You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2016-02-11 03:56:18
- gkumar7
- Member
- Registered: 2016-02-11
- Posts: 4
Touchpad recently stopped working [SOLVED]
The cursor shows up in libinput
Device: DLL06FE:00 04F3:300F Touchpad
Kernel: /dev/input/event8
Group: 9
Seat: seat0, default
Size: 103.42x62.55mm
Capabilities: pointer
Tap-to-click: disabled
Tap drag lock: disabled
Left-handed: disabled
Nat.scrolling: disabled
Middle emulation: n/a
Calibration: n/a
Scroll methods: *two-finger edge
Click methods: *button-areas clickfinger
Disable-w-typing: enabled
Accel profiles: none
I have looked over other similar issues in the archlinux form, but most of their solutions were related to a disabled touchpad. I am sure that my touchpad is enabled as can be seen above, but the cursor does not move.
This issue recently manifested after a system update two days ago.
Last edited by gkumar7 (2016-02-16 00:47:51)
Offline
#2 2016-02-11 05:15:12
- x33a
- Forum Fellow
- Registered: 2009-08-15
- Posts: 4,587
Re: Touchpad recently stopped working [SOLVED]
And which Desktop Environment do you happen to be using?
Offline
#3 2016-02-11 15:38:02
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 19,793
Re: Touchpad recently stopped working [SOLVED]
Welcome to Arch Linux.
Can you find you Xorg log file and post it (using BBCode code tags).
Depending on how you start X, it will be in /var/log/Xorg.0.log, ~/.local/share/xorg/Xorg.0.log, or could just be in the journal.
Then, let's see if it is working. When you posted the above, it was at /dev/input/event8. Assuming it is still there (you have not rebooted) try
%sudo od -x /dev/input/event8
Then touch the touchpad and see if it spews forth a bunch of hexadecimal data as you move your finger.
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
#4 2016-02-13 03:59:20
- gkumar7
- Member
- Registered: 2016-02-11
- Posts: 4
Re: Touchpad recently stopped working [SOLVED]
Here are the contents of /var/log/Xorg.0.log. Also, no data is displayed when listening for input from the touchpad.
By the way, regarding the desktop environment, I am using gnome.
[ 4.065]
X.Org X Server 1.18.1
Release Date: 2016-02-08
[ 4.065] X Protocol Version 11, Revision 0
[ 4.065] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 4.065] Current Operating System: Linux kumar 4.4.1-2-ARCH #1 SMP PREEMPT Wed Feb 3 13:12:33 UTC 2016 x86_64
[ 4.065] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6a0dbb22-006e-49d4-b8c9-4406c5016e5f rw resume=UUID=eebe0775-456b-42e5-86bf-2aefa7b8cd72 quiet
[ 4.065] Build Date: 11 February 2016 09:57:03AM
[ 4.065]
[ 4.065] Current version of pixman: 0.34.0
[ 4.065] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.065] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.066] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 12 21:51:33 2016
[ 4.085] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.085] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.087] (==) No Layout section. Using the first Screen section.
[ 4.087] (==) No screen section available. Using defaults.
[ 4.087] (**) |-->Screen "Default Screen Section" (0)
[ 4.087] (**) | |-->Monitor "<default monitor>"
[ 4.089] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.089] (**) Option "DontZap" "false"
[ 4.089] (==) Automatically adding devices
[ 4.089] (==) Automatically enabling devices
[ 4.089] (==) Automatically adding GPU devices
[ 4.089] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.108] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4.108] Entry deleted from font path.
[ 4.108] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4.109] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4.109] Entry deleted from font path.
