You are not logged in.

Pages: 1

#1 2016-02-22 11:30:19

gunzy83
Member
From: Brisbane, Austalia
Registered: 2013-10-14
Posts: 13

[Solved] Plasma 5 Broken After Last Update

Hi,

This is the first time I am posting with a major issue as I usually manage to work out things for myself but this time I am a bit stumped. After I updated yesterday on both my laptop and desktop (XPS13 l322x and i7 920 with Nvidia 660 respectively) Plasma desktop failed to load via SDDM showing a little box with the following test: 

Could not start kdeinit5. Check your installation.

There was no kernel update so I initially tried downgrading the xorg packages that were upgraded, then tried to downgrade Plasma desktop and so on and so forth but it has not helped.

Next I tried running plasma from xinitrc:

#!/bin/sh

if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
        [ -x "$f" ] && . "$f"
    done
    unset f
fi

exec startkde

Which resulted in the following output:

~/.local/share/xorg/Xorg.0.log:

[   634.824] 
X.Org X Server 1.18.1
Release Date: 2016-02-08
[   634.828] X Protocol Version 11, Revision 0
[   634.829] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[   634.830] Current Operating System: Linux marvin 4.4.1-2-ARCH #1 SMP PREEMPT Wed Feb 3 13:12:33 UTC 2016 x86_64
[   634.830] Kernel command line: \vmlinuz-linux root=/dev/mapper/vgssd-lvroot rw rootfstype=ext4 quiet ipv6.disable=1 initrd=\initramfs-linux.img
[   634.833] Build Date: 11 February 2016  09:57:03AM
[   634.834]  
[   634.835] Current version of pixman: 0.34.0
[   634.837] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   634.837] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   634.843] (==) Log file: "/home/gunzy/.local/share/xorg/Xorg.0.log", Time: Mon Feb 22 20:31:47 2016
[   634.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   634.845] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   634.846] (==) No Layout section.  Using the first Screen section.
[   634.846] (==) No screen section available. Using defaults.
[   634.846] (**) |-->Screen "Default Screen Section" (0)
[   634.846] (**) |   |-->Monitor "<default monitor>"
[   634.846] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   634.846] (**) |   |-->Device "Intel Graphics"
[   634.846] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   634.846] (==) Automatically adding devices
[   634.846] (==) Automatically enabling devices
[   634.846] (==) Automatically adding GPU devices
[   634.846] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   634.846] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   634.846] 	Entry deleted from font path.
[   634.846] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   634.846] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   634.846] 	Entry deleted from font path.
[   634.846] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   634.846] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[   634.846] (==) ModulePath set to "/usr/lib/xorg/modules"
[   634.846] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   634.846] (II) Loader magic: 0x81ad60
[   634.846] (II) Module ABI versions:
[   634.846] 	X.Org ANSI C Emulation: 0.4
[   634.846] 	X.Org Video Driver: 20.0
[   634.846] 	X.Org XInput driver : 22.1
[   634.846] 	X.Org Server Extension : 9.0
[   634.847] (++) using VT number 5

