Arch Linux

Giorgio Spenza

Member

Registered: 2013-10-08

Posts: 3

Toshiba P50-B Keyboard and mouse not working on xorg randomly

Hello! I have a toshiba satellite p50-b-103 and i have been experiencing some problems with my keyboard and touchpad using Xorg, when I boot they freeze and I can't make them work. Everything is detected in console mode, also, when I boot with nolapic everything, even Xorg, works fine, it detects my keyboard and mouse and everything is ok (but sometimes, very randomly it fails).

Here is the output of doing a cat to /proc/bus/input/devices (with everyting working):

I: Bus=0011 Vendor=0001 Product=0001 Version=ab83
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd leds event0 
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
U: Uniq=
H: Handlers=event1 
B: PROP=0
B: EV=21
B: SW=1

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
U: Uniq=
H: Handlers=kbd event2 
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
U: Uniq=
H: Handlers=kbd event3 
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0003 Vendor=13d3 Product=5652 Version=1125
N: Name="TOSHIBA Web Camera - HD"
P: Phys=usb-0000:00:14.0-10/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input8
U: Uniq=
H: Handlers=kbd event4 
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card1/input9
U: Uniq=
H: Handlers=event5 
B: PROP=0
B: EV=21
B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10
U: Uniq=
H: Handlers=event6 
B: PROP=0
B: EV=21
B: SW=4

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
U: Uniq=
H: Handlers=kbd event7 
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:66/LNXVIDEO:01/input/input12
U: Uniq=
H: Handlers=kbd event8 
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel HDMI HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.0/sound/card0/input15
U: Uniq=
H: Handlers=event9 
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel HDMI HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.0/sound/card0/input16
U: Uniq=
H: Handlers=event10 
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel HDMI HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.0/sound/card0/input17
U: Uniq=
H: Handlers=event11 
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input18
U: Uniq=
H: Handlers=kbd event12 
B: PROP=0
B: EV=40001
B: SND=6

I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input20
U: Uniq=
H: Handlers=event13 mouse0 
B: PROP=5
B: EV=b
B: KEY=e520 10000 0 0 0 0
B: ABS=660800011000003

When I run with nolapic, sensors and every tool related to cpu only detects one core of my cuad-core i7. I was wondering if its a option to force evdev to detect my devices and that way i wouldn't have to use nolapic.

Thank you very much for your coperation in advance.

There is my grub booting line:

cryptdevice=crypt_device root=mapped_root resume=mapped_swap iommu=soft nolapic pci=assign-busses apicmaintimer idle=poll reboot=cold,hard quiet"