You are not logged in.
Pages: 1
Im trying to configure vulkan properly on an MSI-GS60 with a Haswell and a nvidia 970m graphics cards.
Both vulkaninfo and vulCapsViewer only show info about the intel GPU and not the nvidia GPU, anyone with an optimus laptop able to gather vulkaninfo from both the GPUs?
Offline
What are vulkaninfo and vulCapsViewer, and where did they come from?
Ah, I see vulkaninfo is from the vulkan-validation-layers package, but I can't find vulCapsViewer anywhere.
Last edited by WorMzy (2016-04-17 17:05:23)
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
vulkaninfo is in extra/vulkan-validation-layers. Not sure about the other one.
Offline
vulkanCapsViewer can be found in AUR. link
vulkaninfo is command line to show the vulkan devices available on the system and their characteristics and vulkanCapsViewer does the same thing but graphically.
Last edited by Magbed (2016-04-17 17:43:18)
Offline
Bumblebee doesn't support Vulkan (yet)
See: https://github.com/Bumblebee-Project/Bu … issues/769
TUXEDO Book XC1705 CPU: i7-5700HQ, RAM: DDR3 SO-DIMM 32 GB (4x 8192MB) 1866MHz Crucial Ballistix Sport, Storage: 2x HDD, 2x SSD (= 3.7 TB), GPU: Intel HD, NVIDIA GTX 980M (Bumblebee)
Linux 4.6.3 x86_64
Offline
Pages: 1