[ 4.109] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4.109] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 4.109] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.109] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.109] (II) Loader magic: 0x81ad60
[ 4.109] (II) Module ABI versions:
[ 4.109] X.Org ANSI C Emulation: 0.4
[ 4.109] X.Org Video Driver: 20.0
[ 4.109] X.Org XInput driver : 22.1
[ 4.109] X.Org Server Extension : 9.0
[ 4.110] (++) using VT number 7
[ 4.110] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.111] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.114] (--) PCI:*(0:0:2:0) 8086:1916:1028:06fe rev 7, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64
[ 4.114] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.114] (II) LoadModule: "glx"
[ 4.114] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.159] (II) Module glx: vendor="X.Org Foundation"
[ 4.159] compiled for 1.18.1, module version = 1.0.0
[ 4.159] ABI class: X.Org Server Extension, version 9.0
[ 4.159] (==) AIGLX enabled
[ 4.159] (==) Matched intel as autoconfigured driver 0
[ 4.159] (==) Matched intel as autoconfigured driver 1
[ 4.159] (==) Matched modesetting as autoconfigured driver 2
[ 4.159] (==) Matched fbdev as autoconfigured driver 3
[ 4.159] (==) Matched vesa as autoconfigured driver 4
[ 4.159] (==) Assigned the driver to the xf86ConfigLayout
[ 4.159] (II) LoadModule: "intel"
[ 4.164] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4.170] (II) Module intel: vendor="X.Org Foundation"
[ 4.170] compiled for 1.18.0, module version = 2.99.917
[ 4.170] Module class: X.Org Video Driver
[ 4.170] ABI class: X.Org Video Driver, version 20.0
[ 4.170] (II) LoadModule: "modesetting"
[ 4.171] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.173] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.173] compiled for 1.18.1, module version = 1.18.1
[ 4.173] Module class: X.Org Video Driver
[ 4.173] ABI class: X.Org Video Driver, version 20.0
[ 4.173] (II) LoadModule: "fbdev"
[ 4.173] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4.174] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.174] compiled for 1.18.0, module version = 0.4.4
[ 4.174] Module class: X.Org Video Driver
[ 4.175] ABI class: X.Org Video Driver, version 20.0
[ 4.175] (II) LoadModule: "vesa"
[ 4.176] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.182] (II) Module vesa: vendor="X.Org Foundation"
[ 4.182] compiled for 1.18.0, module version = 2.3.4
[ 4.182] Module class: X.Org Video Driver
[ 4.182] ABI class: X.Org Video Driver, version 20.0
[ 4.182] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4.183] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 4.183] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 4.183] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 4.183] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.183] (II) FBDEV: driver for framebuffer: fbdev
[ 4.183] (II) VESA: driver for VESA chipsets: vesa
[ 4.204] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 4.204] (II) intel(0): SNA compiled from 2.99.917-519-g8229390
[ 4.206] (WW) Falling back to old probe method for modesetting
[ 4.206] (WW) Falling back to old probe method for fbdev
[ 4.206] (II) Loading sub module "fbdevhw"
[ 4.206] (II) LoadModule: "fbdevhw"
[ 4.206] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4.207] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.207] compiled for 1.18.1, module version = 0.0.2
[ 4.207] ABI class: X.Org Video Driver, version 20.0
[ 4.207] (WW) Falling back to old probe method for vesa
[ 4.208] (--) intel(0): gen9 engineering sample
[ 4.208] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 4.208] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.209] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4.209] (==) intel(0): RGB weight 888
[ 4.209] (==) intel(0): Default visual is TrueColor
[ 4.210] (II) intel(0): Output eDP1 has no monitor section
[ 4.230] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 4.230] (II) intel(0): Enabled output eDP1
[ 4.230] (II) intel(0): Output HDMI1 has no monitor section
[ 4.230] (II) intel(0): Enabled output HDMI1
[ 4.230] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 4.230] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 4.230] (II) intel(0): Enabled output VIRTUAL1
[ 4.230] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 4.230] (==) intel(0): TearFree disabled
[ 4.230] (==) intel(0): DPI set to (96, 96)
[ 4.230] (II) Loading sub module "dri2"
[ 4.230] (II) LoadModule: "dri2"
[ 4.230] (II) Module "dri2" already built-in
[ 4.230] (II) Loading sub module "present"
[ 4.230] (II) LoadModule: "present"
[ 4.230] (II) Module "present" already built-in
[ 4.231] (II) UnloadModule: "modesetting"
[ 4.231] (II) Unloading modesetting
