You are not logged in.

Pages: 1

#1 2016-05-04 13:55:54

carch
Member
Registered: 2016-05-04
Posts: 5

After update the archlinux, the gnome-session shows with blank screen

After the update by using "pacman -Syu", I find I cannot log into the gnome3 (cannot show gdm window)

it only show
" starting version 229
/dev/sda5: clean, .../... files, .../... blocks "

Update1: Now I find the error is blank screen without errors in Xorg.0.log

however when I  using

 startx -- :1

to open a new xorg in  tty2 and the computer show blank screen, too

I paste the Xorg.1.log (in ~/.local/share/xorg/) here:

[  2598.230] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[  2598.230] X Protocol Version 11, Revision 0
[  2598.230] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[  2598.230] Current Operating System: Linux U305FA 4.5.2-1-ARCH #1 SMP PREEMPT Thu Apr 21 18:21:27 CEST 2016 x86_64
[  2598.230] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=aa8979e6-d226-483e-b343-fa1a405bb8e6 rw quiet
[  2598.230] Build Date: 05 April 2016  05:24:02PM
[  2598.230]  
[  2598.230] Current version of pixman: 0.34.0
[  2598.230]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[  2598.230] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2598.231] (==) Log file: "/home/chxp/.local/share/xorg/Xorg.1.log", Time: Sun May  8 17:45:16 2016
[  2598.231] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2598.231] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2598.231] (==) No Layout section.  Using the first Screen section.
[  2598.231] (==) No screen section available. Using defaults.
[  2598.231] (**) |-->Screen "Default Screen Section" (0)
[  2598.231] (**) |   |-->Monitor "<default monitor>"
[  2598.231] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[  2598.231] (==) Automatically adding devices
[  2598.231] (==) Automatically enabling devices
[  2598.231] (==) Automatically adding GPU devices
[  2598.231] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2598.231] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[  2598.231] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2598.231] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2598.231] (II) Loader magic: 0x819d20
[  2598.231] (II) Module ABI versions:
[  2598.231]     X.Org ANSI C Emulation: 0.4
[  2598.231]     X.Org Video Driver: 20.0
[  2598.231]     X.Org XInput driver : 22.1
[  2598.231]     X.Org Server Extension : 9.0
[  2598.232] (++) using VT number 3

