You are not logged in.

Pages: 1

#1 2016-02-13 00:40:05

vertex5
Member
Registered: 2016-02-13
Posts: 3

[solved] black screen since the nvidia update

ever since the recent nvidia driver update(361.28) i haven't been able to get a graphical session going, all I get is a black screen.

here is my Xorg.0.log:

[  1068.837] (--) Log file renamed from "/var/log/Xorg.pid-1144.log" to "/var/log/Xorg.0.log"
[  1068.838] 
X.Org X Server 1.18.1
Release Date: 2016-02-08
[  1068.838] X Protocol Version 11, Revision 0
[  1068.838] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[  1068.838] Current Operating System: Linux julian 4.4.1-2-ARCH #1 SMP PREEMPT Wed Feb 3 13:12:33 UTC 2016 x86_64
[  1068.838] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=edf5a1eb-53a3-4260-a100-a1585fd1a073 rw quiet
[  1068.838] Build Date: 11 February 2016  09:57:03AM
[  1068.838]  
[  1068.838] Current version of pixman: 0.34.0
[  1068.838] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1068.838] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1068.838] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 13 01:20:58 2016
[  1068.838] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1068.838] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1068.838] (==) No Layout section.  Using the first Screen section.
[  1068.838] (==) No screen section available. Using defaults.
[  1068.838] (**) |-->Screen "Default Screen Section" (0)
[  1068.838] (**) |   |-->Monitor "<default monitor>"
[  1068.838] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  1068.838] (**) |   |-->Device "Device0"
[  1068.838] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1068.838] (==) Automatically adding devices
[  1068.838] (==) Automatically enabling devices
[  1068.838] (==) Automatically adding GPU devices
[  1068.838] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1068.838] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1068.838] 	Entry deleted from font path.
[  1068.838] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1068.838] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1068.838] 	Entry deleted from font path.
[  1068.838] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1068.838] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[  1068.838] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1068.838] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1068.838] (II) Loader magic: 0x81ad60
[  1068.838] (II) Module ABI versions:
[  1068.838] 	X.Org ANSI C Emulation: 0.4
[  1068.838] 	X.Org Video Driver: 20.0
[  1068.838] 	X.Org XInput driver : 22.1
[  1068.838] 	X.Org Server Extension : 9.0
[  1068.838] (++) using VT number 1

