You are not logged in.

Pages: 1

#1 2015-11-30 19:42:41

beatleboy07
Member
Registered: 2015-05-24
Posts: 15

startx seems to fail after nvidia-340xx-rt update

So I had some issues with updating nvidia-340xx-rt. Seems like that has all been resolved, but now I can't seem to get back into my i3wm environment. Right now, I manually log in and type startx in order to get to my wm. However, now it looks like it's about to start, but then it fails and goes back to the command prompt.

Here's my /var/log/Xorg.0.log file:

[  1874.961] 
X.Org X Server 1.18.0
Release Date: 2015-11-09
[  1875.085] X Protocol Version 11, Revision 0
[  1875.127] Build Operating System: Linux 4.2.3-1-ARCH x86_64 
[  1875.216] Current Operating System: Linux localhost 4.1.10-rt11-1-rt #1 SMP PREEMPT RT Tue Nov 3 23:42:54 PST 2015 x86_64
[  1875.217] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-rt root=UUID=de9c4a72-0ea0-4844-bc03-6c8e7eb8039f rw quiet
[  1875.361] Build Date: 18 November 2015  08:07:09AM
[  1875.409]  
[  1875.459] Current version of pixman: 0.32.8
[  1875.562] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1875.563] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1875.787] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 30 11:34:06 2015
[  1875.845] (==) Using config file: "/etc/X11/xorg.conf"
[  1875.903] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1875.904] (==) ServerLayout "Layout0"
[  1875.904] (**) |-->Screen "Screen0" (0)
[  1875.904] (**) |   |-->Monitor "Monitor0"
[  1875.905] (**) |   |-->Device "Device0"
[  1875.905] (**) |-->Input Device "Keyboard0"
[  1875.905] (**) |-->Input Device "Mouse0"
[  1875.905] (==) Automatically adding devices
[  1875.905] (==) Automatically enabling devices
[  1875.905] (==) Automatically adding GPU devices
[  1875.905] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1875.905] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[  1875.906] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1875.906] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  1875.906] (WW) Disabling Keyboard0
[  1875.906] (WW) Disabling Mouse0
[  1875.906] (II) Loader magic: 0x819d40
[  1875.906] (II) Module ABI versions:
[  1875.906] 	X.Org ANSI C Emulation: 0.4
[  1875.906] 	X.Org Video Driver: 20.0
[  1875.906] 	X.Org XInput driver : 22.1
[  1875.906] 	X.Org Server Extension : 9.0
[  1875.909] (++) using VT number 1