[  2598.232] (--) controlling tty is VT number 3, auto-enabling KeepTty
[  2598.233] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3
[  2598.234] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2598.234] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[  2598.235] (--) PCI:*(0:0:2:0) 8086:161e:1043:181d rev 9, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64
[  2598.235] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2598.235] (II) LoadModule: "glx"
[  2598.236] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2598.237] (II) Module glx: vendor="X.Org Foundation"
[  2598.237]     compiled for 1.18.3, module version = 1.0.0
[  2598.237]     ABI class: X.Org Server Extension, version 9.0
[  2598.237] (==) AIGLX enabled
[  2598.237] (==) Matched intel as autoconfigured driver 0
[  2598.237] (==) Matched intel as autoconfigured driver 1
[  2598.237] (==) Matched modesetting as autoconfigured driver 2
[  2598.237] (==) Matched fbdev as autoconfigured driver 3
[  2598.237] (==) Matched vesa as autoconfigured driver 4
[  2598.237] (==) Assigned the driver to the xf86ConfigLayout
[  2598.237] (II) LoadModule: "intel"
[  2598.237] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  2598.237] (II) Module intel: vendor="X.Org Foundation"
[  2598.237]     compiled for 1.18.3, module version = 2.99.917
[  2598.237]     Module class: X.Org Video Driver
[  2598.237]     ABI class: X.Org Video Driver, version 20.0
[  2598.237] (II) LoadModule: "modesetting"
[  2598.237] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  2598.237] (II) Module modesetting: vendor="X.Org Foundation"
[  2598.237]     compiled for 1.18.3, module version = 1.18.3
[  2598.237]     Module class: X.Org Video Driver
[  2598.237]     ABI class: X.Org Video Driver, version 20.0
[  2598.237] (II) LoadModule: "fbdev"
[  2598.237] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  2598.237] (II) Module fbdev: vendor="X.Org Foundation"
[  2598.237]     compiled for 1.18.0, module version = 0.4.4
[  2598.237]     Module class: X.Org Video Driver
[  2598.237]     ABI class: X.Org Video Driver, version 20.0
[  2598.237] (II) LoadModule: "vesa"
[  2598.237] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  2598.237] (II) Module vesa: vendor="X.Org Foundation"
[  2598.237]     compiled for 1.18.0, module version = 2.3.4
[  2598.237]     Module class: X.Org Video Driver
[  2598.237]     ABI class: X.Org Video Driver, version 20.0
[  2598.237] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[  2598.237] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[  2598.237] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[  2598.237] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[  2598.237] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2598.237] (II) FBDEV: driver for framebuffer: fbdev
[  2598.237] (II) VESA: driver for VESA chipsets: vesa
[  2598.237] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[  2598.237] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151218
[  2598.237] (II) intel(0): SNA compiled from 2.99.917-641-ge4ef6e9
[  2598.237] (WW) Falling back to old probe method for modesetting
[  2598.238] (WW) Falling back to old probe method for fbdev
[  2598.238] (II) Loading sub module "fbdevhw"
[  2598.238] (II) LoadModule: "fbdevhw"
[  2598.238] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  2598.238] (II) Module fbdevhw: vendor="X.Org Foundation"
[  2598.238]     compiled for 1.18.3, module version = 0.0.2
[  2598.238]     ABI class: X.Org Video Driver, version 20.0
[  2598.238] (EE) open /dev/fb0: Permission denied
[  2598.238] (WW) Falling back to old probe method for vesa
[  2598.238] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  2598.238] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 5300
[  2598.238] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[  2598.238] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[  2598.238] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  2598.238] (==) intel(0): RGB weight 888
[  2598.238] (==) intel(0): Default visual is TrueColor
[  2598.238] (II) intel(0): Output eDP1 has no monitor section
[  2598.249] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[  2598.249] (II) intel(0): Enabled output eDP1
[  2598.250] (II) intel(0): Output HDMI1 has no monitor section
[  2598.250] (II) intel(0): Enabled output HDMI1
[  2598.250] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[  2598.250] (II) intel(0): Output VIRTUAL1 has no monitor section
[  2598.250] (II) intel(0): Enabled output VIRTUAL1
[  2598.250] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[  2598.250] (==) intel(0): TearFree disabled
[  2598.250] (==) intel(0): DPI set to (96, 96)
[  2598.250] (II) Loading sub module "dri2"
[  2598.250] (II) LoadModule: "dri2"
[  2598.250] (II) Module "dri2" already built-in
[  2598.250] (II) Loading sub module "present"
[  2598.250] (II) LoadModule: "present"
[  2598.250] (II) Module "present" already built-in
[  2598.250] (II) UnloadModule: "modesetting"
[  2598.250] (II) Unloading modesetting
[  2598.250] (II) UnloadModule: "fbdev"
[  2598.250] (II) Unloading fbdev
[  2598.250] (II) UnloadSubModule: "fbdevhw"
[  2598.250] (II) Unloading fbdevhw
[  2598.250] (II) UnloadModule: "vesa"
[  2598.250] (II) Unloading vesa
[  2598.250] (==) Depth 24 pixmap format is 32 bpp
[  2598.251] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[  2598.251] (==) intel(0): Backing store enabled
[  2598.251] (==) intel(0): Silken mouse enabled
[  2598.251] (II) intel(0): HW Cursor enabled
[  2598.251] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2598.251] (==) intel(0): DPMS enabled
[  2598.251] (==) intel(0): Display hotplug detection enabled
[  2598.251] (II) intel(0): [DRI2] Setup complete
[  2598.251] (II) intel(0): [DRI2]   DRI driver: i965
[  2598.251] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[  2598.251] (II) intel(0): direct rendering: DRI2 enabled
[  2598.251] (II) intel(0): hardware support for Present enabled
[  2598.251] (--) RandR disabled
[  2598.261] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  2598.261] (II) AIGLX: enabled GLX_ARB_create_context
[  2598.261] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  2598.261] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[  2598.261] (II) AIGLX: enabled GLX_INTEL_swap_event
[  2598.261] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  2598.261] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  2598.261] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  2598.261] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[  2598.261] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  2598.261] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  2598.261] (II) AIGLX: Loaded and initialized i965
[  2598.261] (II) GLX: Initialized DRI2 GL provider for screen 0
[  2598.264] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[  2598.264] (II) intel(0): Setting screen physical size to 508 x 285
[  2598.322] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  2598.322] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2598.322] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2598.322] (**) Power Button: Applying InputClass "system-keyboard"
[  2598.322] (II) LoadModule: "libinput"
[  2598.322] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  2598.323] (II) Module libinput: vendor="X.Org Foundation"
[  2598.323]     compiled for 1.18.3, module version = 0.19.0
[  2598.323]     Module class: X.Org XInput Driver
[  2598.323]     ABI class: X.Org XInput driver, version 22.1
[  2598.323] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 12 paused 0
[  2598.323] (II) Using input driver 'libinput' for 'Power Button'
[  2598.323] (**) Power Button: always reports core events
[  2598.323] (**) Option "Device" "/dev/input/event3"
[  2598.323] (**) Option "_source" "server/udev"
[  2598.323] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[  2598.323] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[  2598.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[  2598.323] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2598.323] (**) Option "xkb_layout" "us,cn"
[  2598.323] (**) Option "xkb_variant" ","
[  2598.339] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[  2598.339] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[  2598.340] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[  2598.340] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[  2598.340] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[  2598.340] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[  2598.340] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 15 paused 0
[  2598.340] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[  2598.340] (**) Asus Wireless Radio Control: always reports core events
[  2598.340] (**) Option "Device" "/dev/input/event4"
[  2598.340] (**) Option "_source" "server/udev"
[  2598.340] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[  2598.340] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[  2598.341] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input8/event4"
[  2598.341] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[  2598.341] (**) Option "xkb_layout" "us,cn"
[  2598.341] (**) Option "xkb_variant" ","
[  2598.341] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[  2598.341] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[  2598.341] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[  2598.341] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2598.341] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  2598.341] (**) Video Bus: Applying InputClass "system-keyboard"
[  2598.342] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 16 paused 0
[  2598.342] (II) Using input driver 'libinput' for 'Video Bus'
[  2598.342] (**) Video Bus: always reports core events
