DPMS enabled
[    28.453] (II) Loading sub module "dri2"
[    28.453] (II) LoadModule: "dri2"
[    28.453] (II) Module "dri2" already built-in
[    28.453] (II) NVIDIA(0): [DRI2] Setup complete
[    28.453] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    28.453] (--) RandR disabled
[    28.457] (II) Initializing extension GLX
[    28.457] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event3)
[    29.006] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.006] (II) LoadModule: "evdev"
[    29.006] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.032] (II) Module evdev: vendor="X.Org Foundation"
[    29.032] 	compiled for 1.18.0, module version = 2.10.0
[    29.032] 	Module class: X.Org XInput Driver
[    29.032] 	ABI class: X.Org XInput driver, version 22.1
[    29.032] (II) Using input driver 'evdev' for 'Power Button'
[    29.032] (**) Power Button: always reports core events
[    29.032] (**) evdev: Power Button: Device: "/dev/input/event3"
[    29.032] (--) evdev: Power Button: Vendor 0 Product 0x1
[    29.032] (--) evdev: Power Button: Found keys
[    29.032] (II) evdev: Power Button: Configuring as keyboard
[    29.032] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    29.032] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    29.032] (**) Option "xkb_rules" "evdev"
[    29.033] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    29.033] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    29.033] (II) Using input driver 'evdev' for 'Video Bus'
[    29.033] (**) Video Bus: always reports core events
[    29.033] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    29.033] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    29.033] (--) evdev: Video Bus: Found keys
[    29.033] (II) evdev: Video Bus: Configuring as keyboard
[    29.033] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[    29.033] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    29.033] (**) Option "xkb_rules" "evdev"
[    29.033] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    29.033] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    29.033] (II) Using input driver 'evdev' for 'Video Bus'
[    29.033] (**) Video Bus: always reports core events
[    29.033] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    29.033] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    29.033] (--) evdev: Video Bus: Found keys
[    29.033] (II) evdev: Video Bus: Configuring as keyboard
[    29.033] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4f/LNXVIDEO:00/input/input4/event4"
[    29.033] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    29.033] (**) Option "xkb_rules" "evdev"
[    29.033] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    29.033] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.033] (II) Using input driver 'evdev' for 'Power Button'
[    29.033] (**) Power Button: always reports core events
[    29.033] (**) evdev: Power Button: Device: "/dev/input/event0"
[    29.034] (--) evdev: Power Button: Vendor 0 Product 0x1
[    29.034] (--) evdev: Power Button: Found keys
[    29.034] (II) evdev: Power Button: Configuring as keyboard
[    29.034] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    29.034] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    29.034] (**) Option "xkb_rules" "evdev"
[    29.034] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    29.034] (II) No input driver specified, ignoring this device.
[    29.034] (II) This device may have been added with another device file.
[    29.034] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    29.034] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    29.034] (II) Using input driver 'evdev' for 'Sleep Button'
[    29.034] (**) Sleep Button: always reports core events
[    29.034] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    29.034] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    29.034] (--) evdev: Sleep Button: Found keys
[    29.034] (II) evdev: Sleep Button: Configuring as keyboard
[    29.034] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    29.034] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    29.034] (**) Option "xkb_rules" "evdev"
[    29.034] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[    29.034] (II) No input driver specified, ignoring this device.
[    29.034] (II) This device may have been added with another device file.
[    29.035] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[    29.035] (II) No input driver specified, ignoring this device.
[    29.035] (II) This device may have been added with another device file.
[    29.035] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[    29.035] (II) No input driver specified, ignoring this device.
[    29.035] (II) This device may have been added with another device file.
[    29.035] (II) config/udev: Adding input device 2.4G Wireless Keyboard&Mouse (/dev/input/event7)
[    29.035] (**) 2.4G Wireless Keyboard&Mouse: Applying InputClass "evdev keyboard catchall"
[    29.035] (II) Using input driver 'evdev' for '2.4G Wireless Keyboard&Mouse'
[    29.035] (**) 2.4G Wireless Keyboard&Mouse: always reports core events
[    29.035] (**) evdev: 2.4G Wireless Keyboard&Mouse: Device: "/dev/input/event7"
[    29.035] (--) evdev: 2.4G Wireless Keyboard&Mouse: Vendor 0x40b Product 0x2013
[    29.035] (--) evdev: 2.4G Wireless Keyboard&Mouse: Found keys
[    29.035] (II) evdev: 2.4G Wireless Keyboard&Mouse: Configuring as keyboard
[    29.035] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:040B:2013.0001/input/input11/event7"
[    29.035] (II) XINPUT: Adding extended input device "2.4G Wireless Keyboard&Mouse" (type: KEYBOARD, id 11)
[    29.035] (**) Option "xkb_rules" "evdev"
[    29.035] (II) config/udev: Adding input device 2.4G Wireless Keyboard&Mouse (/dev/input/event8)
[    29.036] (**) 2.4G Wireless Keyboard&Mouse: Applying InputClass "evdev pointer catchall"
[    29.036] (**) 2.4G Wireless Keyboard&Mouse: Applying InputClass "evdev keyboard catchall"
[    29.036] (II) Using input driver 'evdev' for '2.4G Wireless Keyboard&Mouse'
[    29.036] (**) 2.4G Wireless Keyboard&Mouse: always reports core events
[    29.036] (**) evdev: 2.4G Wireless Keyboard&Mouse: Device: "/dev/input/event8"
[    29.036] (--) evdev: 2.4G Wireless Keyboard&Mouse: Vendor 0x40b Product 0x2013
[    29.036] (--) evdev: 2.4G Wireless Keyboard&Mouse: Found 12 mouse buttons
[    29.036] (--) evdev: 2.4G Wireless Keyboard&Mouse: Found scroll wheel(s)
[    29.036] (--) evdev: 2.4G Wireless Keyboard&Mouse: Found relative axes
[    29.036] (--) evdev: 2.4G Wireless Keyboard&Mouse: Found x and y relative axes
[    29.036] (--) evdev: 2.4G Wireless Keyboard&Mouse: Found absolute axes
[    29.036] (II) evdev: 2.4G Wireless Keyboard&Mouse: Forcing absolute x/y axes to exist.
[    29.036] (--) evdev: 2.4G Wireless Keyboard&Mouse: Found keys
[    29.036] (II) evdev: 2.4G Wireless Keyboard&Mouse: Configuring as mouse
[    29.036] (II) evdev: 2.4G Wireless Keyboard&Mouse: Configuring as keyboard
[    29.036] (II) evdev: 2.4G Wireless Keyboard&Mouse: Adding scrollwheel support
[    29.036] (**) evdev: 2.4G Wireless Keyboard&Mouse: YAxisMapping: buttons 4 and 5
[    29.036] (**) evdev: 2.4G Wireless Keyboard&Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    29.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:040B:2013.0002/input/input12/event8"
[    29.036] (II) XINPUT: Adding extended input device "2.4G Wireless Keyboard&Mouse" (type: KEYBOARD, id 12)
[    29.036] (**) Option "xkb_rules" "evdev"
[    29.036] (II) evdev: 2.4G Wireless Keyboard&Mouse: initialized for relative axes.
[    29.036] (WW) evdev: 2.4G Wireless Keyboard&Mouse: ignoring absolute axes.
[    29.036] (**) 2.4G Wireless Keyboard&Mouse: (accel) keeping acceleration scheme 1
[    29.036] (**) 2.4G Wireless Keyboard&Mouse: (accel) acceleration profile 0
[    29.036] (**) 2.4G Wireless Keyboard&Mouse: (accel) acceleration factor: 2.000
[    29.036] (**) 2.4G Wireless Keyboard&Mouse: (accel) acceleration threshold: 4
[    29.036] (II) config/udev: Adding input device 2.4G Wireless Keyboard&Mouse (/dev/input/mouse0)
[    29.036] (II) No input driver specified, ignoring this device.