[  1068.838] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  1068.839] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1068.839] (II) xfree86: Adding drm device (/dev/dri/card1)
[  1068.839] (--) PCI: (0:0:2:0) 8086:0412:1043:8534 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[  1068.839] (--) PCI:*(0:1:0:0) 10de:1004:19da:1314 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  1068.839] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1068.839] (WW) "x11glvnd" will not be loaded unless you've specified it to be loaded elsewhere.
[  1068.839] (II) "glx" will be loaded by default.
[  1068.839] (II) LoadModule: "glx"
[  1068.840] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1068.841] (II) Module glx: vendor="NVIDIA Corporation"
[  1068.841] 	compiled for 4.0.2, module version = 1.0.0
[  1068.841] 	Module class: X.Org Server Extension
[  1068.841] (II) NVIDIA GLX Module  361.28  Wed Feb  3 15:10:57 PST 2016
[  1068.841] (II) LoadModule: "nvidia"
[  1068.841] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1068.841] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1068.841] 	compiled for 4.0.2, module version = 1.0.0
[  1068.841] 	Module class: X.Org Video Driver
[  1068.841] (II) NVIDIA dlloader X Driver  361.28  Wed Feb  3 14:48:10 PST 2016
[  1068.841] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1068.843] (II) Loading sub module "fb"
[  1068.843] (II) LoadModule: "fb"
[  1068.843] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1068.843] (II) Module fb: vendor="X.Org Foundation"
[  1068.843] 	compiled for 1.18.1, module version = 1.0.0
[  1068.843] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1068.843] (II) Loading sub module "wfb"
[  1068.843] (II) LoadModule: "wfb"
[  1068.843] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1068.843] (II) Module wfb: vendor="X.Org Foundation"
[  1068.843] 	compiled for 1.18.1, module version = 1.0.0
[  1068.843] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1068.843] (II) Loading sub module "ramdac"
[  1068.843] (II) LoadModule: "ramdac"
[  1068.843] (II) Module "ramdac" already built-in
[  1068.843] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1068.843] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  1068.843] (==) NVIDIA(0): RGB weight 888
[  1068.843] (==) NVIDIA(0): Default visual is TrueColor
[  1068.843] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1068.843] (**) NVIDIA(0): Option "NoLogo" "true"
[  1068.843] (**) NVIDIA(0): Option "RegistryDwords" "OGL_MaxFramesAllowed=0x0; EnableBrightnessControl=1"
[  1068.843] (**) NVIDIA(0): Enabling 2D acceleration
[  1069.349] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[  1069.349] (--) NVIDIA(0):     CRT-0
[  1069.349] (--) NVIDIA(0):     DFP-0 (boot)
[  1069.349] (--) NVIDIA(0):     DFP-1
[  1069.349] (--) NVIDIA(0):     DFP-2
[  1069.349] (--) NVIDIA(0):     DFP-3
[  1069.349] (--) NVIDIA(0):     DFP-4
[  1069.364] (--) NVIDIA(0): CRT-0: disconnected
[  1069.364] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[  1069.364] (--) NVIDIA(0): 
[  1069.393] (--) NVIDIA(0): Ancor Communications Inc ASUS PA238 (DFP-0): connected
[  1069.393] (--) NVIDIA(0): Ancor Communications Inc ASUS PA238 (DFP-0): Internal TMDS
[  1069.393] (--) NVIDIA(0): Ancor Communications Inc ASUS PA238 (DFP-0): 330.0 MHz maximum pixel clock
[  1069.393] (--) NVIDIA(0): 
[  1069.393] (--) NVIDIA(0): DFP-1: disconnected
[  1069.393] (--) NVIDIA(0): DFP-1: Internal TMDS
[  1069.393] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[  1069.393] (--) NVIDIA(0): 
[  1069.394] (--) NVIDIA(0): DFP-2: disconnected
[  1069.394] (--) NVIDIA(0): DFP-2: Internal TMDS
[  1069.394] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[  1069.394] (--) NVIDIA(0): 
[  1069.394] (--) NVIDIA(0): DFP-3: disconnected
[  1069.394] (--) NVIDIA(0): DFP-3: Internal TMDS
[  1069.394] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[  1069.394] (--) NVIDIA(0): 
[  1069.394] (--) NVIDIA(0): Acer XG270HU (DFP-4): connected
[  1069.394] (--) NVIDIA(0): Acer XG270HU (DFP-4): Internal DisplayPort
[  1069.394] (--) NVIDIA(0): Acer XG270HU (DFP-4): 960.0 MHz maximum pixel clock
[  1069.394] (--) NVIDIA(0): 
[  1069.394] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[  1069.395] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 780 (GK110) at PCI:1:0:0 (GPU-0)
[  1069.395] (--) NVIDIA(0): Memory: 3145728 kBytes
[  1069.395] (--) NVIDIA(0): VideoBIOS: 80.80.21.00.07
[  1069.395] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  1069.395] (**) NVIDIA(0): Option "Primary" "true"
[  1069.395] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1069.395] (**) NVIDIA(0):     device Ancor Communications Inc ASUS PA238 (DFP-0) (Using
