You are not logged in.

#1 2016-08-06 08:54:45

andy_0
Member
Registered: 2013-04-10
Posts: 15

Computer suspend to RAM when monitor is turned on

Hey folks,

for a couple of days now I have a strange issue. Every time I leave home (or do something else for a while) I turn off the TV. When I turn on the TV my Arch installation suspends to RAM. I tested it today and it is time independent meaning as soon as the TV is I turned on no matter how long it was turned off the computer activates the suspend procedure. I deactivated the complete Power Management in KDE system settings which doesn't solve the problem. I tried using Cinnamon and this makes it even more strange. As soon as I log into Cinnamon from lightdm the computer goes into suspend to RAM is is immediately activated again ...

Computer information:
Notebook: Lenovo T420, using a docking station
OS: up to date Arch Linux
GUI: KDE Plasma
Display Manager: lightdm
Monitor: Sony KDL-55W805b TV, connected to DVI port on docking station because I had troubles with HDMI

As far as I can tell the systemd log does not contain any of interest but added it anyway. I started with the last log entries before the issue occurs today at night and stop as soon as the last "suspend" entry is finished in the log.

Aug 06 00:13:01 NB-Andy plasmashell[679]: libkcups: Create-Printer-Subscriptions last error: 1282 Ungültiger Dateideskriptor
Aug 06 00:13:01 NB-Andy plasmashell[679]: libkcups: Request failed 1282 -1
Aug 06 01:05:14 NB-Andy systemd-logind[317]: Suspending...
Aug 06 01:05:14 NB-Andy NetworkManager[337]: <info>  [1470438314.6958] manager: sleep requested (sleeping: no  enabled: yes)
Aug 06 01:05:14 NB-Andy kdeinit5[611]: bluedevil: About to suspend
Aug 06 01:05:14 NB-Andy NetworkManager[337]: <info>  [1470438314.6958] manager: sleeping...
Aug 06 01:05:14 NB-Andy NetworkManager[337]: <info>  [1470438314.6960] device (wlp3s0): state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Aug 06 01:05:14 NB-Andy NetworkManager[337]: <info>  [1470438314.6967] manager: NetworkManager state is now ASLEEP
Aug 06 01:05:14 NB-Andy systemd[1]: Reached target Sleep.
Aug 06 01:05:14 NB-Andy systemd[1]: Starting Suspend...
Aug 06 01:05:14 NB-Andy systemd-sleep[19481]: Suspending system...
Aug 06 01:05:14 NB-Andy kernel: PM: Syncing filesystems ... done.
Aug 06 01:05:14 NB-Andy kernel: PM: Preparing system for sleep (mem)
Aug 06 01:05:25 NB-Andy kernel: Freezing user space processes ... (elapsed 0.096 seconds) done.
Aug 06 01:05:25 NB-Andy kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Aug 06 01:05:25 NB-Andy kernel: PM: Suspending system (mem)
Aug 06 01:05:25 NB-Andy kernel: Suspending console(s) (use no_console_suspend to debug)
Aug 06 01:05:25 NB-Andy kernel: sd 4:0:0:0: [sdb] Synchronizing SCSI cache
Aug 06 01:05:25 NB-Andy kernel: sd 4:0:0:0: [sdb] Stopping disk
Aug 06 01:05:25 NB-Andy kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Aug 06 01:05:25 NB-Andy kernel: sd 0:0:0:0: [sda] Stopping disk
Aug 06 01:05:25 NB-Andy kernel: e1000e: EEE TX LPI TIMER: 00000011
Aug 06 01:05:25 NB-Andy kernel: PM: suspend of devices complete after 992.481 msecs
Aug 06 01:05:25 NB-Andy kernel: PM: late suspend of devices complete after 12.835 msecs
Aug 06 01:05:25 NB-Andy kernel: ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
Aug 06 01:05:25 NB-Andy kernel: ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
