Arch Linux

Cube777

Member

Registered: 2015-09-15

Posts: 45

Website

Random kernel panic - ACPI

Hello everyone,

This morning booting Arch I got a kernel panic out of the blue. Running this on a relatively new PC I don't suspect hardware failure although journalctl mentions ACPI problems. After doing a force shutdown and starting up the PC right afterwards it worked flawlessly and is hasn't given any problems since. I have been running 4.3.3-2-zen for a few days now and had no problems. Journalctl -b -1 output:

-- Logs begin at Wed 2016-01-13 23:36:54 SAST, end at Thu 2016-01-14 06:10:28 SAST. --
Jan 14 06:08:25 the-one kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan 14 06:08:25 the-one kernel: efifb: probing for efifb
Jan 14 06:08:25 the-one kernel: efifb: framebuffer at 0xf1000000, mapped to 0xffffc90000800000, using 3072k, total 3072k
Jan 14 06:08:25 the-one kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1
Jan 14 06:08:25 the-one kernel: efifb: scrolling: redraw
Jan 14 06:08:25 the-one kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Jan 14 06:08:25 the-one kernel: Console: switching to colour frame buffer device 128x48
Jan 14 06:08:25 the-one kernel: fb0: EFI VGA frame buffer device
Jan 14 06:08:25 the-one kernel: intel_idle: MWAIT substates: 0x1120
Jan 14 06:08:25 the-one kernel: intel_idle: v0.4 model 0x3A
Jan 14 06:08:25 the-one kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
Jan 14 06:08:25 the-one kernel: GHES: HEST is not enabled!
Jan 14 06:08:25 the-one kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan 14 06:08:25 the-one kernel: 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Jan 14 06:08:25 the-one kernel: Linux agpgart interface v0.103
Jan 14 06:08:25 the-one kernel: rtc_cmos 00:02: RTC can wake from S4
Jan 14 06:08:25 the-one kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Jan 14 06:08:25 the-one kernel: rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Jan 14 06:08:25 the-one kernel: Intel P-state driver initializing.
Jan 14 06:08:25 the-one kernel: ledtrig-cpu: registered to indicate activity on CPUs
Jan 14 06:08:25 the-one kernel: NET: Registered protocol family 10
Jan 14 06:08:25 the-one kernel: NET: Registered protocol family 17
Jan 14 06:08:25 the-one kernel: registered taskstats version 1
Jan 14 06:08:25 the-one kernel: Loading compiled-in X.509 certificates
Jan 14 06:08:25 the-one kernel: zswap: loaded using pool lzo/zbud
Jan 14 06:08:25 the-one kernel:   Magic number: 0:506:110
Jan 14 06:08:25 the-one kernel: alarmtimer alarmtimer: hash matches
Jan 14 06:08:25 the-one kernel: rtc_cmos 00:02: setting system clock to 2016-01-14 04:08:19 UTC (1452744499)
Jan 14 06:08:25 the-one kernel: PM: Hibernation image not present or could not be loaded.
Jan 14 06:08:25 the-one kernel: Freeing unused kernel memory: 1192K (ffffffff818ed000 - ffffffff81a17000)
Jan 14 06:08:25 the-one kernel: Write protecting the kernel read-only data: 8192k
Jan 14 06:08:25 the-one kernel: Freeing unused kernel memory: 372K (ffff8800025a3000 - ffff880002600000)
Jan 14 06:08:25 the-one kernel: Freeing unused kernel memory: 236K (ffff8800027c5000 - ffff880002800000)
Jan 14 06:08:25 the-one kernel: CFS CPU scheduler.
Jan 14 06:08:25 the-one kernel: random: systemd-tmpfile urandom read with 1 bits of entropy available
Jan 14 06:08:25 the-one kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jan 14 06:08:25 the-one kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jan 14 06:08:25 the-one kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 14 06:08:25 the-one kernel: ACPI: bus type USB registered
Jan 14 06:08:25 the-one kernel: usbcore: registered new interface driver usbfs
Jan 14 06:08:25 the-one kernel: usbcore: registered new interface driver hub
Jan 14 06:08:25 the-one kernel: usbcore: registered new device driver usb
Jan 14 06:08:25 the-one kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 14 06:08:25 the-one kernel: ehci-pci: EHCI PCI platform driver
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1a.0: EHCI Host Controller
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1a.0: debug port 2
Jan 14 06:08:25 the-one kernel: SCSI subsystem initialized