[   634.847] (--) controlling tty is VT number 5, auto-enabling KeepTty
[   634.848] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[   634.849] (II) xfree86: Adding drm device (/dev/dri/card0)
[   634.850] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[   634.851] (--) PCI:*(0:0:2:0) 8086:0166:1028:058b rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00002000/64
[   634.851] (II) Open ACPI successful (/var/run/acpid.socket)
[   634.851] (II) LoadModule: "glx"
[   634.851] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   634.852] (II) Module glx: vendor="X.Org Foundation"
[   634.852] 	compiled for 1.18.1, module version = 1.0.0
[   634.852] 	ABI class: X.Org Server Extension, version 9.0
[   634.852] (==) AIGLX enabled
[   634.852] (II) LoadModule: "intel"
[   634.852] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   634.852] (II) Module intel: vendor="X.Org Foundation"
[   634.852] 	compiled for 1.18.1, module version = 2.99.917
[   634.852] 	Module class: X.Org Video Driver
[   634.852] 	ABI class: X.Org Video Driver, version 20.0
[   634.852] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   634.853] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[   634.853] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[   634.853] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[   634.853] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   634.853] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   634.853] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   634.853] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   634.853] (==) intel(0): RGB weight 888
[   634.853] (==) intel(0): Default visual is TrueColor
[   634.853] (**) intel(0): Option "AccelMethod" "uxa"
[   634.853] (**) intel(0): Option "DRI" "3"
[   634.853] (**) intel(0): Option "TearFree" "true"
[   634.853] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[   634.853] (**) intel(0): Relaxed fencing enabled
[   634.853] (**) intel(0): Wait on SwapBuffers? enabled
[   634.853] (**) intel(0): Triple buffering? enabled
[   634.853] (**) intel(0): Framebuffer tiled
[   634.853] (**) intel(0): Pixmaps tiled
[   634.853] (**) intel(0): 3D buffers tiled
[   634.853] (**) intel(0): SwapBuffers wait enabled
[   634.853] (==) intel(0): video overlay key set to 0x101fe
[   634.853] (II) intel(0): Output eDP1 has no monitor section
[   634.854] (--) intel(0): found backlight control interface acpi_video0
[   634.866] (II) intel(0): Output VGA1 has no monitor section
[   634.973] (II) intel(0): Output HDMI1 has no monitor section
[   634.973] (II) intel(0): Output DP1 has no monitor section
[   634.974] (II) intel(0): EDID for output eDP1
[   634.974] (II) intel(0): Manufacturer: CMN  Model: 1345  Serial#: 0
[   634.974] (II) intel(0): Year: 2012  Week: 21
[   634.974] (II) intel(0): EDID Version: 1.4
[   634.974] (II) intel(0): Digital Display Input
[   634.974] (II) intel(0): 8 bits per channel
[   634.974] (II) intel(0): Digital interface is DisplayPort
[   634.974] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 17
[   634.974] (II) intel(0): Gamma: 2.20
[   634.974] (II) intel(0): No DPMS capabilities specified
[   634.974] (II) intel(0): Supported color encodings: RGB 4:4:4 
[   634.974] (II) intel(0): First detailed timing is preferred mode
[   634.974] (II) intel(0): Preferred mode is native pixel format and refresh rate
[   634.974] (II) intel(0): redX: 0.650 redY: 0.338   greenX: 0.329 greenY: 0.608
[   634.974] (II) intel(0): blueX: 0.148 blueY: 0.047   whiteX: 0.313 whiteY: 0.329
[   634.974] (II) intel(0): Manufacturer's mask: 0
[   634.974] (II) intel(0): Supported detailed timing:
[   634.974] (II) intel(0): clock: 138.8 MHz   Image Size:  294 x 165 mm
[   634.974] (II) intel(0): h_active: 1920  h_sync: 1966  h_sync_end 1996 h_blank_end 2080 h_border: 0
[   634.974] (II) intel(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1112 v_border: 0
[   634.974] (II) intel(0): Supported detailed timing:
[   634.974] (II) intel(0): clock: 92.5 MHz   Image Size:  294 x 165 mm
[   634.974] (II) intel(0): h_active: 1920  h_sync: 1966  h_sync_end 1996 h_blank_end 2080 h_border: 0
[   634.974] (II) intel(0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1112 v_border: 0
[   634.974] (II) intel(0):  VKWJC€133HSE
[   634.974] (II) intel(0): Unknown vendor-specific block 0
[   634.974] (II) intel(0): EDID (in hex):
[   634.974] (II) intel(0): 	00ffffffffffff000dae451300000000
[   634.974] (II) intel(0): 	15160104a51d117802a705a656549b26
[   634.974] (II) intel(0): 	0c505400000001010101010101010101
[   634.974] (II) intel(0): 	010101010101363680a0703820402e1e
[   634.974] (II) intel(0): 	240026a51000001a242480a070382040
[   634.974] (II) intel(0): 	2e1e240026a51000001a000000fe0056