Aug 06 01:05:25 NB-Andy kernel: e1000e 0000:00:19.0: System wakeup enabled by ACPI
Aug 06 01:05:25 NB-Andy kernel: PM: noirq suspend of devices complete after 16.607 msecs
Aug 06 01:05:25 NB-Andy kernel: ACPI: Preparing to enter system sleep state S3
Aug 06 01:05:25 NB-Andy kernel: ACPI : EC: EC stopped
Aug 06 01:05:25 NB-Andy kernel: PM: Saving platform NVS memory
Aug 06 01:05:25 NB-Andy kernel: Disabling non-boot CPUs ...
Aug 06 01:05:25 NB-Andy kernel: smpboot: CPU 1 is now offline
Aug 06 01:05:25 NB-Andy kernel: smpboot: CPU 2 is now offline
Aug 06 01:05:25 NB-Andy kernel: smpboot: CPU 3 is now offline
Aug 06 01:05:25 NB-Andy kernel: ACPI: Low-level resume complete
Aug 06 01:05:25 NB-Andy kernel: ACPI : EC: EC started
Aug 06 01:05:25 NB-Andy kernel: PM: Restoring platform NVS memory
Aug 06 01:05:25 NB-Andy kernel: Enabling non-boot CPUs ...
Aug 06 01:05:25 NB-Andy kernel: x86: Booting SMP configuration:
Aug 06 01:05:25 NB-Andy kernel: smpboot: Booting Node 0 Processor 1 APIC 0x1
Aug 06 01:05:25 NB-Andy kernel: Disabled fast string operations
Aug 06 01:05:25 NB-Andy kernel:  cache: parent cpu1 should not be sleeping
Aug 06 01:05:25 NB-Andy kernel: CPU1 is up
Aug 06 01:05:25 NB-Andy kernel: smpboot: Booting Node 0 Processor 2 APIC 0x2
Aug 06 01:05:25 NB-Andy kernel: Disabled fast string operations
Aug 06 01:05:25 NB-Andy kernel:  cache: parent cpu2 should not be sleeping
Aug 06 01:05:25 NB-Andy kernel: CPU2 is up
Aug 06 01:05:25 NB-Andy kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Aug 06 01:05:25 NB-Andy kernel: Disabled fast string operations
Aug 06 01:05:25 NB-Andy kernel:  cache: parent cpu3 should not be sleeping
Aug 06 01:05:25 NB-Andy kernel: CPU3 is up
Aug 06 01:05:25 NB-Andy kernel: ACPI: Waking up from system sleep state S3
Aug 06 01:05:25 NB-Andy kernel: sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
Aug 06 01:05:25 NB-Andy kernel: ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
Aug 06 01:05:25 NB-Andy kernel: ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
Aug 06 01:05:25 NB-Andy kernel: PM: noirq resume of devices complete after 17.685 msecs
Aug 06 01:05:25 NB-Andy kernel: PM: early resume of devices complete after 0.600 msecs
Aug 06 01:05:25 NB-Andy kernel: e1000e 0000:00:19.0: System wakeup disabled by ACPI
Aug 06 01:05:25 NB-Andy kernel: iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
Aug 06 01:05:25 NB-Andy kernel: rtc_cmos 00:02: System wakeup disabled by ACPI
Aug 06 01:05:25 NB-Andy kernel: sd 0:0:0:0: [sda] Starting disk
Aug 06 01:05:25 NB-Andy kernel: sd 4:0:0:0: [sdb] Starting disk
Aug 06 01:05:25 NB-Andy kernel: usb 2-1.4: reset high-speed USB device number 3 using ehci-pci
Aug 06 01:05:25 NB-Andy kernel: usb 1-1.5: reset high-speed USB device number 3 using ehci-pci
Aug 06 01:05:25 NB-Andy kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Aug 06 01:05:25 NB-Andy kernel: ata4: SATA link down (SStatus 0 SControl 300)
