Arch Linux

heitorpb

Member

Registered: 2012-01-21

Posts: 46

dmesg errors

Hello!

Some time ago I noticed my dmesg was going crazy, with these lines repeated over and over:

[17738.756579] ACPI Error: [AR02] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[17738.756585] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0._PRT] (Node ffff8802568e7a00), AE_NOT_FOUND (20150930/psparse-542)
[17738.758869] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[17738.758899] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[17738.758914] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[17738.758935] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[17738.758949] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[17738.758976] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[17738.758990] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[17738.761389] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)

I noticed it when I was testing an old USB flash drive, that is dead. But nothing is weird in my laptop.

I thought it was related to this https://bbs.archlinux.org/viewtopic.php?id=206659
But the nvidia driver was updated recently and those warning and errors in dmesg are stil there.

Some info:

$ uname -a
Linux freyja 4.4.1-2-ARCH #1 SMP PREEMPT Wed Feb 3 13:12:33 UTC 2016 x86_64 GNU/Linux
$ lspci 
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2)
08:00.0 Network controller: Intel Corporation Wireless 3160 (rev 93)
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01)

So, how do I fix these errors?

Thank you a lot for taking your time reading this.
Cheers.

paulkerry

Member

From: Sheffield, UK

Registered: 2014-10-02

Posts: 611

Re: dmesg errors

Even though you are getting those messages, is anything not working as you would expect, especially regarding power management in your laptop?

Posting the make/model of your laptop could be useful.

Are you running the latest BIOS version as BIOS updates very often fix ACPI issues?

heitorpb

Member

Registered: 2012-01-21

Posts: 46

Re: dmesg errors

THe only thing weird is that my battery is not charging more than 56% and it is discharging really fast.

My laptop is a Y50-70 (Lenovo).

I never updated the BIOS. But I remember that I had none of those errors/warning were there some time ago.

paulkerry

Member

From: Sheffield, UK

Registered: 2014-10-02

Posts: 611

Re: dmesg errors

Having searched a little online for "lenovo "y50-70" acpi", it appears that the Lenovo Y50-70 is known to have power management issues - for instance...
https://forums.lenovo.com/t5/Lenovo-P-Y … -p/1808359
points to a windows based solution using a program called "Lenovo Energy Manager".

A post relating to this model running Ubuntu is at https://forums.lenovo.com/t5/Linux-Disc … -p/2031094

Is your laptop dual-boot?

Other online posts seem to indicate Lenovo's can have bios settings specifically for windows only operating systems, which maybe causing issues...

ewaller

Administrator

From: Pasadena, CA

Registered: 2009-07-13

Posts: 20,293

Re: dmesg errors

This thread may also be of interest. https://bbs.archlinux.org/viewtopic.php?id=209183
No solutions though

---

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

heitorpb

Member

Registered: 2012-01-21

Posts: 46

Re: dmesg errors

Is your laptop dual-boot?

Other online posts seem to indicate Lenovo's can have bios settings specifically for windows only operating systems, which maybe causing issues...

This laptop came with Windows 8 (or 8.1, I dont remember). BUt now I only have ArchLinux. I was planning to install Win7 to play some games, but i have been to lazy for it.

In Lenovo website, there is an update for the BIOS:
http://support.lenovo.com/fi/en/product … beta=false

...
Summary of changes
==================
General Information:

9ECN43WW
Add
1. None

Modified:
1.    Disable Intel S2DDT

Fixed:
1.    SCU OS Optimized Defaults option text error

BUt the download is only for Windows...

Returning to those dmesg messages, is it sure to be related to these battery problem?

paulkerry

Member

From: Sheffield, UK

Registered: 2014-10-02

Posts: 611

Re: dmesg errors

Returning to those dmesg messages, is it sure to be related to these battery problem?

Not necessarily no: you would have to check with Lenovo, although I bet they would say you are using an unsupported O/S...

beanaroo

Member

Registered: 2013-03-05

Posts: 39

Re: dmesg errors

I have a Lenovo G780 and I'm getting the same block with error every five minutes:

Mar 05 13:19:11 bean-laptizz kernel: nouveau 0000:01:00.0: DRM: resuming kernel object tree...
Mar 05 13:19:11 bean-laptizz kernel: nouveau 0000:01:00.0: DRM: resuming client object trees...
Mar 05 13:19:11 bean-laptizz kernel: nouveau 0000:01:00.0: DRM: resuming display...
Mar 05 13:19:11 bean-laptizz kernel: nouveau 0000:01:00.0: DRM: resuming console...
Mar 05 13:19:16 bean-laptizz kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
Mar 05 13:19:16 bean-laptizz kernel: ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
Mar 05 13:19:16 bean-laptizz kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
Mar 05 13:19:16 bean-laptizz kernel: nouveau 0000:01:00.0: DRM: suspending console...
Mar 05 13:19:16 bean-laptizz kernel: nouveau 0000:01:00.0: DRM: suspending display...
Mar 05 13:19:16 bean-laptizz kernel: nouveau 0000:01:00.0: DRM: evicting buffers...
Mar 05 13:19:16 bean-laptizz kernel: nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
Mar 05 13:19:16 bean-laptizz kernel: nouveau 0000:01:00.0: DRM: suspending client object trees...
Mar 05 13:19:16 bean-laptizz kernel: nouveau 0000:01:00.0: DRM: suspending kernel object tree...