[  1069.395] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[  1069.395] (**) NVIDIA(0):     devices.)
[  1069.396] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1069.396] (**) NVIDIA(0):     device Acer XG270HU (DFP-4) (Using EDID frequencies has
[  1069.396] (**) NVIDIA(0):     been enabled on all display devices.)
[  1069.397] (==) NVIDIA(0): 
[  1069.397] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  1069.397] (==) NVIDIA(0):     will be used as the requested mode.
[  1069.397] (==) NVIDIA(0): 
[  1069.397] (II) NVIDIA(0): Validated MetaModes:
[  1069.397] (II) NVIDIA(0):     "DFP-4:nvidia-auto-select,DFP-0:nvidia-auto-select"
[  1069.397] (II) NVIDIA(0): Virtual screen size determined to be 4480 x 1440
[  1069.402] (--) NVIDIA(0): DPI set to (108, 107); computed from "UseEdidDpi" X config
[  1069.402] (--) NVIDIA(0):     option
[  1069.402] (--) Depth 24 pixmap format is 32 bpp
[  1069.403] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[  1069.403] (II) NVIDIA:     access.
[  1069.405] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  1069.405] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  1069.405] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  1069.405] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  1069.405] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  1069.405] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  1069.405] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  1069.405] (II) NVIDIA(0):     Config Options in the README.
[  1069.416] (II) NVIDIA(0): Setting mode "DFP-4:nvidia-auto-select,DFP-0:nvidia-auto-select"
[  1069.478] (==) NVIDIA(0): Disabling shared memory pixmaps
[  1069.478] (==) NVIDIA(0): Backing store enabled
[  1069.478] (==) NVIDIA(0): Silken mouse enabled
[  1069.478] (==) NVIDIA(0): DPMS enabled
[  1069.478] (II) Loading sub module "x11glvnd"
[  1069.478] (II) LoadModule: "x11glvnd"
[  1069.478] (II) Loading /usr/lib/xorg/modules/extensions/x11glvnd.so
[  1069.478] (II) Module x11glvnd: vendor="NVIDIA Corporation"
[  1069.478] 	compiled for 4.0.2, module version = 1.0.0
[  1069.478] 	Module class: X.Org Server Extension
[  1069.478] (II) x11glvnd Loading
[  1069.478] (II) Loading sub module "dri2"
[  1069.478] (II) LoadModule: "dri2"
[  1069.478] (II) Module "dri2" already built-in
[  1069.478] (II) NVIDIA(0): [DRI2] Setup complete
[  1069.478] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  1069.478] (--) RandR disabled
[  1069.480] (II) Initializing extension GLX
[  1069.480] (II) Indirect GLX disabled.
[  1069.501] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1069.501] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1069.501] (**) Power Button: Applying InputClass "system-keyboard"
[  1069.501] (II) LoadModule: "evdev"
[  1069.501] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1069.501] (II) Module evdev: vendor="X.Org Foundation"
[  1069.501] 	compiled for 1.18.0, module version = 2.10.1
[  1069.501] 	Module class: X.Org XInput Driver
[  1069.501] 	ABI class: X.Org XInput driver, version 22.1
[  1069.501] (II) Using input driver 'evdev' for 'Power Button'
[  1069.501] (**) Power Button: always reports core events
[  1069.501] (**) evdev: Power Button: Device: "/dev/input/event3"
[  1069.501] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1069.501] (--) evdev: Power Button: Found keys
[  1069.501] (II) evdev: Power Button: Configuring as keyboard
[  1069.501] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3"
[  1069.501] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1069.501] (**) Option "xkb_rules" "evdev"
[  1069.501] (**) Option "xkb_model" "pc104"
[  1069.501] (**) Option "xkb_layout" "us"
[  1069.501] (**) Option "xkb_variant" "altgr-intl"
[  1069.511] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[  1069.511] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1069.511] (**) Video Bus: Applying InputClass "system-keyboard"
[  1069.511] (II) Using input driver 'evdev' for 'Video Bus'
[  1069.511] (**) Video Bus: always reports core events
[  1069.511] (**) evdev: Video Bus: Device: "/dev/input/event4"
[  1069.511] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  1069.511] (--) evdev: Video Bus: Found keys
[  1069.511] (II) evdev: Video Bus: Configuring as keyboard
[  1069.511] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event4"
[  1069.511] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1069.511] (**) Option "xkb_rules" "evdev"
[  1069.511] (**) Option "xkb_model" "pc104"
[  1069.511] (**) Option "xkb_layout" "us"
[  1069.511] (**) Option "xkb_variant" "altgr-intl"