[ 4.231] (II) UnloadModule: "fbdev"
[ 4.231] (II) Unloading fbdev
[ 4.231] (II) UnloadSubModule: "fbdevhw"
[ 4.231] (II) Unloading fbdevhw
[ 4.231] (II) UnloadModule: "vesa"
[ 4.231] (II) Unloading vesa
[ 4.231] (==) Depth 24 pixmap format is 32 bpp
[ 4.235] (II) intel(0): SNA initialized with generic backend
[ 4.235] (==) intel(0): Backing store enabled
[ 4.235] (==) intel(0): Silken mouse enabled
[ 4.237] (II) intel(0): HW Cursor enabled
[ 4.237] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4.239] (==) intel(0): DPMS enabled
[ 4.239] (==) intel(0): Display hotplug detection enabled
[ 4.240] (II) intel(0): Textured video not supported on this hardware or backend
[ 4.240] (II) intel(0): [DRI2] Setup complete
[ 4.240] (II) intel(0): [DRI2] DRI driver: i965
[ 4.240] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 4.240] (II) intel(0): direct rendering: DRI2 enabled
[ 4.240] (II) intel(0): hardware support for Present enabled
[ 4.240] (--) RandR disabled
[ 4.302] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4.302] (II) AIGLX: enabled GLX_ARB_create_context
[ 4.302] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4.302] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 4.302] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4.302] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4.302] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 4.302] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 4.302] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4.302] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 4.303] (II) AIGLX: Loaded and initialized i965
[ 4.303] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.310] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 4.311] (II) intel(0): Setting screen physical size to 508 x 285
[ 4.400] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 4.400] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.400] (**) Power Button: Applying InputClass "system-keyboard"
[ 4.400] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 4.400] (II) LoadModule: "evdev"
[ 4.400] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4.402] (II) Module evdev: vendor="X.Org Foundation"
[ 4.402] compiled for 1.18.0, module version = 2.10.1
[ 4.402] Module class: X.Org XInput Driver
[ 4.402] ABI class: X.Org XInput driver, version 22.1
[ 4.402] (II) Using input driver 'evdev' for 'Power Button'
[ 4.402] (**) Power Button: always reports core events
[ 4.402] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 4.402] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.402] (--) evdev: Power Button: Found keys
[ 4.402] (II) evdev: Power Button: Configuring as keyboard
[ 4.402] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 4.402] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.402] (**) Option "xkb_rules" "evdev"
[ 4.402] (**) Option "xkb_layout" "us"
[ 4.402] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.416] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 4.416] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4.416] (**) Video Bus: Applying InputClass "system-keyboard"
[ 4.416] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 4.416] (II) Using input driver 'evdev' for 'Video Bus'
[ 4.416] (**) Video Bus: always reports core events
[ 4.416] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 4.416] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4.416] (--) evdev: Video Bus: Found keys
[ 4.416] (II) evdev: Video Bus: Configuring as keyboard
[ 4.416] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[ 4.416] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4.416] (**) Option "xkb_rules" "evdev"
[ 4.416] (**) Option "xkb_layout" "us"
[ 4.416] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.416] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4.416] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.416] (**) Power Button: Applying InputClass "system-keyboard"
[ 4.416] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 4.416] (II) Using input driver 'evdev' for 'Power Button'
[ 4.416] (**) Power Button: always reports core events
[ 4.416] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 4.416] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.416] (--) evdev: Power Button: Found keys
[ 4.416] (II) evdev: Power Button: Configuring as keyboard
[ 4.416] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 4.416] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 4.416] (**) Option "xkb_rules" "evdev"
[ 4.416] (**) Option "xkb_layout" "us"
[ 4.416] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.417] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 4.417] (II) No input driver specified, ignoring this device.
[ 4.417] (II) This device may have been added with another device file.