[  1875.909] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  1875.917] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[  1875.919] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1875.920] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[  1875.929] (--) PCI:*(0:1:0:0) 10de:0caf:1028:0443 rev 162, Mem @ 0xf0000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[  1875.930] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1875.930] (II) LoadModule: "glx"
[  1875.931] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1876.005] (II) Module glx: vendor="NVIDIA Corporation"
[  1876.005] 	compiled for 4.0.2, module version = 1.0.0
[  1876.005] 	Module class: X.Org Server Extension
[  1876.005] (II) NVIDIA GLX Module  340.96  Sun Nov  8 22:06:18 PST 2015
[  1876.005] (II) LoadModule: "nvidia"
[  1876.006] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1876.009] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1876.009] 	compiled for 4.0.2, module version = 1.0.0
[  1876.009] 	Module class: X.Org Video Driver
[  1876.009] (II) NVIDIA dlloader X Driver  340.96  Sun Nov  8 21:46:28 PST 2015
[  1876.009] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1876.010] (II) Loading sub module "fb"
[  1876.010] (II) LoadModule: "fb"
[  1876.010] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1876.011] (II) Module fb: vendor="X.Org Foundation"
[  1876.011] 	compiled for 1.18.0, module version = 1.0.0
[  1876.011] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1876.011] (WW) Unresolved symbol: fbGetGCPrivateKey
[  1876.011] (II) Loading sub module "wfb"
[  1876.011] (II) LoadModule: "wfb"
[  1876.012] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1876.013] (II) Module wfb: vendor="X.Org Foundation"
[  1876.013] 	compiled for 1.18.0, module version = 1.0.0
[  1876.013] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1876.013] (II) Loading sub module "ramdac"
[  1876.013] (II) LoadModule: "ramdac"
[  1876.013] (II) Module "ramdac" already built-in
[  1876.015] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  1876.015] (==) NVIDIA(0): RGB weight 888
[  1876.015] (==) NVIDIA(0): Default visual is TrueColor
[  1876.016] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1876.016] (**) NVIDIA(0): Enabling 2D acceleration
[  1877.362] (II) NVIDIA(0): Display (AU Optronics Corporation (DFP-0)) does not support
[  1877.362] (II) NVIDIA(0):     NVIDIA 3D Vision stereo.
[  1877.363] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[  1877.376] (II) NVIDIA(0): NVIDIA GPU GeForce GT 335M (GT215) at PCI:1:0:0 (GPU-0)
[  1877.377] (--) NVIDIA(0): Memory: 1048576 kBytes
[  1877.377] (--) NVIDIA(0): VideoBIOS: 70.15.3c.00.a6
[  1877.377] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  1877.384] (--) NVIDIA(0): Valid display device(s) on GeForce GT 335M at PCI:1:0:0
[  1877.385] (--) NVIDIA(0):     CRT-0
[  1877.385] (--) NVIDIA(0):     AU Optronics Corporation (DFP-0) (boot, connected)
[  1877.385] (--) NVIDIA(0):     DFP-1
[  1877.385] (--) NVIDIA(0):     DFP-2
[  1877.385] (--) NVIDIA(0):     DFP-3
[  1877.385] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  1877.385] (--) NVIDIA(0): AU Optronics Corporation (DFP-0): Internal LVDS
[  1877.385] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[  1877.385] (--) NVIDIA(0): DFP-1: Internal TMDS
[  1877.385] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[  1877.385] (--) NVIDIA(0): DFP-2: Internal TMDS
[  1877.385] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[  1877.385] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[  1877.385] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[  1877.385] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1877.385] (**) NVIDIA(0):     device AU Optronics Corporation (DFP-0) (Using EDID
[  1877.386] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[  1877.389] (==) NVIDIA(0): 
[  1877.389] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  1877.390] (==) NVIDIA(0):     will be used as the requested mode.
[  1877.390] (==) NVIDIA(0): 
[  1877.390] (II) NVIDIA(0): Validated MetaModes:
[  1877.390] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[  1877.390] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[  1878.471] (--) NVIDIA(0): DPI set to (133, 139); computed from "UseEdidDpi" X config
[  1878.471] (--) NVIDIA(0):     option
[  1878.471] (--) Depth 24 pixmap format is 32 bpp
[  1878.472] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[  1878.495] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  1878.495] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  1878.495] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  1878.495] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  1878.495] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  1878.495] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  1878.495] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  1878.495] (II) NVIDIA(0):     Config Options in the README.
[  1878.504] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[  1879.048] (==) NVIDIA(0): Disabling shared memory pixmaps
[  1879.048] (==) NVIDIA(0): Backing store enabled
[  1879.048] (==) NVIDIA(0): Silken mouse enabled
[  1879.049] (**) NVIDIA(0): DPMS enabled
[  1879.050] (II) Loading sub module "dri2"
[  1879.050] (II) LoadModule: "dri2"
[  1879.050] (II) Module "dri2" already built-in
[  1879.050] (II) NVIDIA(0): [DRI2] Setup complete
[  1879.050] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  1879.050] (--) RandR disabled
[  1879.075] (II) Initializing extension GLX
[  1879.075] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1879.673] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1879.673] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1879.673] (II) LoadModule: "libinput"
[  1879.674] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  1879.676] (II) Module libinput: vendor="X.Org Foundation"
[  1879.676] 	compiled for 1.18.0, module version = 0.15.0
[  1879.676] 	Module class: X.Org XInput Driver
[  1879.676] 	ABI class: X.Org XInput driver, version 22.1
[  1879.678] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 29 paused 0
[  1879.679] (II) Using input driver 'libinput' for 'Power Button'
[  1879.679] (**) Power Button: always reports core events
[  1879.679] (**) Option "Device" "/dev/input/event3"
[  1879.681] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[  1879.681] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[  1879.682] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[  1879.682] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1879.685] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[  1879.685] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[  1879.688] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[  1879.688] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1879.688] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1879.690] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 32 paused 0
[  1879.690] (II) Using input driver 'libinput' for 'Video Bus'
[  1879.690] (**) Video Bus: always reports core events
[  1879.690] (**) Option "Device" "/dev/input/event4"
[  1879.692] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[  1879.692] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[  1879.692] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event4"
[  1879.693] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1879.695] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[  1879.696] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[  1879.698] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1879.698] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1879.698] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1879.700] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 33 paused 0
[  1879.700] (II) Using input driver 'libinput' for 'Power Button'
[  1879.700] (**) Power Button: always reports core events
