[SOLVED] Corrupted Memory Arch specific

elninja · 2015-12-18 17:56:29

Hi, I have a lenovo D20 with a single 6-core Xeon X5670 and 4 x 4GB PC3-10600R ECC RAM sticks. R9 290X 4GB MSI graphics card.

I've made sure that the RAM is properly installed in the slots 1, 2, 3, 4 for CPU #1
I've ran Memtest86+ and the 16GB checks out
I can run Windows 10 and cpu intensive, RAM intensive applications run without a hitch
I've also been able to install and run CentOS 7

The issue I'm having is related with memory corruption at random times and only using Arch Linux.
For example, trying to install Arch from a live cd generally pacstrap fails during downloading, sometimes it crashes pacman, other times I just get a kernel panic.

What's even more weird is that I was able to install successfully with only 1 RAM stick, afterwards I installed the full amount of RAM and the system ran just fine until 3 or 4 reboots later.
During the time it ran with 16GB it showed the correct amount.

I suspect some sort of race condition and I feel like the next step is to try different kernels or compile from scratch.

I'm at a loss with what's wrong.

Sorry for the bad lighting in the pictures, I was trying not to wake up my girlfriend at 1am.

Example of memory corruption
Picture of screen with error

My RAM sticks (They differ only slightly but are built to the same specs)
Picture of memory

Moderator edit: converted over sized images to links

Last edited by elninja (2016-01-19 00:44:42)

ewaller · 2015-12-18 18:06:57

Welcome to Arch Linux. Nice job with BBCode on your first post. The way you structured it is usually used for displaying thumbnails that allow click through to the full sized image. Unfortunately, you used the full size image in the place of thumbnails, so I conveted those full sized images to a description. Thanks for your understanding https://wiki.archlinux.org/index.php/Fo … s_and_code

ewaller · 2015-12-18 18:09:57

Have you installed and configured the Intel microcode update?
What is wrong with waking your girlfriend at 1:00 am ?

elninja · 2015-12-18 18:10:15

Thank you for that, I was asking myself if the original resolution images were ok.

ChrisG · 2015-12-18 18:18:46

This is what I would try. Use that one ram stick you know works. Then add only one ram stick to it after install. See if it is stable. If no, take it out and try another one. If yes, then add another stick to it and see if it stays stable. etc., etc. I believe your system is okay but seems as though Arch doesn't like one or more of your ram sticks. Possibly the way the kernel is built. The Arch repository has custom kernels. Maybe there is one for the Lenovo D20.

ewaller · 2015-12-18 18:21:22

ChrisG, that is a very good suggestion. It might not be deterministic though -- not all memory problems are the fault of the memory. But definitely worth trying.

elninja · 2015-12-18 18:36:51

Thank you ewaller for the Microcode suggestion, it seems to be right on the money.

**These updates provide bug fixes that can be critical to the stability of your system. Without these updates, you may experience spurious crashes or unexpected system halts that can be difficult to track down.**

I've tried checking each of the RAM sticks, adding one by one, changing it up. The errors come and go, at least with 1 4GB stick the system is stable.
I doubt is the RAM since Memtest86+ checks out.

ChrisG · 2015-12-18 18:38:28

Did the microcode install fix your problem?

graysky · 2015-12-18 18:46:34

I could be mistaken, but mt86+ hasn't been updated in 2 years... mt86 on the other hand is actively being developed (http://www.memtest86.com/). Just for shits and giggles, run this using all of your CPU cores. Recommended is 4 full cycles. If you get no errors, I think we can safely rule out bad DIMM(s), Also:

1) What is the output of

lscpu

2) What is the output of

dmesg | grep microcode

EDIT: The intel-ucode package in [extra] is actually dated. You might want to install the latest version after you run memtest86. Are you familiar with ABS enough to build it yourself?

EDIT2: Here is a patch you may use against the PKGBUILD that will direct it to the current version.

Last edited by graysky (2015-12-18 18:53:01)

elninja · 2015-12-18 18:51:12

Haven't tested yet. I'm at work right now.

I will respond this evening with the output.

Edit: Thank you for the detailed instructions, I'll build it tonight.

Last edited by elninja (2015-12-18 18:59:26)

Slithery · 2015-12-18 18:52:20

graysky wrote:

Recommended is 4 full cycles.

I usually let it run for even longer, usually at least overnight.

I've had RAM with a sporadic fault that's only shown up on the 12th pass before.

graysky · 2015-12-18 18:53:28

elninja wrote:

Haven't tested yet. I'm at work right now.
I will respond this evening with the output.

Make sure that you update your bootloader's config file after installing the intel-ucode package so that it is actually being applied. See my post above which I edited for some instructions.

elninja · 2015-12-19 03:57:31

@greysky I used your patch and installed the microcode update, here's the info you asked for.
Meanwhile I will test the microcode and RAM modules with mt86

Before installation of microcode @ 8GB

[elninja@quetzalcoatl ~]$ lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                12
On-line CPU(s) list:   0-11
Thread(s) per core:    2
Core(s) per socket:    6
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 44
Model name:            Intel(R) Xeon(R) CPU           X5670  @ 2.93GHz
Stepping:              2
CPU MHz:               1596.000
CPU max MHz:           2927.0000
CPU min MHz:           1596.0000
BogoMIPS:              5869.33
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              12288K
NUMA node0 CPU(s):     0-11
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid

[elninja@quetzalcoatl ~]$ dmesg | grep microcode
[    1.203836] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203842] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203848] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203855] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203861] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203867] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203872] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203878] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203883] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203888] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203893] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203898] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x1a
[    1.203935] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

After installation of microcode @ 16GB

[elninja@quetzalcoatl ~]$ lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                12
On-line CPU(s) list:   0-11
Thread(s) per core:    2
Core(s) per socket:    6
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 44
Model name:            Intel(R) Xeon(R) CPU           X5670  @ 2.93GHz
Stepping:              2
CPU MHz:               1596.000
CPU max MHz:           2927.0000
CPU min MHz:           1596.0000
BogoMIPS:              5869.28
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              12288K
NUMA node0 CPU(s):     0-11
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid


[elninja@quetzalcoatl ~]$ dmesg | grep microcode
[    1.205765] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205771] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205777] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205782] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205788] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205794] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205800] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205806] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205811] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205817] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205821] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205826] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x1a
[    1.205865] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[elninja@quetzalcoatl ~]$

System right now seems to be running stable with 16GB (as it was before) I'm going to memtest it all night long.
I've ordered online 48GB Registered ECC RAM to see if it can cope.

Last edited by elninja (2015-12-19 04:32:02)

graysky · 2015-12-19 12:16:21

The output of `lscpu` shouldn't change with different memory. The output of `mdesg | grep microcode` is different from what I would expect. To me, it implies that either you're not loading it or that there is nothing available for your CPU. Compare to mine on Haswell chip:

% dmesg | grep microcode
[    0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
[    0.051575] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
[    0.069114] microcode: CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
[    0.086574] microcode: CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
[    0.221388] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e
[    0.221393] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e
[    0.221398] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e
[    0.221403] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e
[    0.221408] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1e
[    0.221412] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1e
[    0.221416] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1e
[    0.221420] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1e
[    0.221458] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

I don't see any "updated early to" for your output. Are you booting with grub? If so, post the output of (run from root):

grep initrd /boot/grub/grub.cfg

Last edited by graysky (2015-12-19 12:17:26)

elninja · 2015-12-19 18:36:10

I'm booting with syslinux, as far as I'm aware, it boots ok.

My syslinux.cfg, lscpu, dmesg | grep microcode

[elninja@quetzalcoatl ~]$ cat /boot/syslinux/syslinux.cfg 
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
#
# Comboot modules:
#   * menu.c32 - provides a text menu
#   * vesamenu.c32 - provides a graphical menu
#   * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
#   * hdt.c32 - hardware detection tool
#   * reboot.c32 - reboots the system
#
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
#
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
#
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples

DEFAULT arch
PROMPT 1        # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl

# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32

# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border       30;44   #40ffffff #a0000000 std
MENU COLOR title        1;36;44 #9033ccff #a0000000 std
MENU COLOR sel          7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel        37;44   #50ffffff #a0000000 std
MENU COLOR help         37;40   #c0ffffff #a0000000 std
MENU COLOR timeout_msg  37;40   #80ffffff #00000000 std
MENU COLOR timeout      1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07        37;40   #90ffffff #a0000000 std
MENU COLOR tabmsg       31;40   #30ffffff #00000000 std

# boot sections follow
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*

LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=/dev/sdb4 rw
    INITRD ../intel-ucode.img,../initramfs-linux.img

LABEL archfallback
    MENU LABEL Arch Linux Fallback
    LINUX ../vmlinuz-linux
    APPEND root=/dev/sdb4 rw
    INITRD ../initramfs-linux-fallback.img

LABEL windows
        MENU LABEL Windows 10
        COM32 chain.c32
        APPEND hd0 1

LABEL hdt
        MENU LABEL HDT (Hardware Detection Tool)
        COM32 hdt.c32

LABEL reboot
        MENU LABEL Reboot
        COM32 reboot.c32

LABEL poweroff
        MENU LABEL Poweroff
        COM32 poweroff.c32

[elninja@quetzalcoatl ~]$ dmesg | grep microcode
[    1.211882] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211888] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211894] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211899] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211905] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211911] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211917] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211923] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211927] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211933] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211938] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211943] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x1a
[    1.211984] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

## Checking that the package is installed
[elninja@quetzalcoatl ~]$ sudo pacman -Qk intel-ucode
[sudo] password for elninja: 
intel-ucode: 7 total files, 0 missing files

I completed almost 13 hours of memtest and not a single error. I rebooted into Arch linux and got another kernel panic, I retried a few times and I'm logged in and answering.
I'm running two terminals and firefox on gnome. If Firefox starts using to much memory it crashes >.> (when opening google drive and imgur for uploading a photo of the stable RAM)

Photo of Memtest86

Kernel errors:

