You are not logged in.
Hey Archers,
I have a new Laptop with an Intel Skylake 6700HK with integrated Intel HD 530 and also an NVIDIA Geforce GTX 980.
Everything runs fine until I try to resume after suspend/hibernate, which will result in a screen corruption, see picture below:
screen corruption
The system is quite unresposive which means I cannot enter any TTY or anything but just can shut it down with the power button.
I'm currently using Kernel 4.2.5-1 and using i3 as my window manager. In installed the following packages:
xf86-video-intel nvidia bumblebeeand added the bumblebee service with
systemctl enable bumblebeed.serviceI managed to capture the Xorg.0.log from my system while it was hanging but could not get any clue out of it:
[ 3.719]
X.Org X Server 1.18.0
Release Date: 2015-11-09
[ 3.719] X Protocol Version 11, Revision 0
[ 3.719] Build Operating System: Linux 4.2.3-1-ARCH x86_64
[ 3.719] Current Operating System: Linux pharyx 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015 x86_64
[ 3.719] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=f532cd42-9d9d-434f-a3b3-8081bf3ac707 rw verbose i915.preliminary_hw_support=1
[ 3.719] Build Date: 18 November 2015 08:07:09AM
[ 3.719]
[ 3.719] Current version of pixman: 0.32.8
[ 3.719] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.719] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.719] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 16 14:57:11 2015
[ 3.720] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3.720] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.721] (==) No Layout section. Using the first Screen section.
[ 3.721] (==) No screen section available. Using defaults.
[ 3.721] (**) |-->Screen "Default Screen Section" (0)
[ 3.721] (**) | |-->Monitor "<default monitor>"
[ 3.722] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 3.722] (**) | |-->Device "Intel Graphics"
[ 3.722] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.722] (==) Automatically adding devices
[ 3.722] (==) Automatically enabling devices
[ 3.722] (==) Automatically adding GPU devices
[ 3.722] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3.724] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 3.724] Entry deleted from font path.
[ 3.724] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.724] Entry deleted from font path.
[ 3.724] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.724] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.724] Entry deleted from font path.
[ 3.724] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.724] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 3.724] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.724] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.724] (II) Loader magic: 0x819d40
[ 3.724] (II) Module ABI versions:
[ 3.724] X.Org ANSI C Emulation: 0.4
[ 3.724] X.Org Video Driver: 20.0
[ 3.724] X.Org XInput driver : 22.1
[ 3.724] X.Org Server Extension : 9.0
[ 3.725] (++) using VT number 7
[ 3.725] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 3.725] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3.727] (--) PCI:*(0:0:2:0) 8086:191b:1558:6540 rev 6, Mem @ 0xdd000000/16777216, 0xa0000000/536870912, I/O @ 0x0000f000/64
[ 3.727] (--) PCI: (0:1:0:0) 10de:1617:1558:6783 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.727] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3.727] (II) LoadModule: "glx"
[ 3.727] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.735] (II) Module glx: vendor="X.Org Foundation"
[ 3.735] compiled for 1.18.0, module version = 1.0.0
[ 3.735] ABI class: X.Org Server Extension, version 9.0
[ 3.735] (==) AIGLX enabled
[ 3.735] (II) LoadModule: "intel"
[ 3.735] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.737] (II) Module intel: vendor="X.Org Foundation"
[ 3.737] compiled for 1.18.0, module version = 2.99.917
[ 3.737] Module class: X.Org Video Driver
[ 3.737] ABI class: X.Org Video Driver, version 20.0
[ 3.737] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 3.738] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 3.738] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 3.738] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 3.744] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150522
[ 3.744] (II) intel(0): SNA compiled from 2.99.917-478-gdf72bc5
[ 3.746] (--) intel(0): gen9 engineering sample
[ 3.746] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 3.746] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.746] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3.746] (==) intel(0): RGB weight 888
[ 3.746] (==) intel(0): Default visual is TrueColor
[ 3.746] (**) intel(0): Option "AccelMethod" "sna"
[ 3.746] (**) intel(0): Option "DRI" "3"
[ 3.746] (**) intel(0): Option "TearFree" "true"
[ 3.746] (II) intel(0): Output eDP1 has no monitor section
[ 3.816] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 3.816] (II) intel(0): Enabled output eDP1
[ 3.816] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 3.817] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3.817] (II) intel(0): Enabled output VIRTUAL1
[ 3.817] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 3.817] (**) intel(0): TearFree enabled
[ 3.817] (==) intel(0): DPI set to (96, 96)
[ 3.817] (II) Loading sub module "dri3"
[ 3.817] (II) LoadModule: "dri3"
[ 3.817] (II) Module "dri3" already built-in
[ 3.817] (II) Loading sub module "dri2"
[ 3.817] (II) LoadModule: "dri2"