Jan 14 06:08:25 the-one kernel: libata version 3.00 loaded.
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7107000
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Jan 14 06:08:25 the-one kernel: hub 1-0:1.0: USB hub found
Jan 14 06:08:25 the-one kernel: hub 1-0:1.0: 2 ports detected
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1d.0: EHCI Host Controller
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1d.0: debug port 2
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7106000
Jan 14 06:08:25 the-one kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Jan 14 06:08:25 the-one kernel: hub 2-0:1.0: USB hub found
Jan 14 06:08:25 the-one kernel: hub 2-0:1.0: 2 ports detected
Jan 14 06:08:25 the-one kernel: ata_piix 0000:00:1f.2: version 2.13
Jan 14 06:08:25 the-one kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Jan 14 06:08:25 the-one kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Jan 14 06:08:25 the-one kernel: scsi host0: ata_piix
Jan 14 06:08:25 the-one kernel: scsi host1: ata_piix
Jan 14 06:08:25 the-one kernel: ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
Jan 14 06:08:25 the-one kernel: ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
Jan 14 06:08:25 the-one kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Jan 14 06:08:25 the-one kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
Jan 14 06:08:25 the-one kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
Jan 14 06:08:25 the-one kernel: ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
Jan 14 06:08:25 the-one kernel: scsi host2: ata_piix
Jan 14 06:08:25 the-one kernel: scsi host3: ata_piix
Jan 14 06:08:25 the-one kernel: ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
Jan 14 06:08:25 the-one kernel: ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
Jan 14 06:08:25 the-one kernel: hub 1-1:1.0: USB hub found
Jan 14 06:08:25 the-one kernel: hub 1-1:1.0: 4 ports detected
Jan 14 06:08:25 the-one kernel: hub 2-1:1.0: USB hub found
Jan 14 06:08:25 the-one kernel: hub 2-1:1.0: 6 ports detected
Jan 14 06:08:25 the-one kernel: usb 1-1.1: new low-speed USB device number 3 using ehci-pci
Jan 14 06:08:25 the-one kernel: usb 2-1.6: new high-speed USB device number 3 using ehci-pci
Jan 14 06:08:25 the-one kernel: hidraw: raw HID events driver (C) Jiri Kosina
Jan 14 06:08:25 the-one kernel: usbcore: registered new interface driver usbhid
Jan 14 06:08:25 the-one kernel: usbhid: USB HID core driver
Jan 14 06:08:25 the-one kernel: input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1BCF:0005.0001/input/input1
Jan 14 06:08:25 the-one kernel: hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
Jan 14 06:08:25 the-one kernel: usb 1-1.2: new high-speed USB device number 4 using ehci-pci
Jan 14 06:08:25 the-one kernel: tsc: Refined TSC clocksource calibration: 3092.973 MHz
Jan 14 06:08:25 the-one kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns
Jan 14 06:08:25 the-one kernel: ata1.01: failed to resume link (SControl 0)
Jan 14 06:08:25 the-one kernel: ata2.01: failed to resume link (SControl 0)
Jan 14 06:08:25 the-one kernel: ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
Jan 14 06:08:25 the-one kernel: ata1.01: SATA link down (SStatus 0 SControl 0)
Jan 14 06:08:25 the-one kernel: ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
Jan 14 06:08:25 the-one kernel: ata2.01: SATA link down (SStatus 0 SControl 0)
Jan 14 06:08:25 the-one kernel: ata2.01: link offline, clearing class 3 to NONE
Jan 14 06:08:25 the-one kernel: ata1.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
Jan 14 06:08:25 the-one kernel: ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jan 14 06:08:25 the-one kernel: ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
Jan 14 06:08:25 the-one kernel: ata1.00: configured for UDMA/133
Jan 14 06:08:25 the-one kernel: scsi 0:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
Jan 14 06:08:25 the-one kernel: ata2.00: configured for UDMA/100
Jan 14 06:08:25 the-one kernel: scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB01 PQ: 0 ANSI: 5
Jan 14 06:08:25 the-one kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Jan 14 06:08:25 the-one kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
