You are not logged in.
I have a thinkpad t500 with memory card reader, but when I insert an sdcard nothing happens. The sdcard works on an usb card reader and in the camera. I have also tried with another sdcard. The card reader used to work under debian before I switched to arch half a year ago. There is no /dev/mmc* device. It doesnt show under gnome-disks or fdisk -l.
Any help would be highly appreciated.
$lspci -nn | grep SD:
15:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21)
$uname -a:
Linux asdf 4.5.4-1-ARCH #1 SMP PREEMPT Wed May 11 22:21:28 CEST 2016 x86_64 GNU/Linux
$dmesg:
[261151.906679] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[261154.566198] mmc0: new high speed SDHC card at address e624
$lshw:
*-generic:0
description: SD Host controller
product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
vendor: Ricoh Co Ltd
physical id: 0.2
bus info: pci@0000:15:00.2
version: 21
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=sdhci-pci latency=32
resources: irq:18 memory:f4401800-f44018ff
Last edited by asdf (2016-06-13 22:20:17)
Offline
After a reboot it works again. There must have been some update in the meantime I completely forgot about ...
Sorry.
Offline
Please edit your first post and prepend [Solved] to the title[1].
R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K
Offline