Arch Linux

Scriptor

Member

Registered: 2011-01-16

Posts: 144

ACPI Error

Hello,

After checking my dmesg due to a small(~1sec) freeze, I saw this error:

[   52.166743] ata5.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen
[   52.166745] ata5.00: irq_stat 0x08000002, interface fatal error
[   52.166746] ata5: SError: { Proto }
[   52.166750] ata5.00: cmd a0/00:00:00:02:00/00:00:00:00:00/a0 tag 1 pio 16388 in
                        opcode=0x43 43 02 05 00 00 00 00 00 02 00res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)
[   52.166751] ata5.00: status: { DRDY }
[   52.166753] ata5: hard resetting link
[   52.476402] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   52.478027] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
[   52.478031] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802360e2460), AE_NOT_FOUND (20160108/psparse-542)
[   52.480289] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
[   52.480292] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802360e2460), AE_NOT_FOUND (20160108/psparse-542)
[   52.480298] ata5.00: configured for UDMA/133
[   52.481488] ata5: EH complete

After checking on the internet, I didn't find anything related to ata5. I saw how to convert from ata to dev, but only ata6 and ata1 gave a result.

So, should I be alarmed ?

Thank you very much in advance