[   634.974] (II) intel(0): 	4b574a43803133334853450a00000000
[   634.974] (II) intel(0): 	000a4131a3001000000a010a20200023
[   634.974] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   634.974] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   634.974] (II) intel(0): Printing probed modes for output eDP1
[   634.974] (II) intel(0): Modeline "1920x1080"x60.0  138.78  1920 1966 1996 2080  1080 1082 1086 1112 +hsync -vsync (66.7 kHz eP)
[   634.974] (II) intel(0): Modeline "1920x1080"x40.0   92.52  1920 1966 1996 2080  1080 1082 1086 1112 +hsync -vsync (44.5 kHz e)
[   634.974] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   634.974] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[   634.974] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   634.974] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   634.974] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   634.974] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   634.974] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   634.986] (II) intel(0): EDID for output VGA1
[   635.093] (II) intel(0): EDID for output HDMI1
[   635.093] (II) intel(0): EDID for output DP1
[   635.093] (II) intel(0): Output eDP1 connected
[   635.093] (II) intel(0): Output VGA1 disconnected
[   635.093] (II) intel(0): Output HDMI1 disconnected
[   635.093] (II) intel(0): Output DP1 disconnected
[   635.093] (II) intel(0): Using exact sizes for initial modes
[   635.093] (II) intel(0): Output eDP1 using initial mode 1920x1080 +0+0
[   635.093] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   635.093] (II) intel(0): Kernel page flipping support detected, enabling
[   635.093] (==) intel(0): DPI set to (96, 96)
[   635.093] (II) Loading sub module "fb"
[   635.093] (II) LoadModule: "fb"
[   635.093] (II) Loading /usr/lib/xorg/modules/libfb.so
[   635.093] (II) Module fb: vendor="X.Org Foundation"
[   635.093] 	compiled for 1.18.1, module version = 1.0.0
[   635.093] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   635.093] (II) Loading sub module "dri2"
[   635.093] (II) LoadModule: "dri2"
[   635.093] (II) Module "dri2" already built-in
[   635.093] (II) Loading sub module "dri3"
[   635.093] (II) LoadModule: "dri3"
[   635.093] (II) Module "dri3" already built-in
[   635.093] (==) Depth 24 pixmap format is 32 bpp
[   635.094] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[   635.094] (II) UXA(0): Driver registered support for the following operations:
[   635.094] (II)         solid
[   635.094] (II)         copy
[   635.094] (II)         composite (RENDER acceleration)
[   635.094] (II)         put_image
[   635.094] (II)         get_image
[   635.094] (II) intel(0): [DRI2] Setup complete
[   635.094] (II) intel(0): [DRI2]   DRI driver: i965
[   635.094] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[   635.094] (==) intel(0): Backing store enabled
[   635.094] (==) intel(0): Silken mouse enabled
[   635.094] (II) intel(0): Initializing HW Cursor
[   635.094] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   635.094] (==) intel(0): DPMS enabled
[   635.094] (==) intel(0): Intel XvMC decoder enabled
[   635.094] (II) intel(0): Set up textured video
[   635.094] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   635.094] (II) intel(0): DRI2: Enabled
[   635.094] (II) intel(0): DRI3: Enabled
[   635.094] (==) intel(0): hotplug detection: "enabled"
[   635.111] (--) RandR disabled
[   635.123] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   635.123] (II) AIGLX: enabled GLX_ARB_create_context
[   635.123] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   635.123] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[   635.123] (II) AIGLX: enabled GLX_INTEL_swap_event
[   635.123] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   635.123] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   635.123] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   635.123] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   635.123] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   635.123] (II) AIGLX: Loaded and initialized i965
[   635.123] (II) GLX: Initialized DRI2 GL provider for screen 0
[   635.123] (II) intel(0): Setting screen physical size to 508 x 285
[   635.178] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   635.178] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   635.178] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   635.178] (II) LoadModule: "libinput"
[   635.178] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   635.179] (II) Module libinput: vendor="X.Org Foundation"
[   635.179] 	compiled for 1.18.0, module version = 0.16.0
[   635.179] 	Module class: X.Org XInput Driver
