You are not logged in.
- Topics: Active | Unanswered
Pages: 1
Topic closed
#1 2012-07-23 15:35:17
- pablox
- Member
- From: /home/chile/santiago/
- Registered: 2008-05-14
- Posts: 183
- Website
[SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
I know my graphic card (Dell Studio 1555) is an Intel Mobile 4 Series Chipset Integrated Graphics Controller
lspci -vv
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Dell Device 02be
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device 02be
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Dell Device 02be
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device 02be
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device 02be
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device 02be
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device 02be
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at fc904800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Dell Device 02be
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fc700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fc500000-fc5fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device 02be
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device 02be
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device 02be
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device 02be
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc904c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=32
Memory behind bridge: fc600000-fc6fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
Subsystem: Dell Device 02be
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 02be
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at 1818 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1810 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at fc904000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Dell Device 02be
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c0200000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
04:00.0 Network controller: Intel Corporation WiFi Link 5100
Subsystem: Intel Corporation WiFi Link 5100 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
Subsystem: Dell Device 02be
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at fc500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
09:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Device 02be
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fc600000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
09:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) (prog-if 01)
Subsystem: Dell Device 02be
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fc600800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
09:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
Subsystem: Dell Device 02be
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fc601000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r592
09:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Subsystem: Dell Device 02be
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fc601400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r852lshw
studio
description: Portable Computer
product: Studio 1555 ()
vendor: Dell Inc.
version: A08
serial: 17T0YK1
width: 64 bits
capabilities: smbios-2.5 dmi-2.5 vsyscall32
configuration: administrator_password=disabled boot=normal chassis=portable frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=44454C4C-3700-1054-8030-B1C04F594B31
*-core
description: Motherboard
product: 0D177M
vendor: Dell Inc.
physical id: 0
version: A08
serial: .17T0YK1.CN4864396J5929.
*-firmware
description: BIOS
vendor: Dell Inc.
physical id: 1
version: A08
date: 11/07/2009
size: 113KiB
capacity: 1984KiB
capabilities: pci pnp upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot smartbattery biosbootspecification netboot
*-cpu
description: CPU
product: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz
vendor: Intel Corp.
physical id: 5
bus info: cpu@0
version: CPU Version
slot: U2E1
size: 800MHz
capacity: 800MHz
width: 64 bits
clock: 1066MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida dtherm tpr_shadow vnmi flexpriority cpufreq
configuration: cores=2 enabledcores=2 threads=2
*-cache:0
description: L1 cache
physical id: 6
slot: L1 Cache
size: 64KiB
capacity: 64KiB
capabilities: asynchronous internal write-back data
*-cache:1
description: L2 cache
physical id: 7
slot: L2 Cache
size: 3MiB
capacity: 3MiB
capabilities: burst internal write-back instruction
*-memory
description: System Memory
physical id: 15
slot: System board or motherboard
size: 4GiB
*-bank:0
description: SODIMM DDR2 Synchronous 800 MHz (1,2 ns)
product: M4 70T5663EH3-CF7
vendor: Samsung
physical id: 0
serial: 75D466C8
slot: DIMM_A
size: 2GiB
width: 64 bits
clock: 800MHz (1.2ns)
*-bank:1
description: SODIMM DDR2 Synchronous 800 MHz (1,2 ns)
product: M4 70T5663EH3-CF7
vendor: Samsung
physical id: 1
serial: 75D46A88
slot: DIMM_B
size: 2GiB
width: 64 bits
clock: 800MHz (1.2ns)
*-pci
description: Host bridge
product: Mobile 4 Series Chipset Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 07
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel
resources: irq:0
*-display:0