Last edited by beanaroo (2016-03-05 00:26:09)

Ocypheum

Member

Registered: 2015-09-26

Posts: 58

Re: dmesg errors

Lenovo G510 with battery issues (see here). I have a lot of weird dmesg messages related to ACPI but not the same ones.

Here's the output of "dmesg | grep -i ACPI":

[    0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] efi:  ACPI=0x9cffe000  ACPI 2.0=0x9cffe014  SMBIOS=0x9cebef98 
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFE9000 00AE0E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CFBA000 000040
[    0.000000] ACPI: SLIC 0x000000009CFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009CFF9000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFE6000 002028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFE4000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFE3000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFE1000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFE0000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDF000 000539 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDE000 000AD8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFDA000 00348C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000009CFD9000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000035] ACPI: Core revision 20150410
[    0.010344] ACPI: All ACPI Tables successfully acquired
[    0.188528] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[    0.239240] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.239241] ACPI: bus type PCI registered
[    0.239243] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.269486] ACPI: Added _OSI(Module Device)
[    0.269488] ACPI: Added _OSI(Processor Device)
[    0.269489] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.269490] ACPI: Added _OSI(Processor Aggregator Device)
[    0.275166] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.275894] ACPI: Dynamic OEM Table Load:
[    0.275903] ACPI: SSDT 0xFFFF880159F03000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120518)
[    0.276481] ACPI: Dynamic OEM Table Load:
[    0.276489] ACPI: SSDT 0xFFFF880159D2A000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120518)
[    0.277102] ACPI: Dynamic OEM Table Load:
[    0.277108] ACPI: SSDT 0xFFFF880159EEEC00 000119 (v01 PmRef  ApCst    00003000 INTL 20120518)
[    0.277994] ACPI : EC: EC started
[    0.279557] ACPI: Interpreter enabled
[    0.279567] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.279573] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.279589] ACPI: (supports S0 S3 S4 S5)
[    0.279590] ACPI: Using IOAPIC for interrupt routing
[    0.279614] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.411091] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.411096] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.411195] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.412132] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.412533] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.412720] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.412913] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.413103] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.413485] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.414340] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.437467] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.517407] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.517446] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.517482] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.517518] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.517553] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.517588] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.517623] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.517659] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.517756] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.517785] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.517971] PCI: Using ACPI for IRQ routing
[    0.529762] pnp: PnP ACPI init
[    0.529893] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.529931] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.529956] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.529992] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.530034] pnp 00:04: Plug and Play ACPI device, IDs SYN2b15 SYN0700 SYN0002 PNP0f13 (active)
[    0.530100] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.585779] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.586105] pnp: PnP ACPI: found 7 devices
[    0.592135] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.729226] ACPI: bus type USB registered
[   12.995595] ACPI: Power Button [PWRB]
[   12.995678] ACPI: Lid Switch [LID0]
[   12.995712] ACPI: Power Button [PWRF]
[   13.187151] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405F conflicts with OpRegion 0x0000000000004040-0x000000000000404F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
[   13.187156] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.450223] ACPI: Thermal Zone [TZ00] (34 C)
[   13.570056] ACPI: Battery Slot [BAT1] (battery present)
[   13.570187] ACPI: AC Adapter [ACAD] (off-line)
[   14.441457] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[ 3909.409408] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 3909.409456] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 3909.409575] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 3909.426145] ACPI: Preparing to enter system sleep state S3
[ 3909.426337] ACPI : EC: EC stopped
[ 3909.433019] ACPI: Low-level resume complete
[ 3909.433060] ACPI : EC: EC started
[ 3909.482995] ACPI: Waking up from system sleep state S3
[ 3909.489970] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 3909.489974] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 3909.490064] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 3909.631937] rtc_cmos 00:02: System wakeup disabled by ACPI
[10681.233753] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[10681.233864] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[10681.234024] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[10681.250313] ACPI: Preparing to enter system sleep state S3
[10681.250672] ACPI : EC: EC stopped
[10681.258823] ACPI: Low-level resume complete
[10681.258870] ACPI : EC: EC started
[10681.308761] ACPI: Waking up from system sleep state S3
[10681.313723] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[10681.313787] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[10681.313788] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[10681.395423] rtc_cmos 00:02: System wakeup disabled by ACPI

Edit: I also have issues resuming from sleep (see here). Do you have these?

Last edited by Ocypheum (2016-03-05 21:07:32)