[elninja@quetzalcoatl ~]$ sudo cat /proc/kmsg
<6>[    0.000000] Initializing cgroup subsys cpuset
<6>[    0.000000] Initializing cgroup subsys cpu
<6>[    0.000000] Initializing cgroup subsys cpuacct
<5>[    0.000000] Linux version 4.2.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015
<6>[    0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb4 rw initrd=../intel-ucode.img,../initramfs-linux.img
<6>[    0.000000] x86/fpu: Legacy x87 FPU detected.
<6>[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
<6>[    0.000000] e820: BIOS-provided physical RAM map:
<6>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000000d6000-0x00000000000d7fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df79ffff] usable
<6>[    0.000000] BIOS-e820: [mem 0x00000000df7a0000-0x00000000df7c6fff] ACPI data
<6>[    0.000000] BIOS-e820: [mem 0x00000000df7c7000-0x00000000df7c8fff] ACPI NVS
<6>[    0.000000] BIOS-e820: [mem 0x00000000df7c9000-0x00000000dfffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] SMBIOS 2.6 present.
<7>[    0.000000] DMI: LENOVO 4158CM1/LENOVO, BIOS 61KT50AUS 01/14/2014
<7>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[    0.000000] e820: last_pfn = 0x420000 max_arch_pfn = 0x400000000
<7>[    0.000000] MTRR default type: uncachable
<7>[    0.000000] MTRR fixed ranges enabled:
<7>[    0.000000]   00000-9FFFF write-back
<7>[    0.000000]   A0000-BFFFF uncachable
<7>[    0.000000]   C0000-CFFFF write-protect
<7>[    0.000000]   D0000-DFFFF uncachable
<7>[    0.000000]   E0000-FFFFF write-protect
<7>[    0.000000] MTRR variable ranges enabled:
<7>[    0.000000]   0 base 00E0000000 mask FFE0000000 uncachable
<7>[    0.000000]   1 base 0000000000 mask FC00000000 write-back
<7>[    0.000000]   2 base 0400000000 mask FFE0000000 write-back
<7>[    0.000000]   3 disabled
<7>[    0.000000]   4 disabled
<7>[    0.000000]   5 disabled
<7>[    0.000000]   6 disabled
<7>[    0.000000]   7 disabled
<7>[    0.000000]   8 disabled
<7>[    0.000000]   9 disabled
<6>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
<7>[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
<6>[    0.000000] e820: last_pfn = 0xdf7a0 max_arch_pfn = 0x400000000
<6>[    0.000000] found SMP MP-table at [mem 0x000f6a70-0x000f6a7f] mapped at [ffff8800000f6a70]
<6>[    0.000000] Scanning 1 areas for low memory corruption
<7>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
<6>[    0.000000] Using GB pages for direct mapping
<6>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
<7>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
<7>[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
<7>[    0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
<7>[    0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
<6>[    0.000000] init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
<7>[    0.000000]  [mem 0x41fe00000-0x41fffffff] page 2M
<7>[    0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
<6>[    0.000000] init_memory_mapping: [mem 0x400000000-0x41fdfffff]
<7>[    0.000000]  [mem 0x400000000-0x41fdfffff] page 2M
<6>[    0.000000] init_memory_mapping: [mem 0x00100000-0xdf79ffff]
<7>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
<7>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
<7>[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
<7>[    0.000000]  [mem 0xc0000000-0xdf5fffff] page 2M
<7>[    0.000000]  [mem 0xdf600000-0xdf79ffff] page 4k
<6>[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
<7>[    0.000000]  [mem 0x100000000-0x3ffffffff] page 1G
<6>[    0.000000] RAMDISK: [mem 0x7fbd1000-0x7fffffff]
<6>[    0.000000] ACPI: Early table checksum verification disabled
<4>[    0.000000] ACPI: RSDP 0x00000000000F6A40 000024 (v02 PTLTD )
<4>[    0.000000] ACPI: XSDT 0x00000000DF7BC2DB 000084 (v01 LENOVO TC-61    060400D0  LTP 00000000)
<4>[    0.000000] ACPI: FACP 0x00000000DF7C681D 0000F4 (v03 LENOVO TC-61    060400D0 PTL  00000002)
<4>[    0.000000] ACPI: DSDT 0x00000000DF7BC35F 00A43A (v01 LENOVO TC-61    060400D0 MSFT 0100000E)
<4>[    0.000000] ACPI: FACS 0x00000000DF7C8FC0 000040
<4>[    0.000000] ACPI: FACS 0x00000000DF7C8FC0 000040
<4>[    0.000000] ACPI: SSDT 0x00000000DF7AC287 004E90 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
<4>[    0.000000] ACPI: SLIT 0x00000000DF7C6935 000030 (v01 Intel  TYLERBRG 060400D0 LOHR 0000005A)
<4>[    0.000000] ACPI: TCPA 0x00000000DF7C6965 000032 (v01 LENOVO TC-61    060400D0 PTL  00000000)
<4>[    0.000000] ACPI: SLIC 0x00000000DF7C6997 000176 (v01 LENOVO TC-61    060400D0  LTP 00000000)
<4>[    0.000000] ACPI: SRAT 0x00000000DF7C6B0D 000140 (v01 Intel  Tylerbrg 060400D0 PHX. 00000001)
<4>[    0.000000] ACPI: DMAR 0x00000000DF7C6C4D 0001C0 (v01 Intel  OEMDMAR  060400D0 LOHR 00000001)
<4>[    0.000000] ACPI: APIC 0x00000000DF7C6E0D 0000F4 (v01 PTLTD  ? APIC   060400D0  LTP 00000000)
<4>[    0.000000] ACPI: MCFG 0x00000000DF7C6F01 00003C (v01 PTLTD    MCFG   060400D0  LTP 00000000)
<4>[    0.000000] ACPI: HPET 0x00000000DF7C6F3D 000038 (v01 PTLTD  HPETTBL  060400D0  LTP 00000001)
<4>[    0.000000] ACPI: BOOT 0x00000000DF7C6F75 000028 (v01 PTLTD  $SBFTBL$ 060400D0  LTP 00000001)
<4>[    0.000000] ACPI: ASF! 0x00000000DF7C6F9D 000063 (v32 LENOVO TC-61    060400D0 PTL  00000001)
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0
<6>[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0xdfffffff]
<6>[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x41fffffff]
<7>[    0.000000] NUMA: Initialized distance table, cnt=1
<6>[    0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x41fffffff] -> [mem 0x00000000-0x41fffffff]
<6>[    0.000000] NODE_DATA(0) allocated [mem 0x41fff9000-0x41fffcfff]
<7>[    0.000000]  [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0
<6>[    0.000000] Zone ranges:
<6>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
<6>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
<6>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041fffffff]
<6>[    0.000000] Movable zone start for each node
<6>[    0.000000] Early memory node ranges
<6>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000099fff]
<6>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000df79ffff]
<6>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041fffffff]
<6>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fffffff]
<7>[    0.000000] On node 0 totalpages: 4192057
<7>[    0.000000]   DMA zone: 64 pages used for memmap
<7>[    0.000000]   DMA zone: 21 pages reserved
<7>[    0.000000]   DMA zone: 3993 pages, LIFO batch:0
<7>[    0.000000]   DMA32 zone: 14239 pages used for memmap
<7>[    0.000000]   DMA32 zone: 911264 pages, LIFO batch:31
<7>[    0.000000]   Normal zone: 51200 pages used for memmap
<7>[    0.000000]   Normal zone: 3276800 pages, LIFO batch:31
<6>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
<6>[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[    0.000000] ACPI: IRQ0 used by override.
<7>[    0.000000] ACPI: IRQ9 used by override.
<6>[    0.000000] Using ACPI (MADT) for SMP configuration information
<6>[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
<6>[    0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
<6>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d5fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x000d6000-0x000d7fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x000d8000-0x000dffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xdf7a0000-0xdf7c6fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xdf7c7000-0xdf7c8fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xdf7c9000-0xdfffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
<6>[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
<6>[    0.000000] Booting paravirtualized kernel on bare hardware
<6>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
<6>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:12 nr_node_ids:1
<6>[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88041fc00000 s91480 r8192 d31400 u131072
<7>[    0.000000] pcpu-alloc: s91480 r8192 d31400 u131072 alloc=1*2097152
<7>[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- 
<6>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4126533
<6>[    0.000000] Policy zone: Normal
<5>[    0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb4 rw initrd=../intel-ucode.img,../initramfs-linux.img
<6>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<7>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
<7>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
<6>[    0.000000] Memory: 16422352K/16768228K available (5611K kernel code, 922K rwdata, 1768K rodata, 1180K init, 1152K bss, 345876K reserved, 0K cma-reserved)
<6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
<6>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=12.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=12
<6>[    0.000000] NR_IRQS:8448 nr_irqs:520 16
<6>[    0.000000] Console: colour VGA+ 80x25
<6>[    0.000000] console [tty0] enabled
<6>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
<7>[    0.000000] hpet clockevent registered
<6>[    0.000000] tsc: Fast TSC calibration using PIT
<6>[    0.000000] tsc: Detected 2933.407 MHz processor
<6>[    0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 5869.26 BogoMIPS (lpj=9778023)
<6>[    0.000028] pid_max: default: 32768 minimum: 301
<6>[    0.000033] ACPI: Core revision 20150619
<4>[    0.005740] ACPI: All ACPI Tables successfully acquired
<6>[    0.005760] Security Framework initialized
<6>[    0.005762] Yama: becoming mindful.
<6>[    0.006618] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
<6>[    0.009737] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
<6>[    0.011109] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>[    0.011124] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>[    0.011354] Initializing cgroup subsys blkio
<6>[    0.011357] Initializing cgroup subsys memory
<6>[    0.011363] Initializing cgroup subsys devices
<6>[    0.011365] Initializing cgroup subsys freezer
<6>[    0.011366] Initializing cgroup subsys net_cls
<6>[    0.011382] CPU: Physical Processor ID: 0
<6>[    0.011382] CPU: Processor Core ID: 0
<4>[    0.011390] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<4>[    0.011391] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
<6>[    0.011393] mce: CPU supports 9 MCE banks
<6>[    0.011402] CPU0: Thermal monitoring enabled (TM1)
<6>[    0.011407] process: using mwait in idle threads
<6>[    0.011413] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
<6>[    0.011414] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
<6>[    0.011647] Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
<6>[    0.021515] mce: [Hardware Error]: Machine check events logged
<6>[    0.021526] ftrace: allocating 22161 entries in 87 pages
<6>[    0.021563] mce: [Hardware Error]: Machine check events logged
<5>[    0.026062] CMCI storm detected: switching to poll mode
<6>[    0.030502] DMAR: Host address width 40
<6>[    0.030504] DMAR: DRHD base: 0x000000fe710000 flags: 0x1
<6>[    0.030512] DMAR: dmar0: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap f02077
<6>[    0.030513] DMAR: RMRR base: 0x000000df7cd000 end: 0x000000df7dbfff
<6>[    0.030514] DMAR: RMRR base: 0x000000df7e4000 end: 0x000000df7e4fff
<6>[    0.030516] DMAR: RMRR base: 0x000000df7e5000 end: 0x000000df7e5fff
<6>[    0.030517] DMAR: RMRR base: 0x000000df7ea000 end: 0x000000df7eafff
<6>[    0.030518] DMAR: RMRR base: 0x000000df7e6000 end: 0x000000df7e6fff
<6>[    0.030519] DMAR: RMRR base: 0x000000df7e7000 end: 0x000000df7e7fff
<6>[    0.030519] DMAR: RMRR base: 0x000000df7e8000 end: 0x000000df7e8fff
<6>[    0.030520] DMAR: RMRR base: 0x000000df7e9000 end: 0x000000df7e9fff
<6>[    0.030521] DMAR: RMRR base: 0x000000df7eb000 end: 0x000000df7ebfff
<6>[    0.030522] DMAR: ATSR flags: 0x0
<6>[    0.030525] Switched APIC routing to physical flat.
<6>[    0.030894] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<4>[    0.972055] APIC calibration not consistent with PM-Timer: 903ms instead of 100ms
<6>[    0.972056] APIC delta adjusted to PM-Timer: 833361 (7528002)
<6>[    0.972061] smpboot: CPU0: Intel(R) Xeon(R) CPU           X5670  @ 2.93GHz (fam: 06, model: 2c, stepping: 02)
<6>[    0.972079] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
<4>[    0.972094] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
<6>[    0.972096] ... version:                3
<6>[    0.972097] ... bit width:              48
<6>[    0.972097] ... generic registers:      4
<6>[    0.972098] ... value mask:             0000ffffffffffff
<6>[    0.972099] ... max period:             000000007fffffff
<6>[    0.972100] ... fixed-purpose events:   3
<6>[    0.972101] ... event mask:             000000070000000f
<6>[    0.985454] x86: Booting SMP configuration:
<6>[    0.985459] .... node  #0, CPUs:        #1
<6>[    0.988887] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
<4>[    0.992113]   #2
<4>[    0.993246] ------------[ cut here ]------------
<4>[    0.993252] WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:1376 __queue_work+0x28b/0x390()
<4>[    0.993253] Modules linked in:
<4>[    0.993255] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.2.5-1-ARCH #1
<4>[    0.993256] Hardware name: LENOVO 4158CM1/LENOVO, BIOS 61KT50AUS 01/14/2014
<4>[    0.993257]  0000000000000000 d1c33195e2ca7ff3 ffff88040d64fcb8 ffffffff81570d0a
<4>[    0.993258]  0000000000000000 0000000000000000 ffff88040d64fcf8 ffffffff810748a6
<4>[    0.993260]  0000000000000000 ffff88041fc59400 0000000000000080 ffff88040f088e00
<4>[    0.993261] Call Trace:
<4>[    0.993266]  [<ffffffff81570d0a>] dump_stack+0x4c/0x6e
<4>[    0.993268]  [<ffffffff810748a6>] warn_slowpath_common+0x86/0xc0
<4>[    0.993269]  [<ffffffff810749da>] warn_slowpath_null+0x1a/0x20
<4>[    0.993270]  [<ffffffff8108b42b>] __queue_work+0x28b/0x390
<4>[    0.993272]  [<ffffffff8108b55b>] queue_work_on+0x2b/0x50
<4>[    0.993275]  [<ffffffff8103f759>] mce_schedule_work.part.1+0x29/0x30
<4>[    0.993276]  [<ffffffff8104032f>] machine_check_poll+0x24f/0x270
<4>[    0.993278]  [<ffffffff81040392>] __mcheck_cpu_init_generic+0x42/0x120
<4>[    0.993279]  [<ffffffff81041759>] mcheck_cpu_init+0x169/0x4a0
<4>[    0.993281]  [<ffffffff81027cb4>] identify_cpu+0x334/0x3a0
<4>[    0.993282]  [<ffffffff81027d32>] identify_secondary_cpu+0x12/0x20
<4>[    0.993284]  [<ffffffff8104cb2f>] smp_store_cpu_info+0x3f/0x50
<4>[    0.993286]  [<ffffffff8104d0bb>] start_secondary+0x8b/0x1c0
<4>[    0.993290] ---[ end trace cd00c2b456bd149a ]---
<4>[    0.995434]   #3  #4  #5  #6  #7  #8  #9 #10 #11
<6>[    1.035340] x86: Booted up 1 node, 12 CPUs
<6>[    1.035345] smpboot: Total of 12 processors activated (70429.17 BogoMIPS)
<6>[    1.048799] devtmpfs: initialized
<6>[    1.051929] PM: Registering ACPI NVS region [mem 0xdf7c7000-0xdf7c8fff] (8192 bytes)
<6>[    1.052013] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
<6>[    1.052093] pinctrl core: initialized pinctrl subsystem
<6>[    1.052131] RTC time: 18:22:13, date: 12/19/15
<6>[    1.052229] NET: Registered protocol family 16
<6>[    1.062045] cpuidle: using governor ladder
<6>[    1.075373] cpuidle: using governor menu
<6>[    1.075402] Simple Boot Flag at 0x47 set to 0x1
<6>[    1.075439] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
<6>[    1.075440] ACPI: bus type PCI registered
<6>[    1.075441] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[    1.075500] PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xf8000000-0xf89fffff] (base 0xf8000000)
<6>[    1.075502] PCI: MMCONFIG at [mem 0xf8000000-0xf89fffff] reserved in E820
<4>[    1.075508] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
<6>[    1.075527] PCI: Using configuration type 1 for base access
<6>[    1.089003] ACPI: Added _OSI(Module Device)
<6>[    1.089005] ACPI: Added _OSI(Processor Device)
<6>[    1.089006] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    1.089007] ACPI: Added _OSI(Processor Aggregator Device)
<6>[    1.092874] ACPI: Interpreter enabled
<4>[    1.092878] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
<4>[    1.092882] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
<6>[    1.092892] ACPI: (supports S0 S3 S4 S5)
<6>[    1.092893] ACPI: Using IOAPIC for interrupt routing
<6>[    1.092912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    1.097712] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
<6>[    1.097717] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
<6>[    1.097895] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
<6>[    1.097896] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
<6>[    1.098207] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-09] only partially covers this bridge
<6>[    1.098357] PCI host bridge to bus 0000:00
<6>[    1.098360] pci_bus 0000:00: root bus resource [bus 00-ff]
<6>[    1.098362] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
<6>[    1.098363] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
<6>[    1.098365] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[    1.098366] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
<6>[    1.098368] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
<6>[    1.098369] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfdffffff window]
<7>[    1.098379] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
<7>[    1.098426] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
<7>[    1.098491] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
<7>[    1.098536] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
<6>[    1.098571] pci 0000:00:01.0: System wakeup disabled by ACPI
<7>[    1.098606] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
<7>[    1.098651] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
<6>[    1.098689] pci 0000:00:03.0: System wakeup disabled by ACPI
<7>[    1.098727] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
<7>[    1.098770] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[    1.098806] pci 0000:00:07.0: System wakeup disabled by ACPI
<7>[    1.098843] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
<7>[    1.098936] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
<7>[    1.099026] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
<7>[    1.099121] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
<7>[    1.099138] pci 0000:00:16.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.099220] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
<7>[    1.099236] pci 0000:00:16.1: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.099318] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
<7>[    1.099334] pci 0000:00:16.2: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.099416] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
<7>[    1.099432] pci 0000:00:16.3: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.099514] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
<7>[    1.099530] pci 0000:00:16.4: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.099612] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
<7>[    1.099628] pci 0000:00:16.5: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.099710] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
<7>[    1.099726] pci 0000:00:16.6: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.099807] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
<7>[    1.099823] pci 0000:00:16.7: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.099908] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
<7>[    1.099949] pci 0000:00:1a.0: reg 0x20: [io  0x1800-0x181f]
<6>[    1.100017] pci 0000:00:1a.0: System wakeup disabled by ACPI
<7>[    1.100051] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
<7>[    1.100093] pci 0000:00:1a.1: reg 0x20: [io  0x1820-0x183f]
<6>[    1.100159] pci 0000:00:1a.1: System wakeup disabled by ACPI
<7>[    1.100200] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
<7>[    1.100226] pci 0000:00:1a.7: reg 0x10: [mem 0xf0f04000-0xf0f043ff]
<7>[    1.100287] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
<6>[    1.100324] pci 0000:00:1a.7: System wakeup disabled by ACPI
<7>[    1.100360] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
<7>[    1.100384] pci 0000:00:1b.0: reg 0x10: [mem 0xf0f00000-0xf0f03fff 64bit]
<7>[    1.100435] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<7>[    1.100498] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
<7>[    1.100551] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[    1.100588] pci 0000:00:1c.0: System wakeup disabled by ACPI
<7>[    1.100625] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
<7>[    1.100682] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[    1.100718] pci 0000:00:1c.4: System wakeup disabled by ACPI
<7>[    1.100752] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
<7>[    1.100809] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
<6>[    1.100845] pci 0000:00:1c.5: System wakeup disabled by ACPI
<7>[    1.100882] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
<7>[    1.100953] pci 0000:00:1d.0: reg 0x20: [io  0x1840-0x185f]
<6>[    1.101037] pci 0000:00:1d.0: System wakeup disabled by ACPI
<7>[    1.101071] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
<7>[    1.101112] pci 0000:00:1d.1: reg 0x20: [io  0x1860-0x187f]
<6>[    1.101179] pci 0000:00:1d.1: System wakeup disabled by ACPI
<7>[    1.101215] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
<7>[    1.101285] pci 0000:00:1d.2: reg 0x20: [io  0x1880-0x189f]
<6>[    1.101368] pci 0000:00:1d.2: System wakeup disabled by ACPI
<7>[    1.101405] pci 0000:00:1d.3: [8086:3a39] type 00 class 0x0c0300
<7>[    1.101475] pci 0000:00:1d.3: reg 0x20: [io  0x18a0-0x18bf]
<6>[    1.101559] pci 0000:00:1d.3: System wakeup disabled by ACPI
<7>[    1.101598] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
<7>[    1.101624] pci 0000:00:1d.7: reg 0x10: [mem 0xf0f05000-0xf0f053ff]
<7>[    1.101685] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<6>[    1.101722] pci 0000:00:1d.7: System wakeup disabled by ACPI
<7>[    1.101753] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
<6>[    1.101822] pci 0000:00:1e.0: System wakeup disabled by ACPI
<7>[    1.101855] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
<7>[    1.101999] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
<7>[    1.102021] pci 0000:00:1f.2: reg 0x10: [io  0x18f0-0x18f7]
<7>[    1.102031] pci 0000:00:1f.2: reg 0x14: [io  0x18e4-0x18e7]
<7>[    1.102037] pci 0000:00:1f.2: reg 0x18: [io  0x18e8-0x18ef]
<7>[    1.102044] pci 0000:00:1f.2: reg 0x1c: [io  0x18e0-0x18e3]
<7>[    1.102050] pci 0000:00:1f.2: reg 0x20: [io  0x18c0-0x18df]
<7>[    1.102057] pci 0000:00:1f.2: reg 0x24: [mem 0xf0f06000-0xf0f067ff]
<7>[    1.102081] pci 0000:00:1f.2: PME# supported from D3hot
<7>[    1.102145] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
<7>[    1.102160] pci 0000:00:1f.3: reg 0x10: [mem 0xf0f07000-0xf0f070ff 64bit]
<7>[    1.102178] pci 0000:00:1f.3: reg 0x20: [io  0x1100-0x111f]
<7>[    1.102295] pci 0000:01:00.0: [11ab:6485] type 00 class 0x010400
<7>[    1.102328] pci 0000:01:00.0: reg 0x18: [io  0x2000-0x207f]
<7>[    1.102345] pci 0000:01:00.0: reg 0x20: [mem 0xf0900000-0xf090ffff 64bit]
<7>[    1.102352] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
<7>[    1.102373] pci 0000:01:00.0: supports D1
<7>[    1.102374] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
<6>[    1.102392] pci 0000:01:00.0: System wakeup disabled by ACPI
<6>[    1.108709] pci 0000:00:01.0: PCI bridge to [bus 01]
<7>[    1.108714] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
<7>[    1.108720] pci 0000:00:01.0:   bridge window [mem 0xf0900000-0xf09fffff]
<7>[    1.108771] pci 0000:02:00.0: [1002:67b0] type 00 class 0x030000
<7>[    1.108799] pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
<7>[    1.108810] pci 0000:02:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
<7>[    1.108817] pci 0000:02:00.0: reg 0x20: [io  0x3000-0x30ff]
<7>[    1.108824] pci 0000:02:00.0: reg 0x24: [mem 0xf0800000-0xf083ffff]
<7>[    1.108832] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
<7>[    1.108864] pci 0000:02:00.0: supports D1 D2
<7>[    1.108866] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
<6>[    1.108893] pci 0000:02:00.0: System wakeup disabled by ACPI
<7>[    1.108929] pci 0000:02:00.1: [1002:aac8] type 00 class 0x040300
<7>[    1.108956] pci 0000:02:00.1: reg 0x10: [mem 0xf0840000-0xf0843fff 64bit]
<7>[    1.109010] pci 0000:02:00.1: supports D1 D2
<6>[    1.115374] pci 0000:00:03.0: PCI bridge to [bus 02]
<7>[    1.115379] pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
<7>[    1.115383] pci 0000:00:03.0:   bridge window [mem 0xf0800000-0xf08fffff]
<7>[    1.115389] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
<6>[    1.115441] pci 0000:00:07.0: PCI bridge to [bus 03]
<7>[    1.115444] pci 0000:00:07.0:   bridge window [io  0x0000-0x0fff]
<6>[    1.115489] pci 0000:00:1c.0: PCI bridge to [bus 04]
<7>[    1.115492] pci 0000:00:1c.0:   bridge window [io  0x0000-0x0fff]
<7>[    1.115555] pci 0000:05:00.0: [14e4:167b] type 00 class 0x020000
<7>[    1.115600] pci 0000:05:00.0: reg 0x10: [mem 0xf0a00000-0xf0a0ffff 64bit]
<7>[    1.115698] pci 0000:05:00.0: PME# supported from D3hot D3cold
<6>[    1.122040] pci 0000:00:1c.4: PCI bridge to [bus 05]
<7>[    1.122050] pci 0000:00:1c.4:   bridge window [mem 0xf0a00000-0xf0afffff]
<7>[    1.122108] pci 0000:06:00.0: [111d:8039] type 01 class 0x060400
<7>[    1.122196] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
<6>[    1.128703] pci 0000:00:1c.5: PCI bridge to [bus 06-09]
<7>[    1.128714] pci 0000:00:1c.5:   bridge window [mem 0xf0b00000-0xf0bfffff]
<7>[    1.128772] pci 0000:07:02.0: [111d:8039] type 01 class 0x060400
<7>[    1.128870] pci 0000:07:02.0: PME# supported from D0 D3hot D3cold
<7>[    1.128923] pci 0000:07:03.0: [111d:8039] type 01 class 0x060400
<7>[    1.129019] pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
<6>[    1.129095] pci 0000:06:00.0: PCI bridge to [bus 07-09]
<7>[    1.129105] pci 0000:06:00.0:   bridge window [mem 0xf0b00000-0xf0bfffff]
<6>[    1.129154] pci 0000:07:02.0: PCI bridge to [bus 08]
<7>[    1.129236] pci 0000:09:00.0: [14e4:167a] type 00 class 0x020000
<7>[    1.129295] pci 0000:09:00.0: reg 0x10: [mem 0xf0b00000-0xf0b0ffff 64bit]
<7>[    1.129425] pci 0000:09:00.0: PME# supported from D3hot D3cold
<6>[    1.135374] pci 0000:07:03.0: PCI bridge to [bus 09]
<7>[    1.135388] pci 0000:07:03.0:   bridge window [mem 0xf0b00000-0xf0bfffff]
<7>[    1.135461] pci 0000:0a:0a.0: [104c:8023] type 00 class 0x0c0010
<7>[    1.135482] pci 0000:0a:0a.0: reg 0x10: [mem 0xf0c04000-0xf0c047ff]
<7>[    1.135491] pci 0000:0a:0a.0: reg 0x14: [mem 0xf0c00000-0xf0c03fff]
<7>[    1.135547] pci 0000:0a:0a.0: supports D1 D2
<7>[    1.135548] pci 0000:0a:0a.0: PME# supported from D0 D1 D2 D3hot
<6>[    1.135603] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
<7>[    1.135607] pci 0000:00:1e.0:   bridge window [mem 0xf0c00000-0xf0cfffff]
<7>[    1.135612] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
<7>[    1.135614] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
<7>[    1.135616] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
<7>[    1.135617] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
<7>[    1.135619] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
<7>[    1.135620] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfdffffff window] (subtractive decode)
<6>[    1.135902] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
<6>[    1.135940] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
<6>[    1.135977] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
<6>[    1.136014] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
<6>[    1.136051] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
<6>[    1.136088] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 *5 6 7 10 11 14 15)
<6>[    1.136125] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
<6>[    1.136162] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
<4>[    1.136432] ACPI: Enabled 2 GPEs in block 00 to 3F
<6>[    1.136550] vgaarb: setting as boot device: PCI:0000:02:00.0
<6>[    1.136552] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
<6>[    1.136554] vgaarb: loaded
<6>[    1.136555] vgaarb: bridge control possible 0000:02:00.0
<6>[    1.136623] PCI: Using ACPI for IRQ routing
<7>[    1.136626] PCI: pci_cache_line_size set to 64 bytes
<7>[    1.136706] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff]
<7>[    1.136707] e820: reserve RAM buffer [mem 0xdf7a0000-0xdfffffff]
<6>[    1.136800] NetLabel: Initializing
<6>[    1.136801] NetLabel:  domain hash size = 128
<6>[    1.136802] NetLabel:  protocols = UNLABELED CIPSOv4
<6>[    1.136813] NetLabel:  unlabeled traffic allowed by default
<6>[    1.136834] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
<6>[    1.136837] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
<6>[    1.138867] clocksource: Switched to clocksource hpet
<6>[    1.143472] pnp: PnP ACPI init
<7>[    1.143533] pnp 00:00: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
<6>[    1.143713] system 00:01: [io  0x04d0-0x04d1] has been reserved
<6>[    1.143715] system 00:01: [io  0x0290-0x029f] has been reserved
<6>[    1.143717] system 00:01: [io  0x0800-0x080f] has been reserved
<6>[    1.143719] system 00:01: [io  0x1000-0x107f] could not be reserved
<6>[    1.143721] system 00:01: [io  0x1180-0x11bf] has been reserved
<6>[    1.143722] system 00:01: [io  0xfe00] has been reserved
<6>[    1.143724] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
<6>[    1.143726] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
<6>[    1.143728] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
<6>[    1.143730] system 00:01: [mem 0xfe800000-0xfe9fffff] has been reserved
<6>[    1.143731] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
<6>[    1.143733] system 00:01: [mem 0xfe710000-0xfe711fff] could not be reserved
<6>[    1.143735] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
<6>[    1.143737] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
<7>[    1.143739] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    1.143790] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[    1.143898] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
<6>[    1.144055] pnp: PnP ACPI: found 4 devices
<6>[    1.150316] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<7>[    1.150345] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
<7>[    1.150348] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
<7>[    1.150350] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
<7>[    1.150356] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
<7>[    1.150358] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
<7>[    1.150391] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 06-09] add_size 1000
<7>[    1.150393] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-09] add_size 200000 add_align 100000
<7>[    1.150408] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.150410] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.150412] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.150414] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.150415] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.150417] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.150419] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.150421] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.150422] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.150424] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.150426] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.150428] pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.150429] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.150431] pci 0000:00:1c.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
<6>[    1.150435] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0d00000-0xf0efffff]
<6>[    1.150439] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf1000000-0xf11fffff 64bit pref]
<6>[    1.150442] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf1200000-0xf13fffff 64bit pref]
<6>[    1.150446] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf1400000-0xf15fffff 64bit pref]
<6>[    1.150449] pci 0000:00:16.0: BAR 0: assigned [mem 0xf0f08000-0xf0f0bfff 64bit]
<6>[    1.150457] pci 0000:00:16.1: BAR 0: assigned [mem 0xf0f0c000-0xf0f0ffff 64bit]
<6>[    1.150464] pci 0000:00:16.2: BAR 0: assigned [mem 0xf0f10000-0xf0f13fff 64bit]
<6>[    1.150471] pci 0000:00:16.3: BAR 0: assigned [mem 0xf0f14000-0xf0f17fff 64bit]
<6>[    1.150479] pci 0000:00:16.4: BAR 0: assigned [mem 0xf0f18000-0xf0f1bfff 64bit]
<6>[    1.150486] pci 0000:00:16.5: BAR 0: assigned [mem 0xf0f1c000-0xf0f1ffff 64bit]
<6>[    1.150494] pci 0000:00:16.6: BAR 0: assigned [mem 0xf0f20000-0xf0f23fff 64bit]
<6>[    1.150501] pci 0000:00:16.7: BAR 0: assigned [mem 0xf0f24000-0xf0f27fff 64bit]
<6>[    1.150508] pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
<6>[    1.150510] pci 0000:00:1c.4: BAR 13: assigned [io  0x5000-0x5fff]
<6>[    1.150512] pci 0000:00:1c.5: BAR 13: assigned [io  0x6000-0x6fff]
<6>[    1.150516] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0940000-0xf097ffff pref]
<6>[    1.150517] pci 0000:00:01.0: PCI bridge to [bus 01]
<6>[    1.150519] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
<6>[    1.150523] pci 0000:00:01.0:   bridge window [mem 0xf0900000-0xf09fffff]
<6>[    1.150528] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0860000-0xf087ffff pref]
<6>[    1.150530] pci 0000:00:03.0: PCI bridge to [bus 02]
<6>[    1.150532] pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
<6>[    1.150535] pci 0000:00:03.0:   bridge window [mem 0xf0800000-0xf08fffff]
<6>[    1.150538] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
<6>[    1.150541] pci 0000:00:07.0: PCI bridge to [bus 03]
<6>[    1.150548] pci 0000:00:1c.0: PCI bridge to [bus 04]
<6>[    1.150550] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
<6>[    1.150554] pci 0000:00:1c.0:   bridge window [mem 0xf0d00000-0xf0efffff]
<6>[    1.150557] pci 0000:00:1c.0:   bridge window [mem 0xf1000000-0xf11fffff 64bit pref]
<6>[    1.150562] pci 0000:00:1c.4: PCI bridge to [bus 05]
<6>[    1.150564] pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]
<6>[    1.150567] pci 0000:00:1c.4:   bridge window [mem 0xf0a00000-0xf0afffff]
<6>[    1.150570] pci 0000:00:1c.4:   bridge window [mem 0xf1200000-0xf13fffff 64bit pref]
<6>[    1.150575] pci 0000:07:02.0: PCI bridge to [bus 08]
<6>[    1.150589] pci 0000:07:03.0: PCI bridge to [bus 09]
<6>[    1.150594] pci 0000:07:03.0:   bridge window [mem 0xf0b00000-0xf0bfffff]
<6>[    1.150604] pci 0000:06:00.0: PCI bridge to [bus 07-09]
<6>[    1.150610] pci 0000:06:00.0:   bridge window [mem 0xf0b00000-0xf0bfffff]
<6>[    1.150619] pci 0000:00:1c.5: PCI bridge to [bus 06-09]
<6>[    1.150622] pci 0000:00:1c.5:   bridge window [io  0x6000-0x6fff]
<6>[    1.150625] pci 0000:00:1c.5:   bridge window [mem 0xf0b00000-0xf0bfffff]
<6>[    1.150628] pci 0000:00:1c.5:   bridge window [mem 0xf1400000-0xf15fffff 64bit pref]
<6>[    1.150633] pci 0000:00:1e.0: PCI bridge to [bus 0a]
<6>[    1.150636] pci 0000:00:1e.0:   bridge window [mem 0xf0c00000-0xf0cfffff]
<7>[    1.150643] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
<7>[    1.150645] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
<7>[    1.150646] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<7>[    1.150648] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window]
<7>[    1.150649] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window]
<7>[    1.150651] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfdffffff window]
<7>[    1.150652] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
<7>[    1.150654] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
<7>[    1.150655] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
<7>[    1.150657] pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf08fffff]
<7>[    1.150658] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref]
<7>[    1.150660] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
<7>[    1.150661] pci_bus 0000:04: resource 1 [mem 0xf0d00000-0xf0efffff]
<7>[    1.150663] pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf11fffff 64bit pref]
<7>[    1.150664] pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
<7>[    1.150666] pci_bus 0000:05: resource 1 [mem 0xf0a00000-0xf0afffff]
<7>[    1.150667] pci_bus 0000:05: resource 2 [mem 0xf1200000-0xf13fffff 64bit pref]
<7>[    1.150669] pci_bus 0000:06: resource 0 [io  0x6000-0x6fff]
<7>[    1.150670] pci_bus 0000:06: resource 1 [mem 0xf0b00000-0xf0bfffff]
<7>[    1.150672] pci_bus 0000:06: resource 2 [mem 0xf1400000-0xf15fffff 64bit pref]
<7>[    1.150673] pci_bus 0000:07: resource 1 [mem 0xf0b00000-0xf0bfffff]
<7>[    1.150675] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0bfffff]
<7>[    1.150676] pci_bus 0000:0a: resource 1 [mem 0xf0c00000-0xf0cfffff]
<7>[    1.150678] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7 window]
<7>[    1.150679] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff window]
<7>[    1.150681] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff window]
<7>[    1.150682] pci_bus 0000:0a: resource 7 [mem 0x000d8000-0x000dbfff window]
<7>[    1.150684] pci_bus 0000:0a: resource 8 [mem 0x000dc000-0x000dffff window]
<7>[    1.150685] pci_bus 0000:0a: resource 9 [mem 0xe0000000-0xfdffffff window]
<6>[    1.150710] NET: Registered protocol family 2
<6>[    1.150894] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    1.151134] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>[    1.151279] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    1.151315] UDP hash table entries: 8192 (order: 6, 262144 bytes)