description: VGA compatible controller
product: Mobile 4 Series Chipset Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 07
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:44 memory:fc000000-fc3fffff memory:d0000000-dfffffff ioport:1800(size=8)
*-display:1 UNCLAIMED
description: Display controller
product: Mobile 4 Series Chipset Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: 07
width: 64 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=0
resources: memory:fc400000-fc4fffff
*-usb:0
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:1820(size=32)
*-usb:1
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #5
vendor: Intel Corporation
physical id: 1a.1
bus info: pci@0000:00:1a.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:21 ioport:1840(size=32)
*-usb:2
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #6
vendor: Intel Corporation
physical id: 1a.2
bus info: pci@0000:00:1a.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:19 ioport:1860(size=32)
*-usb:3
description: USB controller
product: 82801I (ICH9 Family) USB2 EHCI Controller #2
vendor: Intel Corporation
physical id: 1a.7
bus info: pci@0000:00:1a.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0
resources: irq:19 memory:fc904800-fc904bff
*-multimedia
description: Audio device
product: 82801I (ICH9 Family) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 03
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:46 memory:fc700000-fc703fff
*-pci:0
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:40 ioport:2000(size=4096) memory:f6000000-f7ffffff ioport:f0000000(size=33554432)
*-pci:1
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:41 ioport:3000(size=4096) memory:f8000000-f9ffffff ioport:f2000000(size=33554432)
*-network
description: Wireless interface
product: WiFi Link 5100
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:04:00.0
logical name: wlan0
version: 00
serial: 00:24:d6:4c:f6:e6
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=3.4.6-1-ARCH firmware=8.83.5.1 build 33692 ip=192.168.0.90 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
resources: irq:47 memory:f8000000-f8001fff
*-pci:2
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 4
vendor: Intel Corporation
physical id: 1c.3
bus info: pci@0000:00:1c.3
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:42 ioport:4000(size=4096) memory:fa000000-fbffffff ioport:f4000000(size=33554432)
*-pci:3
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 6
vendor: Intel Corporation
physical id: 1c.5
bus info: pci@0000:00:1c.5
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:43 ioport:5000(size=4096) memory:fc500000-fc5fffff ioport:c0000000(size=2097152)
*-network
description: Ethernet interface
product: NetLink BCM5784M Gigabit Ethernet PCIe
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:08:00.0
logical name: eth0
version: 10
serial: 00:22:19:f4:9a:16
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 firmware=sb v2.17 latency=0 link=no multicast=yes port=twisted pair
resources: irq:48 memory:fc500000-fc50ffff
*-usb:4
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:1880(size=32)
*-usb:5
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:19 ioport:18a0(size=32)
*-usb:6
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:18c0(size=32)
*-usb:7
description: USB controller
product: 82801I (ICH9 Family) USB2 EHCI Controller #1
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0
resources: irq:23 memory:fc904c00-fc904fff
*-pci:4
description: PCI bridge
product: 82801 Mobile PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: 93
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
resources: memory:fc600000-fc6fffff
*-firewire
description: FireWire (IEEE 1394)
product: R5C832 IEEE 1394 Controller
vendor: Ricoh Co Ltd
physical id: 1
bus info: pci@0000:09:01.0
version: 05
width: 32 bits
clock: 33MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=32 maxlatency=4 mingnt=2
resources: irq:17 memory:fc600000-fc6007ff
*-generic:0
description: SD Host controller
product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
vendor: Ricoh Co Ltd
physical id: 1.1
bus info: pci@0000:09:01.1
version: 22
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=sdhci-pci latency=64
resources: irq:18 memory:fc600800-fc6008ff
*-generic:1
description: System peripheral
product: R5C592 Memory Stick Bus Host Adapter
vendor: Ricoh Co Ltd
physical id: 1.2
bus info: pci@0000:09:01.2
version: 12
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=r592 latency=64
resources: irq:18 memory:fc601000-fc6010ff
*-generic:2
description: System peripheral
product: xD-Picture Card Controller
vendor: Ricoh Co Ltd
physical id: 1.3
bus info: pci@0000:09:01.3
version: 12
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=r852 latency=64
resources: irq:18 memory:fc601400-fc6014ff
*-isa
description: ISA bridge
product: ICH9M LPC Interface Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: latency=0
*-storage
description: SATA controller
product: 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 03
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:45 ioport:1818(size=8) ioport:180c(size=4) ioport:1810(size=8) ioport:1808(size=4) ioport:18e0(size=32) memory:fc904000-fc9047ff