[ 4.417] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 4.417] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4.417] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 4.417] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 4.417] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4.417] (**) Sleep Button: always reports core events
[ 4.417] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 4.417] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4.417] (--) evdev: Sleep Button: Found keys
[ 4.417] (II) evdev: Sleep Button: Configuring as keyboard
[ 4.417] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 4.417] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 4.417] (**) Option "xkb_rules" "evdev"
[ 4.417] (**) Option "xkb_layout" "us"
[ 4.417] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.418] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.1 (/dev/input/event16)
[ 4.418] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "evdev keyboard catchall"
[ 4.418] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "system-keyboard"
[ 4.418] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "Keyboard Defaults"
[ 4.418] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.1'
[ 4.418] (**) Microsoft Microsoft® Nano Transceiver v2.1: always reports core events
[ 4.418] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Device: "/dev/input/event16"
[ 4.418] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Vendor 0x45e Product 0x7a5
[ 4.418] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found keys
[ 4.418] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Configuring as keyboard
[ 4.418] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:045E:07A5.0001/input/input19/event16"
[ 4.418] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.1" (type: KEYBOARD, id 10)
[ 4.418] (**) Option "xkb_rules" "evdev"
[ 4.418] (**) Option "xkb_layout" "us"
[ 4.418] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.418] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.1 (/dev/input/event17)
[ 4.418] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "evdev pointer catchall"
[ 4.418] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.1'
[ 4.418] (**) Microsoft Microsoft® Nano Transceiver v2.1: always reports core events
[ 4.418] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Device: "/dev/input/event17"
[ 4.470] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Vendor 0x45e Product 0x7a5
[ 4.470] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found 9 mouse buttons
[ 4.470] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found scroll wheel(s)
[ 4.470] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found relative axes
[ 4.470] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found x and y relative axes
[ 4.470] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Configuring as mouse
[ 4.470] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Adding scrollwheel support
[ 4.470] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: YAxisMapping: buttons 4 and 5
[ 4.470] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.470] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:045E:07A5.0002/input/input20/event17"
[ 4.470] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.1" (type: MOUSE, id 11)
[ 4.470] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: initialized for relative axes.
[ 4.471] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) keeping acceleration scheme 1
[ 4.471] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) acceleration profile 0
[ 4.471] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) acceleration factor: 2.000
[ 4.471] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) acceleration threshold: 4
[ 4.472] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.1 (/dev/input/mouse2)
[ 4.472] (II) No input driver specified, ignoring this device.
[ 4.472] (II) This device may have been added with another device file.
[ 4.474] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.1 (/dev/input/event18)
[ 4.474] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "evdev keyboard catchall"
[ 4.474] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "system-keyboard"
[ 4.474] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "Keyboard Defaults"
[ 4.474] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.1'
[ 4.474] (**) Microsoft Microsoft® Nano Transceiver v2.1: always reports core events
[ 4.474] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Device: "/dev/input/event18"
[ 4.474] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Vendor 0x45e Product 0x7a5
[ 4.474] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found 1 mouse buttons
[ 4.474] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found scroll wheel(s)
[ 4.474] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found relative axes
[ 4.474] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found absolute axes
[ 4.474] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found absolute multitouch axes
[ 4.474] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Fake MT device detected
[ 4.475] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found x and y absolute axes
[ 4.475] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Found keys
[ 4.475] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Forcing relative x/y axes to exist.
[ 4.475] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Configuring as mouse
[ 4.475] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Configuring as keyboard
[ 4.475] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: Adding scrollwheel support
[ 4.475] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: YAxisMapping: buttons 4 and 5
[ 4.475] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.475] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:045E:07A5.0003/input/input21/event18"
[ 4.475] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.1" (type: KEYBOARD, id 12)
[ 4.475] (**) Option "xkb_rules" "evdev"
[ 4.475] (**) Option "xkb_layout" "us"
[ 4.475] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.475] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.1: initialized for relative axes.
[ 4.475] (WW) evdev: Microsoft Microsoft® Nano Transceiver v2.1: ignoring absolute axes.