<6>[    1.151368] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
<6>[    1.151452] NET: Registered protocol family 1
<7>[    1.154454] pci 0000:02:00.0: Video device with shadowed ROM
<7>[    1.154470] PCI: CLS 64 bytes, default 64
<6>[    1.154512] Unpacking initramfs...
<6>[    1.211726] Freeing initrd memory: 4284K (ffff88007fbd1000 - ffff880080000000)
<6>[    1.211764] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[    1.211767] software IO TLB [mem 0xdb7a0000-0xdf7a0000] (64MB) mapped at [ffff8800db7a0000-ffff8800df79ffff]
<6>[    1.211882] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211888] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211894] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211899] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211905] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211911] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211917] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211923] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211927] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211933] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211938] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211943] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.211984] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
<6>[    1.212051] Scanning for low memory corruption every 60 seconds
<6>[    1.212359] futex hash table entries: 4096 (order: 6, 262144 bytes)
<5>[    1.212403] Initialise system trusted keyring
<6>[    1.212666] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<6>[    1.213929] zpool: loaded
<6>[    1.213931] zbud: loaded
<5>[    1.214077] VFS: Disk quotas dquot_6.6.0
<6>[    1.214110] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<5>[    1.214239] Key type big_key registered
<6>[    1.214345] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
<6>[    1.214399] io scheduler noop registered
<6>[    1.214402] io scheduler deadline registered
<6>[    1.214429] io scheduler cfq registered (default)
<6>[    1.215261] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
<7>[    1.216360] aer 0000:00:01.0:pcie02: service driver aer loaded
<7>[    1.216382] aer 0000:00:03.0:pcie02: service driver aer loaded
<7>[    1.216402] aer 0000:00:07.0:pcie02: service driver aer loaded
<6>[    1.216415] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
<6>[    1.216417] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
<7>[    1.216420] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
<6>[    1.216427] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
<6>[    1.216428] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
<6>[    1.216430] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
<7>[    1.216433] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
<6>[    1.216439] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
<7>[    1.216442] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
<6>[    1.216458] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
<7>[    1.216461] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
<6>[    1.216477] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
<6>[    1.216479] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
<7>[    1.216482] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
<6>[    1.216498] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
<6>[    1.216499] pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
<6>[    1.216501] pcieport 0000:07:02.0: Signaling PME through PCIe PME interrupt
<6>[    1.216502] pcieport 0000:07:03.0: Signaling PME through PCIe PME interrupt
<6>[    1.216503] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
<7>[    1.216506] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
<6>[    1.216512] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>[    1.216521] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
<7>[    1.216557] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
<6>[    1.216565] pciehp 0000:00:1c.4:pcie04: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
<7>[    1.216607] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
<6>[    1.216614] pciehp 0000:00:1c.5:pcie04: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
<7>[    1.216650] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
<6>[    1.216655] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
<7>[    1.216668] intel_idle: MWAIT substates: 0x1120
<7>[    1.216669] intel_idle: v0.4 model 0x2C
<7>[    1.216670] intel_idle: lapic_timer_reliable_states 0xffffffff
<6>[    1.217042] GHES: HEST is not enabled!
<6>[    1.217095] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    1.217409] Linux agpgart interface v0.103
<6>[    1.218135] rtc_cmos 00:02: RTC can wake from S4
<6>[    1.218238] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
<6>[    1.218260] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
<6>[    1.218274] ledtrig-cpu: registered to indicate activity on CPUs
<6>[    1.218556] NET: Registered protocol family 10
<6>[    1.218739] NET: Registered protocol family 17
<5>[    1.219256] Loading compiled-in X.509 certificates
<6>[    1.219264] registered taskstats version 1
<6>[    1.219271] zswap: loading zswap
<6>[    1.219273] zswap: using zbud pool
<6>[    1.219276] zswap: using lzo compressor
<6>[    1.219959]   Magic number: 11:198:393
<6>[    1.219965] pci_express 0000:00:1c.4:pcie08: hash matches
<6>[    1.220458] rtc_cmos 00:02: setting system clock to 2015-12-19 18:22:14 UTC (1450549334)
<7>[    1.220508] PM: Hibernation image not present or could not be loaded.
<6>[    1.222350] Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
<6>[    1.222351] Write protecting the kernel read-only data: 8192k
<6>[    1.224397] Freeing unused kernel memory: 520K (ffff88000157e000 - ffff880001600000)
<6>[    1.225583] Freeing unused kernel memory: 280K (ffff8800017ba000 - ffff880001800000)
<5>[    1.232257] random: systemd-tmpfile urandom read with 1 bits of entropy available
<6>[    1.264723] i8042: PNP: PS/2 Controller [PNP0f13:MSE0] at 0x60,0x64 irq 12
<4>[    1.264725] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
<6>[    1.267403] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[    1.267422] serio: i8042 AUX port at 0x60,0x64 irq 12
<5>[    1.267652] SCSI subsystem initialized
<7>[    1.269077] libata version 3.00 loaded.
<6>[    1.270110] ACPI: bus type USB registered
<6>[    1.270129] usbcore: registered new interface driver usbfs
<6>[    1.270137] usbcore: registered new interface driver hub
<6>[    1.270178] usbcore: registered new device driver usb
<6>[    1.270783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.271033] mvsas 0000:01:00.0: mvsas: driver version 0.8.16
<6>[    1.271175] ehci-pci: EHCI PCI platform driver
<6>[    1.271320] mvsas 0000:01:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
<6>[    1.271324] uhci_hcd: USB Universal Host Controller Interface driver
<6>[    1.271435] ehci-pci 0000:00:1a.7: EHCI Host Controller
<6>[    1.271440] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
<6>[    1.271451] ehci-pci 0000:00:1a.7: debug port 1
<7>[    1.275357] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
<6>[    1.275366] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf0f04000
<6>[    1.282201] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
<6>[    1.282431] hub 1-0:1.0: USB hub found
<6>[    1.282439] hub 1-0:1.0: 4 ports detected
<6>[    1.282767] ehci-pci 0000:00:1d.7: EHCI Host Controller
<6>[    1.282772] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
<6>[    1.282782] ehci-pci 0000:00:1d.7: debug port 1
<7>[    1.286675] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
<6>[    1.286683] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf0f05000
<6>[    1.295575] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
<6>[    1.295784] hub 2-0:1.0: USB hub found
<6>[    1.295794] hub 2-0:1.0: 8 ports detected
<6>[    1.296188] uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>[    1.296194] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
<6>[    1.296200] uhci_hcd 0000:00:1a.0: detected 2 ports
<6>[    1.296217] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
<6>[    1.296364] hub 3-0:1.0: USB hub found
<6>[    1.296371] hub 3-0:1.0: 2 ports detected
<6>[    1.296645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>[    1.296652] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
<6>[    1.296657] uhci_hcd 0000:00:1a.1: detected 2 ports
<6>[    1.296679] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001820
<6>[    1.296897] hub 4-0:1.0: USB hub found
<6>[    1.296905] hub 4-0:1.0: 2 ports detected
<6>[    1.297191] uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>[    1.297196] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
<6>[    1.297201] uhci_hcd 0000:00:1d.0: detected 2 ports
<6>[    1.297218] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001840
<6>[    1.297399] hub 5-0:1.0: USB hub found
<6>[    1.297407] hub 5-0:1.0: 2 ports detected
<6>[    1.297672] uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>[    1.297676] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
<6>[    1.297682] uhci_hcd 0000:00:1d.1: detected 2 ports
<6>[    1.297698] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001860
<6>[    1.297909] hub 6-0:1.0: USB hub found
<6>[    1.297917] hub 6-0:1.0: 2 ports detected
<6>[    1.298179] uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>[    1.298184] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
<6>[    1.298189] uhci_hcd 0000:00:1d.2: detected 2 ports
<6>[    1.298205] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
<6>[    1.298392] hub 7-0:1.0: USB hub found
<6>[    1.298400] hub 7-0:1.0: 2 ports detected
<6>[    1.298665] uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>[    1.298670] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
<6>[    1.298675] uhci_hcd 0000:00:1d.3: detected 2 ports
<6>[    1.298697] uhci_hcd 0000:00:1d.3: irq 19, io base 0x000018a0
<6>[    1.298857] hub 8-0:1.0: USB hub found
<6>[    1.298863] hub 8-0:1.0: 2 ports detected
<7>[    1.298990] ahci 0000:00:1f.2: version 3.0
<6>[    1.299267] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x9 impl SATA mode
<6>[    1.299270] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs 
<6>[    1.300202] scsi host1: ahci
<6>[    1.300355] scsi host2: ahci
<6>[    1.300466] scsi host3: ahci
<6>[    1.300571] scsi host4: ahci
<6>[    1.300690] scsi host5: ahci
<6>[    1.300797] scsi host6: ahci
<6>[    1.300837] ata1: SATA max UDMA/133 abar m2048@0xf0f06000 port 0xf0f06100 irq 32
<6>[    1.300838] ata2: DUMMY
<6>[    1.300839] ata3: DUMMY
<6>[    1.300841] ata4: SATA max UDMA/133 abar m2048@0xf0f06000 port 0xf0f06280 irq 32
<6>[    1.300842] ata5: DUMMY
<6>[    1.300842] ata6: DUMMY
<5>[    1.325630] firewire_ohci 0000:0a:0a.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
<6>[    1.618849] ata4: SATA link down (SStatus 0 SControl 300)
<6>[    1.708823] usb 2-6: new high-speed USB device number 4 using ehci-pci
<6>[    1.728816] usb 5-2: new low-speed USB device number 2 using uhci_hcd
<6>[    1.782106] usb 7-1: new low-speed USB device number 2 using uhci_hcd
<6>[    1.788809] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    1.790792] ata1.00: ATAPI: TSSTcorp CDDVDW TS-H653J, LJ01, max UDMA/33
<6>[    1.793056] ata1.00: configured for UDMA/33
<5>[    1.794854] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653J  LJ01 PQ: 0 ANSI: 5
<6>[    1.820754] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
<6>[    1.820758] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[    1.821047] sr 1:0:0:0: Attached scsi CD-ROM sr0
<5>[    1.825669] firewire_core 0000:0a:0a.0: created device fw0: GUID 00061b020198a50e, S400
<6>[    1.834473] hub 2-6:1.0: USB hub found
<6>[    1.834903] hub 2-6:1.0: 4 ports detected
<7>[    1.862635] pci_bus 0000:07: Allocating resources
<7>[    1.862676] pcieport 0000:06:00.0: bridge window [io  0x1000-0x0fff] to [bus 07-09] add_size 1000
<7>[    1.862679] pcieport 0000:06:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-09] add_size 200000 add_align 100000
<7>[    1.862682] pcieport 0000:06:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.862684] pcieport 0000:06:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.862686] pcieport 0000:06:00.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.862688] pcieport 0000:06:00.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
<6>[    1.862692] pcieport 0000:06:00.0: BAR 15: assigned [mem 0xf1400000-0xf15fffff 64bit pref]
<6>[    1.862694] pcieport 0000:06:00.0: BAR 13: assigned [io  0x6000-0x6fff]
<6>[    2.005036] hidraw: raw HID events driver (C) Jiri Kosina
<3>[    2.005361] MCE 0x40cb8f: kernel slab page still referenced by 1 users
<3>[    2.005414] MCE 0x40cb8f: recovery action for kernel slab page: Failed
<6>[    2.122036] usb 8-1: new full-speed USB device number 2 using uhci_hcd
<6>[    2.133268] usbcore: registered new interface driver usbhid
<6>[    2.133270] usbhid: USB HID core driver
<6>[    2.136117] input: daskeyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/0003:04D9:2013.0001/input/input2
<6>[    2.188926] hid-generic 0003:04D9:2013.0001: input,hidraw0: USB HID v1.10 Keyboard [daskeyboard] on usb-0000:00:1d.2-1/input0
<6>[    2.189084] input: daskeyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.1/0003:04D9:2013.0002/input/input3
<6>[    2.208719] tsc: Refined TSC clocksource calibration: 2933.437 MHz
<6>[    2.208724] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a48a5e2a02, max_idle_ns: 440795253616 ns
<6>[    2.242329] hid-generic 0003:04D9:2013.0002: input,hidraw1: USB HID v1.10 Device [daskeyboard] on usb-0000:00:1d.2-1/input1
<6>[    2.312291] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-1/input2
<6>[    2.427221] input: Logitech MX Master as /devices/pci0000:00/0000:00:1d.3/usb8/8-1/8-1:1.2/0003:046D:C52B.0005/0003:046D:4041.0006/input/input4
<6>[    2.427334] logitech-hidpp-device 0003:046D:4041.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:00:1d.3-1:1
<6>[    3.208899] clocksource: Switched to clocksource tsc
<6>[    4.271658] floppy0: no floppy controllers found
<6>[    4.271669] work still pending
<6>[    6.531079] scsi host0: mvsas
<7>[    6.532058] sas: phy-0:2 added to port-0:0, phy_mask:0x4 ( 200000000000000)
<7>[    6.532105] sas: phy-0:3 added to port-0:1, phy_mask:0x8 ( 300000000000000)
<7>[    6.532120] sas: DOING DISCOVERY on port 0, pid:158
<7>[    6.532124] sas: DONE DISCOVERY on port 0, pid:158, result:0
<7>[    6.532132] sas: DOING DISCOVERY on port 1, pid:158
<7>[    6.532135] sas: DONE DISCOVERY on port 1, pid:158, result:0
<7>[    6.532215] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
<7>[    6.532265] sas: ata7: end_device-0:0: dev error handler
<6>[    6.685673] ata7.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
<6>[    6.685677] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
<6>[    6.687226] ata7.00: configured for UDMA/133
<7>[    6.687309] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
<5>[    6.697948] scsi 0:0:0:0: Direct-Access     ATA      ST31000524AS     JC4B PQ: 0 ANSI: 5
<7>[    6.698020] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
<7>[    6.698100] sas: ata7: end_device-0:0: dev error handler
<7>[    6.698115] sas: ata8: end_device-0:1: dev error handler
<4>[    6.851325] ata8.00: supports DRM functions and may not be fully accessible
<6>[    6.851330] ata8.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
<6>[    6.851334] ata8.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
<4>[    6.852191] ata8.00: supports DRM functions and may not be fully accessible
<6>[    6.852482] ata8.00: configured for UDMA/133
<7>[    6.852573] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
<5>[    6.864609] scsi 0:0:1:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
<5>[    6.868827] sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
<5>[    6.868887] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
<5>[    6.868889] sd 0:0:1:0: [sdb] Write Protect is off
<7>[    6.868891] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    6.868904] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    6.869129] sd 0:0:0:0: [sda] Write Protect is off
<7>[    6.869133] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    6.869233] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    6.869353]  sdb: sdb1 sdb2 sdb3 sdb4
<5>[    6.870094] sd 0:0:1:0: [sdb] Attached SCSI disk
<6>[    6.891417]  sda: sda1
<5>[    6.892557] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    7.394413] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
<6>[    7.462177] ip_tables: (C) 2000-2006 Netfilter Core Team
<30>[    7.466107] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
<30>[    7.466335] systemd[1]: Detected architecture x86-64.
<30>[    7.467893] systemd[1]: Set hostname to <quetzalcoatl>.
<30>[    7.533814] systemd[1]: Reached target Login Prompts.
<30>[    7.534301] systemd[1]: Created slice User and Session Slice.
<30>[    7.534540] systemd[1]: Listening on udev Control Socket.
<30>[    7.534769] systemd[1]: Listening on LVM2 metadata daemon socket.
<30>[    7.535058] systemd[1]: Created slice System Slice.
<30>[    7.535292] systemd[1]: Listening on Device-mapper event daemon FIFOs.
<30>[    7.535531] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
<30>[    7.535749] systemd[1]: Reached target Swap.
<30>[    7.535973] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
<30>[    7.536268] systemd[1]: Created slice system-getty.slice.
<30>[    7.536508] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
<30>[    7.536819] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
<30>[    7.537061] systemd[1]: Listening on Journal Socket (/dev/log).
<30>[    7.541169] systemd[1]: Listening on udev Kernel Socket.
<30>[    7.541405] systemd[1]: Reached target Encrypted Volumes.
<30>[    7.541636] systemd[1]: Listening on Journal Socket.
<30>[    7.542642] systemd[1]: Starting Load Kernel Modules...
<30>[    7.543171] systemd[1]: Mounting Huge Pages File System...
<30>[    7.543766] systemd[1]: Mounting Debug File System...
<30>[    7.546235] systemd[1]: Mounting Temporary Directory...
<30>[    7.546739] systemd[1]: Mounting POSIX Message Queue File System...
<30>[    7.546917] systemd[1]: Reached target Slices.
<30>[    7.547134] systemd[1]: Reached target Remote File Systems.
<30>[    7.547695] systemd[1]: Starting Journal Service...
<30>[    7.548262] systemd[1]: Starting Create list of required static device nodes for the current kernel...
<30>[    7.548818] systemd[1]: Starting Remount Root and Kernel File Systems...
<30>[    7.548992] systemd[1]: Reached target Paths.
<30>[    7.549262] systemd[1]: Listening on Network Service Netlink Socket.
<30>[    7.549851] systemd[1]: Starting Setup Virtual Console...
<30>[    7.551269] systemd[1]: Started Create list of required static device nodes for the current kernel.
<7>[    7.551280] vboxdrv: Found 12 processor cores
<30>[    7.553908] systemd[1]: Mounted POSIX Message Queue File System.
<30>[    7.554137] systemd[1]: Mounted Huge Pages File System.
<6>[    7.554524] EXT4-fs (sdb4): re-mounted. Opts: data=ordered
<30>[    7.554671] systemd[1]: Mounted Debug File System.
<30>[    7.554883] systemd[1]: Mounted Temporary Directory.
<30>[    7.555721] systemd[1]: Started Remount Root and Kernel File Systems.
<30>[    7.562241] systemd[1]: Starting Load/Save Random Seed...
<30>[    7.563355] systemd[1]: Starting udev Coldplug all Devices...
<30>[    7.563956] systemd[1]: Starting Create Static Device Nodes in /dev...
<30>[    7.568876] systemd[1]: Started Load/Save Random Seed.
<6>[    7.571029] vboxdrv: TSC mode is Invariant, tentative frequency 2933437255 Hz
<7>[    7.571030] vboxdrv: Successfully loaded version 5.0.10_OSE (interface 0x00240000)
<30>[    7.572167] systemd[1]: Started Load Kernel Modules.
<30>[    7.574333] systemd[1]: Starting Apply Kernel Variables...
<30>[    7.574862] systemd[1]: Mounting Configuration File System...
<30>[    7.576116] systemd[1]: Mounted Configuration File System.
<30>[    7.591240] systemd[1]: Started Apply Kernel Variables.
<30>[    7.605227] systemd[1]: Started Create Static Device Nodes in /dev.
<30>[    7.605862] systemd[1]: Starting udev Kernel Device Manager...
<30>[    7.606016] systemd[1]: Reached target Local File Systems (Pre).
<30>[    7.606238] systemd[1]: Reached target Local File Systems.
<30>[    7.606951] systemd[1]: Started udev Coldplug all Devices.
<30>[    7.615386] systemd[1]: Started Setup Virtual Console.
<30>[    7.652537] systemd[1]: Started udev Kernel Device Manager.
<6>[    7.672701] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input5
<6>[    7.672707] ACPI: Power Button [PWRB]
<6>[    7.672766] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
<6>[    7.672769] ACPI: Power Button [PWRF]
<6>[    7.680820] wmi: Mapper loaded
<6>[    7.681325] EDAC MC: Ver: 3.0.0
<6>[    7.681521] dca service started, version 1.12.1
<6>[    7.681729] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[    7.684220] ioatdma: Intel(R) QuickData Technology Driver 4.00
<6>[    7.684241] ioatdma 0000:00:16.0: enabling device (0000 -> 0002)
<4>[    7.684465] ioatdma 0000:00:16.0: can't derive routing for PCI INT A
<4>[    7.684467] ioatdma 0000:00:16.0: PCI INT A: no GSI
<6>[    7.684653] ioatdma 0000:00:16.1: enabling device (0000 -> 0002)
<4>[    7.684844] ioatdma 0000:00:16.1: can't derive routing for PCI INT B
<4>[    7.684846] ioatdma 0000:00:16.1: PCI INT B: no GSI
<6>[    7.685031] ioatdma 0000:00:16.2: enabling device (0000 -> 0002)
<4>[    7.685315] ioatdma 0000:00:16.2: can't derive routing for PCI INT C
<4>[    7.685318] ioatdma 0000:00:16.2: PCI INT C: no GSI
<6>[    7.685531] ioatdma 0000:00:16.3: enabling device (0000 -> 0002)
<4>[    7.685814] ioatdma 0000:00:16.3: can't derive routing for PCI INT D
<4>[    7.685817] ioatdma 0000:00:16.3: PCI INT D: no GSI
<6>[    7.686038] ioatdma 0000:00:16.4: enabling device (0000 -> 0002)
<4>[    7.686348] ioatdma 0000:00:16.4: can't derive routing for PCI INT A
<4>[    7.686351] ioatdma 0000:00:16.4: PCI INT A: no GSI
<6>[    7.686546] ioatdma 0000:00:16.5: enabling device (0000 -> 0002)
<4>[    7.686787] ioatdma 0000:00:16.5: can't derive routing for PCI INT B
<4>[    7.686789] ioatdma 0000:00:16.5: PCI INT B: no GSI
<6>[    7.686938] ioatdma 0000:00:16.6: enabling device (0000 -> 0002)
<4>[    7.687118] ioatdma 0000:00:16.6: can't derive routing for PCI INT C
<4>[    7.687120] ioatdma 0000:00:16.6: PCI INT C: no GSI
<6>[    7.687285] ioatdma 0000:00:16.7: enabling device (0000 -> 0002)
<4>[    7.687484] ioatdma 0000:00:16.7: can't derive routing for PCI INT D
<4>[    7.687486] ioatdma 0000:00:16.7: PCI INT D: no GSI
<4>[    7.710946] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB_.PCI0.LPC0.PMIO) (20150619/utaddress-254)
<6>[    7.710954] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[    7.710959] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB_.PCI0.LPC0.GPOX) (20150619/utaddress-254)
<6>[    7.710962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[    7.710963] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB_.PCI0.LPC0.GPOX) (20150619/utaddress-254)
<6>[    7.710966] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[    7.710967] lpc_ich: Resource conflict(s) found affecting gpio_ich
<6>[    7.711881] input: PC Speaker as /devices/platform/pcspkr/input/input7
<6>[    7.712149] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
<6>[    7.713912] pps_core: LinuxPPS API ver. 1 registered
<6>[    7.713914] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    7.722158] PTP clock support registered
<6>[    7.730367] [drm] Initialized drm 1.1.0 20060810
<6>[    7.748031] tg3.c:v3.137 (May 11, 2014)
<6>[    7.748675] iTCO_vendor_support: vendor-support=0
<6>[    7.749367] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
<6>[    7.749398] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x1060)
<6>[    7.749511] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<6>[    7.750030] SSE version of gcm_enc/dec engaged.
<6>[    7.760658] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
<6>[    7.760664] snd_hda_intel 0000:02:00.1: Force to non-snoop mode
<30>[    7.768288] systemd[1]: Started Journal Service.
<46>[    7.775393] systemd-journald[224]: Received request to flush runtime journal from PID 1
<4>[    7.785484] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
<6>[    7.785781] mousedev: PS/2 mouse device common for all mice
<6>[    7.787511] input: Griffin PowerMate as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input9
<6>[    7.787621] usbcore: registered new interface driver powermate
<6>[    7.790526] tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 70:f3:95:03:bf:e2
<6>[    7.790531] tg3 0000:05:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
<6>[    7.790533] tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
<6>[    7.790535] tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
<6>[    7.791179] [drm] radeon kernel modesetting enabled.
<6>[    7.792296] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input10
<6>[    7.792349] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input11
<6>[    7.792397] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input12
<6>[    7.792442] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input13
<6>[    7.792488] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input14
<6>[    7.792534] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input15
<6>[    7.800300] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
<6>[    7.800303] AMD IOMMUv2 functionality not available on this system
<4>[    7.806043] CRAT table not found
<6>[    7.806045] Finished initializing topology ret=0
<6>[    7.806085] kfd kfd: Initialized module
<6>[    7.806912] [drm] initializing kernel modesetting (HAWAII 0x1002:0x67B0 0x1462:0x3080).
<6>[    7.806926] [drm] register mmio base: 0xF0800000
<6>[    7.806932] [drm] register mmio size: 262144
<6>[    7.806936] [drm] doorbell mmio base: 0xF0000000
<6>[    7.806937] [drm] doorbell mmio size: 8388608
<6>[    7.807155] ATOM BIOS: 113
<6>[    7.807231] radeon 0000:02:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
<6>[    7.807233] radeon 0000:02:00.0: GTT: 2048M 0x0000000100000000 - 0x000000017FFFFFFF
<6>[    7.807235] [drm] Detected VRAM RAM=4096M, BAR=256M
<6>[    7.807236] [drm] RAM width 512bits DDR
<6>[    7.807304] [TTM] Zone  kernel: Available graphics memory: 8214318 kiB
<6>[    7.807305] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
<6>[    7.807306] [TTM] Initializing pool allocator
<6>[    7.807310] [TTM] Initializing DMA pool allocator
<6>[    7.807326] [drm] radeon: 4096M of VRAM memory ready
<6>[    7.807327] [drm] radeon: 2048M of GTT memory ready.
<6>[    7.807335] [drm] Loading hawaii Microcode
<6>[    7.817313] [drm] Internal thermal controller with fan control
<6>[    7.817350] [drm] probing gen 2 caps for device 8086:340a = 3b3d02/0
<6>[    7.831441] tg3 0000:09:00.0 eth1: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 70:f3:95:03:bf:e3
<6>[    7.831444] tg3 0000:09:00.0 eth1: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
<6>[    7.831446] tg3 0000:09:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
<6>[    7.831448] tg3 0000:09:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
<6>[    7.838104] tg3 0000:05:00.0 ens5: renamed from eth0
<6>[    7.840050] [drm] radeon: dpm initialized
<6>[    7.844800] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
<6>[    7.844810] [drm] GART: num cpu pages 524288, num gpu pages 524288
<6>[    7.846253] [drm] probing gen 2 caps for device 8086:340a = 3b3d02/0
<6>[    7.846258] [drm] PCIE gen 2 link speeds already enabled
<6>[    7.856007] [drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
<6>[    7.856144] radeon 0000:02:00.0: WB enabled
<6>[    7.856152] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000100000c00 and cpu addr 0xffff8800d900cc00
<6>[    7.856154] radeon 0000:02:00.0: fence driver on ring 1 use gpu addr 0x0000000100000c04 and cpu addr 0xffff8800d900cc04
<6>[    7.856156] radeon 0000:02:00.0: fence driver on ring 2 use gpu addr 0x0000000100000c08 and cpu addr 0xffff8800d900cc08
<6>[    7.856157] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000100000c0c and cpu addr 0xffff8800d900cc0c
<6>[    7.856159] radeon 0000:02:00.0: fence driver on ring 4 use gpu addr 0x0000000100000c10 and cpu addr 0xffff8800d900cc10
<6>[    7.860955] tg3 0000:09:00.0 enp9s0: renamed from eth1
<6>[    7.893415] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90004836c98
<6>[    7.893733] radeon 0000:02:00.0: fence driver on ring 6 use gpu addr 0x0000000100000c18 and cpu addr 0xffff8800d900cc18
<6>[    7.893736] radeon 0000:02:00.0: fence driver on ring 7 use gpu addr 0x0000000100000c1c and cpu addr 0xffff8800d900cc1c
<6>[    7.893738] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[    7.893739] [drm] Driver supports precise vblank timestamp query.
<6>[    7.893765] radeon 0000:02:00.0: radeon: using MSI.
<6>[    7.893797] [drm] radeon: irq initialized.
<6>[    7.897562] [drm] ring test on 0 succeeded in 3 usecs
<6>[    7.897648] [drm] ring test on 1 succeeded in 3 usecs
<6>[    7.897665] [drm] ring test on 2 succeeded in 3 usecs
<6>[    7.898004] [drm] ring test on 3 succeeded in 5 usecs
<6>[    7.898013] [drm] ring test on 4 succeeded in 5 usecs
<6>[    7.934230] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
<6>[    7.944048] [drm] ring test on 5 succeeded in 2 usecs
<6>[    7.964065] [drm] UVD initialized successfully.
<6>[    7.980886] IPv6: ADDRCONF(NETDEV_UP): ens5: link is not ready
<6>[    8.042077] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
<6>[    8.043685] IPv6: ADDRCONF(NETDEV_UP): ens5: link is not ready
<6>[    8.074131] [drm] ring test on 6 succeeded in 21 usecs
<6>[    8.074145] [drm] ring test on 7 succeeded in 4 usecs
<6>[    8.074146] [drm] VCE initialized successfully.
<6>[    8.082847] [drm] ib test on ring 0 succeeded in 0 usecs
<6>[    8.132080] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1988: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
<6>[    8.132084] snd_hda_codec_analog hdaudioC0D2:    speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
<6>[    8.132087] snd_hda_codec_analog hdaudioC0D2:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
<6>[    8.132089] snd_hda_codec_analog hdaudioC0D2:    mono: mono_out=0x0
<6>[    8.132091] snd_hda_codec_analog hdaudioC0D2:    dig-out=0x1b/0x0
<6>[    8.132093] snd_hda_codec_analog hdaudioC0D2:    inputs:
<6>[    8.132096] snd_hda_codec_analog hdaudioC0D2:      Front Mic=0x14
<6>[    8.132098] snd_hda_codec_analog hdaudioC0D2:      Rear Mic=0x17
<6>[    8.132101] snd_hda_codec_analog hdaudioC0D2:      Line=0x15
<6>[    8.132103] snd_hda_codec_analog hdaudioC0D2:    dig-in=0x1c
<6>[    8.148772] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
<6>[    8.149724] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
<6>[    8.149817] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
<6>[    8.149879] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
<6>[    8.149931] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
<6>[    8.149989] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
<6>[    8.150042] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
<6>[    8.150100] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
<6>[    8.150150] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
<3>[    8.180705] MCE 0x40af07: kernel slab page still referenced by 1 users
<3>[    8.180709] MCE 0x40af07: recovery action for kernel slab page: Failed
<3>[    8.190703] MCE: 0x40012f: non anonymous thp
<3>[    8.190707] MCE 0x40012f: recovery action for high-order kernel page: Ignored
<3>[    8.220707] MCE: 0xd7927: non anonymous thp
<3>[    8.220714] MCE 0xd7927: recovery action for high-order kernel page: Ignored
<3>[    8.264036] MCE 0x3ffe66: kernel slab page still referenced by 1 users
<3>[    8.264041] MCE 0x3ffe66: recovery action for kernel slab page: Failed
<5>[    8.278668] random: nonblocking pool is initialized
<6>[    8.580616] [drm] ib test on ring 1 succeeded in 0 usecs
<6>[    8.580692] [drm] ib test on ring 2 succeeded in 0 usecs
<6>[    8.580809] [drm] ib test on ring 3 succeeded in 0 usecs
<6>[    8.580874] [drm] ib test on ring 4 succeeded in 0 usecs
<6>[    9.100478] [drm] ib test on ring 5 succeeded
<6>[    9.121442] [drm] ib test on ring 6 succeeded
<6>[    9.122257] [drm] ib test on ring 7 succeeded
<6>[    9.123650] [drm] Radeon Display Connectors
<6>[    9.123652] [drm] Connector 0:
<6>[    9.123653] [drm]   DP-1
<6>[    9.123654] [drm]   HPD2
<6>[    9.123656] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
<6>[    9.123656] [drm]   Encoders:
<6>[    9.123657] [drm]     DFP1: INTERNAL_UNIPHY2
<6>[    9.123658] [drm] Connector 1:
<6>[    9.123659] [drm]   HDMI-A-1
<6>[    9.123660] [drm]   HPD3
<6>[    9.123661] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
<6>[    9.123662] [drm]   Encoders:
<6>[    9.123662] [drm]     DFP2: INTERNAL_UNIPHY2
<6>[    9.123663] [drm] Connector 2:
<6>[    9.123664] [drm]   DVI-D-1
<6>[    9.123664] [drm]   HPD1
<6>[    9.123666] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
<6>[    9.123666] [drm]   Encoders:
<6>[    9.123667] [drm]     DFP3: INTERNAL_UNIPHY1
<6>[    9.123668] [drm] Connector 3:
<6>[    9.123669] [drm]   DVI-D-2
<6>[    9.123669] [drm]   HPD6
<6>[    9.123671] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
<6>[    9.123671] [drm]   Encoders:
<6>[    9.123672] [drm]     DFP4: INTERNAL_UNIPHY
<6>[    9.212660] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
<6>[    9.248632] [drm] fb mappable at 0xE0727000
<6>[    9.248635] [drm] vram apper at 0xE0000000
<6>[    9.248636] [drm] size 8294400
<6>[    9.248637] [drm] fb depth is 24
<6>[    9.248637] [drm]    pitch is 7680
<6>[    9.248799] fbcon: radeondrmfb (fb0) is primary device
<6>[    9.248937] Console: switching to colour frame buffer device 210x65
<6>[    9.248944] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
<6>[    9.248945] radeon 0000:02:00.0: registered panic notifier
<6>[    9.269745] [drm] Initialized radeon 2.43.0 20080528 for 0000:02:00.0 on minor 0
<6>[    9.514290] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
<6>[    9.813658] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
<6>[   10.483447] fuse init (API version 7.23)
<6>[   10.693413] floppy0: no floppy controllers found
<6>[   11.544533] tg3 0000:05:00.0 ens5: Link is up at 1000 Mbps, full duplex
<6>[   11.544543] tg3 0000:05:00.0 ens5: Flow control is on for TX and on for RX
<6>[   11.544576] IPv6: ADDRCONF(NETDEV_CHANGE): ens5: link becomes ready
<3>[   14.352664] tpm_tis 00:00: tpm_transmit: tpm_send: error -62
<4>[   14.352685] tpm_tis: probe of 00:00 failed with error -62
<3>[   25.186886] MCE 0x3e41ce: recovery action for dirty LRU page: Recovered
<3>[   25.236791] MCE 0x40d64f: recovery action for high-order kernel page: Ignored
<3>[   25.236923] MCE 0x3e3b67: recovery action for dirty LRU page: Recovered
<3>[   25.236930] MCE: Killing pool:2435 due to hardware memory corruption fault at 7f329809cff2
<3>[   25.246809] MCE 0x3e37d7: recovery action for dirty LRU page: Recovered
<3>[   33.235062] MCE: Killing pool:2653 due to hardware memory corruption fault at 7fcb080778b3
<3>[   33.235064] MCE 0x3d925f: recovery action for dirty LRU page: Recovered
<3>[   42.173134] MCE 0x3cfbce: recovery action for dirty LRU page: Recovered
<3>[   42.173141] MCE: Killing Xorg:2230 due to hardware memory corruption fault at 30939e0
<3>[   59.199330] MCE: Killing gnome-contacts-:3228 due to hardware memory corruption fault at 18c71b7
<3>[   59.199332] MCE 0x3c8d1f: recovery action for dirty LRU page: Recovered
<3>[   59.239218] MCE 0x3c6fbf: recovery action for dirty LRU page: Recovered
<3>[   85.136207] MCE: 0x3fed07: non anonymous thp
<3>[   85.136216] MCE 0x3fed07: recovery action for high-order kernel page: Ignored
<3>[  126.161720] MCE: 0x3fd95e: non anonymous thp
<3>[  126.161726] MCE 0x3fd95e: recovery action for high-order kernel page: Ignored
<3>[  131.130859] MCE 0x3c294f: recovery action for dirty LRU page: Recovered
<3>[  131.130884] MCE: Killing firefox:3901 due to hardware memory corruption fault at 7f095be397b8
<3>[  131.160754] MCE 0x3c10a7: recovery action for dirty LRU page: Recovered
<3>[  156.125279] MCE: 0x3f46f7: non anonymous thp
<3>[  156.125284] MCE 0x3f46f7: recovery action for high-order kernel page: Ignored
<3>[  316.125952] MCE 0x3a6aff: recovery action for dirty LRU page: Recovered
<3>[  316.141969] MCE: Killing firefox:3968 due to hardware memory corruption fault at 7faedd650fd0
<3>[  316.165771] MCE 0x3b4bcf: kernel slab page still referenced by 1 users
<3>[  316.165775] MCE 0x3b4bcf: recovery action for kernel slab page: Failed
<3>[  316.195791] MCE 0x3a66ef: recovery action for dirty LRU page: Recovered
<3>[  317.095702] MCE 0xaf99f: recovery action for dirty LRU page: Recovered
<3>[  317.125737] MCE 0x379a6f: recovery action for dirty LRU page: Recovered
<3>[  317.145824] MCE 0x378a17: recovery action for dirty LRU page: Recovered
<3>[  317.175708] MCE 0x37ffe7: kernel slab page still referenced by 1 users
<3>[  317.175712] MCE 0x37ffe7: recovery action for kernel slab page: Failed
<3>[  317.185827] MCE 0x3763af: recovery action for dirty LRU page: Recovered
<6>[  317.375938] Chrome_ChildThr[4074]: segfault at 0 ip 00005653e5e7038a sp 00007f7c9c7fe480 error 6 in plugin-container[5653e5e68000+6b000]
<3>[  318.175666] MCE 0xacae7: kernel slab page still referenced by 1 users
<3>[  318.175671] MCE 0xacae7: recovery action for kernel slab page: Failed