[  1069.511] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1069.511] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1069.511] (**) Power Button: Applying InputClass "system-keyboard"
[  1069.511] (II) Using input driver 'evdev' for 'Power Button'
[  1069.511] (**) Power Button: always reports core events
[  1069.511] (**) evdev: Power Button: Device: "/dev/input/event2"
[  1069.511] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1069.511] (--) evdev: Power Button: Found keys
[  1069.511] (II) evdev: Power Button: Configuring as keyboard
[  1069.511] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2"
[  1069.511] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  1069.511] (**) Option "xkb_rules" "evdev"
[  1069.511] (**) Option "xkb_model" "pc104"
[  1069.511] (**) Option "xkb_layout" "us"
[  1069.511] (**) Option "xkb_variant" "altgr-intl"
[  1069.511] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[  1069.511] (II) No input driver specified, ignoring this device.
[  1069.511] (II) This device may have been added with another device file.
[  1069.511] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[  1069.511] (II) No input driver specified, ignoring this device.
[  1069.511] (II) This device may have been added with another device file.
[  1069.512] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event20)
[  1069.512] (II) No input driver specified, ignoring this device.
[  1069.512] (II) This device may have been added with another device file.
[  1069.512] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event21)
[  1069.512] (II) No input driver specified, ignoring this device.
[  1069.512] (II) This device may have been added with another device file.
[  1069.512] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[  1069.512] (II) No input driver specified, ignoring this device.
[  1069.512] (II) This device may have been added with another device file.
[  1069.512] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event16)
[  1069.512] (II) No input driver specified, ignoring this device.
[  1069.512] (II) This device may have been added with another device file.
[  1069.512] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[  1069.512] (II) No input driver specified, ignoring this device.
[  1069.512] (II) This device may have been added with another device file.
[  1069.512] (II) config/udev: Adding input device Kingsis Peripherals ZOWIE Gaming mouse (/dev/input/event5)
[  1069.512] (**) Kingsis Peripherals ZOWIE Gaming mouse: Applying InputClass "evdev pointer catchall"
[  1069.512] (**) Kingsis Peripherals ZOWIE Gaming mouse: Applying InputClass "My Mouse"
[  1069.512] (II) Using input driver 'evdev' for 'Kingsis Peripherals ZOWIE Gaming mouse'
[  1069.512] (**) Kingsis Peripherals ZOWIE Gaming mouse: always reports core events
[  1069.512] (**) evdev: Kingsis Peripherals ZOWIE Gaming mouse: Device: "/dev/input/event5"
[  1069.563] (--) evdev: Kingsis Peripherals ZOWIE Gaming mouse: Vendor 0x1af3 Product 0x1
[  1069.563] (--) evdev: Kingsis Peripherals ZOWIE Gaming mouse: Found 10 mouse buttons
[  1069.563] (--) evdev: Kingsis Peripherals ZOWIE Gaming mouse: Found scroll wheel(s)
[  1069.563] (--) evdev: Kingsis Peripherals ZOWIE Gaming mouse: Found relative axes
[  1069.563] (--) evdev: Kingsis Peripherals ZOWIE Gaming mouse: Found x and y relative axes
[  1069.563] (II) evdev: Kingsis Peripherals ZOWIE Gaming mouse: Configuring as mouse
[  1069.563] (II) evdev: Kingsis Peripherals ZOWIE Gaming mouse: Adding scrollwheel support
[  1069.563] (**) evdev: Kingsis Peripherals ZOWIE Gaming mouse: YAxisMapping: buttons 4 and 5
[  1069.563] (**) evdev: Kingsis Peripherals ZOWIE Gaming mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1069.563] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:1AF3:0001.0003/input/input7/event5"
[  1069.563] (II) XINPUT: Adding extended input device "Kingsis Peripherals ZOWIE Gaming mouse" (type: MOUSE, id 9)
[  1069.563] (II) evdev: Kingsis Peripherals ZOWIE Gaming mouse: initialized for relative axes.
[  1069.563] (**) Option "AccelerationScheme" "none"
[  1069.563] (**) Kingsis Peripherals ZOWIE Gaming mouse: (accel) selected scheme none/0
[  1069.563] (**) Kingsis Peripherals ZOWIE Gaming mouse: (accel) acceleration factor: 2.000
[  1069.563] (**) Kingsis Peripherals ZOWIE Gaming mouse: (accel) acceleration threshold: 4
[  1069.563] (II) config/udev: Adding input device Kingsis Peripherals ZOWIE Gaming mouse (/dev/input/mouse0)
[  1069.563] (**) Kingsis Peripherals ZOWIE Gaming mouse: Applying InputClass "My Mouse"
[  1069.563] (II) No input driver specified, ignoring this device.
[  1069.563] (II) This device may have been added with another device file.
[  1069.563] (II) config/udev: Adding input device USB Keyboard (/dev/input/event0)