[   635.179] 	ABI class: X.Org XInput driver, version 22.1
[   635.179] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 12 paused 0
[   635.179] (II) Using input driver 'libinput' for 'Power Button'
[   635.179] (**) Power Button: always reports core events
[   635.179] (**) Option "Device" "/dev/input/event3"
[   635.179] (**) Option "_source" "server/udev"
[   635.180] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[   635.180] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[   635.180] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   635.180] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   635.180] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[   635.180] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[   635.180] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   635.180] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   635.180] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   635.181] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 15 paused 0
[   635.181] (II) Using input driver 'libinput' for 'Video Bus'
[   635.181] (**) Video Bus: always reports core events
[   635.181] (**) Option "Device" "/dev/input/event4"
[   635.181] (**) Option "_source" "server/udev"
[   635.181] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[   635.181] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[   635.181] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[   635.181] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   635.182] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[   635.182] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[   635.182] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   635.182] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   635.182] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   635.182] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 16 paused 0
[   635.182] (II) Using input driver 'libinput' for 'Power Button'
[   635.182] (**) Power Button: always reports core events
[   635.182] (**) Option "Device" "/dev/input/event0"
[   635.182] (**) Option "_source" "server/udev"
[   635.183] (II) input device 'Power Button', /dev/input/event0 is tagged by udev as: Keyboard
[   635.183] (II) input device 'Power Button', /dev/input/event0 is a keyboard
[   635.183] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   635.183] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   635.183] (II) input device 'Power Button', /dev/input/event0 is tagged by udev as: Keyboard
[   635.183] (II) input device 'Power Button', /dev/input/event0 is a keyboard
[   635.183] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[   635.183] (II) No input driver specified, ignoring this device.
[   635.183] (II) This device may have been added with another device file.
[   635.184] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   635.184] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   635.184] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   635.184] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 17 paused 0
[   635.184] (II) Using input driver 'libinput' for 'Sleep Button'
[   635.184] (**) Sleep Button: always reports core events
[   635.184] (**) Option "Device" "/dev/input/event1"
[   635.184] (**) Option "_source" "server/udev"
[   635.184] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[   635.184] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[   635.184] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[   635.184] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   635.185] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[   635.185] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[   635.185] (II) config/udev: Adding input device Laptop_Integrated_Webcam_1.3M (/dev/input/event15)
[   635.185] (**) Laptop_Integrated_Webcam_1.3M: Applying InputClass "evdev keyboard catchall"
[   635.185] (**) Laptop_Integrated_Webcam_1.3M: Applying InputClass "libinput keyboard catchall"
[   635.186] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 18 paused 0
[   635.186] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_1.3M'
[   635.186] (**) Laptop_Integrated_Webcam_1.3M: always reports core events
[   635.186] (**) Option "Device" "/dev/input/event15"
[   635.186] (**) Option "_source" "server/udev"
[   635.186] (II) input device 'Laptop_Integrated_Webcam_1.3M', /dev/input/event15 is tagged by udev as: Keyboard
[   635.186] (II) input device 'Laptop_Integrated_Webcam_1.3M', /dev/input/event15 is a keyboard
[   635.186] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input16/event15"
[   635.186] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_1.3M" (type: KEYBOARD, id 10)