[    29.036] (II) This device may have been added with another device file.
[    29.036] (II) config/udev: Adding input device USB Optical Mouse  (/dev/input/event9)
[    29.036] (**) USB Optical Mouse : Applying InputClass "evdev pointer catchall"
[    29.036] (**) USB Optical Mouse : Applying InputClass "evdev keyboard catchall"
[    29.036] (II) Using input driver 'evdev' for 'USB Optical Mouse '
[    29.036] (**) USB Optical Mouse : always reports core events
[    29.036] (**) evdev: USB Optical Mouse : Device: "/dev/input/event9"
[    29.036] (--) evdev: USB Optical Mouse : Vendor 0x1bcf Product 0x53
[    29.036] (--) evdev: USB Optical Mouse : Found 9 mouse buttons
[    29.036] (--) evdev: USB Optical Mouse : Found scroll wheel(s)
[    29.036] (--) evdev: USB Optical Mouse : Found relative axes
[    29.036] (--) evdev: USB Optical Mouse : Found x and y relative axes
[    29.036] (--) evdev: USB Optical Mouse : Found absolute axes
[    29.036] (II) evdev: USB Optical Mouse : Forcing absolute x/y axes to exist.
[    29.036] (--) evdev: USB Optical Mouse : Found keys
[    29.036] (II) evdev: USB Optical Mouse : Configuring as mouse
[    29.036] (II) evdev: USB Optical Mouse : Configuring as keyboard
[    29.036] (II) evdev: USB Optical Mouse : Adding scrollwheel support
[    29.036] (**) evdev: USB Optical Mouse : YAxisMapping: buttons 4 and 5
[    29.036] (**) evdev: USB Optical Mouse : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    29.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:1BCF:0053.0003/input/input13/event9"
[    29.036] (II) XINPUT: Adding extended input device "USB Optical Mouse " (type: KEYBOARD, id 13)
[    29.036] (**) Option "xkb_rules" "evdev"
[    29.037] (II) evdev: USB Optical Mouse : initialized for relative axes.
[    29.037] (WW) evdev: USB Optical Mouse : ignoring absolute axes.
[    29.037] (**) USB Optical Mouse : (accel) keeping acceleration scheme 1
[    29.037] (**) USB Optical Mouse : (accel) acceleration profile 0
[    29.037] (**) USB Optical Mouse : (accel) acceleration factor: 2.000
[    29.037] (**) USB Optical Mouse : (accel) acceleration threshold: 4
[    29.037] (II) config/udev: Adding input device USB Optical Mouse  (/dev/input/mouse1)
[    29.037] (II) No input driver specified, ignoring this device.
[    29.037] (II) This device may have been added with another device file.
[    29.037] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event18)
[    29.037] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[    29.037] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[    29.037] (**) BisonCam, NB Pro: always reports core events
[    29.037] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event18"
[    29.037] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x401
[    29.037] (--) evdev: BisonCam, NB Pro: Found keys
[    29.037] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[    29.037] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input25/event18"
[    29.037] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 14)
[    29.037] (**) Option "xkb_rules" "evdev"
[    29.037] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event15)
[    29.037] (II) No input driver specified, ignoring this device.
[    29.037] (II) This device may have been added with another device file.
[    29.038] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event16)
[    29.038] (II) No input driver specified, ignoring this device.
[    29.038] (II) This device may have been added with another device file.
[    29.038] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
[    29.038] (II) No input driver specified, ignoring this device.
[    29.038] (II) This device may have been added with another device file.
[    29.038] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[    29.038] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    29.038] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    29.038] (**) AT Translated Set 2 keyboard: always reports core events
[    29.038] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event6"
[    29.038] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    29.038] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    29.038] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    29.038] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input6/event6"
[    29.038] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[    29.038] (**) Option "xkb_rules" "evdev"
[    29.038] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[    29.038] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    29.038] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    29.038] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    29.038] (II) LoadModule: "synaptics"
[    29.038] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    29.055] (II) Module synaptics: vendor="X.Org Foundation"
[    29.055] 	compiled for 1.18.0, module version = 1.8.3
[    29.055] 	Module class: X.Org XInput Driver
[    29.055] 	ABI class: X.Org XInput driver, version 22.1
[    29.055] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    29.055] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    29.055] (**) Option "Device" "/dev/input/event11"
[    29.106] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    29.106] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692 (res 66)
[    29.106] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4680 (res 102)
[    29.106] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    29.106] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    29.106] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    29.106] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    29.106] (**) Option "TapButton1" "1"
[    29.106] (**) Option "TapButton2" "2"
[    29.106] (**) Option "TapButton3" "3"
[    29.106] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    29.106] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    29.133] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input16/event11"
[    29.133] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[    29.133] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    29.133] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    29.133] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[    29.133] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    29.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    29.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    29.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    29.133] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    29.133] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[    29.133] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    29.134] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[    29.134] (II) No input driver specified, ignoring this device.
[    29.134] (II) This device may have been added with another device file.
[   170.212] (II) NVIDIA(0): Setting mode "NULL"
[   170.214] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   170.214] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   170.214] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   170.214] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   170.214] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   170.214] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   170.214] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   170.214] (II) NVIDIA(0):     Config Options in the README.
[   170.220] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   179.493] (II) NVIDIA(0): Setting mode "NULL"
[   179.495] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   179.495] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   179.495] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   179.495] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   179.495] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   179.495] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   179.495] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   179.495] (II) NVIDIA(0):     Config Options in the README.
[   179.501] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found