[ 4.476] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) keeping acceleration scheme 1
[ 4.476] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) acceleration profile 0
[ 4.476] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) acceleration factor: 2.000
[ 4.476] (**) Microsoft Microsoft® Nano Transceiver v2.1: (accel) acceleration threshold: 4
[ 4.478] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.1 (/dev/input/js0)
[ 4.478] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "system-keyboard"
[ 4.478] (**) Microsoft Microsoft® Nano Transceiver v2.1: Applying InputClass "Keyboard Defaults"
[ 4.478] (II) No input driver specified, ignoring this device.
[ 4.478] (II) This device may have been added with another device file.
[ 4.480] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 (/dev/input/event20)
[ 4.480] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: Applying InputClass "evdev pointer catchall"
[ 4.480] (II) Using input driver 'evdev' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00'
[ 4.480] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: always reports core events
[ 4.480] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Device: "/dev/input/event20"
[ 4.533] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Vendor 0x45e Product 0xe1
[ 4.533] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found 9 mouse buttons
[ 4.533] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found scroll wheel(s)
[ 4.533] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found relative axes
[ 4.533] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found x and y relative axes
[ 4.533] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Configuring as mouse
[ 4.533] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Adding scrollwheel support
[ 4.533] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: YAxisMapping: buttons 4 and 5
[ 4.533] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.534] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:00E1.0004/input/input23/event20"
[ 4.534] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00" (type: MOUSE, id 13)
[ 4.534] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: initialized for relative axes.
[ 4.534] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) keeping acceleration scheme 1
[ 4.534] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration profile 0
[ 4.534] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration factor: 2.000
[ 4.534] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration threshold: 4
[ 4.536] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 (/dev/input/mouse3)
[ 4.536] (II) No input driver specified, ignoring this device.
[ 4.536] (II) This device may have been added with another device file.
[ 4.538] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event19)
[ 4.538] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 4.538] (**) Integrated_Webcam_HD: Applying InputClass "system-keyboard"
[ 4.538] (**) Integrated_Webcam_HD: Applying InputClass "Keyboard Defaults"
[ 4.538] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[ 4.538] (**) Integrated_Webcam_HD: always reports core events
[ 4.538] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event19"
[ 4.538] (--) evdev: Integrated_Webcam_HD: Vendor 0x1bcf Product 0x28aa
[ 4.538] (--) evdev: Integrated_Webcam_HD: Found keys
[ 4.538] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[ 4.538] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input22/event19"
[ 4.538] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 14)
[ 4.538] (**) Option "xkb_rules" "evdev"
[ 4.538] (**) Option "xkb_layout" "us"
[ 4.539] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.541] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event15)
[ 4.541] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 4.541] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 4.541] (**) ELAN Touchscreen: always reports core events
[ 4.541] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event15"
[ 4.542] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x228b
[ 4.542] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 4.542] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 4.542] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 4.542] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 4.542] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 4.542] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 4.542] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 4.542] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:228B.0007/input/input17/event15"
[ 4.542] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 15)
[ 4.542] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 4.542] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 4.542] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 4.542] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 4.543] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 4.544] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[ 4.544] (II) No input driver specified, ignoring this device.
[ 4.544] (II) This device may have been added with another device file.