[   635.187] (II) input device 'Laptop_Integrated_Webcam_1.3M', /dev/input/event15 is tagged by udev as: Keyboard
[   635.187] (II) input device 'Laptop_Integrated_Webcam_1.3M', /dev/input/event15 is a keyboard
[   635.187] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[   635.187] (II) No input driver specified, ignoring this device.
[   635.187] (II) This device may have been added with another device file.
[   635.187] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[   635.187] (II) No input driver specified, ignoring this device.
[   635.187] (II) This device may have been added with another device file.
[   635.187] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[   635.187] (II) No input driver specified, ignoring this device.
[   635.187] (II) This device may have been added with another device file.
[   635.188] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[   635.188] (II) No input driver specified, ignoring this device.
[   635.188] (II) This device may have been added with another device file.
[   635.188] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[   635.188] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   635.188] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   635.188] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 19 paused 0
[   635.188] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   635.188] (**) AT Translated Set 2 keyboard: always reports core events
[   635.188] (**) Option "Device" "/dev/input/event5"
[   635.188] (**) Option "_source" "server/udev"
[   635.189] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is tagged by udev as: Keyboard
[   635.189] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is a keyboard
[   635.189] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[   635.189] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   635.189] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is tagged by udev as: Keyboard
[   635.189] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is a keyboard
[   635.189] (II) config/udev: Adding input device CyPS/2 Cypress Trackpad (/dev/input/event14)
[   635.189] (**) CyPS/2 Cypress Trackpad: Applying InputClass "evdev touchpad catchall"
[   635.189] (**) CyPS/2 Cypress Trackpad: Applying InputClass "evdev touchscreen catchall"
[   635.189] (**) CyPS/2 Cypress Trackpad: Applying InputClass "touchpad catchall"
[   635.189] (**) CyPS/2 Cypress Trackpad: Applying InputClass "Default clickpad buttons"
[   635.189] (**) CyPS/2 Cypress Trackpad: Applying InputClass "libinput touchpad catchall"
[   635.190] (**) CyPS/2 Cypress Trackpad: Applying InputClass "libinput touchscreen catchall"
[   635.190] (**) CyPS/2 Cypress Trackpad: Applying InputClass "touchpad catchall"
[   635.190] (**) CyPS/2 Cypress Trackpad: Applying InputClass "Default clickpad buttons"
[   635.190] (II) LoadModule: "synaptics"
[   635.190] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   635.190] (II) Module synaptics: vendor="X.Org Foundation"
[   635.190] 	compiled for 1.18.0, module version = 1.8.3
[   635.190] 	Module class: X.Org XInput Driver
[   635.190] 	ABI class: X.Org XInput driver, version 22.1
[   635.190] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 20 paused 0
[   635.190] (II) Using input driver 'synaptics' for 'CyPS/2 Cypress Trackpad'
[   635.190] (**) CyPS/2 Cypress Trackpad: always reports core events
[   635.190] (**) Option "Protocol" "event"
[   635.190] (**) Option "Device" "/dev/input/event14"
[   635.190] (II) synaptics: CyPS/2 Cypress Trackpad: ignoring touch events for semi-multitouch device
[   635.190] (--) synaptics: CyPS/2 Cypress Trackpad: x-axis range 0 - 1600 (res 16)
[   635.190] (--) synaptics: CyPS/2 Cypress Trackpad: y-axis range 0 - 900 (res 15)
[   635.190] (--) synaptics: CyPS/2 Cypress Trackpad: pressure range 0 - 255
[   635.190] (--) synaptics: CyPS/2 Cypress Trackpad: finger width range 0 - 255
[   635.190] (--) synaptics: CyPS/2 Cypress Trackpad: buttons: left right middle double triple
[   635.190] (--) synaptics: CyPS/2 Cypress Trackpad: Vendor 0x2 Product 0x11
[   635.190] (**) Option "AreaTopEdge" "40"
[   635.190] (**) Option "AreaRightEdge" "1020"
[   635.190] (**) Option "FingerLow" "10"
[   635.190] (**) Option "FingerHigh" "40"
[   635.190] (**) Option "MaxTapTime" "100"
[   635.190] (**) Option "EmulateTwoFingerMinZ" "10"
[   635.190] (**) Option "EmulateTwoFingerMinW" "8"
[   635.190] (**) Option "VertScrollDelta" "15"
[   635.190] (**) Option "HorizScrollDelta" "100"
[   635.190] (**) Option "VertTwoFingerScroll" "0"
[   635.190] (**) Option "HorizTwoFingerScroll" "0"
[   635.190] (**) Option "TapButton1" "1"
[   635.190] (**) Option "TapButton2" "0"
[   635.190] (**) Option "TapButton3" "0"
[   635.190] (**) Option "ClickFinger2" "0"