Last edited by elninja (2015-12-19 18:53:40)

elninja · 2015-12-19 19:06:52

I just read the /proc/kmsg file, It seems like the memory corruption starts just after probing the Trusted Platform Module. I'm going to disable that in the BIOS and report back.

EDIT #1

So the system booted up just fine after disabling. I still need to reboot a few more times in order to know if that fixed it.

Last edited by elninja (2015-12-19 19:20:21)

mich41 · 2015-12-19 19:27:45

elninja wrote:

It seems like the memory corruption starts just after probing the Trusted Platform Module

I wouldn't be so sure...

<6>[    0.021515] mce: [Hardware Error]: Machine check events logged

elninja · 2015-12-19 19:38:24

Ah, you're right. I still have the errors, system is very unstable and it's at random times.
Tried doing a stress test using mprime, I says `Bus Error`

I'm installing and enabling mcelog to see what it can be.

[elninja@quetzalcoatl ~]$ mprime
	     Main Menu

	 1.  Test/Primenet
	 2.  Test/Worker threads
	 3.  Test/Status
	 4.  Test/Continue
	 5.  Test/Exit
	 6.  Advanced/Test
	 7.  Advanced/Time
	 8.  Advanced/P-1
	 9.  Advanced/ECM
	10.  Advanced/Manual Communication
	11.  Advanced/Unreserve Exponent
	12.  Advanced/Quit Gimps
	13.  Options/CPU
	14.  Options/Preferences
	15.  Options/Torture Test
	16.  Options/Benchmark
	17.  Help/About
	18.  Help/About PrimeNet Server
Your choice: 15

Number of torture test threads to run (12): 3
Choose a type of torture test to run.
  1 = Small FFTs (maximum heat and FPU stress, data fits in L2 cache, RAM
not tested much).
  2 = In-place large FFTs (maximum power consumption, some RAM tested).
  3 = Blend (tests some of everything, lots of RAM tested).
  11,12,13 = Allows you to fine tune the above three selections.
Blend is the default.  NOTE: if you fail the blend test, but can pass the
small FFT test then your problem is likely bad memory or a bad memory
controller.
Type of torture test to run (3): 

Accept the answers above? (Y): 
[Main thread Dec 19 11:33] Starting workers.
[Worker #1 Dec 19 11:33] Worker starting
[Worker #1 Dec 19 11:33] Setting affinity to run worker on any logical CPU.
[Worker #1 Dec 19 11:33] Beginning a continuous self-test on your computer.
[Worker #1 Dec 19 11:33] Please read stress.txt.  Hit ^C to end this test.
[Worker #2 Dec 19 11:33] Worker starting
[Worker #2 Dec 19 11:33] Setting affinity to run worker on any logical CPU.
[Worker #2 Dec 19 11:33] Beginning a continuous self-test on your computer.
[Worker #2 Dec 19 11:33] Please read stress.txt.  Hit ^C to end this test.
[Worker #3 Dec 19 11:33] Worker starting
[Worker #3 Dec 19 11:33] Setting affinity to run worker on any logical CPU.
[Worker #3 Dec 19 11:33] Beginning a continuous self-test on your computer.
[Worker #3 Dec 19 11:33] Please read stress.txt.  Hit ^C to end this test.
[Worker #1 Dec 19 11:33] Test 1, 6500 Lucas-Lehmer iterations of M12451841 using Pentium4 type-2 FFT length 640K, Pass1=640, Pass2=1K.
[Worker #2 Dec 19 11:33] Test 1, 6500 Lucas-Lehmer iterations of M12451841 using Pentium4 type-2 FFT length 640K, Pass1=640, Pass2=1K.
[Worker #3 Dec 19 11:33] Test 1, 6500 Lucas-Lehmer iterations of M12451841 using Pentium4 type-2 FFT length 640K, Pass1=640, Pass2=1K.
Bus error (core dumped)

[elninja@quetzalcoatl ~]$ lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                12
On-line CPU(s) list:   0-11
Thread(s) per core:    2
Core(s) per socket:    6
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 44
Model name:            Intel(R) Xeon(R) CPU           X5670  @ 2.93GHz
Stepping:              2
CPU MHz:               1596.000
CPU max MHz:           2927.0000
CPU min MHz:           1596.0000
BogoMIPS:              5869.54
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              12288K
NUMA node0 CPU(s):     0-11
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid

[elninja@quetzalcoatl ~]$ sudo cat /proc/kmsg
[sudo] password for elninja: 
<6>[    0.000000] Initializing cgroup subsys cpuset
<6>[    0.000000] Initializing cgroup subsys cpu
<6>[    0.000000] Initializing cgroup subsys cpuacct
<5>[    0.000000] Linux version 4.2.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015
<6>[    0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb4 rw initrd=../intel-ucode.img,../initramfs-linux.img
<6>[    0.000000] x86/fpu: Legacy x87 FPU detected.
<6>[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
<6>[    0.000000] e820: BIOS-provided physical RAM map:
<6>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000000d6000-0x00000000000d7fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf79ffff] usable
<6>[    0.000000] BIOS-e820: [mem 0x00000000bf7a0000-0x00000000bf7c6fff] ACPI data
<6>[    0.000000] BIOS-e820: [mem 0x00000000bf7c7000-0x00000000bf7c8fff] ACPI NVS
<6>[    0.000000] BIOS-e820: [mem 0x00000000bf7c9000-0x00000000bfffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] SMBIOS 2.6 present.
<7>[    0.000000] DMI: LENOVO 4158CM1/LENOVO, BIOS 61KT50AUS 01/14/2014
<7>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[    0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
<7>[    0.000000] MTRR default type: uncachable
<7>[    0.000000] MTRR fixed ranges enabled:
<7>[    0.000000]   00000-9FFFF write-back
<7>[    0.000000]   A0000-BFFFF uncachable
<7>[    0.000000]   C0000-CFFFF write-protect
<7>[    0.000000]   D0000-DFFFF uncachable
<7>[    0.000000]   E0000-FFFFF write-protect
<7>[    0.000000] MTRR variable ranges enabled:
<7>[    0.000000]   0 base 00C0000000 mask FFC0000000 uncachable
<7>[    0.000000]   1 base 0000000000 mask FC00000000 write-back
<7>[    0.000000]   2 base 0400000000 mask FFC0000000 write-back
<7>[    0.000000]   3 disabled
<7>[    0.000000]   4 disabled
<7>[    0.000000]   5 disabled
<7>[    0.000000]   6 disabled
<7>[    0.000000]   7 disabled
<7>[    0.000000]   8 disabled
<7>[    0.000000]   9 disabled
<6>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
<7>[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
<6>[    0.000000] e820: last_pfn = 0xbf7a0 max_arch_pfn = 0x400000000
<6>[    0.000000] found SMP MP-table at [mem 0x000f6a70-0x000f6a7f] mapped at [ffff8800000f6a70]
<6>[    0.000000] Scanning 1 areas for low memory corruption
<7>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
<6>[    0.000000] Using GB pages for direct mapping
<6>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
<7>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
<7>[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
<7>[    0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
<7>[    0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
<6>[    0.000000] init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
<7>[    0.000000]  [mem 0x43fe00000-0x43fffffff] page 1G
<6>[    0.000000] init_memory_mapping: [mem 0x420000000-0x43fdfffff]
<7>[    0.000000]  [mem 0x420000000-0x43fdfffff] page 1G
<6>[    0.000000] init_memory_mapping: [mem 0x00100000-0xbf79ffff]
<7>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
<7>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
<7>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
<7>[    0.000000]  [mem 0x80000000-0xbf5fffff] page 2M
<7>[    0.000000]  [mem 0xbf600000-0xbf79ffff] page 4k
<6>[    0.000000] init_memory_mapping: [mem 0x100000000-0x41fffffff]
<7>[    0.000000]  [mem 0x100000000-0x41fffffff] page 1G
<6>[    0.000000] RAMDISK: [mem 0x7fbd1000-0x7fffffff]
<6>[    0.000000] ACPI: Early table checksum verification disabled
<4>[    0.000000] ACPI: RSDP 0x00000000000F6A40 000024 (v02 PTLTD )
<4>[    0.000000] ACPI: XSDT 0x00000000BF7BC2DB 000084 (v01 LENOVO TC-61    060400D0  LTP 00000000)
<4>[    0.000000] ACPI: FACP 0x00000000BF7C681D 0000F4 (v03 LENOVO TC-61    060400D0 PTL  00000002)
<4>[    0.000000] ACPI: DSDT 0x00000000BF7BC35F 00A43A (v01 LENOVO TC-61    060400D0 MSFT 0100000E)
<4>[    0.000000] ACPI: FACS 0x00000000BF7C8FC0 000040
<4>[    0.000000] ACPI: FACS 0x00000000BF7C8FC0 000040
<4>[    0.000000] ACPI: SSDT 0x00000000BF7AC287 004E90 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
<4>[    0.000000] ACPI: SLIT 0x00000000BF7C6935 000030 (v01 Intel  TYLERBRG 060400D0 LOHR 0000005A)
<4>[    0.000000] ACPI: TCPA 0x00000000BF7C6965 000032 (v01 LENOVO TC-61    060400D0 PTL  00000000)
<4>[    0.000000] ACPI: SLIC 0x00000000BF7C6997 000176 (v01 LENOVO TC-61    060400D0  LTP 00000000)
<4>[    0.000000] ACPI: SRAT 0x00000000BF7C6B0D 000140 (v01 Intel  Tylerbrg 060400D0 PHX. 00000001)
<4>[    0.000000] ACPI: DMAR 0x00000000BF7C6C4D 0001C0 (v01 Intel  OEMDMAR  060400D0 LOHR 00000001)
<4>[    0.000000] ACPI: APIC 0x00000000BF7C6E0D 0000F4 (v01 PTLTD  ? APIC   060400D0  LTP 00000000)
<4>[    0.000000] ACPI: MCFG 0x00000000BF7C6F01 00003C (v01 PTLTD    MCFG   060400D0  LTP 00000000)
<4>[    0.000000] ACPI: HPET 0x00000000BF7C6F3D 000038 (v01 PTLTD  HPETTBL  060400D0  LTP 00000001)
<4>[    0.000000] ACPI: BOOT 0x00000000BF7C6F75 000028 (v01 PTLTD  $SBFTBL$ 060400D0  LTP 00000001)
<4>[    0.000000] ACPI: ASF! 0x00000000BF7C6F9D 000063 (v32 LENOVO TC-61    060400D0 PTL  00000001)
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0
<6>[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0xbfffffff]
<6>[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x43fffffff]
<7>[    0.000000] NUMA: Initialized distance table, cnt=1
<6>[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x43fffffff] -> [mem 0x00000000-0x43fffffff]
<6>[    0.000000] NODE_DATA(0) allocated [mem 0x43fff9000-0x43fffcfff]
<7>[    0.000000]  [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
<6>[    0.000000] Zone ranges:
<6>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
<6>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
<6>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043fffffff]
<6>[    0.000000] Movable zone start for each node
<6>[    0.000000] Early memory node ranges
<6>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000099fff]
<6>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf79ffff]
<6>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043fffffff]
<6>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
<7>[    0.000000] On node 0 totalpages: 4192057
<7>[    0.000000]   DMA zone: 64 pages used for memmap
<7>[    0.000000]   DMA zone: 21 pages reserved
<7>[    0.000000]   DMA zone: 3993 pages, LIFO batch:0
<7>[    0.000000]   DMA32 zone: 12191 pages used for memmap
<7>[    0.000000]   DMA32 zone: 780192 pages, LIFO batch:31
<7>[    0.000000]   Normal zone: 53248 pages used for memmap
<7>[    0.000000]   Normal zone: 3407872 pages, LIFO batch:31
<6>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
<6>[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[    0.000000] ACPI: IRQ0 used by override.
<7>[    0.000000] ACPI: IRQ9 used by override.
<6>[    0.000000] Using ACPI (MADT) for SMP configuration information
<6>[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
<6>[    0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
<6>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d5fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x000d6000-0x000d7fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x000d8000-0x000dffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xbf7a0000-0xbf7c6fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xbf7c7000-0xbf7c8fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xbf7c9000-0xbfffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
<6>[    0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
<6>[    0.000000] Booting paravirtualized kernel on bare hardware
<6>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
<6>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:12 nr_node_ids:1
<6>[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88043fc00000 s91480 r8192 d31400 u131072
<7>[    0.000000] pcpu-alloc: s91480 r8192 d31400 u131072 alloc=1*2097152
<7>[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- 
<6>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4126533
<6>[    0.000000] Policy zone: Normal
<5>[    0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sdb4 rw initrd=../intel-ucode.img,../initramfs-linux.img
<6>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<7>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
<7>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
<6>[    0.000000] Memory: 16422352K/16768228K available (5611K kernel code, 922K rwdata, 1768K rodata, 1180K init, 1152K bss, 345876K reserved, 0K cma-reserved)
<6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
<6>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=12.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=12
<6>[    0.000000] NR_IRQS:8448 nr_irqs:520 16
<6>[    0.000000] Console: colour VGA+ 80x25
<6>[    0.000000] console [tty0] enabled
<6>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
<7>[    0.000000] hpet clockevent registered
<6>[    0.000000] tsc: Fast TSC calibration using PIT
<6>[    0.000000] tsc: Detected 2933.543 MHz processor
<6>[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 5869.54 BogoMIPS (lpj=9778476)
<6>[    0.000029] pid_max: default: 32768 minimum: 301
<6>[    0.000033] ACPI: Core revision 20150619
<4>[    0.006257] ACPI: All ACPI Tables successfully acquired
<6>[    0.006277] Security Framework initialized
<6>[    0.006279] Yama: becoming mindful.
<6>[    0.007135] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
<6>[    0.010302] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
<6>[    0.011685] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>[    0.011700] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>[    0.011931] Initializing cgroup subsys blkio
<6>[    0.011934] Initializing cgroup subsys memory
<6>[    0.011940] Initializing cgroup subsys devices
<6>[    0.011942] Initializing cgroup subsys freezer
<6>[    0.011944] Initializing cgroup subsys net_cls
<6>[    0.011959] CPU: Physical Processor ID: 0
<6>[    0.011960] CPU: Processor Core ID: 0
<4>[    0.011965] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<4>[    0.011965] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
<6>[    0.011967] mce: CPU supports 9 MCE banks
<6>[    0.011976] CPU0: Thermal monitoring enabled (TM1)
<6>[    0.011982] process: using mwait in idle threads
<6>[    0.011987] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
<6>[    0.011988] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
<6>[    0.012222] Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
<6>[    0.022116] mce: [Hardware Error]: Machine check events logged
<6>[    0.022128] ftrace: allocating 22161 entries in 87 pages
<6>[    0.025741] mce: [Hardware Error]: Machine check events logged
<5>[    0.027178] CMCI storm detected: switching to poll mode
<6>[    0.031123] DMAR: Host address width 40
<6>[    0.031125] DMAR: DRHD base: 0x000000fe710000 flags: 0x1
<6>[    0.031134] DMAR: dmar0: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap f02077
<6>[    0.031135] DMAR: RMRR base: 0x000000bf7cd000 end: 0x000000bf7dbfff
<6>[    0.031136] DMAR: RMRR base: 0x000000bf7e4000 end: 0x000000bf7e4fff
<6>[    0.031137] DMAR: RMRR base: 0x000000bf7e5000 end: 0x000000bf7e5fff
<6>[    0.031138] DMAR: RMRR base: 0x000000bf7ea000 end: 0x000000bf7eafff
<6>[    0.031139] DMAR: RMRR base: 0x000000bf7e6000 end: 0x000000bf7e6fff
<6>[    0.031140] DMAR: RMRR base: 0x000000bf7e7000 end: 0x000000bf7e7fff
<6>[    0.031141] DMAR: RMRR base: 0x000000bf7e8000 end: 0x000000bf7e8fff
<6>[    0.031142] DMAR: RMRR base: 0x000000bf7e9000 end: 0x000000bf7e9fff
<6>[    0.031143] DMAR: RMRR base: 0x000000bf7eb000 end: 0x000000bf7ebfff
<6>[    0.031144] DMAR: ATSR flags: 0x0
<6>[    0.031147] Switched APIC routing to physical flat.
<6>[    0.031517] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[    0.168909] smpboot: CPU0: Intel(R) Xeon(R) CPU           X5670  @ 2.93GHz (fam: 06, model: 2c, stepping: 02)
<6>[    0.168928] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
<4>[    0.168943] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
<6>[    0.168944] ... version:                3
<6>[    0.168945] ... bit width:              48
<6>[    0.168946] ... generic registers:      4
<6>[    0.168947] ... value mask:             0000ffffffffffff
<6>[    0.168948] ... max period:             000000007fffffff
<6>[    0.168949] ... fixed-purpose events:   3
<6>[    0.168949] ... event mask:             000000070000000f
<6>[    0.182304] x86: Booting SMP configuration:
<6>[    0.182306] .... node  #0, CPUs:        #1
<6>[    0.185737] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
<4>[    0.188962]   #2
<4>[    0.190095] ------------[ cut here ]------------
<4>[    0.190101] WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:1376 __queue_work+0x28b/0x390()
<4>[    0.190101] Modules linked in:
<4>[    0.190104] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.2.5-1-ARCH #1
<4>[    0.190105] Hardware name: LENOVO 4158CM1/LENOVO, BIOS 61KT50AUS 01/14/2014
<4>[    0.190106]  0000000000000000 b4206019c527ae78 ffff88042d64fcb8 ffffffff81570d0a
<4>[    0.190107]  0000000000000000 0000000000000000 ffff88042d64fcf8 ffffffff810748a6
<4>[    0.190108]  0000000000000000 ffff88043fc59400 0000000000000080 ffff88042f088e00
<4>[    0.190110] Call Trace:
<4>[    0.190114]  [<ffffffff81570d0a>] dump_stack+0x4c/0x6e
<4>[    0.190117]  [<ffffffff810748a6>] warn_slowpath_common+0x86/0xc0
<4>[    0.190118]  [<ffffffff810749da>] warn_slowpath_null+0x1a/0x20
<4>[    0.190119]  [<ffffffff8108b42b>] __queue_work+0x28b/0x390
<4>[    0.190121]  [<ffffffff8108b55b>] queue_work_on+0x2b/0x50
<4>[    0.190123]  [<ffffffff8103f759>] mce_schedule_work.part.1+0x29/0x30
<4>[    0.190125]  [<ffffffff8104032f>] machine_check_poll+0x24f/0x270
<4>[    0.190126]  [<ffffffff81040392>] __mcheck_cpu_init_generic+0x42/0x120
<4>[    0.190128]  [<ffffffff81041759>] mcheck_cpu_init+0x169/0x4a0
<4>[    0.190130]  [<ffffffff81027cb4>] identify_cpu+0x334/0x3a0
<4>[    0.190131]  [<ffffffff81027d32>] identify_secondary_cpu+0x12/0x20
<4>[    0.190133]  [<ffffffff8104cb2f>] smp_store_cpu_info+0x3f/0x50
<4>[    0.190134]  [<ffffffff8104d0bb>] start_secondary+0x8b/0x1c0
<4>[    0.190139] ---[ end trace 18011cc7d513bfdb ]---
<4>[    0.192298]   #3  #4
<4>[    0.200087] ------------[ cut here ]------------
<4>[    0.200093] WARNING: CPU: 4 PID: 0 at kernel/workqueue.c:1376 __queue_work+0x28b/0x390()
<4>[    0.200094] Modules linked in:
<4>[    0.200096] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G        W       4.2.5-1-ARCH #1
<4>[    0.200097] Hardware name: LENOVO 4158CM1/LENOVO, BIOS 61KT50AUS 01/14/2014
<4>[    0.200098]  0000000000000000 b4206019c527ae78 ffff88042d657cb8 ffffffff81570d0a
<4>[    0.200100]  0000000000000000 0000000000000000 ffff88042d657cf8 ffffffff810748a6
<4>[    0.200101]  0000000000000000 ffff88043fc99400 0000000000000080 ffff88042f088e00
<4>[    0.200102] Call Trace:
<4>[    0.200107]  [<ffffffff81570d0a>] dump_stack+0x4c/0x6e
<4>[    0.200109]  [<ffffffff810748a6>] warn_slowpath_common+0x86/0xc0
<4>[    0.200110]  [<ffffffff810749da>] warn_slowpath_null+0x1a/0x20
<4>[    0.200111]  [<ffffffff8108b42b>] __queue_work+0x28b/0x390
<4>[    0.200113]  [<ffffffff8108b55b>] queue_work_on+0x2b/0x50
<4>[    0.200115]  [<ffffffff8103f759>] mce_schedule_work.part.1+0x29/0x30
<4>[    0.200117]  [<ffffffff8104032f>] machine_check_poll+0x24f/0x270
<4>[    0.200118]  [<ffffffff81040392>] __mcheck_cpu_init_generic+0x42/0x120
<4>[    0.200120]  [<ffffffff81041759>] mcheck_cpu_init+0x169/0x4a0
<4>[    0.200122]  [<ffffffff81027cb4>] identify_cpu+0x334/0x3a0
<4>[    0.200123]  [<ffffffff81027d32>] identify_secondary_cpu+0x12/0x20
<4>[    0.200125]  [<ffffffff8104cb2f>] smp_store_cpu_info+0x3f/0x50
<4>[    0.200126]  [<ffffffff8104d0bb>] start_secondary+0x8b/0x1c0
<4>[    0.200128] ---[ end trace 18011cc7d513bfdc ]---
<4>[    0.202281]   #5  #6  #7  #8  #9 #10 #11
<6>[    0.235526] x86: Booted up 1 node, 12 CPUs
<6>[    0.235531] smpboot: Total of 12 processors activated (70433.57 BogoMIPS)
<6>[    0.249013] devtmpfs: initialized
<6>[    0.252146] PM: Registering ACPI NVS region [mem 0xbf7c7000-0xbf7c8fff] (8192 bytes)
<6>[    0.252232] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
<6>[    0.252309] pinctrl core: initialized pinctrl subsystem
<6>[    0.252347] RTC time: 19:32:49, date: 12/19/15
<6>[    0.253701] NET: Registered protocol family 16
<6>[    1.068687] cpuidle: using governor ladder
<6>[    1.078685] cpuidle: using governor menu
<6>[    1.078715] Simple Boot Flag at 0x47 set to 0x1
<6>[    1.078773] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
<6>[    1.078774] ACPI: bus type PCI registered
<6>[    1.078776] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[    1.078835] PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xf8000000-0xf89fffff] (base 0xf8000000)
<6>[    1.078837] PCI: MMCONFIG at [mem 0xf8000000-0xf89fffff] reserved in E820
<4>[    1.078843] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
<6>[    1.078862] PCI: Using configuration type 1 for base access
<6>[    1.092324] ACPI: Added _OSI(Module Device)
<6>[    1.092326] ACPI: Added _OSI(Processor Device)
<6>[    1.092327] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    1.092328] ACPI: Added _OSI(Processor Aggregator Device)
<6>[    1.096193] ACPI: Interpreter enabled
<4>[    1.096197] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
<4>[    1.096201] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
<6>[    1.096211] ACPI: (supports S0 S3 S4 S5)
<6>[    1.096212] ACPI: Using IOAPIC for interrupt routing
<6>[    1.096232] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    1.101027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
<6>[    1.101032] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
<6>[    1.101210] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
<6>[    1.101211] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
<6>[    1.101523] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-09] only partially covers this bridge
<6>[    1.101673] PCI host bridge to bus 0000:00
<6>[    1.101676] pci_bus 0000:00: root bus resource [bus 00-ff]
<6>[    1.101678] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
<6>[    1.101679] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
<6>[    1.101681] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[    1.101682] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
<6>[    1.101684] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
<6>[    1.101685] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff window]
<7>[    1.101695] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
<7>[    1.101742] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
<7>[    1.101807] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
<7>[    1.101853] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
<6>[    1.101888] pci 0000:00:01.0: System wakeup disabled by ACPI
<7>[    1.101923] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
<7>[    1.101969] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
<6>[    1.102005] pci 0000:00:03.0: System wakeup disabled by ACPI
<7>[    1.102044] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
<7>[    1.102086] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[    1.102122] pci 0000:00:07.0: System wakeup disabled by ACPI
<7>[    1.102159] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
<7>[    1.102253] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
<7>[    1.102342] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
<7>[    1.102437] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
<7>[    1.102454] pci 0000:00:16.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.102536] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
<7>[    1.102552] pci 0000:00:16.1: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.102634] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
<7>[    1.102650] pci 0000:00:16.2: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.102732] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
<7>[    1.102749] pci 0000:00:16.3: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.102831] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
<7>[    1.102847] pci 0000:00:16.4: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.102928] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
<7>[    1.102944] pci 0000:00:16.5: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.103026] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
<7>[    1.103042] pci 0000:00:16.6: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.103124] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
<7>[    1.103140] pci 0000:00:16.7: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
<7>[    1.103224] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
<7>[    1.103266] pci 0000:00:1a.0: reg 0x20: [io  0x1800-0x181f]
<6>[    1.103333] pci 0000:00:1a.0: System wakeup disabled by ACPI
<7>[    1.103367] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
<7>[    1.103408] pci 0000:00:1a.1: reg 0x20: [io  0x1820-0x183f]
<6>[    1.103475] pci 0000:00:1a.1: System wakeup disabled by ACPI
<7>[    1.103516] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
<7>[    1.103542] pci 0000:00:1a.7: reg 0x10: [mem 0xf0f04000-0xf0f043ff]
<7>[    1.103603] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
<6>[    1.103640] pci 0000:00:1a.7: System wakeup disabled by ACPI
<7>[    1.103676] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
<7>[    1.103700] pci 0000:00:1b.0: reg 0x10: [mem 0xf0f00000-0xf0f03fff 64bit]
<7>[    1.103751] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<7>[    1.103815] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
<7>[    1.103868] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[    1.103904] pci 0000:00:1c.0: System wakeup disabled by ACPI
<7>[    1.103941] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
<7>[    1.103998] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[    1.104034] pci 0000:00:1c.4: System wakeup disabled by ACPI
<7>[    1.104068] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
<7>[    1.104126] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
<6>[    1.104162] pci 0000:00:1c.5: System wakeup disabled by ACPI
<7>[    1.104199] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
<7>[    1.104269] pci 0000:00:1d.0: reg 0x20: [io  0x1840-0x185f]
<6>[    1.104354] pci 0000:00:1d.0: System wakeup disabled by ACPI
<7>[    1.104388] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
<7>[    1.104430] pci 0000:00:1d.1: reg 0x20: [io  0x1860-0x187f]
<6>[    1.104496] pci 0000:00:1d.1: System wakeup disabled by ACPI
<7>[    1.104532] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
<7>[    1.104602] pci 0000:00:1d.2: reg 0x20: [io  0x1880-0x189f]
<6>[    1.104686] pci 0000:00:1d.2: System wakeup disabled by ACPI
<7>[    1.104723] pci 0000:00:1d.3: [8086:3a39] type 00 class 0x0c0300
<7>[    1.104792] pci 0000:00:1d.3: reg 0x20: [io  0x18a0-0x18bf]
<6>[    1.104876] pci 0000:00:1d.3: System wakeup disabled by ACPI
<7>[    1.104916] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
<7>[    1.104941] pci 0000:00:1d.7: reg 0x10: [mem 0xf0f05000-0xf0f053ff]
<7>[    1.105002] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<6>[    1.105038] pci 0000:00:1d.7: System wakeup disabled by ACPI
<7>[    1.105070] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
<6>[    1.105139] pci 0000:00:1e.0: System wakeup disabled by ACPI
<7>[    1.105173] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
<7>[    1.105318] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
<7>[    1.105343] pci 0000:00:1f.2: reg 0x10: [io  0x18f0-0x18f7]
<7>[    1.105350] pci 0000:00:1f.2: reg 0x14: [io  0x18e4-0x18e7]
<7>[    1.105357] pci 0000:00:1f.2: reg 0x18: [io  0x18e8-0x18ef]
<7>[    1.105364] pci 0000:00:1f.2: reg 0x1c: [io  0x18e0-0x18e3]
<7>[    1.105370] pci 0000:00:1f.2: reg 0x20: [io  0x18c0-0x18df]
<7>[    1.105377] pci 0000:00:1f.2: reg 0x24: [mem 0xf0f06000-0xf0f067ff]
<7>[    1.105401] pci 0000:00:1f.2: PME# supported from D3hot
<7>[    1.105466] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
<7>[    1.105480] pci 0000:00:1f.3: reg 0x10: [mem 0xf0f07000-0xf0f070ff 64bit]
<7>[    1.105498] pci 0000:00:1f.3: reg 0x20: [io  0x1100-0x111f]
<7>[    1.105613] pci 0000:01:00.0: [11ab:6485] type 00 class 0x010400
<7>[    1.105647] pci 0000:01:00.0: reg 0x18: [io  0x2000-0x207f]
<7>[    1.105664] pci 0000:01:00.0: reg 0x20: [mem 0xf0900000-0xf090ffff 64bit]
<7>[    1.105671] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
<7>[    1.105692] pci 0000:01:00.0: supports D1
<7>[    1.105693] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
<6>[    1.105712] pci 0000:01:00.0: System wakeup disabled by ACPI
<6>[    1.112023] pci 0000:00:01.0: PCI bridge to [bus 01]
<7>[    1.112026] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
<7>[    1.112028] pci 0000:00:01.0:   bridge window [mem 0xf0900000-0xf09fffff]
<7>[    1.112079] pci 0000:02:00.0: [1002:67b0] type 00 class 0x030000
<7>[    1.112107] pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
<7>[    1.112118] pci 0000:02:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
<7>[    1.112125] pci 0000:02:00.0: reg 0x20: [io  0x3000-0x30ff]
<7>[    1.112132] pci 0000:02:00.0: reg 0x24: [mem 0xf0800000-0xf083ffff]
<7>[    1.112140] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