[  1069.563] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  1069.563] (**) USB Keyboard: Applying InputClass "system-keyboard"
[  1069.563] (II) Using input driver 'evdev' for 'USB Keyboard'
[  1069.563] (**) USB Keyboard: always reports core events
[  1069.563] (**) evdev: USB Keyboard: Device: "/dev/input/event0"
[  1069.563] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x2011
[  1069.564] (--) evdev: USB Keyboard: Found keys
[  1069.564] (II) evdev: USB Keyboard: Configuring as keyboard
[  1069.564] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:04D9:2011.0001/input/input2/event0"
[  1069.564] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 10)
[  1069.564] (**) Option "xkb_rules" "evdev"
[  1069.564] (**) Option "xkb_model" "pc104"
[  1069.564] (**) Option "xkb_layout" "us"
[  1069.564] (**) Option "xkb_variant" "altgr-intl"
[  1069.564] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
[  1069.564] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[  1069.564] (**) USB Keyboard: Applying InputClass "system-keyboard"
[  1069.564] (II) Using input driver 'evdev' for 'USB Keyboard'
[  1069.564] (**) USB Keyboard: always reports core events
[  1069.564] (**) evdev: USB Keyboard: Device: "/dev/input/event1"
[  1069.564] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x2011
[  1069.564] (--) evdev: USB Keyboard: Found keys
[  1069.564] (II) evdev: USB Keyboard: Configuring as keyboard
[  1069.564] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:04D9:2011.0002/input/input3/event1"
[  1069.564] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 11)
[  1069.564] (**) Option "xkb_rules" "evdev"
[  1069.564] (**) Option "xkb_model" "pc104"
[  1069.564] (**) Option "xkb_layout" "us"
[  1069.564] (**) Option "xkb_variant" "altgr-intl"
[  1069.564] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[  1069.564] (II) No input driver specified, ignoring this device.
[  1069.564] (II) This device may have been added with another device file.
[  1069.564] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[  1069.564] (II) No input driver specified, ignoring this device.
[  1069.564] (II) This device may have been added with another device file.
[  1069.564] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[  1069.564] (II) No input driver specified, ignoring this device.
[  1069.564] (II) This device may have been added with another device file.
[  1069.565] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event10)
[  1069.565] (II) No input driver specified, ignoring this device.
[  1069.565] (II) This device may have been added with another device file.
[  1069.565] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event11)
[  1069.565] (II) No input driver specified, ignoring this device.
[  1069.565] (II) This device may have been added with another device file.
[  1069.565] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event12)
[  1069.565] (II) No input driver specified, ignoring this device.
[  1069.565] (II) This device may have been added with another device file.
[  1069.565] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event13)
[  1069.565] (II) No input driver specified, ignoring this device.
[  1069.565] (II) This device may have been added with another device file.
[  1069.565] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[  1069.565] (II) No input driver specified, ignoring this device.
[  1069.565] (II) This device may have been added with another device file.
[  1069.565] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event6)
[  1069.565] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1069.565] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[  1069.565] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[  1069.565] (**) Eee PC WMI hotkeys: always reports core events
[  1069.565] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event6"
[  1069.565] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[  1069.565] (--) evdev: Eee PC WMI hotkeys: Found keys
[  1069.565] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[  1069.565] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input9/event6"
[  1069.565] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[  1069.565] (**) Option "xkb_rules" "evdev"
[  1069.565] (**) Option "xkb_model" "pc104"
[  1069.565] (**) Option "xkb_layout" "us"
[  1069.565] (**) Option "xkb_variant" "altgr-intl"
[  1069.567] (--) NVIDIA(GPU-0): Acer XG270HU (DFP-4): connected
[  1069.568] (--) NVIDIA(GPU-0): Acer XG270HU (DFP-4): Internal DisplayPort
[  1069.568] (--) NVIDIA(GPU-0): Acer XG270HU (DFP-4): 960.0 MHz maximum pixel clock
[  1069.568] (--) NVIDIA(GPU-0):