[  1879.700] (**) Option "Device" "/dev/input/event2"
[  1879.702] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[  1879.702] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[  1879.702] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[  1879.703] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  1879.705] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[  1879.705] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[  1879.708] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  1879.708] (II) No input driver specified, ignoring this device.
[  1879.708] (II) This device may have been added with another device file.
[  1879.711] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[  1879.711] (II) No input driver specified, ignoring this device.
[  1879.711] (II) This device may have been added with another device file.
[  1879.713] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[  1879.713] (II) No input driver specified, ignoring this device.
[  1879.713] (II) This device may have been added with another device file.
[  1879.715] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[  1879.715] (II) No input driver specified, ignoring this device.
[  1879.715] (II) This device may have been added with another device file.
[  1879.718] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[  1879.718] (II) No input driver specified, ignoring this device.
[  1879.718] (II) This device may have been added with another device file.
[  1879.721] (II) config/udev: Adding input device Laptop_Integrated_Webcam_1.3M (/dev/input/event6)
[  1879.721] (**) Laptop_Integrated_Webcam_1.3M: Applying InputClass "evdev keyboard catchall"
[  1879.721] (**) Laptop_Integrated_Webcam_1.3M: Applying InputClass "libinput keyboard catchall"
[  1879.723] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 34 paused 0
[  1879.723] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_1.3M'
[  1879.723] (**) Laptop_Integrated_Webcam_1.3M: always reports core events
[  1879.724] (**) Option "Device" "/dev/input/event6"
[  1879.726] (II) input device 'Laptop_Integrated_Webcam_1.3M', /dev/input/event6 is tagged by udev as: Keyboard
[  1879.726] (II) input device 'Laptop_Integrated_Webcam_1.3M', /dev/input/event6 is a keyboard
[  1879.726] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8/event6"
[  1879.726] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_1.3M" (type: KEYBOARD, id 9)
[  1879.729] (II) input device 'Laptop_Integrated_Webcam_1.3M', /dev/input/event6 is tagged by udev as: Keyboard
[  1879.729] (II) input device 'Laptop_Integrated_Webcam_1.3M', /dev/input/event6 is a keyboard
[  1879.732] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event14)
[  1879.732] (II) No input driver specified, ignoring this device.
[  1879.732] (II) This device may have been added with another device file.
[  1879.734] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event15)
[  1879.734] (II) No input driver specified, ignoring this device.
[  1879.734] (II) This device may have been added with another device file.
[  1879.736] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event16)
[  1879.736] (II) No input driver specified, ignoring this device.
[  1879.736] (II) This device may have been added with another device file.
[  1879.738] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[  1879.738] (II) No input driver specified, ignoring this device.
[  1879.739] (II) This device may have been added with another device file.
[  1879.741] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1879.741] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1879.741] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  1879.743] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 35 paused 0
[  1879.743] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  1879.743] (**) AT Translated Set 2 keyboard: always reports core events
[  1879.743] (**) Option "Device" "/dev/input/event0"
[  1879.745] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  1879.745] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  1879.746] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1879.746] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[  1879.748] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  1879.749] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  1879.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[  1879.751] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1879.751] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  1879.751] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[  1879.752] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[  1879.753] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 36 paused 0
[  1879.754] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[  1879.754] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1879.754] (**) Option "Device" "/dev/input/event12"
[  1879.756] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event12 is tagged by udev as: Touchpad
[  1879.756] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event12 is a touchpad
[  1879.757] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
[  1879.757] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[  1879.758] (**) Option "AccelerationScheme" "none"
[  1879.758] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[  1879.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1879.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1879.760] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event12 is tagged by udev as: Touchpad
[  1879.760] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event12 is a touchpad
[  1879.762] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  1879.762] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  1879.764] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[  1879.764] (II) No input driver specified, ignoring this device.
[  1879.764] (II) This device may have been added with another device file.
[  1879.768] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[  1879.768] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1879.768] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  1879.770] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 37 paused 0
[  1879.770] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[  1879.770] (**) Dell WMI hotkeys: always reports core events
[  1879.770] (**) Option "Device" "/dev/input/event7"
[  1879.772] (II) input device 'Dell WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[  1879.772] (II) input device 'Dell WMI hotkeys', /dev/input/event7 is a keyboard
[  1879.772] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event7"
[  1879.772] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[  1879.775] (II) input device 'Dell WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[  1879.775] (II) input device 'Dell WMI hotkeys', /dev/input/event7 is a keyboard
[  1879.839] (**) Option "fd" "29"
[  1879.840] (**) Option "fd" "32"
[  1879.840] (**) Option "fd" "33"
[  1879.840] (**) Option "fd" "34"
[  1879.841] (**) Option "fd" "35"
[  1879.841] (**) Option "fd" "36"
[  1879.842] (**) Option "fd" "37"
[  1879.849] (II) UnloadModule: "libinput"
[  1879.849] (II) systemd-logind: releasing fd for 13:71
[  1879.880] (II) UnloadModule: "libinput"
[  1879.880] (II) systemd-logind: releasing fd for 13:76
[  1879.933] (II) UnloadModule: "libinput"
[  1879.933] (II) systemd-logind: releasing fd for 13:64
[  1879.980] (II) UnloadModule: "libinput"
[  1879.980] (II) systemd-logind: releasing fd for 13:70
[  1880.027] (II) UnloadModule: "libinput"
[  1880.027] (II) systemd-logind: releasing fd for 13:66
[  1880.047] (II) UnloadModule: "libinput"
[  1880.047] (II) systemd-logind: releasing fd for 13:68
[  1880.071] (II) UnloadModule: "libinput"
[  1880.071] (II) systemd-logind: releasing fd for 13:67
[  1882.015] (II) NVIDIA(GPU-0): Deleting GPU-0
[  1882.121] (II) Server terminated successfully (0). Closing log file.