[   635.190] (**) Option "ClickFinger3" "0"
[   635.190] (**) Option "CircularScrolling" "0"
[   635.190] (**) Option "PalmDetect" "1"
[   635.190] (**) Option "MinSpeed" "0.4"
[   635.190] (**) Option "MaxSpeed" "2"
[   635.190] (**) Option "AccelFactor" "0.8"
[   635.191] (--) synaptics: CyPS/2 Cypress Trackpad: touchpad found
[   635.191] (**) CyPS/2 Cypress Trackpad: always reports core events
[   635.191] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event14"
[   635.191] (II) XINPUT: Adding extended input device "CyPS/2 Cypress Trackpad" (type: TOUCHPAD, id 12)
[   635.191] (**) synaptics: CyPS/2 Cypress Trackpad: (accel) MinSpeed is now constant deceleration 2.5
[   635.191] (**) synaptics: CyPS/2 Cypress Trackpad: (accel) MaxSpeed is now 5.00
[   635.191] (**) synaptics: CyPS/2 Cypress Trackpad: (accel) AccelFactor is now 0.800
[   635.191] (**) CyPS/2 Cypress Trackpad: (accel) keeping acceleration scheme 1
[   635.191] (**) CyPS/2 Cypress Trackpad: (accel) acceleration profile 1
[   635.191] (**) CyPS/2 Cypress Trackpad: (accel) acceleration factor: 2.000
[   635.191] (**) CyPS/2 Cypress Trackpad: (accel) acceleration threshold: 4
[   635.191] (--) synaptics: CyPS/2 Cypress Trackpad: touchpad found
[   635.191] (II) config/udev: Adding input device CyPS/2 Cypress Trackpad (/dev/input/mouse0)
[   635.191] (**) CyPS/2 Cypress Trackpad: Ignoring device from InputClass "touchpad ignore duplicates"
[   635.191] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   635.191] (II) No input driver specified, ignoring this device.
[   635.191] (II) This device may have been added with another device file.
[   635.192] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event11)
[   635.192] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   635.192] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   635.192] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 21 paused 0
[   635.192] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[   635.192] (**) Dell WMI hotkeys: always reports core events
[   635.192] (**) Option "Device" "/dev/input/event11"
[   635.192] (**) Option "_source" "server/udev"
[   635.192] (II) input device 'Dell WMI hotkeys', /dev/input/event11 is tagged by udev as: Keyboard
[   635.193] (II) input device 'Dell WMI hotkeys', /dev/input/event11 is a keyboard
[   635.193] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event11"
[   635.193] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[   635.193] (II) input device 'Dell WMI hotkeys', /dev/input/event11 is tagged by udev as: Keyboard
[   635.193] (II) input device 'Dell WMI hotkeys', /dev/input/event11 is a keyboard
[   635.193] (II) config/udev: Adding input device Xbox Gamepad (userspace driver) (/dev/input/event12)
[   635.193] (II) No input driver specified, ignoring this device.
[   635.193] (II) This device may have been added with another device file.
[   635.193] (II) config/udev: Adding input device Xbox Gamepad (userspace driver) (/dev/input/js0)
[   635.193] (II) No input driver specified, ignoring this device.
[   635.193] (II) This device may have been added with another device file.
[   635.194] (II) config/udev: Adding input device Xbox Gamepad (userspace driver) #2 (/dev/input/event13)
[   635.194] (II) No input driver specified, ignoring this device.
[   635.194] (II) This device may have been added with another device file.
[   635.194] (II) config/udev: Adding input device Xbox Gamepad (userspace driver) #2 (/dev/input/js1)
[   635.194] (II) No input driver specified, ignoring this device.
[   635.194] (II) This device may have been added with another device file.
[   638.358] (**) Option "fd" "12"
[   638.358] (**) Option "fd" "15"
[   638.358] (**) Option "fd" "16"
[   638.358] (**) Option "fd" "17"
[   638.358] (**) Option "fd" "18"
[   638.358] (**) Option "fd" "19"
[   638.358] (**) Option "fd" "21"
[   638.358] (II) UnloadModule: "libinput"
[   638.358] (II) systemd-logind: releasing fd for 13:75
[   638.370] (II) UnloadModule: "synaptics"
[   638.370] (II) systemd-logind: releasing fd for 13:78
[   638.400] (II) UnloadModule: "libinput"
[   638.400] (II) systemd-logind: releasing fd for 13:69
[   638.416] (II) UnloadModule: "libinput"
[   638.416] (II) systemd-logind: releasing fd for 13:79
[   638.443] (II) UnloadModule: "libinput"
[   638.443] (II) systemd-logind: releasing fd for 13:65
[   638.456] (II) UnloadModule: "libinput"
[   638.456] (II) systemd-logind: releasing fd for 13:64
[   638.470] (II) UnloadModule: "libinput"
[   638.470] (II) systemd-logind: releasing fd for 13:68
[   638.483] (II) UnloadModule: "libinput"
[   638.483] (II) systemd-logind: releasing fd for 13:67
[   638.516] (II) Server terminated successfully (0). Closing log file.