*-serial UNCLAIMED
description: SMBus
product: 82801I (ICH9 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 03
width: 64 bits
clock: 33MHz
configuration: latency=0
resources: memory:c0200000-c02000ff ioport:1c00(size=32)
*-scsi:0
physical id: 0
logical name: scsi0
capabilities: emulated
*-disk
description: ATA Disk
product: WDC WD5000BPVT-0
vendor: Western Digital
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 01.0
serial: WD-WXL1AC0J9190
size: 465GiB (500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=000bfe36
*-volume:0
description: Windows NTFS volume
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
version: 3.1
serial: 242b-f57b
size: 98MiB
capacity: 100MiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2011-06-27 09:57:37 filesystem=ntfs label=System Reserved state=clean
*-volume:1
description: Windows NTFS volume
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
version: 3.1
serial: 3c9a8d2d-744b-eb4a-b974-2bd33522abfd
size: 90GiB
capacity: 90GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2011-06-27 09:58:07 filesystem=ntfs state=clean
*-volume:2
description: Extended partition
physical id: 3
bus info: scsi@0:0.0.0,3
logical name: /dev/sda3
size: 309GiB
capacity: 309GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux filesystem partition
physical id: 5
logical name: /dev/sda5
logical name: /boot
capacity: 1085MiB
configuration: mount.fstype=ext4 mount.options=rw,noatime,data=ordered state=mounted
*-logicalvolume:1
description: Linux LVM Physical Volume partition
physical id: 6
logical name: /dev/sda6
serial: XYDDmi-JtNc-MHbS-2DEx-JiBj-1l2p-ewJdvl
size: 308GiB
capacity: 308GiB
capabilities: multi lvm2
*-scsi:1
physical id: 2
logical name: scsi1
capabilities: emulated
*-cdrom
description: DVD-RAM writer
product: DVD+-RW GA11N
vendor: HL-DT-ST
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/cdrom
logical name: /dev/sr0
version: A101
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=open
*-remoteaccess UNCLAIMED
vendor: Intel
physical id: 1
capabilities: outbound
*-power UNCLAIMED
description: To Be Defined By O.E.M
product: To Be Defined By O.E.M
vendor: To Be Defined By O.E.M
physical id: 2
version: 2.50
serial: To Be Defined By O.E.M
capacity: 32768mWhIn both outputs says something about kernel driver in use: i915. But, I'm not sure if that means it's right. I'm loading the i915 module in my mkinitcpio.conf, so I don't know if I'm "forcing" that module. Who knows? Maybe my kernel is using a different driver and I could get a better performance.
EDIT: Marked as solved :)
Last edited by pablox (2012-08-06 20:59:16)
Geeks & Linux Atelier
An eye for an eye ... ends in making everybody blind -- Mahatma Gandhi
dotfiles
Offline
#2 2012-07-23 16:34:14
- anonymous_user
- Member
- Registered: 2009-08-28
- Posts: 3,059
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
According to the manual and specification it should be a Intel GMA 4500MHD. Though all my search for that graphics mention the "intel" driver not "i915".
BTW: I have NO experience with Intel graphics so perhaps wait for someone more qualified to answer 
Last edited by anonymous_user (2012-07-23 16:34:54)
Offline
#3 2012-07-23 19:47:54
- pablox
- Member
- From: /home/chile/santiago/
- Registered: 2008-05-14
- Posts: 183
- Website
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
anonymous_user wrote:
According to the manual and specification it should be a Intel GMA 4500MHD. Though all my search for that graphics mention the "intel" driver not "i915".
BTW: I have NO experience with Intel graphics so perhaps wait for someone more qualified to answer
Well, yes. I didn't explain myself properly. I'm wondering if that's the correct module, not driver.
Where did you get that "manual and specification"?
Geeks & Linux Atelier
An eye for an eye ... ends in making everybody blind -- Mahatma Gandhi
dotfiles
Offline
#4 2012-07-23 20:05:59
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,607
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
Drivers have several different components. When it comes to Intel:
- the kernel module is "i915" for all Intel graphics
- the 2D component is "intel" for all Intel graphics
- the 3D component is "i915" (for i8xx, i915, i945 and 3xxx) or "i965" (for everything newer than that)
(let's ignore i810 here, for simplicity's sake 
)
Offline
#5 2012-07-23 20:28:25
- pablox
- Member
- From: /home/chile/santiago/
- Registered: 2008-05-14
- Posts: 183
- Website
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
Gusar wrote:
Drivers have several different components. When it comes to Intel:
- the kernel module is "i915" for all Intel graphics
- the 2D component is "intel" for all Intel graphics
- the 3D component is "i915" (for i8xx, i915, i945 and 3xxx) or "i965" (for everything newer than that)(let's ignore i810 here, for simplicity's sake :))
Thanks for the clarification :). So, according to that, having installed xf86-video-intel is all that I need? How do I now if my laptop is using the i915 or i965 component for 3D (supposing that my laptop is 4xxx according to anonymous_user)?
