You are not logged in.

Pages: 1

#1 2016-01-14 08:06:06

MazeChaZer
Member
Registered: 2016-01-14
Posts: 4

[Solved] Laptop --> HDMI --> cable --> DVI --> Monitor stopped working

For a few days now I'm unable to use my external monitor. Before it has been working fine for months. I assume the issue is related to some xorg/driver update, as the problem came up after a reboot. I read the wiki articles about xorg and Multihead setup, but was unable to find anything relevant. The laptop is a Dell Latitude E5540.

$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)

/var/log/Xorg.0.log

[    11.226] 
X.Org X Server 1.18.0
Release Date: 2015-11-09
[    11.226] X Protocol Version 11, Revision 0
[    11.226] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[    11.226] Current Operating System: Linux arch 4.3.3-2-ARCH #1 SMP PREEMPT Wed Dec 23 20:09:18 CET 2015 x86_64
[    11.226] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw
[    11.226] Build Date: 08 January 2016  05:56:16PM
[    11.226]  
[    11.226] Current version of pixman: 0.32.8
[    11.226] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    11.226] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.226] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 14 08:13:11 2016
[    11.228] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    11.229] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.230] (==) No Layout section.  Using the first Screen section.
[    11.230] (==) No screen section available. Using defaults.
[    11.230] (**) |-->Screen "Default Screen Section" (0)
[    11.230] (**) |   |-->Monitor "<default monitor>"
[    11.231] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    11.231] (==) Automatically adding devices
[    11.231] (==) Automatically enabling devices
[    11.231] (==) Automatically adding GPU devices
[    11.231] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    11.238] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    11.238] 	Entry deleted from font path.
[    11.238] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    11.239] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    11.239] 	Entry deleted from font path.
[    11.239] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    11.239] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[    11.239] (==) ModulePath set to "/usr/lib/xorg/modules"
[    11.239] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    11.239] (II) Loader magic: 0x819d40
[    11.239] (II) Module ABI versions:
[    11.239] 	X.Org ANSI C Emulation: 0.4
[    11.239] 	X.Org Video Driver: 20.0
[    11.239] 	X.Org XInput driver : 22.1
[    11.239] 	X.Org Server Extension : 9.0
[    11.242] (++) using VT number 1