xorg.conf

/etc/X11/xorg.conf
Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
    Inactive "intel"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    # Change BusID if necessary. Tips: (lspci | grep 3D) (Change 01:00.0 to 1:0:0)
    BusID "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration" "Yes"
EndSection

Section "Device"
    Identifier "intel"
    Driver "modesetting"
    # Change BusID if necessary. Tips: (lspci | grep VGA) (Change 00:02.0 to 0:2:0)
    BusID "PCI:0:2:0"
    Option "AccelMethod"  "none"
EndSection

Section "Screen"
    Identifier "intel"
    Device "intel"
EndSection

And I try Alternative configuration

Section "Device"
    Identifier  "intel"
    Driver      "modesetting"
    BusID       "PCI:0:2:0"
    Option      "AccelMethod"  "sna"
    #Option      "TearFree" "True"
    #Option      "Tiling" "True"
    #Option      "SwapbuffersWait" "True"
EndSection

It can start kde.But only have a cursor.

Offline

#9 2015-11-30 13:54:26

Xabre
Member
From: Serbia
Registered: 2009-03-19
Posts: 757

Re: [solved]After install nvidia driver,Ican not start kde

How are you starting the session?

Offline

#10 2015-12-02 04:45:41

louiswi
Member
Registered: 2015-11-29
Posts: 7

Re: [solved]After install nvidia driver,Ican not start kde

Xabre wrote:

How are you starting the session?

I am using bumblebee,and it works. Thanks.

Offline

Pages: 1

Board footer

Powered by FluxBB