Jan 14 06:08:25 the-one kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 14 06:08:25 the-one kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 14 06:08:25 the-one kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 14 06:08:25 the-one kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jan 14 06:08:25 the-one kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 14 06:08:25 the-one kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jan 14 06:08:25 the-one kernel:  sda: sda1 sda2
Jan 14 06:08:25 the-one kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jan 14 06:08:25 the-one kernel: clocksource: Switched to clocksource tsc
Jan 14 06:08:25 the-one kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Jan 14 06:08:25 the-one kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 14 06:08:25 the-one systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
Jan 14 06:08:25 the-one systemd[1]: Detected architecture x86-64.
Jan 14 06:08:25 the-one systemd[1]: Set hostname to <the-one>.
Jan 14 06:08:25 the-one kernel: random: nonblocking pool is initialized
Jan 14 06:08:25 the-one systemd[1]: dbus.service: Cannot add dependency job, ignoring: Unit dbus.service is masked.
Jan 14 06:08:25 the-one systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
Jan 14 06:08:25 the-one systemd[1]: Created slice User and Session Slice.
Jan 14 06:08:25 the-one systemd[1]: Listening on LVM2 metadata daemon socket.
Jan 14 06:08:25 the-one systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Jan 14 06:08:25 the-one systemd[1]: Listening on Journal Socket (/dev/log).
Jan 14 06:08:25 the-one systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Jan 14 06:08:25 the-one systemd[1]: Listening on udev Kernel Socket.
Jan 14 06:08:25 the-one systemd[1]: Created slice System Slice.
Jan 14 06:08:25 the-one systemd[1]: Starting Replay Read-Ahead Data...
Jan 14 06:08:25 the-one systemd[1]: Starting Collect Read-Ahead Data...
Jan 14 06:08:25 the-one systemd[1]: Created slice system-systemd\x2dfsck.slice.
Jan 14 06:08:25 the-one systemd[1]: Listening on Device-mapper event daemon FIFOs.
Jan 14 06:08:25 the-one systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Jan 14 06:08:25 the-one systemd[1]: Reached target Paths.
Jan 14 06:08:25 the-one systemd[1]: Listening on Journal Socket.
Jan 14 06:08:25 the-one systemd-readahead[155]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
Jan 14 06:08:25 the-one systemd[1]: Starting Remount Root and Kernel File Systems...
Jan 14 06:08:25 the-one systemd[1]: Mounting Temporary Directory...
Jan 14 06:08:25 the-one systemd[1]: Mounting Debug File System...
Jan 14 06:08:25 the-one systemd[1]: Starting Create list of required static device nodes for the current kernel...
Jan 14 06:08:25 the-one systemd[1]: Mounting Configuration File System...
Jan 14 06:08:25 the-one systemd[1]: Created slice system-getty.slice.
Jan 14 06:08:25 the-one systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Jan 14 06:08:25 the-one systemd[1]: Reached target Encrypted Volumes.
Jan 14 06:08:25 the-one systemd[1]: Starting Setup Virtual Console...
Jan 14 06:08:25 the-one systemd[1]: Starting Apply Kernel Variables...
Jan 14 06:08:25 the-one systemd[1]: Listening on udev Control Socket.
Jan 14 06:08:25 the-one systemd[1]: Reached target Remote File Systems.
Jan 14 06:08:25 the-one systemd[1]: Reached target Slices.
Jan 14 06:08:25 the-one systemd[1]: Mounting Huge Pages File System...
Jan 14 06:08:25 the-one systemd[1]: Mounting POSIX Message Queue File System...
Jan 14 06:08:25 the-one systemd[1]: Starting Journal Service...
Jan 14 06:08:25 the-one systemd[1]: Started Collect Read-Ahead Data.
Jan 14 06:08:25 the-one systemd[1]: Started Replay Read-Ahead Data.
Jan 14 06:08:25 the-one systemd[1]: Started Create list of required static device nodes for the current kernel.
Jan 14 06:08:25 the-one kernel: EXT4-fs (sda2): re-mounted. Opts: data=ordered
Jan 14 06:08:25 the-one systemd[1]: Started Remount Root and Kernel File Systems.
Jan 14 06:08:25 the-one systemd[1]: Starting udev Coldplug all Devices...
Jan 14 06:08:25 the-one systemd[1]: Activating swap /swap...