[    11.242] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    11.244] (II) xfree86: Adding drm device (/dev/dri/card0)
[    11.253] (--) PCI:*(0:0:2:0) 8086:0a16:1028:05e0 rev 11, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[    11.253] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    11.254] (II) LoadModule: "glx"
[    11.262] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    11.278] (II) Module glx: vendor="X.Org Foundation"
[    11.278] 	compiled for 1.18.0, module version = 1.0.0
[    11.278] 	ABI class: X.Org Server Extension, version 9.0
[    11.278] (==) AIGLX enabled
[    11.279] (==) Matched intel as autoconfigured driver 0
[    11.279] (==) Matched intel as autoconfigured driver 1
[    11.279] (==) Matched modesetting as autoconfigured driver 2
[    11.279] (==) Matched fbdev as autoconfigured driver 3
[    11.279] (==) Matched vesa as autoconfigured driver 4
[    11.279] (==) Assigned the driver to the xf86ConfigLayout
[    11.279] (II) LoadModule: "intel"
[    11.281] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    11.284] (II) Module intel: vendor="X.Org Foundation"
[    11.284] 	compiled for 1.18.0, module version = 2.99.917
[    11.284] 	Module class: X.Org Video Driver
[    11.284] 	ABI class: X.Org Video Driver, version 20.0
[    11.284] (II) LoadModule: "modesetting"
[    11.285] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    11.286] (II) Module modesetting: vendor="X.Org Foundation"
[    11.286] 	compiled for 1.18.0, module version = 1.18.0
[    11.286] 	Module class: X.Org Video Driver
[    11.286] 	ABI class: X.Org Video Driver, version 20.0
[    11.286] (II) LoadModule: "fbdev"
[    11.287] (WW) Warning, couldn't open module fbdev
[    11.287] (II) UnloadModule: "fbdev"
[    11.287] (II) Unloading fbdev
[    11.287] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    11.287] (II) LoadModule: "vesa"
[    11.288] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    11.288] (II) Module vesa: vendor="X.Org Foundation"
[    11.288] 	compiled for 1.18.0, module version = 2.3.4
[    11.289] 	Module class: X.Org Video Driver
[    11.289] 	ABI class: X.Org Video Driver, version 20.0
[    11.289] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    11.289] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    11.289] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    11.289] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    11.290] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    11.290] (II) VESA: driver for VESA chipsets: vesa
[    11.291] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150731
[    11.291] (II) intel(0): SNA compiled from 2.99.917-519-g8229390
[    11.292] (WW) Falling back to old probe method for modesetting
[    11.292] (WW) Falling back to old probe method for vesa
[    11.294] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[    11.294] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[    11.294] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    11.294] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    11.294] (==) intel(0): RGB weight 888
[    11.294] (==) intel(0): Default visual is TrueColor
[    11.295] (II) intel(0): Output eDP1 using monitor section eDP1
[    11.313] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    11.313] (II) intel(0): Enabled output eDP1
[    11.313] (II) intel(0): Output DP1 has no monitor section
[    11.313] (II) intel(0): Enabled output DP1
[    11.313] (II) intel(0): Output HDMI1 using monitor section HDMI1
[    11.313] (II) intel(0): Enabled output HDMI1
[    11.313] (II) intel(0): Output HDMI2 has no monitor section
[    11.313] (II) intel(0): Enabled output HDMI2
[    11.314] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    11.314] (II) intel(0): Output VIRTUAL1 has no monitor section
[    11.314] (II) intel(0): Enabled output VIRTUAL1
[    11.314] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    11.314] (==) intel(0): TearFree disabled
[    11.314] (==) intel(0): DPI set to (96, 96)
[    11.314] (II) Loading sub module "dri2"
[    11.314] (II) LoadModule: "dri2"
[    11.314] (II) Module "dri2" already built-in
[    11.314] (II) Loading sub module "present"
[    11.314] (II) LoadModule: "present"
[    11.314] (II) Module "present" already built-in
[    11.314] (II) UnloadModule: "modesetting"
[    11.314] (II) Unloading modesetting
[    11.315] (II) UnloadModule: "vesa"
[    11.315] (II) Unloading vesa
[    11.315] (==) Depth 24 pixmap format is 32 bpp
[    11.319] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[    11.319] (==) intel(0): Backing store enabled
[    11.319] (==) intel(0): Silken mouse enabled
[    11.319] (II) intel(0): HW Cursor enabled
[    11.319] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    11.320] (==) intel(0): DPMS enabled
[    11.321] (==) intel(0): Display hotplug detection enabled
[    11.321] (II) intel(0): [DRI2] Setup complete
[    11.321] (II) intel(0): [DRI2]   DRI driver: i965
[    11.321] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    11.321] (II) intel(0): direct rendering: DRI2 enabled
[    11.321] (II) intel(0): hardware support for Present enabled
[    11.321] (--) RandR disabled
[    11.409] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    11.410] (II) AIGLX: enabled GLX_ARB_create_context
[    11.410] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    11.410] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    11.410] (II) AIGLX: enabled GLX_INTEL_swap_event