[ 4.546] (II) config/udev: Adding input device DLL06FE:00 04F3:300F Touchpad (/dev/input/event8)
[ 4.546] (**) DLL06FE:00 04F3:300F Touchpad: Applying InputClass "evdev touchpad catchall"
[ 4.546] (**) DLL06FE:00 04F3:300F Touchpad: Applying InputClass "touchpad catchall"
[ 4.546] (**) DLL06FE:00 04F3:300F Touchpad: Applying InputClass "Default clickpad buttons"
[ 4.546] (**) DLL06FE:00 04F3:300F Touchpad: Applying InputClass "touchpad catchall"
[ 4.546] (**) DLL06FE:00 04F3:300F Touchpad: Applying InputClass "Default clickpad buttons"
[ 4.546] (II) LoadModule: "synaptics"
[ 4.547] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4.548] (II) Module synaptics: vendor="X.Org Foundation"
[ 4.548] compiled for 1.18.0, module version = 1.8.3
[ 4.548] Module class: X.Org XInput Driver
[ 4.548] ABI class: X.Org XInput driver, version 22.1
[ 4.548] (II) Using input driver 'synaptics' for 'DLL06FE:00 04F3:300F Touchpad'
[ 4.548] (**) DLL06FE:00 04F3:300F Touchpad: always reports core events
[ 4.548] (**) Option "Device" "/dev/input/event8"
[ 4.624] (II) synaptics: DLL06FE:00 04F3:300F Touchpad: found clickpad property
[ 4.624] (--) synaptics: DLL06FE:00 04F3:300F Touchpad: x-axis range 0 - 3206 (res 31)
[ 4.624] (--) synaptics: DLL06FE:00 04F3:300F Touchpad: y-axis range 0 - 1939 (res 31)
[ 4.624] (II) synaptics: DLL06FE:00 04F3:300F Touchpad: device does not report pressure, will use touch data.
[ 4.624] (II) synaptics: DLL06FE:00 04F3:300F Touchpad: device does not report finger width.
[ 4.624] (--) synaptics: DLL06FE:00 04F3:300F Touchpad: buttons: left double triple
[ 4.624] (--) synaptics: DLL06FE:00 04F3:300F Touchpad: Vendor 0x4f3 Product 0x300f
[ 4.624] (--) synaptics: DLL06FE:00 04F3:300F Touchpad: invalid pressure range. defaulting to 0 - 255
[ 4.624] (--) synaptics: DLL06FE:00 04F3:300F Touchpad: invalid finger width range. defaulting to 0 - 15
[ 4.624] (**) Option "TapButton1" "1"
[ 4.624] (**) Option "TapButton2" "2"
[ 4.624] (**) Option "TapButton3" "3"
[ 4.624] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 4.624] (--) synaptics: DLL06FE:00 04F3:300F Touchpad: touchpad found
[ 4.624] (**) DLL06FE:00 04F3:300F Touchpad: always reports core events
[ 4.653] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-DLL06FE:00/0018:04F3:300F.0006/input/input10/event8"
[ 4.653] (II) XINPUT: Adding extended input device "DLL06FE:00 04F3:300F Touchpad" (type: TOUCHPAD, id 16)
[ 4.653] (**) synaptics: DLL06FE:00 04F3:300F Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 4.653] (**) synaptics: DLL06FE:00 04F3:300F Touchpad: (accel) MaxSpeed is now 1.75
[ 4.653] (**) synaptics: DLL06FE:00 04F3:300F Touchpad: (accel) AccelFactor is now 0.053
[ 4.654] (**) DLL06FE:00 04F3:300F Touchpad: (accel) keeping acceleration scheme 1
[ 4.654] (**) DLL06FE:00 04F3:300F Touchpad: (accel) acceleration profile 1
[ 4.654] (**) DLL06FE:00 04F3:300F Touchpad: (accel) acceleration factor: 2.000
[ 4.654] (**) DLL06FE:00 04F3:300F Touchpad: (accel) acceleration threshold: 4
[ 4.655] (--) synaptics: DLL06FE:00 04F3:300F Touchpad: touchpad found
[ 4.656] (II) config/udev: Adding input device DLL06FE:00 04F3:300F Touchpad (/dev/input/mouse0)
[ 4.656] (**) DLL06FE:00 04F3:300F Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 4.657] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 4.658] (II) No input driver specified, ignoring this device.
[ 4.658] (II) This device may have been added with another device file.
[ 4.659] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 4.659] (II) No input driver specified, ignoring this device.
[ 4.659] (II) This device may have been added with another device file.
[ 4.660] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 4.660] (II) No input driver specified, ignoring this device.
[ 4.660] (II) This device may have been added with another device file.
[ 4.661] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 4.661] (II) No input driver specified, ignoring this device.
[ 4.661] (II) This device may have been added with another device file.
[ 4.662] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 4.662] (II) No input driver specified, ignoring this device.
[ 4.662] (II) This device may have been added with another device file.
