You are not logged in.

#1 2006-02-14 11:48:12

vilwarin
Member
Registered: 2005-10-20
Posts: 28

corrupt superblock? unable to boot

Heya!

Here's what I did yesterday before turning off my computer:
pacman -Syu wink
(there was a kernel update, if I remeber correctly)

Now I am screwed, Arch Linux won't boot anymore and gives me this:

checking filesystems                                  [busy] 

fsck.ext3: no such file or directory while trying to open /dev/discs/disc0/part5 

/dev/discs/disc0/part5: 
the superblock could not be read or does not describe a correct ext2 filesystems. if the device is valid and it really contains an ext2 filesystem (can not swap or ufs or something else) then the suprerblock is corrupt and you might try running e2fsck with and alternate superblock.

perfect sad

What I tried:

I searched google for this problem and found that a proper strategy is to boot with a rescue disc and try to fix it with fsck.ext3 (resp. 2)

as suggested I booted with a rescue disc (grml 0.4) and entered:

 fsck.ext3 -c /dev/hda5

This is what I got:

/dev/hda5 293903/4823840 files (4.5% non-contageous), 6844769/9636984 blocks

fsck.ext3 -c /dev/hda5 2.82s user 14.08s system 1% cpu 19:26.28 total

I don't now how to interpret this result, but those 4.5% non contageous sound dangerous enough sad.

Here's some aditional info, that might come in handy:

fstab:

# 
# /etc/fstab: static file system information
#
# <file system>        <dir>         <type>    <options>          <dump> <pass>
none                   /proc         proc      defaults            0      0
none                   /dev/pts      devpts    defaults            0      0
none                   /dev/shm      tmpfs     defaults            0      0
tmpfs                  /tmp          tmpfs     defaults            0      0
#sysfs                  /sys          sysfs     defaults            0      0
usbfs               /proc/bus/usb usbfs  defaults            0      0


# windows partitions
/dev/hda1    /mnt/win    ntfs    ro,gid=100,umask=007    0    0
/dev/hdb1    /mnt/spiele    ntfs    ro,gid=100,umask=007    0    0
/dev/hdb5    /mnt/storage    ntfs    ro,gid=100,umask=007    0    0

# removable media
/dev/cdroms/cdrom1     /mnt/cd   iso9660   ro,user,noauto,unhide   0      0
/dev/cdroms/cdrom1     /mnt/dvd  udf       ro,user,noauto,unhide   0      0
/dev/floppy/0          /mnt/fl   vfat      user,noauto 0      0
/dev/sda1              /mnt/usbstick vfat  user,noauto 0 0

#
/dev/discs/disc0/part6 swap swap defaults 0 0
/dev/discs/disc0/part5 / ext3 defaults 0 1

and my grub menu.lst

# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst

# DEVICE NAME CONVERSIONS 
#
#  Old /dev    DevFS                    Grub
# -----------------------------------------------
#  /dev/fd0    /dev/floppy/0            (fd0)
#  /dev/hda    /dev/discs/disc0/disc    (hd0)
#  /dev/hdb2   /dev/discs/disc1/part2   (hd1,1)
#  /dev/hda3   /dev/discs/disc0/part3   (hd0,2)
#

#  FRAMEBUFFER RESOLUTION SETTINGS
#     +----------------------------------------+
#          | 640x480 800x600 1024x768 1280x1024
#      ----+-----------------------------------
#      256 |   0x301   0x303    0x305     0x307
#      32K |   0x310   0x313    0x316     0x319
#      64K |   0x311   0x314    0x317     0x31A
#      16M |   0x312   0x315    0x318     0x31B
#     +----------------------------------------+

# general configuration:
timeout   5
default  0 
color light-blue/black light-cyan/blue

# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#-*

# (0) Arch Linux

title  Arch Linux  [/boot/vmlinuz26-2.6.13]
root   (hd0,4)
kernel /boot/vmlinuz-2.6.13 root=/dev/hda5 ro devfs=nomount

title Arch Linux [/boot/vmlinuz26archck]
root (hd0,4)
kernel /boot/vmlinuz26archck root=/dev/hda5 ro devfs=nomount

title  Arch Linux  [/boot/vmlinuz26]
root   (hd0,4)
kernel /boot/vmlinuz26 root=/dev/discs/disc0/part5 ro devfs=nomount

title  Windows XP
root   (hd0,0)
chainloader +1

the other two Arch Linux kernels do not work anymore, I just did not yet remove them from grub (first kept them as backup).

Ok, I hope I do not need to reinstall Arch Linux and this problem can somehow be solved.
Thanks for your time and thoughts smile
If there's any other info you need about my system, just ask.
Ah yes, right now I booted the Windows partition you see in the grub menu.lst, it is on the same HDD, so I guess the HDD is working correctly.

Offline

#2 2006-02-14 12:09:49

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: corrupt superblock? unable to boot

With the latest kernel, you can no longer use devfs device name formats i.e. /dev/discs/disc0/part5. Change it /dev/hda5 and you should be fine.

This information would have been displayed on your screen following the kernel upgrade, and is also available in the Announcements forum, and on the ArchLinux website News page.