[    11.410] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    11.410] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    11.410] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    11.410] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    11.410] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    11.410] (II) AIGLX: Loaded and initialized i965
[    11.410] (II) GLX: Initialized DRI2 GL provider for screen 0
[    11.428] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    11.428] (II) intel(0): Setting screen physical size to 508 x 285
[    11.767] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    11.767] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.767] (**) Power Button: Applying InputClass "system-keyboard"
[    11.767] (II) LoadModule: "evdev"
[    11.768] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    11.771] (II) Module evdev: vendor="X.Org Foundation"
[    11.771] 	compiled for 1.18.0, module version = 2.10.1
[    11.771] 	Module class: X.Org XInput Driver
[    11.771] 	ABI class: X.Org XInput driver, version 22.1
[    11.771] (II) Using input driver 'evdev' for 'Power Button'
[    11.771] (**) Power Button: always reports core events
[    11.771] (**) evdev: Power Button: Device: "/dev/input/event6"
[    11.772] (--) evdev: Power Button: Vendor 0 Product 0x1
[    11.772] (--) evdev: Power Button: Found keys
[    11.772] (II) evdev: Power Button: Configuring as keyboard
[    11.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[    11.772] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    11.772] (**) Option "xkb_rules" "evdev"
[    11.772] (**) Option "xkb_model" "pc105"
[    11.772] (**) Option "xkb_layout" "de"
[    11.772] (**) Option "xkb_variant" "nodeadkeys"
[    11.772] (**) Option "xkb_options" "caps:escape"
[    11.841] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    11.841] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    11.841] (**) Video Bus: Applying InputClass "system-keyboard"
[    11.841] (II) Using input driver 'evdev' for 'Video Bus'
[    11.841] (**) Video Bus: always reports core events
[    11.841] (**) evdev: Video Bus: Device: "/dev/input/event12"
[    11.842] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    11.842] (--) evdev: Video Bus: Found keys
[    11.842] (II) evdev: Video Bus: Configuring as keyboard
[    11.842] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event12"
[    11.842] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    11.842] (**) Option "xkb_rules" "evdev"
[    11.842] (**) Option "xkb_model" "pc105"
[    11.842] (**) Option "xkb_layout" "de"
[    11.842] (**) Option "xkb_variant" "nodeadkeys"
[    11.842] (**) Option "xkb_options" "caps:escape"
[    11.845] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    11.845] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.845] (**) Power Button: Applying InputClass "system-keyboard"
[    11.845] (II) Using input driver 'evdev' for 'Power Button'
[    11.845] (**) Power Button: always reports core events
[    11.845] (**) evdev: Power Button: Device: "/dev/input/event4"
[    11.845] (--) evdev: Power Button: Vendor 0 Product 0x1
[    11.845] (--) evdev: Power Button: Found keys
[    11.845] (II) evdev: Power Button: Configuring as keyboard
[    11.845] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[    11.845] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    11.845] (**) Option "xkb_rules" "evdev"
[    11.845] (**) Option "xkb_model" "pc105"
[    11.845] (**) Option "xkb_layout" "de"
[    11.845] (**) Option "xkb_variant" "nodeadkeys"
[    11.846] (**) Option "xkb_options" "caps:escape"
[    11.848] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    11.848] (II) No input driver specified, ignoring this device.
[    11.848] (II) This device may have been added with another device file.
[    11.850] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    11.850] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    11.850] (**) Sleep Button: Applying InputClass "system-keyboard"
[    11.850] (II) Using input driver 'evdev' for 'Sleep Button'
[    11.850] (**) Sleep Button: always reports core events
[    11.850] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[    11.850] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    11.850] (--) evdev: Sleep Button: Found keys
[    11.850] (II) evdev: Sleep Button: Configuring as keyboard
[    11.850] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event5"
[    11.850] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    11.850] (**) Option "xkb_rules" "evdev"
[    11.851] (**) Option "xkb_model" "pc105"
[    11.851] (**) Option "xkb_layout" "de"
[    11.851] (**) Option "xkb_variant" "nodeadkeys"
[    11.851] (**) Option "xkb_options" "caps:escape"
[    11.855] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event16)
[    11.855] (II) No input driver specified, ignoring this device.
[    11.855] (II) This device may have been added with another device file.
[    11.856] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event17)
[    11.856] (II) No input driver specified, ignoring this device.
[    11.856] (II) This device may have been added with another device file.
[    11.858] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event18)
[    11.858] (II) No input driver specified, ignoring this device.
[    11.858] (II) This device may have been added with another device file.
[    11.859] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    11.860] (II) No input driver specified, ignoring this device.
[    11.860] (II) This device may have been added with another device file.
[    11.861] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event9)
[    11.861] (II) No input driver specified, ignoring this device.