<7>[    1.112173] pci 0000:02:00.0: supports D1 D2
<7>[    1.112174] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
<6>[    1.112201] pci 0000:02:00.0: System wakeup disabled by ACPI
<7>[    1.112238] pci 0000:02:00.1: [1002:aac8] type 00 class 0x040300
<7>[    1.112265] pci 0000:02:00.1: reg 0x10: [mem 0xf0840000-0xf0843fff 64bit]
<7>[    1.112318] pci 0000:02:00.1: supports D1 D2
<6>[    1.118685] pci 0000:00:03.0: PCI bridge to [bus 02]
<7>[    1.118690] pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
<7>[    1.118694] pci 0000:00:03.0:   bridge window [mem 0xf0800000-0xf08fffff]
<7>[    1.118700] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
<6>[    1.118761] pci 0000:00:07.0: PCI bridge to [bus 03]
<7>[    1.118764] pci 0000:00:07.0:   bridge window [io  0x0000-0x0fff]
<6>[    1.118809] pci 0000:00:1c.0: PCI bridge to [bus 04]
<7>[    1.118812] pci 0000:00:1c.0:   bridge window [io  0x0000-0x0fff]
<7>[    1.118875] pci 0000:05:00.0: [14e4:167b] type 00 class 0x020000
<7>[    1.118920] pci 0000:05:00.0: reg 0x10: [mem 0xf0a00000-0xf0a0ffff 64bit]
<7>[    1.119018] pci 0000:05:00.0: PME# supported from D3hot D3cold
<6>[    1.125351] pci 0000:00:1c.4: PCI bridge to [bus 05]
<7>[    1.125359] pci 0000:00:1c.4:   bridge window [mem 0xf0a00000-0xf0afffff]
<7>[    1.125439] pci 0000:06:00.0: [111d:8039] type 01 class 0x060400
<7>[    1.125527] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
<6>[    1.132016] pci 0000:00:1c.5: PCI bridge to [bus 06-09]
<7>[    1.132021] pci 0000:00:1c.5:   bridge window [mem 0xf0b00000-0xf0bfffff]
<7>[    1.132080] pci 0000:07:02.0: [111d:8039] type 01 class 0x060400
<7>[    1.132177] pci 0000:07:02.0: PME# supported from D0 D3hot D3cold
<7>[    1.132231] pci 0000:07:03.0: [111d:8039] type 01 class 0x060400
<7>[    1.132327] pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
<6>[    1.132402] pci 0000:06:00.0: PCI bridge to [bus 07-09]
<7>[    1.132413] pci 0000:06:00.0:   bridge window [mem 0xf0b00000-0xf0bfffff]
<6>[    1.132462] pci 0000:07:02.0: PCI bridge to [bus 08]
<7>[    1.132544] pci 0000:09:00.0: [14e4:167a] type 00 class 0x020000
<7>[    1.132603] pci 0000:09:00.0: reg 0x10: [mem 0xf0b00000-0xf0b0ffff 64bit]
<7>[    1.132734] pci 0000:09:00.0: PME# supported from D3hot D3cold
<6>[    1.138686] pci 0000:07:03.0: PCI bridge to [bus 09]
<7>[    1.138697] pci 0000:07:03.0:   bridge window [mem 0xf0b00000-0xf0bfffff]
<7>[    1.138769] pci 0000:0a:0a.0: [104c:8023] type 00 class 0x0c0010
<7>[    1.138791] pci 0000:0a:0a.0: reg 0x10: [mem 0xf0c04000-0xf0c047ff]
<7>[    1.138800] pci 0000:0a:0a.0: reg 0x14: [mem 0xf0c00000-0xf0c03fff]
<7>[    1.138855] pci 0000:0a:0a.0: supports D1 D2
<7>[    1.138856] pci 0000:0a:0a.0: PME# supported from D0 D1 D2 D3hot
<6>[    1.138911] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
<7>[    1.138915] pci 0000:00:1e.0:   bridge window [mem 0xf0c00000-0xf0cfffff]
<7>[    1.138920] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
<7>[    1.138922] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
<7>[    1.138923] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
<7>[    1.138925] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
<7>[    1.138926] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
<7>[    1.138928] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfdffffff window] (subtractive decode)
<6>[    1.139210] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
<6>[    1.139248] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
<6>[    1.139285] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
<6>[    1.139322] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
<6>[    1.139359] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
<6>[    1.139396] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 *5 6 7 10 11 14 15)
<6>[    1.139433] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
<6>[    1.139471] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
<4>[    1.139742] ACPI: Enabled 2 GPEs in block 00 to 3F
<6>[    1.139860] vgaarb: setting as boot device: PCI:0000:02:00.0
<6>[    1.139862] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
<6>[    1.139864] vgaarb: loaded
<6>[    1.139865] vgaarb: bridge control possible 0000:02:00.0
<6>[    1.139935] PCI: Using ACPI for IRQ routing
<7>[    1.139938] PCI: pci_cache_line_size set to 64 bytes
<7>[    1.140020] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff]
<7>[    1.140021] e820: reserve RAM buffer [mem 0xbf7a0000-0xbfffffff]
<6>[    1.140112] NetLabel: Initializing
<6>[    1.140113] NetLabel:  domain hash size = 128
<6>[    1.140114] NetLabel:  protocols = UNLABELED CIPSOv4
<6>[    1.140125] NetLabel:  unlabeled traffic allowed by default
<6>[    1.140146] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
<6>[    1.140150] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
<6>[    1.142179] clocksource: Switched to clocksource hpet
<6>[    1.146787] pnp: PnP ACPI init
<7>[    1.146846] pnp 00:00: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
<6>[    1.147027] system 00:01: [io  0x04d0-0x04d1] has been reserved
<6>[    1.147029] system 00:01: [io  0x0290-0x029f] has been reserved
<6>[    1.147031] system 00:01: [io  0x0800-0x080f] has been reserved
<6>[    1.147033] system 00:01: [io  0x1000-0x107f] could not be reserved
<6>[    1.147034] system 00:01: [io  0x1180-0x11bf] has been reserved
<6>[    1.147036] system 00:01: [io  0xfe00] has been reserved
<6>[    1.147038] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
<6>[    1.147040] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
<6>[    1.147042] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
<6>[    1.147043] system 00:01: [mem 0xfe800000-0xfe9fffff] has been reserved
<6>[    1.147045] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
<6>[    1.147047] system 00:01: [mem 0xfe710000-0xfe711fff] could not be reserved
<6>[    1.147049] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
<6>[    1.147050] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
<7>[    1.147053] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    1.147104] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[    1.147212] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
<6>[    1.147369] pnp: PnP ACPI: found 4 devices
<6>[    1.153639] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<7>[    1.153669] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
<7>[    1.153671] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
<7>[    1.153673] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
<7>[    1.153680] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
<7>[    1.153682] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
<7>[    1.153715] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 06-09] add_size 1000
<7>[    1.153717] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-09] add_size 200000 add_align 100000
<7>[    1.153732] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.153734] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.153736] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.153737] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.153739] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.153741] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.153743] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.153745] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.153747] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.153748] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.153750] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.153752] pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.153753] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.153755] pci 0000:00:1c.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
<6>[    1.153759] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
<6>[    1.153763] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
<6>[    1.153766] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
<6>[    1.153770] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
<6>[    1.153773] pci 0000:00:16.0: BAR 0: assigned [mem 0xc0800000-0xc0803fff 64bit]
<6>[    1.153780] pci 0000:00:16.1: BAR 0: assigned [mem 0xc0804000-0xc0807fff 64bit]
<6>[    1.153788] pci 0000:00:16.2: BAR 0: assigned [mem 0xc0808000-0xc080bfff 64bit]
<6>[    1.153795] pci 0000:00:16.3: BAR 0: assigned [mem 0xc080c000-0xc080ffff 64bit]
<6>[    1.153802] pci 0000:00:16.4: BAR 0: assigned [mem 0xc0810000-0xc0813fff 64bit]
<6>[    1.153809] pci 0000:00:16.5: BAR 0: assigned [mem 0xc0814000-0xc0817fff 64bit]
<6>[    1.153816] pci 0000:00:16.6: BAR 0: assigned [mem 0xc0818000-0xc081bfff 64bit]
<6>[    1.153824] pci 0000:00:16.7: BAR 0: assigned [mem 0xc081c000-0xc081ffff 64bit]
<6>[    1.153830] pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
<6>[    1.153832] pci 0000:00:1c.4: BAR 13: assigned [io  0x5000-0x5fff]
<6>[    1.153835] pci 0000:00:1c.5: BAR 13: assigned [io  0x6000-0x6fff]
<6>[    1.153838] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0940000-0xf097ffff pref]
<6>[    1.153840] pci 0000:00:01.0: PCI bridge to [bus 01]
<6>[    1.153842] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
<6>[    1.153846] pci 0000:00:01.0:   bridge window [mem 0xf0900000-0xf09fffff]
<6>[    1.153851] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0860000-0xf087ffff pref]
<6>[    1.153853] pci 0000:00:03.0: PCI bridge to [bus 02]
<6>[    1.153855] pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
<6>[    1.153858] pci 0000:00:03.0:   bridge window [mem 0xf0800000-0xf08fffff]
<6>[    1.153860] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
<6>[    1.153864] pci 0000:00:07.0: PCI bridge to [bus 03]
<6>[    1.153871] pci 0000:00:1c.0: PCI bridge to [bus 04]
<6>[    1.153873] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
<6>[    1.153877] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
<6>[    1.153880] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
<6>[    1.153884] pci 0000:00:1c.4: PCI bridge to [bus 05]
<6>[    1.153887] pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]
<6>[    1.153890] pci 0000:00:1c.4:   bridge window [mem 0xf0a00000-0xf0afffff]
<6>[    1.153893] pci 0000:00:1c.4:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
<6>[    1.153898] pci 0000:07:02.0: PCI bridge to [bus 08]
<6>[    1.153912] pci 0000:07:03.0: PCI bridge to [bus 09]
<6>[    1.153918] pci 0000:07:03.0:   bridge window [mem 0xf0b00000-0xf0bfffff]
<6>[    1.153927] pci 0000:06:00.0: PCI bridge to [bus 07-09]
<6>[    1.153933] pci 0000:06:00.0:   bridge window [mem 0xf0b00000-0xf0bfffff]
<6>[    1.153943] pci 0000:00:1c.5: PCI bridge to [bus 06-09]
<6>[    1.153945] pci 0000:00:1c.5:   bridge window [io  0x6000-0x6fff]
<6>[    1.153949] pci 0000:00:1c.5:   bridge window [mem 0xf0b00000-0xf0bfffff]
<6>[    1.153952] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
<6>[    1.153956] pci 0000:00:1e.0: PCI bridge to [bus 0a]
<6>[    1.153960] pci 0000:00:1e.0:   bridge window [mem 0xf0c00000-0xf0cfffff]
<7>[    1.153966] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
<7>[    1.153968] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
<7>[    1.153970] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<7>[    1.153971] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window]
<7>[    1.153973] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window]
<7>[    1.153974] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfdffffff window]
<7>[    1.153976] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
<7>[    1.153977] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
<7>[    1.153979] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
<7>[    1.153980] pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf08fffff]
<7>[    1.153982] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref]
<7>[    1.153983] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
<7>[    1.153985] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc01fffff]
<7>[    1.153986] pci_bus 0000:04: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
<7>[    1.153988] pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
<7>[    1.153989] pci_bus 0000:05: resource 1 [mem 0xf0a00000-0xf0afffff]
<7>[    1.153990] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
<7>[    1.153992] pci_bus 0000:06: resource 0 [io  0x6000-0x6fff]
<7>[    1.153993] pci_bus 0000:06: resource 1 [mem 0xf0b00000-0xf0bfffff]
<7>[    1.153995] pci_bus 0000:06: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
<7>[    1.153996] pci_bus 0000:07: resource 1 [mem 0xf0b00000-0xf0bfffff]
<7>[    1.153998] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0bfffff]
<7>[    1.153999] pci_bus 0000:0a: resource 1 [mem 0xf0c00000-0xf0cfffff]
<7>[    1.154001] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7 window]
<7>[    1.154002] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff window]
<7>[    1.154004] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff window]
<7>[    1.154005] pci_bus 0000:0a: resource 7 [mem 0x000d8000-0x000dbfff window]
<7>[    1.154007] pci_bus 0000:0a: resource 8 [mem 0x000dc000-0x000dffff window]
<7>[    1.154008] pci_bus 0000:0a: resource 9 [mem 0xc0000000-0xfdffffff window]
<6>[    1.154033] NET: Registered protocol family 2
<6>[    1.154212] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    1.154449] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>[    1.154608] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    1.154643] UDP hash table entries: 8192 (order: 6, 262144 bytes)
<6>[    1.154696] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
<6>[    1.154781] NET: Registered protocol family 1
<7>[    1.157782] pci 0000:02:00.0: Video device with shadowed ROM
<7>[    1.157798] PCI: CLS 64 bytes, default 64
<6>[    1.157839] Unpacking initramfs...
<6>[    1.215017] Freeing initrd memory: 4284K (ffff88007fbd1000 - ffff880080000000)
<6>[    1.215055] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[    1.215057] software IO TLB [mem 0xbb7a0000-0xbf7a0000] (64MB) mapped at [ffff8800bb7a0000-ffff8800bf79ffff]
<6>[    1.215172] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215178] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215184] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215190] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215196] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215202] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215208] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215213] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215218] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215224] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215229] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215234] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x1a
<6>[    1.215275] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
<6>[    1.215342] Scanning for low memory corruption every 60 seconds
<6>[    1.215650] futex hash table entries: 4096 (order: 6, 262144 bytes)
<5>[    1.215692] Initialise system trusted keyring
<6>[    1.215955] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<6>[    1.217217] zpool: loaded
<6>[    1.217219] zbud: loaded
<5>[    1.217366] VFS: Disk quotas dquot_6.6.0
<6>[    1.217400] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<5>[    1.217530] Key type big_key registered
<6>[    1.217634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
<6>[    1.217690] io scheduler noop registered
<6>[    1.217692] io scheduler deadline registered
<6>[    1.217720] io scheduler cfq registered (default)
<6>[    1.218553] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
<7>[    1.219656] aer 0000:00:01.0:pcie02: service driver aer loaded
<7>[    1.219678] aer 0000:00:03.0:pcie02: service driver aer loaded
<7>[    1.219698] aer 0000:00:07.0:pcie02: service driver aer loaded
<6>[    1.219711] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
<6>[    1.219713] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
<7>[    1.219715] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
<6>[    1.219723] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
<6>[    1.219724] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
<6>[    1.219726] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
<7>[    1.219728] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
<6>[    1.219735] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
<7>[    1.219737] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
<6>[    1.219753] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
<7>[    1.219757] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
<6>[    1.219773] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
<6>[    1.219775] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
<7>[    1.219778] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
<6>[    1.219794] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
<6>[    1.219795] pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
<6>[    1.219797] pcieport 0000:07:02.0: Signaling PME through PCIe PME interrupt
<6>[    1.219798] pcieport 0000:07:03.0: Signaling PME through PCIe PME interrupt
<6>[    1.219799] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
<7>[    1.219802] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
<6>[    1.219808] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>[    1.219817] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
<7>[    1.219855] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
<6>[    1.219863] pciehp 0000:00:1c.4:pcie04: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
<7>[    1.219901] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
<6>[    1.219908] pciehp 0000:00:1c.5:pcie04: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
<7>[    1.219945] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
<6>[    1.219950] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
<7>[    1.219963] intel_idle: MWAIT substates: 0x1120
<7>[    1.219964] intel_idle: v0.4 model 0x2C
<7>[    1.219965] intel_idle: lapic_timer_reliable_states 0xffffffff
<6>[    1.220338] GHES: HEST is not enabled!
<6>[    1.220390] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    1.220706] Linux agpgart interface v0.103
<6>[    1.221432] rtc_cmos 00:02: RTC can wake from S4
<6>[    1.221535] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
<6>[    1.221557] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
<6>[    1.221571] ledtrig-cpu: registered to indicate activity on CPUs
<6>[    1.221853] NET: Registered protocol family 10
<6>[    1.222035] NET: Registered protocol family 17
<5>[    1.222554] Loading compiled-in X.509 certificates
<6>[    1.222563] registered taskstats version 1
<6>[    1.222569] zswap: loading zswap
<6>[    1.222571] zswap: using zbud pool
<6>[    1.222574] zswap: using lzo compressor
<6>[    1.223254]   Magic number: 11:957:546
<6>[    1.223269] mem null: hash matches
<6>[    1.223750] rtc_cmos 00:02: setting system clock to 2015-12-19 19:32:50 UTC (1450553570)
<7>[    1.223800] PM: Hibernation image not present or could not be loaded.
<6>[    1.225662] Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
<6>[    1.225663] Write protecting the kernel read-only data: 8192k
<6>[    1.227717] Freeing unused kernel memory: 520K (ffff88000157e000 - ffff880001600000)
<6>[    1.228982] Freeing unused kernel memory: 280K (ffff8800017ba000 - ffff880001800000)
<5>[    1.235696] random: systemd-tmpfile urandom read with 1 bits of entropy available
<6>[    1.267412] i8042: PNP: PS/2 Controller [PNP0f13:MSE0] at 0x60,0x64 irq 12
<4>[    1.267414] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
<6>[    1.269981] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[    1.270027] serio: i8042 AUX port at 0x60,0x64 irq 12
<5>[    1.270577] SCSI subsystem initialized
<6>[    1.272665] ACPI: bus type USB registered
<6>[    1.272694] usbcore: registered new interface driver usbfs
<6>[    1.272708] usbcore: registered new interface driver hub
<6>[    1.272744] usbcore: registered new device driver usb
<7>[    1.272780] libata version 3.00 loaded.
<6>[    1.273430] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.273883] ehci-pci: EHCI PCI platform driver
<6>[    1.274211] uhci_hcd: USB Universal Host Controller Interface driver
<6>[    1.274242] ehci-pci 0000:00:1a.7: EHCI Host Controller
<6>[    1.274250] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
<6>[    1.274262] ehci-pci 0000:00:1a.7: debug port 1
<6>[    1.275305] mvsas 0000:01:00.0: mvsas: driver version 0.8.16
<6>[    1.275639] mvsas 0000:01:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
<7>[    1.278153] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
<6>[    1.278163] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf0f04000
<6>[    1.285536] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
<6>[    1.285730] hub 1-0:1.0: USB hub found
<6>[    1.285736] hub 1-0:1.0: 4 ports detected
<6>[    1.286080] ehci-pci 0000:00:1d.7: EHCI Host Controller
<6>[    1.286085] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
<6>[    1.286095] ehci-pci 0000:00:1d.7: debug port 1
<7>[    1.289991] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
<6>[    1.290002] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf0f05000
<6>[    1.302158] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
<6>[    1.302331] hub 2-0:1.0: USB hub found
<6>[    1.302337] hub 2-0:1.0: 8 ports detected
<6>[    1.302746] uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>[    1.302754] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
<6>[    1.302759] uhci_hcd 0000:00:1a.0: detected 2 ports
<6>[    1.302777] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
<6>[    1.303142] hub 3-0:1.0: USB hub found
<6>[    1.303151] hub 3-0:1.0: 2 ports detected
<6>[    1.303419] uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>[    1.303424] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
<6>[    1.303429] uhci_hcd 0000:00:1a.1: detected 2 ports
<6>[    1.303451] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001820
<6>[    1.303615] hub 4-0:1.0: USB hub found
<6>[    1.303623] hub 4-0:1.0: 2 ports detected
<6>[    1.303907] uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>[    1.303913] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
<6>[    1.303918] uhci_hcd 0000:00:1d.0: detected 2 ports
<6>[    1.303934] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001840
<6>[    1.304097] hub 5-0:1.0: USB hub found
<6>[    1.304105] hub 5-0:1.0: 2 ports detected
<6>[    1.304367] uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>[    1.304373] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
<6>[    1.304378] uhci_hcd 0000:00:1d.1: detected 2 ports
<6>[    1.304395] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001860
<6>[    1.304574] hub 6-0:1.0: USB hub found
<6>[    1.304582] hub 6-0:1.0: 2 ports detected
<6>[    1.304843] uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>[    1.304848] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
<6>[    1.304853] uhci_hcd 0000:00:1d.2: detected 2 ports
<6>[    1.304870] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
<6>[    1.305076] hub 7-0:1.0: USB hub found
<6>[    1.305084] hub 7-0:1.0: 2 ports detected
<6>[    1.305348] uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>[    1.305353] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
<6>[    1.305358] uhci_hcd 0000:00:1d.3: detected 2 ports
<6>[    1.305380] uhci_hcd 0000:00:1d.3: irq 19, io base 0x000018a0
<6>[    1.305509] hub 8-0:1.0: USB hub found
<6>[    1.305515] hub 8-0:1.0: 2 ports detected
<7>[    1.305656] ahci 0000:00:1f.2: version 3.0
<6>[    1.305961] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x9 impl SATA mode
<6>[    1.305964] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs 
<6>[    1.306783] scsi host1: ahci
<6>[    1.306945] scsi host2: ahci
<6>[    1.307076] scsi host3: ahci
<6>[    1.307226] scsi host4: ahci
<6>[    1.307350] scsi host5: ahci
<6>[    1.307475] scsi host6: ahci
<6>[    1.307514] ata1: SATA max UDMA/133 abar m2048@0xf0f06000 port 0xf0f06100 irq 32
<6>[    1.307516] ata2: DUMMY
<6>[    1.307516] ata3: DUMMY
<6>[    1.307518] ata4: SATA max UDMA/133 abar m2048@0xf0f06000 port 0xf0f06280 irq 32
<6>[    1.307519] ata5: DUMMY
<6>[    1.307520] ata6: DUMMY
<5>[    1.328921] firewire_ohci 0000:0a:0a.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
<6>[    1.625486] ata4: SATA link down (SStatus 0 SControl 300)
<6>[    1.715444] usb 2-6: new high-speed USB device number 4 using ehci-pci
<6>[    1.735443] usb 5-2: new low-speed USB device number 2 using uhci_hcd
<6>[    1.788760] usb 7-1: new low-speed USB device number 2 using uhci_hcd
<6>[    1.792113] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    1.794078] ata1.00: ATAPI: TSSTcorp CDDVDW TS-H653J, LJ01, max UDMA/33
<6>[    1.796505] ata1.00: configured for UDMA/33
<5>[    1.798272] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653J  LJ01 PQ: 0 ANSI: 5
<6>[    1.824192] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
<6>[    1.824197] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[    1.824511] sr 1:0:0:0: Attached scsi CD-ROM sr0
<5>[    1.828941] firewire_core 0000:0a:0a.0: created device fw0: GUID 00061b020198a50e, S400
<6>[    1.844491] hub 2-6:1.0: USB hub found
<6>[    1.844845] hub 2-6:1.0: 4 ports detected
<7>[    1.865927] pci_bus 0000:07: Allocating resources
<7>[    1.865969] pcieport 0000:06:00.0: bridge window [io  0x1000-0x0fff] to [bus 07-09] add_size 1000
