You are not logged in.
Greetings!
I'm in the midst of my first Arch installation, and I seem to be having a problem getting Cinnamon to run with hardware acceleration. When I select Cinnamon and try to log in, the screen goes blank then I end up back at the login screen, but I can log in just fine using software rendering mode. I've installed the nvidia drivers, cinnamon and lightdm (couldn't get gdm to work) and set up /etc/X11/xorg.conf. I used glxinfo to verify the correct proprietary driver is being used. I've spent some time on google looking for resolutions, but I haven't come up with anything.
I'm not sure what you guys need from me in order to give me a hand, but let me know and I'll provide what I can. Thanks in advance.
Last edited by Cain05 (2016-08-13 02:13:15)
Offline
Try by not using an xorg.conf.
Offline
Not having an xorg.conf actually seems to cause more issues, and from past experience, I need it in order to get certain things set up correctly for gaming. Either way, I have the same problem with or without xorg.conf. Maybe I should try to get gdm working again, or maybe try mdm which is what Mint uses by default. When I tried gdm, all I would get is a blank screen, so I wasn't able to try an log in.
Edit 2: Ok I got gdm up and running, but I get the same problem, I can only log in in software rendering mode. Seems to be an issue with cinnamon. I checked cinnamon's log files, and I didn't see anything there that would point me in the right direction.
Last edited by Cain05 (2016-08-11 11:03:28)
Offline
Can you please post your xorg.log plus the xorg.conf if you are using it.
Offline
Here you go.
xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 367.35 (builduser@rw) Fri Jul 15 21:07:27 CEST 2016
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 367.35 (buildmeister@swio-display-x64-rhel04-01) Mon Jul 11 23:51:45 PDT 2016
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ XL2411Z"
HorizSync 30.0 - 160.0
VertRefresh 56.0 - 144.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 970"
Option "TripleBuffer" "True"
Option "RegistryDwords" "PowerMizerEnable=0x01; PerLevelSrc=02222; PowerMizerDefault=0x1; PowerMizerDefaultAC=0x01"
EndSection
Section "Screen"
# Removed Option "metamodes" "DVI-I-1: 1920x1080_144 +0+0, DVI-D-0: nvidia-auto-select +1920+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-0"
Option "metamodes" "DVI-I-1: 1920x1080_144 +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Xorg.0.log
[ 13.561] (--) Log file renamed from "/var/log/Xorg.pid-475.log" to "/var/log/Xorg.0.log"
[ 13.563]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 13.563] X Protocol Version 11, Revision 0
[ 13.563] Build Operating System: Linux 4.5.4-1-ARCH x86_64
[ 13.563] Current Operating System: Linux cain 4.6.4-1-ARCH #1 SMP PREEMPT Mon Jul 11 19:12:32 CEST 2016 x86_64
[ 13.563] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7e56c8bf-9984-4a46-aa69-d848261a943f rw
[ 13.563] Build Date: 19 July 2016 05:54:24PM
[ 13.563]
[ 13.563] Current version of pixman: 0.34.0
[ 13.563] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.563] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.563] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 11 15:51:31 2016
[ 13.564] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.564] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.565] (==) ServerLayout "Layout0"
[ 13.565] (**) |-->Screen "Screen0" (0)
[ 13.565] (**) | |-->Monitor "Monitor0"
[ 13.566] (**) | |-->Device "Device0"
[ 13.566] (**) |-->Input Device "Keyboard0"
[ 13.566] (**) |-->Input Device "Mouse0"
[ 13.566] (**) Option "Xinerama" "0"
[ 13.566] (==) Automatically adding devices
[ 13.566] (==) Automatically enabling devices
[ 13.566] (==) Automatically adding GPU devices
[ 13.566] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13.567] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 13.567] Entry deleted from font path.
[ 13.567] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.567] Entry deleted from font path.
[ 13.567] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.567] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.567] Entry deleted from font path.