this looks clean as far as I can tell.

my guess is that the problem is x11glvnd related, is there a way to disable it?

all I can find online is people having problems running steam games, but nothing like this hmm

Last edited by vertex5 (2016-02-13 10:05:12)

Offline

#2 2016-02-13 00:45:17

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [solved] black screen since the nvidia update

What is a graphical session? DM, DE, WM? What are you trying to start and how are you starting it?


Moving to NC...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2016-02-13 00:54:01

vertex5
Member
Registered: 2016-02-13
Posts: 3

Re: [solved] black screen since the nvidia update

stying to start SDDM via 'systemctl start display-manager'

but if I directly start /sbin/X its just a black screen as well

Offline

#4 2016-02-13 01:52:15

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [solved] black screen since the nvidia update

So, this is going to be one of those protracted, painful processes?

What are you starting from SDDM? What is in the journal for SDDM? You don't start X from /sbin/X, you use startx and an .xinitrc: have you tried that? Have you read any of the (numerous) threads on how useless SDDM is and how to fix work around it?

This should be enough to get you going: I don't really have the stomach for this sort of forced extraction...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#5 2016-02-13 03:52:41

sevendogs
Member
From: Texas
Registered: 2016-01-24
Posts: 201

Re: [solved] black screen since the nvidia update

Silly question, but does is your video card supported by 361.28? Nvidia has a list of drivers each card supports. Perhaps you have gone outside the range of your card's supported driver? For example: my GTX560 supports the 361.28 driver but my old GTX285 does not. Just a thought.

"Give a man a truth and he will think for a day. Teach a man to reason and he will think for a lifetime"

Offline

#6 2016-02-13 10:04:38

vertex5
Member
Registered: 2016-02-13
Posts: 3

Re: [solved] black screen since the nvidia update

jasonwryan wrote:

What are you starting from SDDM? What is in the journal for SDDM? You don't start X from /sbin/X, you use startx and an .xinitrc: have you tried that? Have you read any of the (numerous) threads on how useless SDDM is and how to fix work around it?

sorry, I didn't mention these things because I thought it was (only) a driver problem, since everything works when using nouveau, and it worked with the old nvidia driver.
looks like SDDM doesn't work with the driver, if I directly start i3 (via startx / .xinitrc) it seems to be working. since i don't really need SDDM, i'll just do that from now on, consider this solved.

thank you for your help

Offline

#7 2016-02-14 16:32:21

nstgc
Member
Registered: 2014-03-17
Posts: 393

Re: [solved] black screen since the nvidia update

Hmm, I noticed something similar that may be related. My fallback installation of Arch uses Enlightenment and all the windows are black. I can see title bars, the back ground, and the widgets, but the actual content of the windows are just black. I don't know for certain that this is related since I so rarely use a DE for that installation (it's pretty much exclusively for maintenance stuff so it's usage command line only). I was checking it this morning to see how things were going in the land of the GUI.