[    11.861] (II) This device may have been added with another device file.
[    11.862] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event10)
[    11.862] (II) No input driver specified, ignoring this device.
[    11.862] (II) This device may have been added with another device file.
[    11.864] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[    11.864] (II) No input driver specified, ignoring this device.
[    11.864] (II) This device may have been added with another device file.
[    11.866] (II) config/udev: Adding input device Logitech K330 (/dev/input/event2)
[    11.866] (**) Logitech K330: Applying InputClass "evdev keyboard catchall"
[    11.866] (**) Logitech K330: Applying InputClass "system-keyboard"
[    11.866] (II) Using input driver 'evdev' for 'Logitech K330'
[    11.866] (**) Logitech K330: always reports core events
[    11.866] (**) evdev: Logitech K330: Device: "/dev/input/event2"
[    11.866] (--) evdev: Logitech K330: Vendor 0x46d Product 0x4016
[    11.866] (--) evdev: Logitech K330: Found 1 mouse buttons
[    11.866] (--) evdev: Logitech K330: Found scroll wheel(s)
[    11.866] (--) evdev: Logitech K330: Found relative axes
[    11.866] (II) evdev: Logitech K330: Forcing relative x/y axes to exist.
[    11.866] (--) evdev: Logitech K330: Found absolute axes
[    11.866] (II) evdev: Logitech K330: Forcing absolute x/y axes to exist.
[    11.866] (--) evdev: Logitech K330: Found keys
[    11.866] (II) evdev: Logitech K330: Configuring as mouse
[    11.866] (II) evdev: Logitech K330: Configuring as keyboard
[    11.866] (II) evdev: Logitech K330: Adding scrollwheel support
[    11.866] (**) evdev: Logitech K330: YAxisMapping: buttons 4 and 5
[    11.866] (**) evdev: Logitech K330: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    11.866] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input3/event2"
[    11.866] (II) XINPUT: Adding extended input device "Logitech K330" (type: KEYBOARD, id 10)
[    11.866] (**) Option "xkb_rules" "evdev"
[    11.866] (**) Option "xkb_model" "pc105"
[    11.866] (**) Option "xkb_layout" "de"
[    11.866] (**) Option "xkb_variant" "nodeadkeys"
[    11.867] (**) Option "xkb_options" "caps:escape"
[    11.867] (II) evdev: Logitech K330: initialized for relative axes.
[    11.867] (WW) evdev: Logitech K330: ignoring absolute axes.
[    11.868] (**) Logitech K330: (accel) keeping acceleration scheme 1
[    11.868] (**) Logitech K330: (accel) acceleration profile 0
[    11.868] (**) Logitech K330: (accel) acceleration factor: 2.000
[    11.868] (**) Logitech K330: (accel) acceleration threshold: 4
[    11.871] (II) config/udev: Adding input device Logitech M215 2nd Gen (/dev/input/event1)
[    11.871] (**) Logitech M215 2nd Gen: Applying InputClass "evdev pointer catchall"
[    11.871] (II) Using input driver 'evdev' for 'Logitech M215 2nd Gen'
[    11.871] (**) Logitech M215 2nd Gen: always reports core events
[    11.871] (**) evdev: Logitech M215 2nd Gen: Device: "/dev/input/event1"
[    11.871] (--) evdev: Logitech M215 2nd Gen: Vendor 0x46d Product 0x401b
[    11.871] (--) evdev: Logitech M215 2nd Gen: Found 20 mouse buttons
[    11.871] (--) evdev: Logitech M215 2nd Gen: Found scroll wheel(s)
[    11.871] (--) evdev: Logitech M215 2nd Gen: Found relative axes
[    11.871] (--) evdev: Logitech M215 2nd Gen: Found x and y relative axes
[    11.871] (II) evdev: Logitech M215 2nd Gen: Configuring as mouse
[    11.871] (II) evdev: Logitech M215 2nd Gen: Adding scrollwheel support
[    11.871] (**) evdev: Logitech M215 2nd Gen: YAxisMapping: buttons 4 and 5
[    11.871] (**) evdev: Logitech M215 2nd Gen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    11.871] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input2/event1"
[    11.872] (II) XINPUT: Adding extended input device "Logitech M215 2nd Gen" (type: MOUSE, id 11)
[    11.872] (II) evdev: Logitech M215 2nd Gen: initialized for relative axes.
[    11.872] (**) Logitech M215 2nd Gen: (accel) keeping acceleration scheme 1
[    11.872] (**) Logitech M215 2nd Gen: (accel) acceleration profile 0
[    11.872] (**) Logitech M215 2nd Gen: (accel) acceleration factor: 2.000
[    11.873] (**) Logitech M215 2nd Gen: (accel) acceleration threshold: 4
[    11.875] (II) config/udev: Adding input device Logitech M215 2nd Gen (/dev/input/mouse0)
[    11.875] (II) No input driver specified, ignoring this device.
[    11.875] (II) This device may have been added with another device file.
[    11.878] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event14)
[    11.878] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[    11.878] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "system-keyboard"
[    11.878] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[    11.878] (**) Laptop_Integrated_Webcam_HD: always reports core events
[    11.878] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event14"
[    11.878] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xc45 Product 0x649d
[    11.878] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[    11.878] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[    11.878] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input16/event14"
[    11.878] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 12)
[    11.878] (**) Option "xkb_rules" "evdev"
[    11.878] (**) Option "xkb_model" "pc105"
[    11.878] (**) Option "xkb_layout" "de"
[    11.878] (**) Option "xkb_variant" "nodeadkeys"
[    11.878] (**) Option "xkb_options" "caps:escape"
[    11.883] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    11.883] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    11.883] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    11.883] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    11.883] (**) AT Translated Set 2 keyboard: always reports core events