[ 13.567] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.567] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 13.567] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.567] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.567] (WW) Disabling Keyboard0
[ 13.567] (WW) Disabling Mouse0
[ 13.568] (II) Loader magic: 0x821d40
[ 13.568] (II) Module ABI versions:
[ 13.568] X.Org ANSI C Emulation: 0.4
[ 13.568] X.Org Video Driver: 20.0
[ 13.568] X.Org XInput driver : 22.1
[ 13.568] X.Org Server Extension : 9.0
[ 13.568] (++) using VT number 1
[ 13.569] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 13.570] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 13.570] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 13.571] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.571] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 13.572] (--) PCI: (0:0:2:0) 8086:0112:1458:d000 rev 9, Mem @ 0xfb400000/4194304, 0xe0000000/268435456, I/O @ 0x0000ff00/64
[ 13.572] (--) PCI:*(0:1:0:0) 10de:13c2:1462:3160 rev 161, Mem @ 0xf9000000/16777216, 0xc0000000/268435456, 0xde000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/131072
[ 13.572] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.572] (II) LoadModule: "glx"
[ 13.574] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.643] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.643] compiled for 4.0.2, module version = 1.0.0
[ 13.643] Module class: X.Org Server Extension
[ 13.644] (II) NVIDIA GLX Module 367.35 Mon Jul 11 22:39:07 PDT 2016
[ 13.644] (II) LoadModule: "nvidia"
[ 13.645] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.652] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.652] compiled for 4.0.2, module version = 1.0.0
[ 13.652] Module class: X.Org Video Driver
[ 13.653] (II) NVIDIA dlloader X Driver 367.35 Mon Jul 11 22:14:48 PDT 2016
[ 13.653] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.654] (II) systemd-logind: releasing fd for 226:1
[ 13.655] (II) Loading sub module "fb"
[ 13.655] (II) LoadModule: "fb"
[ 13.656] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.657] (II) Module fb: vendor="X.Org Foundation"
[ 13.657] compiled for 1.18.4, module version = 1.0.0
[ 13.657] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.657] (II) Loading sub module "wfb"
[ 13.657] (II) LoadModule: "wfb"
[ 13.658] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.659] (II) Module wfb: vendor="X.Org Foundation"
[ 13.659] compiled for 1.18.4, module version = 1.0.0
[ 13.659] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.659] (II) Loading sub module "ramdac"
[ 13.659] (II) LoadModule: "ramdac"
[ 13.659] (II) Module "ramdac" already built-in
[ 13.661] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.661] (==) NVIDIA(0): RGB weight 888
[ 13.661] (==) NVIDIA(0): Default visual is TrueColor
[ 13.661] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.663] (**) NVIDIA(0): Option "Stereo" "0"
[ 13.663] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 13.663] (**) NVIDIA(0): Option "SLI" "Off"
[ 13.663] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 13.663] (**) NVIDIA(0): Option "TripleBuffer" "True"
[ 13.663] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 13.663] (**) NVIDIA(0): Stereo disabled by request
[ 13.663] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 13.663] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 13.663] (**) NVIDIA(0): Option "MetaModes" "DVI-I-1: 1920x1080_144 +0+0"
[ 13.663] (**) NVIDIA(0): Option "RegistryDwords" "PowerMizerEnable=0x01; PerLevelSrc=02222; PowerMizerDefault=0x1; PowerMizerDefaultAC=0x01"
[ 13.663] (**) NVIDIA(0): Enabling 2D acceleration
[ 14.396] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 14.396] (--) NVIDIA(0): CRT-0
[ 14.396] (--) NVIDIA(0): DFP-0 (boot)
[ 14.396] (--) NVIDIA(0): DFP-1
[ 14.396] (--) NVIDIA(0): DFP-2
[ 14.396] (--) NVIDIA(0): DFP-3
[ 14.396] (--) NVIDIA(0): DFP-4
[ 14.426] (--) NVIDIA(0): CRT-0: disconnected
[ 14.426] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 14.426] (--) NVIDIA(0):
[ 14.486] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): connected
[ 14.486] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 14.486] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 14.486] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 14.486] (--) NVIDIA(0):
[ 14.486] (--) NVIDIA(0): DFP-1: disconnected
[ 14.486] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 14.486] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 14.486] (--) NVIDIA(0):
[ 14.486] (--) NVIDIA(0): DFP-2: disconnected
[ 14.486] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[ 14.486] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[ 14.486] (--) NVIDIA(0):
[ 14.486] (--) NVIDIA(0): DFP-3: disconnected
[ 14.486] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 14.486] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 14.486] (--) NVIDIA(0):
[ 14.516] (--) NVIDIA(0): Samsung SMBX2250 (DFP-4): connected
[ 14.516] (--) NVIDIA(0): Samsung SMBX2250 (DFP-4): Internal TMDS
[ 14.516] (--) NVIDIA(0): Samsung SMBX2250 (DFP-4): 600.0 MHz maximum pixel clock
[ 14.516] (--) NVIDIA(0):
[ 14.517] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:1:0:0 (GPU-0)
[ 14.517] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 14.517] (--) NVIDIA(0): VideoBIOS: 84.04.36.00.f1
[ 14.517] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 14.517] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.517] (**) NVIDIA(0): device BenQ XL2411Z (DFP-0) (Using EDID frequencies has
[ 14.517] (**) NVIDIA(0): been enabled on all display devices.)