Jan 14 06:08:25 the-one systemd[1]: Starting Create Static Device Nodes in /dev...
Jan 14 06:08:25 the-one systemd[1]: Starting Load/Save Random Seed...
Jan 14 06:08:25 the-one systemd[1]: Mounted Huge Pages File System.
Jan 14 06:08:25 the-one systemd[1]: Mounted Configuration File System.
Jan 14 06:08:25 the-one systemd[1]: Mounted POSIX Message Queue File System.
Jan 14 06:08:25 the-one systemd[1]: Mounted Debug File System.
Jan 14 06:08:25 the-one systemd[1]: Mounted Temporary Directory.
Jan 14 06:08:25 the-one systemd[1]: Started Setup Virtual Console.
Jan 14 06:08:25 the-one systemd[1]: Started Apply Kernel Variables.
Jan 14 06:08:25 the-one systemd[1]: Started Load/Save Random Seed.
Jan 14 06:08:25 the-one systemd[1]: Started udev Coldplug all Devices.
Jan 14 06:08:25 the-one systemd[1]: Started Create Static Device Nodes in /dev.
Jan 14 06:08:25 the-one systemd[1]: Reached target Local File Systems (Pre).
Jan 14 06:08:25 the-one systemd[1]: Starting udev Kernel Device Manager...
Jan 14 06:08:25 the-one kernel: Adding 2097148k swap on /swap.  Priority:-1 extents:2 across:2228220k FS
Jan 14 06:08:25 the-one systemd[1]: Activated swap /swap.
Jan 14 06:08:25 the-one systemd[1]: Reached target Swap.
Jan 14 06:08:25 the-one systemd[1]: Started udev Kernel Device Manager.
Jan 14 06:08:25 the-one kernel: i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
Jan 14 06:08:25 the-one kernel: ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150818/utaddress-254)
Jan 14 06:08:25 the-one kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jan 14 06:08:25 the-one kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Jan 14 06:08:25 the-one kernel: ACPI: Power Button [PWRB]
Jan 14 06:08:25 the-one kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Jan 14 06:08:25 the-one kernel: ACPI: Power Button [PWRF]
Jan 14 06:08:25 the-one kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 14 06:08:25 the-one systemd-journald[168]: Journal started
Jan 14 06:08:25 the-one systemd[1]: Started Journal Service.
Jan 14 06:08:25 the-one systemd[1]: Starting Flush Journal to Persistent Storage...
Jan 14 06:08:25 the-one kernel: ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150818/utaddress-254)
Jan 14 06:08:25 the-one kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jan 14 06:08:25 the-one kernel: ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150818/utaddress-254)
Jan 14 06:08:25 the-one kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jan 14 06:08:25 the-one kernel: ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150818/utaddress-254)
Jan 14 06:08:25 the-one kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jan 14 06:08:25 the-one kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000051F (\LED_) (20150818/utaddress-254)
Jan 14 06:08:25 the-one kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150818/utaddress-254)
Jan 14 06:08:25 the-one kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jan 14 06:08:25 the-one kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich

I'm really interested as to what caused this error? Any help would be great

Last edited by Cube777 (2016-01-14 13:28:14)

---

dotgit - A comprehensive solution to managing your dotfiles

mich41

Member

Registered: 2012-06-22

Posts: 796

Re: Random kernel panic - ACPI

What errors? You pasted some random fragment of syslog which doesn't seem to contain anything unusual at first glance. And certainly no panic messages, because those never get written to syslog - you have to take a pic of the screen when they appear.

Cube777

Member

Registered: 2015-09-15

Posts: 45

Website

Re: Random kernel panic - ACPI

Sorry I should've mentioned at the end of the log there is a bunch of ACPI errors that I don't have when running journalctl -b on a normal boot, so I assume this is where the error occurred as the log stops right after them

---

dotgit - A comprehensive solution to managing your dotfiles

mich41

Member

Registered: 2012-06-22

Posts: 796

Re: Random kernel panic - ACPI

You mean these "ACPI Warning: SystemIO ... conflicts with..."? They are harmless and present on almost every system, search the forum if in doubt.