<7>[    1.865972] pcieport 0000:06:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-09] add_size 200000 add_align 100000
<7>[    1.865975] pcieport 0000:06:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.865977] pcieport 0000:06:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    1.865979] pcieport 0000:06:00.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
<7>[    1.865981] pcieport 0000:06:00.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
<6>[    1.865985] pcieport 0000:06:00.0: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
<6>[    1.865987] pcieport 0000:06:00.0: BAR 13: assigned [io  0x6000-0x6fff]
<6>[    1.928525] hidraw: raw HID events driver (C) Jiri Kosina
<6>[    1.931148] usbcore: registered new interface driver usbhid
<6>[    1.931149] usbhid: USB HID core driver
<6>[    2.132039] usb 8-1: new full-speed USB device number 2 using uhci_hcd
<6>[    2.138969] input: daskeyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/0003:04D9:2013.0001/input/input2
<6>[    2.192226] hid-generic 0003:04D9:2013.0001: input,hidraw0: USB HID v1.10 Keyboard [daskeyboard] on usb-0000:00:1d.2-1/input0
<6>[    2.192383] input: daskeyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.1/0003:04D9:2013.0002/input/input3
<6>[    2.212030] tsc: Refined TSC clocksource calibration: 2933.437 MHz
<6>[    2.212035] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a48a5e2a02, max_idle_ns: 440795253616 ns
<6>[    2.245554] hid-generic 0003:04D9:2013.0002: input,hidraw1: USB HID v1.10 Device [daskeyboard] on usb-0000:00:1d.2-1/input1
<6>[    2.326315] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-1/input2
<6>[    2.442107] input: Logitech MX Master as /devices/pci0000:00/0000:00:1d.3/usb8/8-1/8-1:1.2/0003:046D:C52B.0005/0003:046D:4041.0006/input/input4
<6>[    2.442302] logitech-hidpp-device 0003:046D:4041.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:00:1d.3-1:1
<6>[    3.212066] clocksource: Switched to clocksource tsc
<6>[    4.278300] floppy0: no floppy controllers found
<6>[    4.278311] work still pending
<6>[    6.544390] scsi host0: mvsas
<7>[    6.545363] sas: phy-0:2 added to port-0:0, phy_mask:0x4 ( 200000000000000)
<7>[    6.545404] sas: phy-0:3 added to port-0:1, phy_mask:0x8 ( 300000000000000)
<7>[    6.545417] sas: DOING DISCOVERY on port 0, pid:161
<7>[    6.545422] sas: DONE DISCOVERY on port 0, pid:161, result:0
<7>[    6.545429] sas: DOING DISCOVERY on port 1, pid:161
<7>[    6.545433] sas: DONE DISCOVERY on port 1, pid:161, result:0
<7>[    6.545519] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
<7>[    6.545566] sas: ata7: end_device-0:0: dev error handler
<6>[    6.698984] ata7.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
<6>[    6.698989] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
<6>[    6.700543] ata7.00: configured for UDMA/133
<7>[    6.700625] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
<5>[    6.711548] scsi 0:0:0:0: Direct-Access     ATA      ST31000524AS     JC4B PQ: 0 ANSI: 5
<7>[    6.711939] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
<7>[    6.712013] sas: ata7: end_device-0:0: dev error handler
<7>[    6.712027] sas: ata8: end_device-0:1: dev error handler
<4>[    6.864635] ata8.00: supports DRM functions and may not be fully accessible
<6>[    6.864640] ata8.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
<6>[    6.864643] ata8.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
<4>[    6.865493] ata8.00: supports DRM functions and may not be fully accessible
<6>[    6.865784] ata8.00: configured for UDMA/133
<7>[    6.865875] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
<5>[    6.878098] scsi 0:0:1:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
<5>[    6.882894] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
<5>[    6.882932] sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
<5>[    6.882994] sd 0:0:0:0: [sda] Write Protect is off
<7>[    6.882997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    6.883092] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    6.883267] sd 0:0:1:0: [sdb] Write Protect is off
<7>[    6.883273] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    6.883371] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    6.884364]  sdb: sdb1 sdb2 sdb3 sdb4
<5>[    6.885413] sd 0:0:1:0: [sdb] Attached SCSI disk
<6>[    6.903473]  sda: sda1
<5>[    6.904560] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    7.653530] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
<6>[    7.716796] ip_tables: (C) 2000-2006 Netfilter Core Team
<30>[    7.721170] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
<30>[    7.721401] systemd[1]: Detected architecture x86-64.
<30>[    7.723045] systemd[1]: Set hostname to <quetzalcoatl>.
<30>[    7.789439] systemd[1]: Created slice User and Session Slice.
<30>[    7.789685] systemd[1]: Reached target Swap.
<30>[    7.789910] systemd[1]: Listening on udev Kernel Socket.
<30>[    7.790149] systemd[1]: Listening on Journal Socket.
<30>[    7.790414] systemd[1]: Listening on Network Service Netlink Socket.
<30>[    7.794682] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
<30>[    7.794926] systemd[1]: Listening on Journal Socket (/dev/log).
<30>[    7.795144] systemd[1]: Reached target Remote File Systems.
<30>[    7.795370] systemd[1]: Listening on Device-mapper event daemon FIFOs.
<30>[    7.795587] systemd[1]: Reached target Encrypted Volumes.
<30>[    7.795818] systemd[1]: Listening on udev Control Socket.
<30>[    7.796058] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
<30>[    7.796356] systemd[1]: Created slice System Slice.
<30>[    7.796924] systemd[1]: Mounting Huge Pages File System...
<30>[    7.797891] systemd[1]: Starting Load Kernel Modules...
<30>[    7.798489] systemd[1]: Mounting POSIX Message Queue File System...
<30>[    7.799119] systemd[1]: Starting Create list of required static device nodes for the current kernel...
<30>[    7.799314] systemd[1]: Reached target Slices.
<30>[    7.800587] systemd[1]: Mounting Temporary Directory...
<30>[    7.801265] systemd[1]: Mounting Debug File System...
<30>[    7.801874] systemd[1]: Starting Journal Service...
<30>[    7.802449] systemd[1]: Starting Setup Virtual Console...
<30>[    7.803043] systemd[1]: Starting Remount Root and Kernel File Systems...
<30>[    7.803212] systemd[1]: Reached target Login Prompts.
<30>[    7.803456] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
<30>[    7.803718] systemd[1]: Listening on LVM2 metadata daemon socket.
<30>[    7.804144] systemd[1]: Created slice system-getty.slice.
<30>[    7.806589] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
<30>[    7.806857] systemd[1]: Reached target Paths.
<7>[    7.807267] vboxdrv: Found 12 processor cores
<30>[    7.808163] systemd[1]: Mounted POSIX Message Queue File System.
<6>[    7.808605] EXT4-fs (sdb4): re-mounted. Opts: data=ordered
<30>[    7.808661] systemd[1]: Mounted Debug File System.
<30>[    7.808874] systemd[1]: Mounted Huge Pages File System.
<30>[    7.809082] systemd[1]: Mounted Temporary Directory.
<30>[    7.809822] systemd[1]: Started Create list of required static device nodes for the current kernel.
<30>[    7.810287] systemd[1]: Started Remount Root and Kernel File Systems.
<30>[    7.816959] systemd[1]: Starting Load/Save Random Seed...
<30>[    7.818243] systemd[1]: Starting udev Coldplug all Devices...
<30>[    7.818872] systemd[1]: Starting Create Static Device Nodes in /dev...
<30>[    7.820928] systemd[1]: Started Load/Save Random Seed.
<6>[    7.824572] vboxdrv: TSC mode is Invariant, tentative frequency 2933436782 Hz
<7>[    7.824574] vboxdrv: Successfully loaded version 5.0.10_OSE (interface 0x00240000)
<30>[    7.825648] systemd[1]: Started Load Kernel Modules.
<30>[    7.826252] systemd[1]: Starting Apply Kernel Variables...
<30>[    7.826790] systemd[1]: Mounting Configuration File System...
<30>[    7.828799] systemd[1]: Mounted Configuration File System.
<44>[    7.828999] systemd-journald[230]: File /var/log/journal/1f53dde0d1ed4dddad8c735ea631b01b/system.journal corrupted or uncleanly shut down, renaming and replacing.
<30>[    7.840895] systemd[1]: Started Apply Kernel Variables.
<30>[    7.845328] systemd[1]: Started Create Static Device Nodes in /dev.
<30>[    7.845579] systemd[1]: Reached target Local File Systems (Pre).
<30>[    7.845794] systemd[1]: Reached target Local File Systems.
<30>[    7.846429] systemd[1]: Starting udev Kernel Device Manager...
<30>[    7.852956] systemd[1]: Started Setup Virtual Console.
<30>[    7.858985] systemd[1]: Started udev Coldplug all Devices.
<30>[    7.873258] systemd[1]: Started udev Kernel Device Manager.
<30>[    7.876450] systemd[1]: Started Journal Service.
<46>[    7.883002] systemd-journald[230]: Received request to flush runtime journal from PID 1
<6>[    7.909411] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input5
<6>[    7.909415] ACPI: Power Button [PWRB]
<6>[    7.909456] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
<6>[    7.909458] ACPI: Power Button [PWRF]
<6>[    7.912956] wmi: Mapper loaded
<6>[    7.918556] dca service started, version 1.12.1
<6>[    7.920339] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[    7.920358] EDAC MC: Ver: 3.0.0
<6>[    7.947421] ioatdma: Intel(R) QuickData Technology Driver 4.00
<6>[    7.947452] ioatdma 0000:00:16.0: enabling device (0000 -> 0002)
<4>[    7.947699] ioatdma 0000:00:16.0: can't derive routing for PCI INT A
<4>[    7.947702] ioatdma 0000:00:16.0: PCI INT A: no GSI
<6>[    7.947933] ioatdma 0000:00:16.1: enabling device (0000 -> 0002)
<4>[    7.948221] ioatdma 0000:00:16.1: can't derive routing for PCI INT B
<4>[    7.948223] ioatdma 0000:00:16.1: PCI INT B: no GSI
<6>[    7.948398] ioatdma 0000:00:16.2: enabling device (0000 -> 0002)
<4>[    7.948600] ioatdma 0000:00:16.2: can't derive routing for PCI INT C
<4>[    7.948602] ioatdma 0000:00:16.2: PCI INT C: no GSI
<6>[    7.948751] ioatdma 0000:00:16.3: enabling device (0000 -> 0002)
<4>[    7.948932] ioatdma 0000:00:16.3: can't derive routing for PCI INT D
<4>[    7.948934] ioatdma 0000:00:16.3: PCI INT D: no GSI
<6>[    7.949079] ioatdma 0000:00:16.4: enabling device (0000 -> 0002)
<4>[    7.949293] ioatdma 0000:00:16.4: can't derive routing for PCI INT A
<4>[    7.949295] ioatdma 0000:00:16.4: PCI INT A: no GSI
<6>[    7.949440] ioatdma 0000:00:16.5: enabling device (0000 -> 0002)
<4>[    7.949732] ioatdma 0000:00:16.5: can't derive routing for PCI INT B
<4>[    7.949735] ioatdma 0000:00:16.5: PCI INT B: no GSI
<6>[    7.949926] ioatdma 0000:00:16.6: enabling device (0000 -> 0002)
<4>[    7.950226] ioatdma 0000:00:16.6: can't derive routing for PCI INT C
<4>[    7.950229] ioatdma 0000:00:16.6: PCI INT C: no GSI
<6>[    7.950456] ioatdma 0000:00:16.7: enabling device (0000 -> 0002)
<4>[    7.950762] ioatdma 0000:00:16.7: can't derive routing for PCI INT D
<4>[    7.950764] ioatdma 0000:00:16.7: PCI INT D: no GSI
<4>[    7.951471] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB_.PCI0.LPC0.PMIO) (20150619/utaddress-254)
<6>[    7.951477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[    7.951480] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB_.PCI0.LPC0.GPOX) (20150619/utaddress-254)
<6>[    7.951487] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[    7.951488] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB_.PCI0.LPC0.GPOX) (20150619/utaddress-254)
<6>[    7.951497] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[    7.951499] lpc_ich: Resource conflict(s) found affecting gpio_ich
<6>[    7.951563] pps_core: LinuxPPS API ver. 1 registered
<6>[    7.951564] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    7.959149] PTP clock support registered
<6>[    7.961169] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
<6>[    7.965789] [drm] Initialized drm 1.1.0 20060810
<6>[    7.973950] input: PC Speaker as /devices/platform/pcspkr/input/input7
<6>[    7.980112] tg3.c:v3.137 (May 11, 2014)
<6>[    7.995193] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
<6>[    7.995198] snd_hda_intel 0000:02:00.1: Force to non-snoop mode
<6>[    7.995859] SSE version of gcm_enc/dec engaged.
<6>[    8.005789] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9
<6>[    8.005874] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input10
<6>[    8.005968] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input11
<6>[    8.006068] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input12
<6>[    8.006124] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input13
<6>[    8.006207] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input14
<6>[    8.009873] mousedev: PS/2 mouse device common for all mice
<6>[    8.010982] iTCO_vendor_support: vendor-support=0
<6>[    8.011136] input: Griffin PowerMate as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input15
<6>[    8.011223] usbcore: registered new interface driver powermate
<6>[    8.012094] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
<6>[    8.012129] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x1060)
<6>[    8.012228] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<4>[    8.021074] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
<6>[    8.024234] [drm] radeon kernel modesetting enabled.
<6>[    8.024631] tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 70:f3:95:03:bf:e2
<6>[    8.024635] tg3 0000:05:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
<6>[    8.024637] tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
<6>[    8.024639] tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
<6>[    8.045219] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
<6>[    8.045222] AMD IOMMUv2 functionality not available on this system
<4>[    8.052312] CRAT table not found
<6>[    8.052314] Finished initializing topology ret=0
<6>[    8.052364] kfd kfd: Initialized module
<6>[    8.052799] [drm] initializing kernel modesetting (HAWAII 0x1002:0x67B0 0x1462:0x3080).
<6>[    8.052812] [drm] register mmio base: 0xF0800000
<6>[    8.052814] [drm] register mmio size: 262144
<6>[    8.052817] [drm] doorbell mmio base: 0xF0000000
<6>[    8.052818] [drm] doorbell mmio size: 8388608
<6>[    8.053031] ATOM BIOS: 113
<6>[    8.053107] radeon 0000:02:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
<6>[    8.053109] radeon 0000:02:00.0: GTT: 2048M 0x0000000100000000 - 0x000000017FFFFFFF
<6>[    8.053111] [drm] Detected VRAM RAM=4096M, BAR=256M
<6>[    8.053112] [drm] RAM width 512bits DDR
<6>[    8.053219] [TTM] Zone  kernel: Available graphics memory: 8214318 kiB
<6>[    8.053221] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
<6>[    8.053222] [TTM] Initializing pool allocator
<6>[    8.053228] [TTM] Initializing DMA pool allocator
<6>[    8.053248] [drm] radeon: 4096M of VRAM memory ready
<6>[    8.053250] [drm] radeon: 2048M of GTT memory ready.
<6>[    8.053266] [drm] Loading hawaii Microcode
<6>[    8.057992] tg3 0000:09:00.0 eth1: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 70:f3:95:03:bf:e3
<6>[    8.057996] tg3 0000:09:00.0 eth1: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
<6>[    8.057998] tg3 0000:09:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
<6>[    8.057999] tg3 0000:09:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
<6>[    8.063546] tg3 0000:05:00.0 ens5: renamed from eth0
<6>[    8.064838] [drm] Internal thermal controller with fan control
<6>[    8.064875] [drm] probing gen 2 caps for device 8086:340a = 3b3d02/0
<6>[    8.074095] tg3 0000:09:00.0 enp9s0: renamed from eth1
<6>[    8.087876] [drm] radeon: dpm initialized
<6>[    8.092886] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
<6>[    8.092896] [drm] GART: num cpu pages 524288, num gpu pages 524288
<6>[    8.094395] [drm] probing gen 2 caps for device 8086:340a = 3b3d02/0
<6>[    8.094399] [drm] PCIE gen 2 link speeds already enabled
<6>[    8.105698] [drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
<6>[    8.105842] radeon 0000:02:00.0: WB enabled
<6>[    8.105850] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000100000c00 and cpu addr 0xffff8800bb353c00
<6>[    8.105852] radeon 0000:02:00.0: fence driver on ring 1 use gpu addr 0x0000000100000c04 and cpu addr 0xffff8800bb353c04
<6>[    8.105854] radeon 0000:02:00.0: fence driver on ring 2 use gpu addr 0x0000000100000c08 and cpu addr 0xffff8800bb353c08
<6>[    8.105855] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000100000c0c and cpu addr 0xffff8800bb353c0c
<6>[    8.105857] radeon 0000:02:00.0: fence driver on ring 4 use gpu addr 0x0000000100000c10 and cpu addr 0xffff8800bb353c10
<6>[    8.128375] IPv6: ADDRCONF(NETDEV_UP): ens5: link is not ready
<6>[    8.143555] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90004436c98
<6>[    8.143777] radeon 0000:02:00.0: fence driver on ring 6 use gpu addr 0x0000000100000c18 and cpu addr 0xffff8800bb353c18
<6>[    8.143779] radeon 0000:02:00.0: fence driver on ring 7 use gpu addr 0x0000000100000c1c and cpu addr 0xffff8800bb353c1c
<6>[    8.143781] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[    8.143782] [drm] Driver supports precise vblank timestamp query.
<6>[    8.143802] radeon 0000:02:00.0: radeon: using MSI.
<6>[    8.143832] [drm] radeon: irq initialized.
<6>[    8.147506] [drm] ring test on 0 succeeded in 3 usecs
<6>[    8.147593] [drm] ring test on 1 succeeded in 3 usecs
<6>[    8.147610] [drm] ring test on 2 succeeded in 3 usecs
<6>[    8.147953] [drm] ring test on 3 succeeded in 5 usecs
<6>[    8.147962] [drm] ring test on 4 succeeded in 5 usecs
<6>[    8.162264] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
<5>[    8.163482] random: nonblocking pool is initialized
<6>[    8.193998] [drm] ring test on 5 succeeded in 2 usecs
<6>[    8.214015] [drm] UVD initialized successfully.
<6>[    8.217883] IPv6: ADDRCONF(NETDEV_UP): ens5: link is not ready
<6>[    8.219792] IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
<3>[    8.237321] MCE 0x42d64f: recovery action for high-order kernel page: Ignored
<3>[    8.237377] MCE 0x421837: kernel slab page still referenced by 1 users
<3>[    8.237426] MCE 0x421837: recovery action for kernel slab page: Failed
<3>[    8.250597] MCE 0x42cb7e: kernel slab page still referenced by 1 users
<3>[    8.250650] MCE 0x42cb7e: recovery action for kernel slab page: Failed
<6>[    8.338090] [drm] ring test on 6 succeeded in 21 usecs
<6>[    8.338102] [drm] ring test on 7 succeeded in 3 usecs
<6>[    8.338103] [drm] VCE initialized successfully.
<6>[    8.369203] [drm] ib test on ring 0 succeeded in 0 usecs
<6>[    8.372771] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1988: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
<6>[    8.372774] snd_hda_codec_analog hdaudioC0D2:    speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
<6>[    8.372776] snd_hda_codec_analog hdaudioC0D2:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
<6>[    8.372777] snd_hda_codec_analog hdaudioC0D2:    mono: mono_out=0x0
<6>[    8.372779] snd_hda_codec_analog hdaudioC0D2:    dig-out=0x1b/0x0
<6>[    8.372780] snd_hda_codec_analog hdaudioC0D2:    inputs:
<6>[    8.372782] snd_hda_codec_analog hdaudioC0D2:      Front Mic=0x14
<6>[    8.372784] snd_hda_codec_analog hdaudioC0D2:      Rear Mic=0x17
<6>[    8.372785] snd_hda_codec_analog hdaudioC0D2:      Line=0x15
<6>[    8.372787] snd_hda_codec_analog hdaudioC0D2:    dig-in=0x1c
<6>[    8.389935] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
<6>[    8.391113] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
<6>[    8.391179] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
<6>[    8.391241] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
<6>[    8.391317] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
<6>[    8.391372] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
<6>[    8.391432] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
<6>[    8.391503] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
<6>[    8.391557] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
<6>[    8.867247] [drm] ib test on ring 1 succeeded in 0 usecs
<6>[    8.867333] [drm] ib test on ring 2 succeeded in 0 usecs
<6>[    8.867451] [drm] ib test on ring 3 succeeded in 0 usecs
<6>[    8.867517] [drm] ib test on ring 4 succeeded in 0 usecs
<6>[    9.387156] [drm] ib test on ring 5 succeeded
<6>[    9.408195] [drm] ib test on ring 6 succeeded
<6>[    9.409047] [drm] ib test on ring 7 succeeded
<6>[    9.410399] [drm] Radeon Display Connectors
<6>[    9.410402] [drm] Connector 0:
<6>[    9.410404] [drm]   DP-1
<6>[    9.410405] [drm]   HPD2
<6>[    9.410408] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
<6>[    9.410409] [drm]   Encoders:
<6>[    9.410411] [drm]     DFP1: INTERNAL_UNIPHY2
<6>[    9.410412] [drm] Connector 1:
<6>[    9.410417] [drm]   HDMI-A-1
<6>[    9.410418] [drm]   HPD3
<6>[    9.410420] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
<6>[    9.410421] [drm]   Encoders:
<6>[    9.410423] [drm]     DFP2: INTERNAL_UNIPHY2
<6>[    9.410424] [drm] Connector 2:
<6>[    9.410425] [drm]   DVI-D-1
<6>[    9.410426] [drm]   HPD1
<6>[    9.410428] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
<6>[    9.410430] [drm]   Encoders:
<6>[    9.410433] [drm]     DFP3: INTERNAL_UNIPHY1
<6>[    9.410434] [drm] Connector 3:
<6>[    9.410435] [drm]   DVI-D-2
<6>[    9.410436] [drm]   HPD6
<6>[    9.410438] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
<6>[    9.410440] [drm]   Encoders:
<6>[    9.410441] [drm]     DFP4: INTERNAL_UNIPHY
<6>[    9.484559] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
<6>[    9.520203] [drm] fb mappable at 0xE0727000
<6>[    9.520205] [drm] vram apper at 0xE0000000
<6>[    9.520206] [drm] size 8294400
<6>[    9.520207] [drm] fb depth is 24
<6>[    9.520208] [drm]    pitch is 7680
<6>[    9.520310] fbcon: radeondrmfb (fb0) is primary device
<6>[    9.520405] Console: switching to colour frame buffer device 210x65
<6>[    9.520411] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
<6>[    9.520413] radeon 0000:02:00.0: registered panic notifier
<6>[    9.536565] [drm] Initialized radeon 2.43.0 20080528 for 0000:02:00.0 on minor 0
<6>[    9.783591] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
<6>[   10.083529] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
<6>[   10.680103] fuse init (API version 7.23)
<6>[   10.935408] floppy0: no floppy controllers found
<3>[   11.186646] MCE 0x41c177: recovery action for high-order kernel page: Ignored
<6>[   11.830178] tg3 0000:05:00.0 ens5: Link is up at 1000 Mbps, full duplex
<6>[   11.830182] tg3 0000:05:00.0 ens5: Flow control is on for TX and on for RX
<6>[   11.830194] IPv6: ADDRCONF(NETDEV_CHANGE): ens5: link becomes ready
<3>[   13.156228] MCE 0xb507f: recovery action for dirty LRU page: Recovered
<3>[   13.157244] MCE: Killing gnome-shell:631 due to hardware memory corruption fault at 2e6f000
<3>[   14.599205] tpm_tis 00:00: tpm_transmit: tpm_send: error -62
<4>[   14.599223] tpm_tis: probe of 00:00 failed with error -62
<6>[   21.612743] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.430 msecs
<4>[   21.612748] perf interrupt took too long (11195 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
<3>[   24.203887] MCE 0x4091ef: recovery action for dirty LRU page: Recovered
<3>[   24.213699] MCE 0x42d657: recovery action for high-order kernel page: Ignored
<3>[   24.213741] MCE 0x408e0e: recovery action for dirty LRU page: Recovered
<3>[   25.203629] MCE 0x3feb4f: recovery action for dirty LRU page: Recovered
<3>[   25.236871] MCE 0x3fdef7: recovery action for dirty LRU page: Recovered
<3>[   25.236973] MCE: Killing pool:971 due to hardware memory corruption fault at 7f70340072d8
<3>[   25.243513] MCE 0x3fd507: recovery action for dirty LRU page: Recovered
<3>[   28.232994] MCE 0x3f1def: recovery action for dirty LRU page: Recovered
<3>[   28.233496] MCE: Killing evolution-addre:1296 due to hardware memory corruption fault at 7fcc30231018
<3>[   28.242823] MCE 0x3f1a47: recovery action for dirty LRU page: Recovered
<3>[   31.232139] MCE 0x3efe2f: recovery action for dirty LRU page: Recovered
<3>[   31.232242] MCE: Killing evolution-calen:1346 due to hardware memory corruption fault at 2e33098
<3>[   36.141200] MCE 0x3ad9ff: recovery action for dirty LRU page: Recovered
<3>[   37.258764] MCE: Killing mprime:1365 due to hardware memory corruption fault at 7fed5f7ffff0
<4>[   37.811619] perf interrupt took too long (11132 > 4960), lowering kernel.perf_event_max_sample_rate to 25200
<3>[   38.170722] MCE 0x37ddef: recovery action for dirty LRU page: Recovered
<3>[   38.180601] MCE 0x802de: recovery action for dirty LRU page: Recovered
<3>[   38.210601] MCE 0x37b82f: recovery action for dirty LRU page: Recovered
<3>[   39.210347] MCE 0x35cc1f: recovery action for dirty LRU page: Recovered
<3>[   56.330743] MCE 0x355bff: recovery action for dirty LRU page: Recovered
<3>[   56.634738] MCE: Killing mprime:1401 due to hardware memory corruption fault at 7fc1985ffff0
<3>[   57.234231] MCE 0x346b56: recovery action for dirty LRU page: Recovered
<3>[   57.294329] MCE 0x3430cf: recovery action for dirty LRU page: Recovered
<3>[   57.324406] MCE 0x341bc6: recovery action for dirty LRU page: Recovered
<4>[   58.042905] perf interrupt took too long (11069 > 9920), lowering kernel.perf_event_max_sample_rate to 12600
<3>[   80.246420] MCE: 0x3f6517: non anonymous thp
<3>[   80.246427] MCE 0x3f6517: recovery action for high-order kernel page: Ignored