[ 14.519] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.519] (**) NVIDIA(0): device Samsung SMBX2250 (DFP-4) (Using EDID frequencies
[ 14.519] (**) NVIDIA(0): has been enabled on all display devices.)
[ 14.521] (II) NVIDIA(0): Validated MetaModes:
[ 14.521] (II) NVIDIA(0): "DVI-I-1:1920x1080_144+0+0"
[ 14.521] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 14.527] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 14.527] (--) NVIDIA(0): option
[ 14.527] (--) Depth 24 pixmap format is 32 bpp
[ 14.528] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[ 14.528] (II) NVIDIA: access.
[ 14.530] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14.530] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 14.530] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 14.530] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 14.530] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 14.530] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 14.530] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 14.530] (II) NVIDIA(0): Config Options in the README.
[ 14.544] (II) NVIDIA(0): Setting mode "DVI-I-1:1920x1080_144+0+0"
[ 14.583] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 14.583] (==) NVIDIA(0): Backing store enabled
[ 14.583] (==) NVIDIA(0): Silken mouse enabled
[ 14.585] (**) NVIDIA(0): DPMS enabled
[ 14.586] (II) Loading sub module "dri2"
[ 14.586] (II) LoadModule: "dri2"
[ 14.586] (II) Module "dri2" already built-in
[ 14.586] (II) NVIDIA(0): [DRI2] Setup complete
[ 14.586] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 14.586] (--) RandR disabled
[ 14.589] (II) Initializing extension GLX
[ 14.589] (II) Indirect GLX disabled.
[ 14.656] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 14.656] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.656] (II) LoadModule: "evdev"
[ 14.656] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.657] (II) Module evdev: vendor="X.Org Foundation"
[ 14.657] compiled for 1.18.3, module version = 2.10.3
[ 14.657] Module class: X.Org XInput Driver
[ 14.657] ABI class: X.Org XInput driver, version 22.1
[ 14.658] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 30 paused 0
[ 14.658] (II) Using input driver 'evdev' for 'Power Button'
[ 14.658] (**) Power Button: always reports core events
[ 14.658] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 14.658] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.658] (--) evdev: Power Button: Found keys
[ 14.658] (II) evdev: Power Button: Configuring as keyboard
[ 14.658] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[ 14.658] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.658] (**) Option "xkb_rules" "evdev"
[ 14.658] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 14.658] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.659] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 31 paused 0
[ 14.659] (II) Using input driver 'evdev' for 'Power Button'
[ 14.659] (**) Power Button: always reports core events
[ 14.659] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 14.659] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.659] (--) evdev: Power Button: Found keys
[ 14.659] (II) evdev: Power Button: Configuring as keyboard
[ 14.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event5"
[ 14.659] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 14.659] (**) Option "xkb_rules" "evdev"
[ 14.660] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 14.660] (II) No input driver specified, ignoring this device.
[ 14.660] (II) This device may have been added with another device file.
[ 14.660] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[ 14.660] (II) No input driver specified, ignoring this device.
[ 14.660] (II) This device may have been added with another device file.
[ 14.660] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event19)
[ 14.660] (II) No input driver specified, ignoring this device.
[ 14.660] (II) This device may have been added with another device file.