Offline

#3 2006-02-14 12:15:37

vilwarin
Member
Registered: 2005-10-20
Posts: 28

Re: corrupt superblock? unable to boot

Hey tomk,

I just copied my menu.lst here.
The second and third Arch entries are old ones, that I simply did not remove and which do not work or do anything useful.
If you do a second look at my post, you will see that the first Arch bootentry correctly containes /dev/hda5

wink

Offline

#4 2006-02-14 12:58:56

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: corrupt superblock? unable to boot

Sorry - I ignored the first two menu entries because only the third one tries to boot vmlinuz26, the kernel provided by the stock kernel package. Looking at it again, though, I have to ask - how long since your last update? The stock kernel migrated to initrd in mid-December, but I don't see any initrd lines in your grub setup. Have a look on the News page for the initrd piece on 16 Dec, and everything posted since then.

Back to your immediate problem. The first grub menu entry will only work if you still have a kernel called vmlinuz-2.6.13 in your boot directory. This is a non-standard name as far as Arch is concerned, so the kernel upgrade would not have affected it. That's not all though - you also need to get rid of the devfs stuff in /etc/fstab. Try a reboot after that. If it still doesn't work, downgrade udev to to 079 or 078. If pacman doesn't have these versions cached, I have them here.

Let me know how it goes, and sorry again for not paying attention earlier.

Offline

#5 2006-02-14 13:04:23

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: corrupt superblock? unable to boot

I should probably add that the above should be regarded as a rescue suggestion, so that you can boot your system, and then get it back to a normal, up-to-date configuration.

Offline

#6 2006-02-14 13:35:42

_Gandalf_
Member
Registered: 2006-01-12
Posts: 735

Re: corrupt superblock? unable to boot

also tomk was talking about fstab, dont forget to change fstab, your filesystem check failed simply because there is no such device...

Offline

#7 2006-02-16 11:04:01

gnud
Member
Registered: 2005-11-27
Posts: 182

Re: corrupt superblock? unable to boot

Gandalf is right.
I had the same problem, fixed it by fixing fstab.

I don't get how this problem pops up now, though. I've been using udev for ages.

Offline

#8 2006-02-16 18:08:19

Snowman
Developer/Forum Fellow
From: Montreal, Canada
Registered: 2004-08-20
Posts: 5,212

Re: corrupt superblock? unable to boot

gnud wrote:

Gandalf is right.
I had the same problem, fixed it by fixing fstab.

I don't get how this problem pops up now, though. I've been using udev for ages.

That's because older versions of udev were providing symlinks (perhaps to help with the transition devfs -> udev) so the devfs scheme was still working. The new udev doesn't create the symlinks anymore. There could be other reasons too as udev is currently changing quite rapidely.

Offline

#9 2006-02-17 10:09:13

vilwarin
Member
Registered: 2005-10-20
Posts: 28

Re: corrupt superblock? unable to boot

I had exams till yestereve, so I let the problem on ice till today.

Well I changed

/dev/discs/disc0/part6 swap swap defaults 0 0
/dev/discs/disc0/part5 / ext3 defaults 0 1

to

/dev/hda6 swap swap defaults 0 0
/dev/hda5 / ext3 defaults 0 1

same errpr just with /dev/hda5 instead of /dev/discs/disc0/part5

I will try to compile and use another kernel and thentell you the results

michi

Offline

#10 2006-02-17 12:58:05

vilwarin
Member
Registered: 2005-10-20
Posts: 28

Re: corrupt superblock? unable to boot

okay,

I /usr/src compiled the 2.6.15 stock kernel and it solved the problem, while procuring all the problems I fixed with the custom-kernel I had.

before I compiled the bzimage, I searched the Makefile for SMP and PREEMPT, because I know that these enabled cause my wirless network adapter to cease functioning. But I couldn't find these two options anymore and thus could not disable them.
Any Ideas where they are hiding with the 15 Kernel?

Also alsa doesn't work again, I hope I can remeber how I fixed that last time wink

Anyway thank you for your ideas
michael

Offline

#11 2006-04-28 23:06:57

alexthelion
Member
From: Switzerland
Registered: 2004-03-06
Posts: 117

Re: corrupt superblock? unable to boot

I did a pacman -Syu yesterday and now I have this same error. Is something wrong with the latest kernel?

Offline

#12 2006-04-29 07:56:01

alexthelion
Member
From: Switzerland
Registered: 2004-03-06
Posts: 117

Re: corrupt superblock? unable to boot

OK, some more info on that. So, at basically every boot process, I get this error message about my root file system being corrupted (superblock could not be read). Until now, I always got it to work by using fsck.ext3. fsck does something, reboot and all works fine.

However, if I shutdown the system, the problem start all over again. How can I durably repair this file system?

Offline

#13 2006-04-29 22:16:37

BroodingDogma
Member
Registered: 2005-03-31
Posts: 13

Re: corrupt superblock? unable to boot

I am in the same boat with axethelion.  After upgrading I get the superblock error.  I'm not really concerned about being able to reboot and all that jazz.  I just want to be able to access the drive to more my most important data off.  Then I'm going to do a clean wipe and fresh install.  Any help would be appreciated.

Offline

#14 2006-05-02 11:28:48

alexthelion
Member
From: Switzerland
Registered: 2004-03-06
Posts: 117

Re: corrupt superblock? unable to boot

Just wonder why this suddenly happens...? A thought: beagle crashed on me several times lately, is it possible that it screwed something up by using XATTR? Maybe a bug in the XATTR implementation in the latest kernel or the like?

Offline

#15 2006-05-03 20:31:33

alexthelion
Member
From: Switzerland
Registered: 2004-03-06
Posts: 117

Re: corrupt superblock? unable to boot

I was btw always using stock kernel.

Offline

Board footer

Powered by FluxBB