Maybe related, maybe not. The last time I checked was over a month ago. I've been running updates on my Arch installs round robin style and haven't gotten to my desktop or laptop which are kept up-to-date.

edit: My Desktop does not seem to be affected, but it was updated with pacman -Su. I ran pacman -Syuw a few days ago, and -Syu yesterday on my fall back so it isn't quite as up-to-date.

Last edited by nstgc (2016-02-14 17:09:24)

Offline

#8 2016-02-14 17:26:44

sevendogs
Member
From: Texas
Registered: 2016-01-24
Posts: 201

Re: [solved] black screen since the nvidia update

nstgc wrote:

Hmm, I noticed something similar that may be related. My fallback installation of Arch uses Enlightenment and all the windows are black. I can see title bars, the back ground, and the widgets, but the actual content of the windows are just black. I don't know for certain that this is related since I so rarely use a DE for that installation (it's pretty much exclusively for maintenance stuff so it's usage command line only). I was checking it this morning to see how things were going in the land of the GUI.

Maybe related, maybe not. The last time I checked was over a month ago. I've been running updates on my Arch installs round robin style and haven't gotten to my desktop or laptop which are kept up-to-date.

edit: My Desktop does not seem to be affected, but it was updated with pacman -Su. I ran pacman -Syuw a few days ago, and -Syu yesterday on my fall back so it isn't quite as up-to-date.

Interesting - I was just playing around with enlightenment and got the exact same behaviour on my normal desktop: enlightenment ran fine but any window I opened was just black. I didn't have the time or patience to troubleshoot so dumped e and went back to my go-to DE.

"Give a man a truth and he will think for a day. Teach a man to reason and he will think for a lifetime"

Offline

#9 2016-02-14 19:27:15

nstgc
Member
Registered: 2014-03-17
Posts: 393

Re: [solved] black screen since the nvidia update

Yeah, I don't intend on troubleshooting it either since my preference is Gnome 3 anyway.

Offline

#10 2016-03-19 19:11:44

dmccombs
Member
Registered: 2016-03-19
Posts: 2

Re: [solved] black screen since the nvidia update

For others who find this thread like I did: To fix this, go to Settings -> Composite -> Rendering -> Advanced and uncheck "Texture from pixmap". The trick is doing this without being able to see the window, I couldn't find a way that worked to do so from the command like since vieet errors on me. I basically moved my ~/.e directory, then chose software rendering during the initial wizard so I could see the window and measured with a ruler where the clicks were to swap to software rendering in the Composite dialog, then moved my real .e directory back, measured and made those clicks on the black window so I could see again, then switched back to OpenGL with the "Texture from pixmap" box unchecked to get back to normal.

Offline

#11 2016-04-09 08:52:59

klemmster
Member
Registered: 2011-11-13
Posts: 9

Re: [solved] black screen since the nvidia update

Fixed by disabling 'texture from pixmap' as well. From Command line:

# Decode compositor config
eet -d ~/.e/e/config/standard/e_comp.cfg config /tmp/e_comp.cfg.plain

Change 

value "texture_from_pixmap" uchar: 1;

to 

value "texture_from_pixmap" uchar: 0;

in /tmp/e_comp.cfg.plain

# Update config with new value
eet -e ~/.e/e/config/standard/e_comp.cfg config /tmp/e_comp.cfg.plain 1

Disclaimer: Do you backups; Worked for me.

Offline

Pages: 1

Board footer

Powered by FluxBB