[  2598.342] (**) Option "Device" "/dev/input/event10"
[  2598.342] (**) Option "_source" "server/udev"
[  2598.342] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[  2598.342] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[  2598.342] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18/event10"
[  2598.342] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  2598.342] (**) Option "xkb_layout" "us,cn"
[  2598.342] (**) Option "xkb_variant" ","
[  2598.342] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[  2598.342] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[  2598.343] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  2598.343] (II) No input driver specified, ignoring this device.
[  2598.343] (II) This device may have been added with another device file.
[  2598.343] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  2598.343] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  2598.343] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  2598.343] (**) Sleep Button: Applying InputClass "system-keyboard"
[  2598.343] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 17 paused 0
[  2598.343] (II) Using input driver 'libinput' for 'Sleep Button'
[  2598.343] (**) Sleep Button: always reports core events
[  2598.343] (**) Option "Device" "/dev/input/event2"
[  2598.343] (**) Option "_source" "server/udev"
[  2598.344] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[  2598.344] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[  2598.344] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[  2598.344] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  2598.344] (**) Option "xkb_layout" "us,cn"
[  2598.344] (**) Option "xkb_variant" ","
[  2598.344] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[  2598.344] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[  2598.344] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[  2598.344] (II) No input driver specified, ignoring this device.
[  2598.344] (II) This device may have been added with another device file.
[  2598.344] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[  2598.344] (II) No input driver specified, ignoring this device.
[  2598.344] (II) This device may have been added with another device file.
[  2598.345] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[  2598.345] (II) No input driver specified, ignoring this device.
[  2598.345] (II) This device may have been added with another device file.
[  2598.345] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event11)
[  2598.345] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[  2598.345] (**) USB2.0 UVC HD Webcam: Applying InputClass "libinput keyboard catchall"
[  2598.345] (**) USB2.0 UVC HD Webcam: Applying InputClass "system-keyboard"
[  2598.345] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 18 paused 0
[  2598.345] (II) Using input driver 'libinput' for 'USB2.0 UVC HD Webcam'
[  2598.345] (**) USB2.0 UVC HD Webcam: always reports core events
[  2598.345] (**) Option "Device" "/dev/input/event11"
[  2598.345] (**) Option "_source" "server/udev"
[  2598.345] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event11 is tagged by udev as: Keyboard
[  2598.345] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event11 is a keyboard
[  2598.345] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19/event11"
[  2598.345] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 10)
[  2598.345] (**) Option "xkb_layout" "us,cn"
[  2598.345] (**) Option "xkb_variant" ","
[  2598.346] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event11 is tagged by udev as: Keyboard
[  2598.346] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event11 is a keyboard
[  2598.346] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[  2598.346] (II) No input driver specified, ignoring this device.
[  2598.346] (II) This device may have been added with another device file.
[  2598.346] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[  2598.346] (II) No input driver specified, ignoring this device.
[  2598.346] (II) This device may have been added with another device file.
[  2598.346] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[  2598.346] (II) No input driver specified, ignoring this device.
[  2598.346] (II) This device may have been added with another device file.
[  2598.347] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[  2598.347] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  2598.347] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  2598.347] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[  2598.347] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 19 paused 0
[  2598.347] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[  2598.347] (**) Asus WMI hotkeys: always reports core events
[  2598.347] (**) Option "Device" "/dev/input/event9"
[  2598.347] (**) Option "_source" "server/udev"
[  2598.347] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[  2598.347] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is a keyboard
[  2598.347] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input17/event9"
[  2598.347] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[  2598.347] (**) Option "xkb_layout" "us,cn"
[  2598.347] (**) Option "xkb_variant" ","
[  2598.347] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[  2598.347] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is a keyboard
[  2598.348] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  2598.348] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  2598.348] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  2598.348] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[  2598.348] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 0
[  2598.348] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  2598.348] (**) AT Translated Set 2 keyboard: always reports core events
[  2598.348] (**) Option "Device" "/dev/input/event0"
[  2598.348] (**) Option "_source" "server/udev"
[  2598.348] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  2598.348] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  2598.348] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  2598.348] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[  2598.348] (**) Option "xkb_layout" "us,cn"
[  2598.348] (**) Option "xkb_variant" ","
[  2598.348] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  2598.348] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  2598.349] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchscreen catchall"
[  2598.349] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 21 paused 0
[  2598.349] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[  2598.349] (**) ETPS/2 Elantech Touchpad: always reports core events
[  2598.349] (**) Option "Device" "/dev/input/event12"
[  2598.349] (**) Option "_source" "server/udev"
[  2598.349] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is tagged by udev as: Touchpad Touchscreen
[  2598.349] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is a touchpad
[  2598.349] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input16/event12"
[  2598.349] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[  2598.349] (**) Option "AccelerationScheme" "none"
[  2598.349] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[  2598.349] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[  2598.349] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[  2598.350] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is tagged by udev as: Touchpad Touchscreen
[  2598.350] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is a touchpad
[  2598.350] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[  2598.350] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[  2598.350] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[  2598.350] (II) No input driver specified, ignoring this device.
[  2598.350] (II) This device may have been added with another device file.
[  2598.533] (II) intel(0): EDID vendor "AUO", prod id 8493
[  2598.533] (II) intel(0): Printing DDC gathered Modelines:
[  2598.533] (II) intel(0): Modeline "1920x1080"x0.0  138.53  1920 1968 2000 2080  1080 1088 1102 1110 -hsync -vsync (66.6 kHz eP)
[  2604.859] (**) Option "fd" "12"
[  2604.859] (**) Option "fd" "15"
[  2604.860] (**) Option "fd" "16"
[  2604.860] (**) Option "fd" "17"
[  2604.860] (**) Option "fd" "18"
[  2604.860] (**) Option "fd" "19"
[  2604.861] (**) Option "fd" "20"
[  2604.861] (**) Option "fd" "21"
[  2604.861] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2604.990] (II) systemd-logind: got pause for 13:76
[  2604.990] (II) systemd-logind: got pause for 13:66
[  2604.990] (II) systemd-logind: got pause for 13:73
[  2604.990] (II) systemd-logind: got pause for 13:75
[  2604.990] (II) systemd-logind: got pause for 13:74
[  2604.990] (II) systemd-logind: got pause for 13:64
[  2604.990] (II) systemd-logind: got pause for 13:68
[  2604.990] (II) systemd-logind: got pause for 13:67
[  2604.990] (II) systemd-logind: got pause for 226:0
[  2611.445] (II) UnloadModule: "libinput"
[  2611.446] (II) systemd-logind: releasing fd for 13:76
[  2611.496] (II) UnloadModule: "libinput"
[  2611.496] (II) systemd-logind: releasing fd for 13:64
[  2611.556] (II) UnloadModule: "libinput"
[  2611.556] (II) systemd-logind: releasing fd for 13:73
[  2611.616] (II) UnloadModule: "libinput"
[  2611.616] (II) systemd-logind: releasing fd for 13:75
[  2611.660] (II) UnloadModule: "libinput"
[  2611.660] (II) systemd-logind: releasing fd for 13:66
[  2611.696] (II) UnloadModule: "libinput"
[  2611.696] (II) systemd-logind: releasing fd for 13:74
[  2611.729] (II) UnloadModule: "libinput"
[  2611.730] (II) systemd-logind: releasing fd for 13:68
[  2611.756] (II) UnloadModule: "libinput"
[  2611.756] (II) systemd-logind: releasing fd for 13:67
[  2611.799] (II) Server terminated successfully (0). Closing log file.