[ 3.817] (II) Module "dri2" already built-in
[ 3.817] (II) Loading sub module "present"
[ 3.817] (II) LoadModule: "present"
[ 3.817] (II) Module "present" already built-in
[ 3.817] (==) Depth 24 pixmap format is 32 bpp
[ 3.820] (II) intel(0): SNA initialized with generic backend
[ 3.820] (==) intel(0): Backing store enabled
[ 3.820] (==) intel(0): Silken mouse enabled
[ 3.821] (II) intel(0): HW Cursor enabled
[ 3.821] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3.821] (==) intel(0): DPMS enabled
[ 3.821] (==) intel(0): Display hotplug detection enabled
[ 3.821] (II) intel(0): Textured video not supported on this hardware or backend
[ 3.822] (II) intel(0): [DRI2] Setup complete
[ 3.822] (II) intel(0): [DRI2] DRI driver: i965
[ 3.822] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 3.822] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 3.822] (II) intel(0): hardware support for Present enabled
[ 3.822] (--) RandR disabled
[ 3.850] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3.850] (II) AIGLX: enabled GLX_ARB_create_context
[ 3.850] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3.850] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3.850] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3.850] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3.850] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 3.850] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 3.850] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3.850] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 3.851] (II) AIGLX: Loaded and initialized i965
[ 3.851] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.856] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 3.856] (II) intel(0): Setting screen physical size to 508 x 285
[ 4.058] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4.058] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.058] (**) Power Button: Applying InputClass "keyboard"
[ 4.058] (II) LoadModule: "evdev"
[ 4.058] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4.060] (II) Module evdev: vendor="X.Org Foundation"
[ 4.060] compiled for 1.18.0, module version = 2.10.0
[ 4.060] Module class: X.Org XInput Driver
[ 4.060] ABI class: X.Org XInput driver, version 22.1
[ 4.060] (II) Using input driver 'evdev' for 'Power Button'
[ 4.060] (**) Power Button: always reports core events
[ 4.060] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 4.060] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.060] (--) evdev: Power Button: Found keys
[ 4.060] (II) evdev: Power Button: Configuring as keyboard
[ 4.060] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 4.060] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.060] (**) Option "xkb_rules" "evdev"
[ 4.060] (**) Option "xkb_model" "pc105"
[ 4.060] (**) Option "xkb_layout" "de"
[ 4.060] (**) Option "xkb_variant" "basic"
[ 4.088] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 4.088] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4.088] (**) Video Bus: Applying InputClass "keyboard"
[ 4.088] (II) Using input driver 'evdev' for 'Video Bus'
[ 4.088] (**) Video Bus: always reports core events
[ 4.088] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 4.088] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4.088] (--) evdev: Video Bus: Found keys
[ 4.088] (II) evdev: Video Bus: Configuring as keyboard
[ 4.088] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 4.088] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4.088] (**) Option "xkb_rules" "evdev"
[ 4.088] (**) Option "xkb_model" "pc105"
[ 4.088] (**) Option "xkb_layout" "de"
[ 4.088] (**) Option "xkb_variant" "basic"
[ 4.089] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 4.089] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4.089] (**) Video Bus: Applying InputClass "keyboard"
[ 4.089] (II) Using input driver 'evdev' for 'Video Bus'
[ 4.089] (**) Video Bus: always reports core events
[ 4.089] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 4.089] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4.089] (--) evdev: Video Bus: Found keys
[ 4.089] (II) evdev: Video Bus: Configuring as keyboard
[ 4.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input5/event5"
[ 4.089] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 4.089] (**) Option "xkb_rules" "evdev"
[ 4.089] (**) Option "xkb_model" "pc105"
[ 4.089] (**) Option "xkb_layout" "de"
[ 4.089] (**) Option "xkb_variant" "basic"
[ 4.090] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 4.090] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.090] (**) Power Button: Applying InputClass "keyboard"
[ 4.090] (II) Using input driver 'evdev' for 'Power Button'
[ 4.090] (**) Power Button: always reports core events
[ 4.090] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 4.090] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.090] (--) evdev: Power Button: Found keys
[ 4.090] (II) evdev: Power Button: Configuring as keyboard
[ 4.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 4.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 4.090] (**) Option "xkb_rules" "evdev"
[ 4.090] (**) Option "xkb_model" "pc105"
[ 4.090] (**) Option "xkb_layout" "de"
[ 4.090] (**) Option "xkb_variant" "basic"
[ 4.091] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 4.091] (II) No input driver specified, ignoring this device.
[ 4.091] (II) This device may have been added with another device file.