~/.xsession-errors:

startkde: Starting up...
/usr/bin/kdeinit5: symbol lookup error: /usr/bin/kdeinit5: undefined symbol: _ZN12KStartupInfo13sendChangeXcbEP16xcb_connection_tiRK14KStartupInfoIdRK16KStartupInfoData
startkde: Could not start kdeinit5. Check your installation.
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
      after 190 requests (182 known processed) with 0 events remaining.

Note the same message from inside SDDM before so it is clearly a Plasma, KDE Frameworks or QT issue.

I have performed the same troubleshooting steps on the desktop machine but nothing in the logs has jumped out at me (error in xsession-errors is the same)

I have Cinnamon installed on the laptop which starts fine so I am logged into that right now to type this post.

If anyone else is encountering this or has any ideas I am all ears.

Last edited by gunzy83 (2016-02-22 11:49:44)

Offline

#2 2016-02-22 11:36:27

arojas
Developer
From: Spain
Registered: 2011-10-09
Posts: 2,312

Re: [Solved] Plasma 5 Broken After Last Update

Post the output of 

pacman -Q kinit kwindowsystem

Online

#3 2016-02-22 11:44:05

gunzy83
Member
From: Brisbane, Austalia
Registered: 2013-10-14
Posts: 13

Re: [Solved] Plasma 5 Broken After Last Update

arojas wrote:

Post the output of 

pacman -Q kinit kwindowsystem
pacman -Q kinit kwindowsystem
kinit 5.19.0-1
error: package 'kwindowsystem' was not found

Weird... but weirder still:

sudo pacman -S kwindowsystem 
[sudo] password for gunzy: 
resolving dependencies...
looking for conflicting packages...
:: kwindowsystem and kwindowsystem-git are in conflict. Remove kwindowsystem-git?

This must be a remnant from these machines being on Arch from pre plasma5 and my playing around with the new shinys.

I have installed it now... will log out and try from SDDM and will report back.

Offline

#4 2016-02-22 11:48:34

gunzy83
Member
From: Brisbane, Austalia
Registered: 2013-10-14
Posts: 13

Re: [Solved] Plasma 5 Broken After Last Update

It is working now. Thank you very much arojas, I apparently still have much to learn.

Offline

Pages: 1

Board footer

Powered by FluxBB