UPDATE2:
I can use twn with the command here:

twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec xterm -geometry 80x66+0+0 -name login

And also I can use:

export XDG_CURRENT_DESKTOP=GNOME-Classic:GNOME
export GNOME_SHELL_SESSION_MODE=classic
exec gnome-session --session=gnome-classic

it can log into a gnome desktop and several icons in desktop, i can open the Home fold, however no gnome menu, no dash and I cannot control the widow size.


UPDATE3:
Finally I moved to the KDE desktop...
It works fine and it may take me sometime to adjust.
Maybe the next update of gnome will overcome the bug.


Thanks for your help

Last edited by carch (2016-05-10 12:31:35)

Offline

#2 2016-05-04 13:58:50

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,456
Website

Re: After update the archlinux, the gnome-session shows with blank screen

Either that's not your current xorg log, or you are not up to date.  It says it's running on kernel 4.4.1 but 4.5.1 is the current in the repos (even lts is newer than 4.4.1).

Can you start x manually (with startx)?

Is there anything in you journal?  Or systemctl status gdm?

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#3 2016-05-04 15:22:26

carch
Member
Registered: 2016-05-04
Posts: 5

Re: After update the archlinux, the gnome-session shows with blank screen

I have start x by using 

sudo startx

And I find the Xorg.0.log turn to:

_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
(EE) 
Fatal server error:
(EE) Cannot establish any listening sockets - Make sure an X server isn't already running(EE) 
(EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE) 
(EE) Server terminated with error (1). Closing log file.
Invalid MIT-MAGIC-COOKIE-1 keyxinit: giving up
xinit: unable to connect to X server: Resource temporarily unavailable
xinit: server error

then I reboot the computer and the new Xorg.0.log is kept.