Aug 06 01:05:25 NB-Andy kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 06 01:05:25 NB-Andy kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 06 01:05:25 NB-Andy kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Aug 06 01:05:25 NB-Andy kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Aug 06 01:05:25 NB-Andy kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Aug 06 01:05:25 NB-Andy kernel: ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Aug 06 01:05:25 NB-Andy kernel: ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Aug 06 01:05:25 NB-Andy kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Aug 06 01:05:25 NB-Andy kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Aug 06 01:05:25 NB-Andy kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Aug 06 01:05:25 NB-Andy kernel: ata1.00: configured for UDMA/133
Aug 06 01:05:25 NB-Andy kernel: ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Aug 06 01:05:25 NB-Andy kernel: ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Aug 06 01:05:25 NB-Andy kernel: ata5.00: configured for UDMA/100
Aug 06 01:05:25 NB-Andy kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
Aug 06 01:05:25 NB-Andy kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
Aug 06 01:05:25 NB-Andy kernel: ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Aug 06 01:05:25 NB-Andy kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
Aug 06 01:05:25 NB-Andy kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
Aug 06 01:05:25 NB-Andy kernel: ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Aug 06 01:05:25 NB-Andy kernel: ata2.00: configured for UDMA/66
Aug 06 01:05:25 NB-Andy kernel: usb 1-1.5.5: reset high-speed USB device number 9 using ehci-pci
Aug 06 01:05:25 NB-Andy kernel: psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
Aug 06 01:05:25 NB-Andy kernel: usb 1-1.5.2: reset low-speed USB device number 4 using ehci-pci
Aug 06 01:05:25 NB-Andy kernel: PM: resume of devices complete after 1266.028 msecs
Aug 06 01:05:25 NB-Andy kernel: PM: Finishing wakeup.
Aug 06 01:05:25 NB-Andy kernel: Restarting tasks ... done.
Aug 06 01:05:25 NB-Andy kernel: video LNXVIDEO:00: Restoring backlight state
Aug 06 01:05:25 NB-Andy systemd[1]: Time has been changed
Aug 06 01:05:25 NB-Andy plasmashell[679]: Time engine Clock skew signaled
Aug 06 01:05:25 NB-Andy systemd[553]: Time has been changed
Aug 06 01:05:25 NB-Andy NetworkManager[337]: <info>  [1470438325.7272] device (enp0s25): link disconnected (deferring action for 4 seconds)
Aug 06 01:05:25 NB-Andy kscreenlocker_greet[19074]: Time engine Clock skew signaled
Aug 06 01:05:25 NB-Andy systemd-sleep[19481]: System resumed.
Aug 06 01:05:25 NB-Andy systemd[1]: Started Suspend.
Aug 06 01:05:25 NB-Andy systemd[1]: sleep.target: Unit not needed anymore. Stopping.
Aug 06 01:05:25 NB-Andy systemd[1]: Stopped target Sleep.
Aug 06 01:05:25 NB-Andy systemd[1]: Reached target Suspend.
Aug 06 01:05:25 NB-Andy systemd-logind[317]: Operation 'sleep' finished.
Aug 06 01:05:25 NB-Andy systemd[1]: suspend.target: Unit is bound to inactive unit systemd-suspend.service. Stopping, too.
Aug 06 01:05:25 NB-Andy systemd[1]: Stopped target Suspend.
Aug 06 01:05:25 NB-Andy NetworkManager[337]: <info>  [1470438325.7660] manager: wake requested (sleeping: yes  enabled: yes)
Aug 06 01:05:25 NB-Andy NetworkManager[337]: <info>  [1470438325.7660] manager: waking up...
Aug 06 01:05:25 NB-Andy NetworkManager[337]: <info>  [1470438325.7661] device (enp0s25): state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Aug 06 01:05:25 NB-Andy kdeinit5[611]: bluedevil: About to resume
[...]
Aug 06 01:05:29 NB-Andy kdeinit5[611]: plasma-nm: Not emitting conection activated notification as the connection was active prior to suspend

Offline

Board footer

Powered by FluxBB