[    11.883] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    11.883] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    11.883] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    11.883] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    11.883] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    11.883] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    11.883] (**) Option "xkb_rules" "evdev"
[    11.883] (**) Option "xkb_model" "pc105"
[    11.883] (**) Option "xkb_layout" "de"
[    11.883] (**) Option "xkb_variant" "nodeadkeys"
[    11.883] (**) Option "xkb_options" "caps:escape"
[    11.885] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event15)
[    11.885] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    11.885] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    11.885] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[    11.885] (II) LoadModule: "synaptics"
[    11.885] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    11.894] (II) Module synaptics: vendor="X.Org Foundation"
[    11.894] 	compiled for 1.18.0, module version = 1.8.3
[    11.894] 	Module class: X.Org XInput Driver
[    11.894] 	ABI class: X.Org XInput driver, version 22.1
[    11.894] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    11.894] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    11.894] (**) Option "Device" "/dev/input/event15"
[    11.960] (II) synaptics: AlpsPS/2 ALPS GlidePoint: ignoring touch events for semi-multitouch device
[    11.960] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 2000 (res 24)
[    11.960] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 1400 (res 27)
[    11.960] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    11.960] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    11.960] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle double triple
[    11.960] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    11.960] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    11.960] (**) Option "TapButton1" "1"
[    11.960] (**) Option "TapButton2" "2"
[    11.960] (**) Option "TapButton3" "3"
[    11.960] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    11.960] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    11.990] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event15"
[    11.990] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 14)
[    11.990] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    11.990] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[    11.990] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.082
[    11.991] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    11.991] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    11.991] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    11.991] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    11.991] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    11.993] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    11.993] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[    11.994] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    11.994] (II) No input driver specified, ignoring this device.
[    11.994] (II) This device may have been added with another device file.
[    11.996] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event13)
[    11.996] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    11.996] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[    11.996] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    11.996] (**) Dell WMI hotkeys: always reports core events
[    11.996] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event13"
[    11.997] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    11.997] (--) evdev: Dell WMI hotkeys: Found keys
[    11.997] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    11.997] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event13"
[    11.997] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[    11.997] (**) Option "xkb_rules" "evdev"
[    11.997] (**) Option "xkb_model" "pc105"
[    11.997] (**) Option "xkb_layout" "de"
[    11.997] (**) Option "xkb_variant" "nodeadkeys"
[    11.997] (**) Option "xkb_options" "caps:escape"
[    13.318] (II) intel(0): EDID vendor "AUO", prod id 8685
[    13.318] (II) intel(0): Printing DDC gathered Modelines:
[    13.318] (II) intel(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2068 2100  1080 1083 1084 1110 +hsync -vsync (66.7 kHz eP)
[    13.318] (II) intel(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2068 2100  1080 1083 1084 1666 +hsync -vsync (66.7 kHz e)
[    25.762] (EE) intel(0): [DRI2] DRI2SwapComplete: bad drawable

Installed packages

xorg-server 1.18.0-4
xf86-video-intel 1:2.99.917+519+g8229390-1
$ ls /etc/X11/xorg.conf.d/
00-keyboard.conf

Last edited by MazeChaZer (2016-01-14 09:33:09)

Offline

#2 2016-01-14 08:16:38

Docbroke
Member
From: India
Registered: 2015-06-13
Posts: 1,461

Re: [Solved] Laptop --> HDMI --> cable --> DVI --> Monitor stopped working

Is your external monitor detected by 'xrandr'?

Arch is home!
https://github.com/Docbroke

Offline

#3 2016-01-14 09:27:21

MazeChaZer
Member
Registered: 2016-01-14
Posts: 4

Re: [Solved] Laptop --> HDMI --> cable --> DVI --> Monitor stopped working

I knew I would forget something, no xrandr didn't show the monitor.

Edit: It just started working again, I think something was wrong with the power supply. Sorry for the noise!

Offline

Pages: 1

Board footer

Powered by FluxBB