[ 4.091] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 4.091] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4.091] (**) Sleep Button: Applying InputClass "keyboard"
[ 4.091] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4.091] (**) Sleep Button: always reports core events
[ 4.091] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 4.091] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4.091] (--) evdev: Sleep Button: Found keys
[ 4.091] (II) evdev: Sleep Button: Configuring as keyboard
[ 4.091] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 4.091] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 4.091] (**) Option "xkb_rules" "evdev"
[ 4.091] (**) Option "xkb_model" "pc105"
[ 4.091] (**) Option "xkb_layout" "de"
[ 4.091] (**) Option "xkb_variant" "basic"
[ 4.092] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event15)
[ 4.092] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 4.092] (**) BisonCam, NB Pro: Applying InputClass "keyboard"
[ 4.092] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 4.092] (**) BisonCam, NB Pro: always reports core events
[ 4.092] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event15"
[ 4.092] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x66d
[ 4.092] (--) evdev: BisonCam, NB Pro: Found keys
[ 4.092] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 4.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input21/event15"
[ 4.093] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 11)
[ 4.093] (**) Option "xkb_rules" "evdev"
[ 4.093] (**) Option "xkb_model" "pc105"
[ 4.093] (**) Option "xkb_layout" "de"
[ 4.093] (**) Option "xkb_variant" "basic"
[ 4.093] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 4.093] (II) No input driver specified, ignoring this device.
[ 4.093] (II) This device may have been added with another device file.
[ 4.094] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 4.094] (II) No input driver specified, ignoring this device.
[ 4.094] (II) This device may have been added with another device file.
[ 4.094] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[ 4.095] (II) No input driver specified, ignoring this device.
[ 4.095] (II) This device may have been added with another device file.
[ 4.095] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 4.095] (II) No input driver specified, ignoring this device.
[ 4.095] (II) This device may have been added with another device file.
[ 4.096] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 4.096] (II) No input driver specified, ignoring this device.
[ 4.096] (II) This device may have been added with another device file.
[ 4.096] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 4.096] (II) No input driver specified, ignoring this device.
[ 4.096] (II) This device may have been added with another device file.
[ 4.096] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 4.096] (II) No input driver specified, ignoring this device.
[ 4.097] (II) This device may have been added with another device file.
[ 4.097] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[ 4.097] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4.097] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[ 4.097] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4.097] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.097] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event6"
[ 4.097] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4.097] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4.097] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4.097] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input6/event6"
[ 4.097] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 4.097] (**) Option "xkb_rules" "evdev"
[ 4.097] (**) Option "xkb_model" "pc105"
[ 4.097] (**) Option "xkb_layout" "de"
[ 4.097] (**) Option "xkb_variant" "basic"
[ 4.098] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 4.098] (II) No input driver specified, ignoring this device.
[ 4.098] (II) This device may have been added with another device file.
[ 4.270] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 4.270] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 4.315] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[ 4.315] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 4.315] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 4.315] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 4.315] (II) LoadModule: "synaptics"
[ 4.315] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4.316] (II) Module synaptics: vendor="X.Org Foundation"
[ 4.316] compiled for 1.18.0, module version = 1.8.3
[ 4.316] Module class: X.Org XInput Driver
[ 4.316] ABI class: X.Org XInput driver, version 22.1
[ 4.316] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 4.316] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4.316] (**) Option "Device" "/dev/input/event16"
[ 4.390] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1326 - 5654 (res 40)
[ 4.390] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1228 - 4716 (res 59)
[ 4.390] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 4.390] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 4.390] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 4.390] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 4.390] (**) Option "TapButton1" "1"
[ 4.390] (**) Option "TapButton2" "2"
[ 4.390] (**) Option "TapButton3" "3"
[ 4.390] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4.390] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4.423] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input13/event16"
[ 4.423] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 4.423] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 4.423] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 4.423] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 4.424] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 4.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 4.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 4.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 4.424] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 905.837] (II) config/udev: removing device BisonCam, NB Pro
[ 905.940] (II) evdev: BisonCam, NB Pro: Close
[ 905.940] (II) UnloadModule: "evdev"This is my mkinitcpio.conf where I had to involve the i915 kernel module to make the Xserver run:
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="i915"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
#
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
#
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
#
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""I'm using this config file under /etc/X11/xorg.conf.d/
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "DRI" "3"
Option "AccelMethod" "glamor"
Option "TearFree" "true"
EndSectionIf you need any further log please let me know, I will provide them. I'm just clueless where to start debugging this issue but maybe one of you can help me solve this problem or just point me in the right direction.
I would appreciate any help!
Thanks in advance!
EDIT: Of course I'm using the i915.preliminary_hw_support=1 as advised in the wiki. See my grub-config below:
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="verbose i915.preliminary_hw_support=1 i915.semaphores=1"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"Last edited by reedts (2015-12-17 07:54:05)
Offline