[ 4.663] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 4.663] (II) No input driver specified, ignoring this device.
[ 4.663] (II) This device may have been added with another device file.
[ 4.664] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4.665] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4.665] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 4.665] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 4.665] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4.665] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.665] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4.665] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4.665] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4.665] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4.665] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4.665] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[ 4.665] (**) Option "xkb_rules" "evdev"
[ 4.665] (**) Option "xkb_layout" "us"
[ 4.665] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.667] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 4.667] (II) No input driver specified, ignoring this device.
[ 4.667] (II) This device may have been added with another device file.
[ 4.669] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[ 4.669] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 4.669] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[ 4.669] (**) Dell WMI hotkeys: Applying InputClass "Keyboard Defaults"
[ 4.669] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 4.669] (**) Dell WMI hotkeys: always reports core events
[ 4.669] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event6"
[ 4.669] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 4.669] (--) evdev: Dell WMI hotkeys: Found keys
[ 4.669] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 4.669] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event6"
[ 4.669] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 18)
[ 4.669] (**) Option "xkb_rules" "evdev"
[ 4.669] (**) Option "xkb_layout" "us"
[ 4.669] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 6.231] (II) intel(0): EDID vendor "LGD", prod id 1185
[ 6.231] (II) intel(0): Printing DDC gathered Modelines:
[ 6.231] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[ 6.231] (II) intel(0): Modeline "1920x1080"x0.0 111.00 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (53.4 kHz e)
[ 10.472] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse4)
[ 10.472] (II) No input driver specified, ignoring this device.
[ 10.472] (II) This device may have been added with another device file.
[ 10.508] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event21)
[ 10.508] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 10.508] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 10.508] (**) PS/2 Generic Mouse: always reports core events
[ 10.508] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event21"
[ 10.508] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 10.509] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 10.509] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 10.509] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 10.509] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 10.509] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 10.509] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.509] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event21"
[ 10.509] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 19)
[ 10.509] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 10.509] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 10.510] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 10.510] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 10.510] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 18.698] (II) config/udev: removing device Microsoft Microsoft Wireless Optical Mouse® 1.00
[ 18.713] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Close
[ 18.713] (II) UnloadModule: "evdev"
[ 32.022] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 (/dev/input/mouse3)
[ 32.022] (II) No input driver specified, ignoring this device.
[ 32.022] (II) This device may have been added with another device file.
[ 32.100] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 (/dev/input/event20)
[ 32.101] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: Applying InputClass "evdev pointer catchall"
[ 32.101] (II) Using input driver 'evdev' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00'
[ 32.101] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: always reports core events
[ 32.101] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Device: "/dev/input/event20"
[ 32.153] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Vendor 0x45e Product 0xe1
[ 32.153] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found 9 mouse buttons
[ 32.153] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found scroll wheel(s)
[ 32.153] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found relative axes
[ 32.153] (--) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Found x and y relative axes
[ 32.153] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Configuring as mouse
[ 32.153] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: Adding scrollwheel support
[ 32.153] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: YAxisMapping: buttons 4 and 5
[ 32.153] (**) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.153] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:00E1.0008/input/input24/event20"
[ 32.153] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00" (type: MOUSE, id 13)
[ 32.154] (II) evdev: Microsoft Microsoft Wireless Optical Mouse® 1.00: initialized for relative axes.
[ 32.155] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) keeping acceleration scheme 1
[ 32.155] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration profile 0
[ 32.155] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration factor: 2.000
[ 32.155] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration threshold: 4Offline
#5 2016-02-16 00:24:50
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,373
Re: Touchpad recently stopped working [SOLVED]
Seems similar to https://bbs.archlinux.org/viewtopic.php?id=208463
Offline
#6 2016-02-16 00:45:57
- gkumar7
- Member
- Registered: 2016-02-11
- Posts: 4
Re: Touchpad recently stopped working [SOLVED]
Well, downgrading the kernel to 4.3.3 works. Thanks for the pointing out this thread!
Offline
Pages: 1