I find I maybe paste the wrong Xorg.0.log for it may not update, my system is 

uname -a
Linux U305FA 4.5.1-1-ARCH #1 SMP PREEMPT Thr Apr 14 19:19:32 CEST 2016 X86_64 GNU/Linux
Trilby wrote:

Either that's not your current xorg log, or you are not up to date.  It says it's running on kernel 4.4.1 but 4.5.1 is the current in the repos (even lts is newer than 4.4.1).

Can you start x manually (with startx)?

Is there anything in you journal?  Or systemctl status gdm?

Offline

#4 2016-05-04 15:35:28

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,456
Website

Re: After update the archlinux, the gnome-session shows with blank screen

carch wrote:

I have start x by using 

sudo startx

Don't do that.  Follow the documentation:
https://wiki.archlinux.org/index.php/Xinitrc#Running

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#5 2016-05-08 10:39:28

carch
Member
Registered: 2016-05-04
Posts: 5

Re: After update the archlinux, the gnome-session shows with blank screen

I using 

 startx -- :1

and the computer show blank screen

I paste the Xorg.1.log (in ~/.local/share/xorg/) here:

[  2598.230] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[  2598.230] X Protocol Version 11, Revision 0
[  2598.230] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[  2598.230] Current Operating System: Linux U305FA 4.5.2-1-ARCH #1 SMP PREEMPT Thu Apr 21 18:21:27 CEST 2016 x86_64
[  2598.230] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=aa8979e6-d226-483e-b343-fa1a405bb8e6 rw quiet
[  2598.230] Build Date: 05 April 2016  05:24:02PM
[  2598.230]  
[  2598.230] Current version of pixman: 0.34.0
[  2598.230] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2598.230] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2598.231] (==) Log file: "/home/chxp/.local/share/xorg/Xorg.1.log", Time: Sun May  8 17:45:16 2016
[  2598.231] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2598.231] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2598.231] (==) No Layout section.  Using the first Screen section.
[  2598.231] (==) No screen section available. Using defaults.
[  2598.231] (**) |-->Screen "Default Screen Section" (0)
[  2598.231] (**) |   |-->Monitor "<default monitor>"
[  2598.231] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  2598.231] (==) Automatically adding devices
[  2598.231] (==) Automatically enabling devices
[  2598.231] (==) Automatically adding GPU devices
[  2598.231] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2598.231] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[  2598.231] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2598.231] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2598.231] (II) Loader magic: 0x819d20
[  2598.231] (II) Module ABI versions:
[  2598.231] 	X.Org ANSI C Emulation: 0.4
[  2598.231] 	X.Org Video Driver: 20.0
[  2598.231] 	X.Org XInput driver : 22.1
[  2598.231] 	X.Org Server Extension : 9.0
[  2598.232] (++) using VT number 3