Any help is extremely appreciated!

Offline

#2 2015-11-30 19:59:57

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,541
Website

Re: startx seems to fail after nvidia-340xx-rt update

I don't see any nvidia related errors there.  Could the update be a coincidence?  The relevant line form the log is here:

[  1882.121] (II) Server terminated successfully (0). Closing log file.

This means X did everything it was supposed to, and exited gracefully.  This suggests a problem with your xinitrc and/or something called from your xinitrc.  Please post that file.

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#3 2015-11-30 20:05:35

beatleboy07
Member
Registered: 2015-05-24
Posts: 15

Re: startx seems to fail after nvidia-340xx-rt update

I'm not sure if it's a coincidence...but it pretty much happened immediately after the update.

The only thing in my ~/.xinitrc file is simply exec i3

Offline

#4 2015-11-30 20:26:33

beatleboy07
Member
Registered: 2015-05-24
Posts: 15

Re: startx seems to fail after nvidia-340xx-rt update

I realized that I had never copied the default xinitrc file when I set this computer up. So now it reads like this:

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then







    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then







    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec i3
exec xterm -geometry 80x66+0+0 -name login

But the same problem occurs.

Offline

#5 2015-11-30 22:16:27

beatleboy07
Member
Registered: 2015-05-24
Posts: 15

Re: startx seems to fail after nvidia-340xx-rt update

Well, looks like I fixed it by reinstalling nvidia-340xx-libgl. I thought I had done that before, but this time it seemed to work.

Offline

Pages: 1

Board footer

Powered by FluxBB