I wonder because I was reading the Intel article in the wiki, and the HW acceleration part draw my attention. And I'm not sure if my chipset actually supports that or not.
Also, because I'm having some issues with flash, to correct diagnose the problem I need more info about my graphic card :)
Geeks & Linux Atelier
An eye for an eye ... ends in making everybody blind -- Mahatma Gandhi
dotfiles
Offline
#6 2012-07-23 20:53:15
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,607
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
pablox wrote:
So, according to that, having installed xf86-video-intel is all that I need?
And intel-dri, it contains the 3D component, but you already have that, as it's a dependency of xf86-video-intel.
pablox wrote:
How do I now if my laptop is using the i915 or i965 component for 3D (supposing that my laptop is 4xxx according to anonymous_user)?
Well, 4500 is not among the stuff I listed for i915, so you're using i965.
pablox wrote:
I wonder because I was reading the Intel article in the wiki, and the HW acceleration part draw my attention. And I'm not sure if my chipset actually supports that or not.
Depends. There's 4500M and 4500MHD, only the latter has a hardware decoder. Install libva and run vainfo, it'll tell you if your chip has hardware decoding. Edit: Oops, installing libva won't do, you need a special branch, so install the packages that the wiki page lists.
pablox wrote:
Also, because I'm having some issues with flash, to correct diagnose the problem I need more info about my graphic card
I doubt those are connected to the graphic card. Unless one is using VDPAU (which you're not), flash does pretty much everything in software.
Last edited by Gusar (2012-07-23 22:24:09)
Offline
#7 2012-07-24 01:23:19
- pablox
- Member
- From: /home/chile/santiago/
- Registered: 2008-05-14
- Posts: 183
- Website
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
After following the suggestion, before:
$ vainfo
libva: VA-API version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib/dri/i965_drv_video.so
libva: va_openDriver() returns 0
vainfo: VA-API version: 0.32 (libva 1.0.15)
vainfo: Driver version: Intel i965 driver - 1.0.15
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD After installing libva-g45-h264 and libva-driver-intel-g45-h264:
$ vainfo
libva: libva version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib/dri/i965_drv_video.so
libva: va_openDriver() returns 0
vainfo: VA API version: 0.32
vainfo: Driver version: Intel i965 driver - 1.0.14
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileH264Baseline : VAEntrypointVLD
VAProfileH264Main : VAEntrypointVLD
VAProfileH264High : VAEntrypointVLDSo, I guess it worked. Anyway, I still don't know how you are supposed to know which chipset the intel graphic card has 
Last edited by pablox (2012-07-24 01:23:39)
Geeks & Linux Atelier
An eye for an eye ... ends in making everybody blind -- Mahatma Gandhi
dotfiles
Offline
#8 2012-07-24 02:13:39
- anonymous_user
- Member
- Registered: 2009-08-28
- Posts: 3,059
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
pablox wrote:
Anyway, I still don't know how you are supposed to know which chipset the intel graphic card has
Its probably easier just to look up the specifications for your computer. I find yours by just googling for "Dell Studio 1555 specifications" but you could just go to the Dell support website and search there.
Offline
#9 2012-07-24 05:20:21
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 20,655
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
ewaller@odin:~ 1001 %lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93)
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
04:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382]
04:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381]
04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383]
04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2384]
ewaller@odin:~ 1002 %Each of those devices has a 32 bit hexadecimal identifier presented as [xxxx:xxxx] The first four digits are the Vendor ID. The last four digits are the Product ID. In the example from my system, note all the Intel products. The vendor ID for all Intel products is 8086 (Cute, eh?). The product ID is vendor defined and is supposed to identify the product; sometimes it is used to identify products that use the same driver. Regardless, the 32 number is used to associate the hardware with the appropriate kernel module.
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
#10 2012-07-24 15:20:43
- pablox
- Member
- From: /home/chile/santiago/
- Registered: 2008-05-14
- Posts: 183
- Website
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
anonymous_user wrote:
pablox wrote:Anyway, I still don't know how you are supposed to know which chipset the intel graphic card has :P
Its probably easier just to look up the specifications for your computer. I find yours by just googling for "Dell Studio 1555 specifications" but you could just go to the Dell support website and search there.