[  2598.232] (--) controlling tty is VT number 3, auto-enabling KeepTty
[  2598.233] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3
[  2598.234] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2598.234] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[  2598.235] (--) PCI:*(0:0:2:0) 8086:161e:1043:181d rev 9, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64
[  2598.235] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2598.235] (II) LoadModule: "glx"
[  2598.236] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2598.237] (II) Module glx: vendor="X.Org Foundation"
[  2598.237] 	compiled for 1.18.3, module version = 1.0.0
[  2598.237] 	ABI class: X.Org Server Extension, version 9.0
[  2598.237] (==) AIGLX enabled
[  2598.237] (==) Matched intel as autoconfigured driver 0
[  2598.237] (==) Matched intel as autoconfigured driver 1
[  2598.237] (==) Matched modesetting as autoconfigured driver 2
[  2598.237] (==) Matched fbdev as autoconfigured driver 3
[  2598.237] (==) Matched vesa as autoconfigured driver 4
[  2598.237] (==) Assigned the driver to the xf86ConfigLayout
[  2598.237] (II) LoadModule: "intel"
[  2598.237] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  2598.237] (II) Module intel: vendor="X.Org Foundation"
[  2598.237] 	compiled for 1.18.3, module version = 2.99.917
[  2598.237] 	Module class: X.Org Video Driver
[  2598.237] 	ABI class: X.Org Video Driver, version 20.0
[  2598.237] (II) LoadModule: "modesetting"
[  2598.237] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  2598.237] (II) Module modesetting: vendor="X.Org Foundation"
[  2598.237] 	compiled for 1.18.3, module version = 1.18.3
[  2598.237] 	Module class: X.Org Video Driver
[  2598.237] 	ABI class: X.Org Video Driver, version 20.0
[  2598.237] (II) LoadModule: "fbdev"
[  2598.237] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  2598.237] (II) Module fbdev: vendor="X.Org Foundation"
[  2598.237] 	compiled for 1.18.0, module version = 0.4.4
[  2598.237] 	Module class: X.Org Video Driver
[  2598.237] 	ABI class: X.Org Video Driver, version 20.0
[  2598.237] (II) LoadModule: "vesa"
[  2598.237] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  2598.237] (II) Module vesa: vendor="X.Org Foundation"
[  2598.237] 	compiled for 1.18.0, module version = 2.3.4
[  2598.237] 	Module class: X.Org Video Driver
[  2598.237] 	ABI class: X.Org Video Driver, version 20.0
[  2598.237] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[  2598.237] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[  2598.237] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[  2598.237] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[  2598.237] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2598.237] (II) FBDEV: driver for framebuffer: fbdev
[  2598.237] (II) VESA: driver for VESA chipsets: vesa
[  2598.237] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[  2598.237] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151218
[  2598.237] (II) intel(0): SNA compiled from 2.99.917-641-ge4ef6e9
[  2598.237] (WW) Falling back to old probe method for modesetting
[  2598.238] (WW) Falling back to old probe method for fbdev
[  2598.238] (II) Loading sub module "fbdevhw"
[  2598.238] (II) LoadModule: "fbdevhw"
[  2598.238] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  2598.238] (II) Module fbdevhw: vendor="X.Org Foundation"
[  2598.238] 	compiled for 1.18.3, module version = 0.0.2
[  2598.238] 	ABI class: X.Org Video Driver, version 20.0
[  2598.238] (EE) open /dev/fb0: Permission denied
[  2598.238] (WW) Falling back to old probe method for vesa
[  2598.238] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  2598.238] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 5300
[  2598.238] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[  2598.238] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  2598.238] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  2598.238] (==) intel(0): RGB weight 888
[  2598.238] (==) intel(0): Default visual is TrueColor
[  2598.238] (II) intel(0): Output eDP1 has no monitor section
[  2598.249] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[  2598.249] (II) intel(0): Enabled output eDP1
[  2598.250] (II) intel(0): Output HDMI1 has no monitor section
[  2598.250] (II) intel(0): Enabled output HDMI1
[  2598.250] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[  2598.250] (II) intel(0): Output VIRTUAL1 has no monitor section
[  2598.250] (II) intel(0): Enabled output VIRTUAL1
[  2598.250] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[  2598.250] (==) intel(0): TearFree disabled
[  2598.250] (==) intel(0): DPI set to (96, 96)
[  2598.250] (II) Loading sub module "dri2"
[  2598.250] (II) LoadModule: "dri2"
[  2598.250] (II) Module "dri2" already built-in
[  2598.250] (II) Loading sub module "present"
[  2598.250] (II) LoadModule: "present"
[  2598.250] (II) Module "present" already built-in
[  2598.250] (II) UnloadModule: "modesetting"
[  2598.250] (II) Unloading modesetting
[  2598.250] (II) UnloadModule: "fbdev"
[  2598.250] (II) Unloading fbdev
[  2598.250] (II) UnloadSubModule: "fbdevhw"
[  2598.250] (II) Unloading fbdevhw
[  2598.250] (II) UnloadModule: "vesa"
[  2598.250] (II) Unloading vesa
[  2598.250] (==) Depth 24 pixmap format is 32 bpp
[  2598.251] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[  2598.251] (==) intel(0): Backing store enabled
[  2598.251] (==) intel(0): Silken mouse enabled
[  2598.251] (II) intel(0): HW Cursor enabled
[  2598.251] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2598.251] (==) intel(0): DPMS enabled
[  2598.251] (==) intel(0): Display hotplug detection enabled
[  2598.251] (II) intel(0): [DRI2] Setup complete
[  2598.251] (II) intel(0): [DRI2]   DRI driver: i965
[  2598.251] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[  2598.251] (II) intel(0): direct rendering: DRI2 enabled
[  2598.251] (II) intel(0): hardware support for Present enabled
[  2598.251] (--) RandR disabled
[  2598.261] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  2598.261] (II) AIGLX: enabled GLX_ARB_create_context
[  2598.261] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  2598.261] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[  2598.261] (II) AIGLX: enabled GLX_INTEL_swap_event
[  2598.261] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  2598.261] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  2598.261] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  2598.261] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[  2598.261] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  2598.261] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  2598.261] (II) AIGLX: Loaded and initialized i965
[  2598.261] (II) GLX: Initialized DRI2 GL provider for screen 0
[  2598.264] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[  2598.264] (II) intel(0): Setting screen physical size to 508 x 285
