You are not logged in.

#1 2015-12-04 23:30:13

aysip
Member
Registered: 2015-12-04
Posts: 3

[Solved]Pulseaudio runs but there is no sound. version 7.1

Please help with sound, my pulseaudio log:

the full debug log:
http://pastebin.com/H25A9kT0

Errors:

I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel PCH
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel PCH use case configuration -2
...
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:0: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
...
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel HDMI
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel HDMI use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel HDMI
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
...

I've already checked these topics but nothing helped.
https://bbs.archlinux.org/viewtopic.php?id=179923
https://bbs.archlinux.org/viewtopic.php?id=154002
http://lists.freedesktop.org/archives/p … 12018.html

Last edited by aysip (2015-12-05 13:14:20)

Offline

#2 2015-12-05 01:16:58

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,415

Re: [Solved]Pulseaudio runs but there is no sound. version 7.1

Post

aplay -l
pacmd list-cards
pacmd list-sinks
sudo fuser -v /dev/snd/*

Online

#3 2015-12-05 01:25:10

anatolik
Developer
Registered: 2012-09-27
Posts: 458

Re: [Solved]Pulseaudio runs but there is no sound. version 7.1

Did you update alsa recently? It requires rebooting after the package update otherwise it breaks audio playback.


Read it before posting http://www.catb.org/esr/faqs/smart-questions.html
Ruby gems repository done right https://bbs.archlinux.org/viewtopic.php?id=182729
Fast initramfs generator with security in mind https://wiki.archlinux.org/index.php/Booster

Offline

#4 2015-12-05 11:49:04

aysip
Member
Registered: 2015-12-04
Posts: 3

Re: [Solved]Pulseaudio runs but there is no sound. version 7.1

Sound disappears after pulseaudio installation.

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC3239 Analog [ALC3239 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
$ pacmd list-cards
2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_03.0>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "1"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0xb2510000 irq 49"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:03.0"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0a0c"
		device.product.name = "Haswell-ULT HD Audio Controller"
		device.form_factor = "internal"
		device.string = "1"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: unknown)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: unknown)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 100, available: unknown)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: unknown)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: unknown)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:hdmi-stereo>
	sinks:
		alsa_output.pci-0000_00_03.0.hdmi-stereo/#0: Built-in Audio Digital Stereo (HDMI)
	sources:
		alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor/#0: Monitor of Built-in Audio Digital Stereo (HDMI)
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.pci-0000_00_1b.0>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xb2514000 irq 46"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9c20"
		device.product.name = "8 Series HD Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#1: Monitor of Built-in Audio Analog Stereo
		alsa_input.pci-0000_00_1b.0.analog-stereo/#2: Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
$ pacmd list-sinks
2 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_03.0.hdmi-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9950
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
	card: 0 <alsa_card.pci-0000_00_03.0>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 0"
		alsa.id = "HDMI 0"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "3"
		alsa.card = "1"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0xb2510000 irq 49"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:03.0"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0a0c"
		device.product.name = "Haswell-ULT HD Audio Controller"
		device.form_factor = "internal"
		device.string = "hdmi:1"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo"
		device.profile.description = "Digital Stereo (HDMI)"
		device.description = "Built-in Audio Digital Stereo (HDMI)"
		alsa.mixer_name = "Intel Haswell HDMI"
		alsa.components = "HDA:80862807,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
	active port: <hdmi-output-0>
    index: 1
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9959
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 1
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 1 <alsa_card.pci-0000_00_1b.0>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC3239 Analog"
		alsa.id = "ALC3239 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xb2514000 irq 46"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9c20"
		device.product.name = "8 Series HD Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC3239"
		alsa.components = "HDA:10ec0283,17aa4024,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>
$ sudo fuser -v /dev/snd/*
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  elena       596 F.... pulseaudio
/dev/snd/controlC1:  elena       596 F.... pulseaudio

Offline

#5 2015-12-05 12:19:10

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,415

Re: [Solved]Pulseaudio runs but there is no sound. version 7.1

1st: Have you rebooted in between as anatolik suggested?

2nd: The pulse default sink currently is HDMI you likely want analog, go into pavucontrol set analog as the default device, and move any streams you open that still use HDMI to analog as well (it will remember that choice)

Online

#6 2015-12-05 13:13:50

aysip
Member
Registered: 2015-12-04
Posts: 3

Re: [Solved]Pulseaudio runs but there is no sound. version 7.1

V1del,

1. Yes, I have rebooted. It didn't help.

2. This advice has helped solve the problem. Thank you!

Offline

Board footer

Powered by FluxBB