I know, the problem is that not all Dell Laptops are created equally, so simply searching sometimes is not enough. Still it's a good option that most times helps, maybe I should have start from there. I was looking a way for doing it from the laptop itself.
ewaller wrote:
ewaller@odin:~ 1001 %lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) 04:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382] 04:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381] 04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] 04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2384] ewaller@odin:~ 1002 %Each of those devices has a 32 bit hexadecimal identifier presented as [xxxx:xxxx] The first four digits are the Vendor ID. The last four digits are the Product ID. In the example from my system, note all the Intel products. The vendor ID for all Intel products is 8086 (Cute, eh?). The product ID is vendor defined and is supposed to identify the product; sometimes it is used to identify products that use the same driver. Regardless, the 32 number is used to associate the hardware with the appropriate kernel module.
Thanks, we have the same graphic card btw :P.
After all this responses, my conclusion is that there isn't a "generic" way to know which chipset do you have or the exact model of your graphic card (I was thinking in something like everlast or device manager in Windows).
Anyway, thanks for your help, no doubt this is going to be useful in the future :)
Geeks & Linux Atelier
An eye for an eye ... ends in making everybody blind -- Mahatma Gandhi
dotfiles
Offline
#11 2012-07-24 16:25:44
- anonymous_user
- Member
- Registered: 2009-08-28
- Posts: 3,059
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
pablox wrote:
I know, the problem is that not all Dell Laptops are created equally, so simply searching sometimes is not enough.
Well its not likely a particular model can have different Intel graphics. Furthermore your laptop should have a service tag number so you can find the information specifically about your laptop.
pablox wrote:
After all this responses, my conclusion is that there isn't a "generic" way to know which chipset do you have or the exact model of your graphic card (I was thinking in something like everlast or device manager in Windows).
I think it depends on your graphics chipset. It seems Intel's names are rather generic and you would have to lookup the product identifer number as mentioned by ewaller. NVIDIA gives better information:
~ > lspci | grep VGA
02:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560] (rev a1)Last edited by anonymous_user (2012-07-24 16:26:55)
Offline
#12 2012-07-25 15:39:53
- pablox
- Member
- From: /home/chile/santiago/
- Registered: 2008-05-14
- Posts: 183
- Website
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
anonymous_user wrote:
pablox wrote:I know, the problem is that not all Dell Laptops are created equally, so simply searching sometimes is not enough.
Well its not likely a particular model can have different Intel graphics. Furthermore your laptop should have a service tag number so you can find the information specifically about your laptop.
pablox wrote:After all this responses, my conclusion is that there isn't a "generic" way to know which chipset do you have or the exact model of your graphic card (I was thinking in something like everlast or device manager in Windows).
I think it depends on your graphics chipset. It seems Intel's names are rather generic and you would have to lookup the product identifer number as mentioned by ewaller. NVIDIA gives better information:
~ > lspci | grep VGA 02:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560] (rev a1)
I can see that, thanks a lot for your help .
Geeks & Linux Atelier
An eye for an eye ... ends in making everybody blind -- Mahatma Gandhi
dotfiles
Offline
#13 2012-07-25 15:55:03
- x33a
- Forum Fellow
- Registered: 2009-08-15
- Posts: 4,587
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
ewaller wrote:
ewaller@odin:~ 1001 %lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [snip] 04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] 04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2384] ewaller@odin:~ 1002 %Each of those devices has a 32 bit hexadecimal identifier presented as [xxxx:xxxx] The first four digits are the Vendor ID. The last four digits are the Product ID. In the example from my system, note all the Intel products. The vendor ID for all Intel products is 8086 (Cute, eh?). The product ID is vendor defined and is supposed to identify the product; sometimes it is used to identify products that use the same driver. Regardless, the 32 number is used to associate the hardware with the appropriate kernel module.
Thanks, that's very useful.
Offline
#14 2015-12-27 18:38:41
- dsminotauro
- Member
- Registered: 2015-12-27
- Posts: 4
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
I know this post is a quite old but I think it's worth sharing the information I have come across.
@pablox:
Considering your output
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)VendorId: 8086
Chipset ID: 2a42
as ewaller said.
Then if you follow this link you will find out your chipset, which is: GMA 4500MHD
Offline
#15 2015-12-27 19:57:02
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,426
- Website
Re: [SOLVED]: How do I know which Intel Graphic Chipset my laptop has?
Please don't necrobump, especially solved threads: https://wiki.archlinux.org/index.php/Fo … bumping.22
Closing
Offline
Pages: 1
Topic closed