[  2598.322] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  2598.322] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2598.322] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2598.322] (**) Power Button: Applying InputClass "system-keyboard"
[  2598.322] (II) LoadModule: "libinput"
[  2598.322] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  2598.323] (II) Module libinput: vendor="X.Org Foundation"
[  2598.323] 	compiled for 1.18.3, module version = 0.19.0
[  2598.323] 	Module class: X.Org XInput Driver
[  2598.323] 	ABI class: X.Org XInput driver, version 22.1
[  2598.323] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 12 paused 0
[  2598.323] (II) Using input driver 'libinput' for 'Power Button'
[  2598.323] (**) Power Button: always reports core events
[  2598.323] (**) Option "Device" "/dev/input/event3"
[  2598.323] (**) Option "_source" "server/udev"
[  2598.323] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[  2598.323] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[  2598.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[  2598.323] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2598.323] (**) Option "xkb_layout" "us,cn"
[  2598.323] (**) Option "xkb_variant" ","
[  2598.339] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[  2598.339] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[  2598.340] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[  2598.340] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[  2598.340] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[  2598.340] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[  2598.340] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 15 paused 0
[  2598.340] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[  2598.340] (**) Asus Wireless Radio Control: always reports core events
[  2598.340] (**) Option "Device" "/dev/input/event4"
[  2598.340] (**) Option "_source" "server/udev"
[  2598.340] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[  2598.340] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[  2598.341] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input8/event4"
[  2598.341] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[  2598.341] (**) Option "xkb_layout" "us,cn"
[  2598.341] (**) Option "xkb_variant" ","
[  2598.341] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[  2598.341] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[  2598.341] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[  2598.341] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2598.341] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  2598.341] (**) Video Bus: Applying InputClass "system-keyboard"
[  2598.342] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 16 paused 0
[  2598.342] (II) Using input driver 'libinput' for 'Video Bus'
[  2598.342] (**) Video Bus: always reports core events
[  2598.342] (**) Option "Device" "/dev/input/event10"
[  2598.342] (**) Option "_source" "server/udev"
[  2598.342] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[  2598.342] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[  2598.342] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18/event10"
[  2598.342] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  2598.342] (**) Option "xkb_layout" "us,cn"
[  2598.342] (**) Option "xkb_variant" ","
[  2598.342] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[  2598.342] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[  2598.343] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  2598.343] (II) No input driver specified, ignoring this device.
[  2598.343] (II) This device may have been added with another device file.
[  2598.343] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  2598.343] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  2598.343] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  2598.343] (**) Sleep Button: Applying InputClass "system-keyboard"
[  2598.343] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 17 paused 0
[  2598.343] (II) Using input driver 'libinput' for 'Sleep Button'
[  2598.343] (**) Sleep Button: always reports core events
[  2598.343] (**) Option "Device" "/dev/input/event2"
[  2598.343] (**) Option "_source" "server/udev"
[  2598.344] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[  2598.344] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[  2598.344] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[  2598.344] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  2598.344] (**) Option "xkb_layout" "us,cn"
[  2598.344] (**) Option "xkb_variant" ","
[  2598.344] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[  2598.344] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[  2598.344] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[  2598.344] (II) No input driver specified, ignoring this device.
[  2598.344] (II) This device may have been added with another device file.
[  2598.344] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[  2598.344] (II) No input driver specified, ignoring this device.
[  2598.344] (II) This device may have been added with another device file.
[  2598.345] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[  2598.345] (II) No input driver specified, ignoring this device.
[  2598.345] (II) This device may have been added with another device file.
[  2598.345] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event11)
[  2598.345] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[  2598.345] (**) USB2.0 UVC HD Webcam: Applying InputClass "libinput keyboard catchall"
[  2598.345] (**) USB2.0 UVC HD Webcam: Applying InputClass "system-keyboard"
[  2598.345] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 18 paused 0
[  2598.345] (II) Using input driver 'libinput' for 'USB2.0 UVC HD Webcam'
[  2598.345] (**) USB2.0 UVC HD Webcam: always reports core events
[  2598.345] (**) Option "Device" "/dev/input/event11"
[  2598.345] (**) Option "_source" "server/udev"
[  2598.345] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event11 is tagged by udev as: Keyboard
[  2598.345] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event11 is a keyboard
[  2598.345] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19/event11"
[  2598.345] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 10)
[  2598.345] (**) Option "xkb_layout" "us,cn"
[  2598.345] (**) Option "xkb_variant" ","
[  2598.346] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event11 is tagged by udev as: Keyboard
[  2598.346] (II) input device 'USB2.0 UVC HD Webcam', /dev/input/event11 is a keyboard
[  2598.346] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[  2598.346] (II) No input driver specified, ignoring this device.
[  2598.346] (II) This device may have been added with another device file.
[  2598.346] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[  2598.346] (II) No input driver specified, ignoring this device.
[  2598.346] (II) This device may have been added with another device file.