Last edited by elninja (2015-12-19 19:42:44)

mich41 · 2015-12-19 22:37:12

Just FYI

<5>[    0.026062] CMCI storm detected: switching to poll mode

Seems to mean "corrected machine check interrupt". Are you really sure you paid for your Windows ECC license?

Although, otoh, CentOS I'd expect to support ECC out of the box. Maybe some arcane power management bug? Try acpi=off. And it's Intel? So intel_pstate=disable as well.

Last edited by mich41 (2015-12-19 22:54:27)

elninja · 2016-01-19 00:42:58

Finally solved, the bad part is that I don't know why exactly.

To recap.
I was experiencing memory corruption issues on my Lenovo D20 Thinkstation with one X5670 Xeon processor (out of two slots) and 16 GB of RAM installed in 4 out of 6 slots in bank 0.
The memory corruption went away when running on three or one sticks of RAM. The ECC RAM was all fine and tested.

I purchased 48GBs of ECC registered RAM to fill out all 12 memory slots in my PC and everything is working all right, even reusing the old RAM.
Just as a note, because my PC can use two CPUs and I only have installed one, it means I can use only half of the RAM available until I can get another X5670. I'm still happy with the current 24GB available.

I just wish I could know why it didn't work the first time around and why Arch gave me so much trouble when CentOS and Windows 10 took up the same configuration without a hitch.

Arch Linux

#1 2015-12-18 17:56:29

[SOLVED] Corrupted Memory Arch specific

#2 2015-12-18 18:06:57

Re: [SOLVED] Corrupted Memory Arch specific

#3 2015-12-18 18:09:57

Re: [SOLVED] Corrupted Memory Arch specific

#4 2015-12-18 18:10:15

Re: [SOLVED] Corrupted Memory Arch specific

#5 2015-12-18 18:18:46

Re: [SOLVED] Corrupted Memory Arch specific

#6 2015-12-18 18:21:22

Re: [SOLVED] Corrupted Memory Arch specific

#7 2015-12-18 18:36:51

Re: [SOLVED] Corrupted Memory Arch specific

#8 2015-12-18 18:38:28

Re: [SOLVED] Corrupted Memory Arch specific

#9 2015-12-18 18:46:34

Re: [SOLVED] Corrupted Memory Arch specific

#10 2015-12-18 18:51:12

Re: [SOLVED] Corrupted Memory Arch specific

#11 2015-12-18 18:52:20

Re: [SOLVED] Corrupted Memory Arch specific

#12 2015-12-18 18:53:28

Re: [SOLVED] Corrupted Memory Arch specific

#13 2015-12-19 03:57:31

Re: [SOLVED] Corrupted Memory Arch specific

#14 2015-12-19 12:16:21

Re: [SOLVED] Corrupted Memory Arch specific

#15 2015-12-19 18:36:10

Re: [SOLVED] Corrupted Memory Arch specific

#16 2015-12-19 19:06:52

Re: [SOLVED] Corrupted Memory Arch specific

#17 2015-12-19 19:27:45

Re: [SOLVED] Corrupted Memory Arch specific

#18 2015-12-19 19:38:24

Re: [SOLVED] Corrupted Memory Arch specific

#19 2015-12-19 22:37:12

Re: [SOLVED] Corrupted Memory Arch specific

#20 2016-01-19 00:42:58

Re: [SOLVED] Corrupted Memory Arch specific

Board footer