[  2598.346] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[  2598.346] (II) No input driver specified, ignoring this device.
[  2598.346] (II) This device may have been added with another device file.
[  2598.347] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[  2598.347] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  2598.347] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  2598.347] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[  2598.347] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 19 paused 0
[  2598.347] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[  2598.347] (**) Asus WMI hotkeys: always reports core events
[  2598.347] (**) Option "Device" "/dev/input/event9"
[  2598.347] (**) Option "_source" "server/udev"
[  2598.347] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[  2598.347] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is a keyboard
[  2598.347] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input17/event9"
[  2598.347] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[  2598.347] (**) Option "xkb_layout" "us,cn"
[  2598.347] (**) Option "xkb_variant" ","
[  2598.347] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[  2598.347] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is a keyboard
[  2598.348] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  2598.348] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  2598.348] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  2598.348] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[  2598.348] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 0
[  2598.348] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  2598.348] (**) AT Translated Set 2 keyboard: always reports core events
[  2598.348] (**) Option "Device" "/dev/input/event0"
[  2598.348] (**) Option "_source" "server/udev"
[  2598.348] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  2598.348] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  2598.348] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  2598.348] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[  2598.348] (**) Option "xkb_layout" "us,cn"
[  2598.348] (**) Option "xkb_variant" ","
[  2598.348] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  2598.348] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  2598.349] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[  2598.349] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchscreen catchall"
[  2598.349] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 21 paused 0
[  2598.349] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[  2598.349] (**) ETPS/2 Elantech Touchpad: always reports core events
[  2598.349] (**) Option "Device" "/dev/input/event12"
[  2598.349] (**) Option "_source" "server/udev"
[  2598.349] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is tagged by udev as: Touchpad Touchscreen
[  2598.349] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is a touchpad
[  2598.349] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input16/event12"
[  2598.349] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[  2598.349] (**) Option "AccelerationScheme" "none"
[  2598.349] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[  2598.349] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[  2598.349] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[  2598.350] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is tagged by udev as: Touchpad Touchscreen
[  2598.350] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is a touchpad
[  2598.350] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[  2598.350] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[  2598.350] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[  2598.350] (II) No input driver specified, ignoring this device.
[  2598.350] (II) This device may have been added with another device file.
[  2598.533] (II) intel(0): EDID vendor "AUO", prod id 8493
[  2598.533] (II) intel(0): Printing DDC gathered Modelines:
[  2598.533] (II) intel(0): Modeline "1920x1080"x0.0  138.53  1920 1968 2000 2080  1080 1088 1102 1110 -hsync -vsync (66.6 kHz eP)
[  2604.859] (**) Option "fd" "12"
[  2604.859] (**) Option "fd" "15"
[  2604.860] (**) Option "fd" "16"
[  2604.860] (**) Option "fd" "17"
[  2604.860] (**) Option "fd" "18"
[  2604.860] (**) Option "fd" "19"
[  2604.861] (**) Option "fd" "20"
[  2604.861] (**) Option "fd" "21"
[  2604.861] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2604.990] (II) systemd-logind: got pause for 13:76
[  2604.990] (II) systemd-logind: got pause for 13:66
[  2604.990] (II) systemd-logind: got pause for 13:73
[  2604.990] (II) systemd-logind: got pause for 13:75
[  2604.990] (II) systemd-logind: got pause for 13:74
[  2604.990] (II) systemd-logind: got pause for 13:64
[  2604.990] (II) systemd-logind: got pause for 13:68
[  2604.990] (II) systemd-logind: got pause for 13:67
[  2604.990] (II) systemd-logind: got pause for 226:0
[  2611.445] (II) UnloadModule: "libinput"
[  2611.446] (II) systemd-logind: releasing fd for 13:76
[  2611.496] (II) UnloadModule: "libinput"
[  2611.496] (II) systemd-logind: releasing fd for 13:64
[  2611.556] (II) UnloadModule: "libinput"
[  2611.556] (II) systemd-logind: releasing fd for 13:73
[  2611.616] (II) UnloadModule: "libinput"
[  2611.616] (II) systemd-logind: releasing fd for 13:75
[  2611.660] (II) UnloadModule: "libinput"
[  2611.660] (II) systemd-logind: releasing fd for 13:66
[  2611.696] (II) UnloadModule: "libinput"
[  2611.696] (II) systemd-logind: releasing fd for 13:74
[  2611.729] (II) UnloadModule: "libinput"
[  2611.730] (II) systemd-logind: releasing fd for 13:68
[  2611.756] (II) UnloadModule: "libinput"
[  2611.756] (II) systemd-logind: releasing fd for 13:67
[  2611.799] (II) Server terminated successfully (0). Closing log file.

What happened ? Thanks.

PS: I have updated my question.

Trilby wrote:
carch wrote:

I have start x by using 

sudo startx

Don't do that.  Follow the documentation:
https://wiki.archlinux.org/index.php/Xinitrc#Running

Last edited by carch (2016-05-08 10:47:05)

Offline

#6 2016-05-08 12:13:07

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,456
Website

Re: After update the archlinux, the gnome-session shows with blank screen

It looks like X runs for 6 seconds then exits successfully.  Did you exit X, or what did you see when you ran startx?  What is in your ~/.xinitrc?

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#7 2016-05-08 15:08:48

carch
Member
Registered: 2016-05-04
Posts: 5

Re: After update the archlinux, the gnome-session shows with blank screen

I quit X manually for that only black screen exist and no gdm window, no mouse cursor.

The case exists for long time and no 6 seconds.

my .xinitrc is here:

 exec gnome-session
Trilby wrote:

It looks like X runs for 6 seconds then exits successfully.  Did you exit X, or what did you see when you ran startx?  What is in your ~/.xinitrc?

Last edited by carch (2016-05-08 15:09:01)

Offline

Pages: 1

Board footer

Powered by FluxBB