[ 14.660] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event20)
[ 14.660] (II) No input driver specified, ignoring this device.
[ 14.660] (II) This device may have been added with another device file.
[ 14.661] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 14.661] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 14.662] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
[ 14.662] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 14.662] (**) Logitech USB Receiver: always reports core events
[ 14.662] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[ 14.662] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 14.662] (--) evdev: Logitech USB Receiver: Found keys
[ 14.662] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 14.662] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.5/5-1.5:1.0/0003:046D:C517.0001/input/input1/event0"
[ 14.662] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[ 14.662] (**) Option "xkb_rules" "evdev"
[ 14.663] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 14.663] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 14.663] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 14.664] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
[ 14.664] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 14.664] (**) Logitech USB Receiver: always reports core events
[ 14.664] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 14.664] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 14.664] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 14.664] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 14.664] (--) evdev: Logitech USB Receiver: Found relative axes
[ 14.664] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 14.664] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 14.664] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 14.664] (--) evdev: Logitech USB Receiver: Found keys
[ 14.664] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 14.664] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 14.664] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 14.664] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 14.664] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.664] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.5/5-1.5:1.1/0003:046D:C517.0002/input/input2/event1"
[ 14.664] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 14.664] (**) Option "xkb_rules" "evdev"
[ 14.664] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 14.664] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 14.664] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 14.664] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 14.664] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 14.664] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 14.665] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 14.665] (II) No input driver specified, ignoring this device.
[ 14.665] (II) This device may have been added with another device file.
[ 14.665] (II) config/udev: Adding input device Corsair Corsair Vengeance M60 Mouse (/dev/input/event2)
[ 14.665] (**) Corsair Corsair Vengeance M60 Mouse: Applying InputClass "evdev pointer catchall"
[ 14.716] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 34 paused 0
[ 14.717] (II) Using input driver 'evdev' for 'Corsair Corsair Vengeance M60 Mouse'
[ 14.717] (**) Corsair Corsair Vengeance M60 Mouse: always reports core events
[ 14.717] (**) evdev: Corsair Corsair Vengeance M60 Mouse: Device: "/dev/input/event2"
[ 14.717] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Vendor 0x1b1c Product 0x1b30
[ 14.717] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found 20 mouse buttons
[ 14.717] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found scroll wheel(s)
[ 14.717] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found relative axes
[ 14.717] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found x and y relative axes
[ 14.717] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Configuring as mouse
[ 14.717] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Adding scrollwheel support
[ 14.717] (**) evdev: Corsair Corsair Vengeance M60 Mouse: YAxisMapping: buttons 4 and 5
[ 14.717] (**) evdev: Corsair Corsair Vengeance M60 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.717] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.6/5-1.6:1.0/0003:1B1C:1B30.0005/input/input3/event2"
[ 14.717] (II) XINPUT: Adding extended input device "Corsair Corsair Vengeance M60 Mouse" (type: MOUSE, id 10)
[ 14.717] (II) evdev: Corsair Corsair Vengeance M60 Mouse: initialized for relative axes.
[ 14.717] (**) Corsair Corsair Vengeance M60 Mouse: (accel) keeping acceleration scheme 1
[ 14.717] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration profile 0
[ 14.717] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration factor: 2.000
[ 14.717] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration threshold: 4
[ 14.718] (II) config/udev: Adding input device Corsair Corsair Vengeance M60 Mouse (/dev/input/mouse1)
[ 14.718] (II) No input driver specified, ignoring this device.
[ 14.718] (II) This device may have been added with another device file.
[ 14.718] (II) config/udev: Adding input device Corsair Corsair Vengeance M60 Mouse (/dev/input/event3)
[ 14.718] (**) Corsair Corsair Vengeance M60 Mouse: Applying InputClass "evdev keyboard catchall"
[ 14.719] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 35 paused 0
[ 14.719] (II) Using input driver 'evdev' for 'Corsair Corsair Vengeance M60 Mouse'
[ 14.719] (**) Corsair Corsair Vengeance M60 Mouse: always reports core events
[ 14.719] (**) evdev: Corsair Corsair Vengeance M60 Mouse: Device: "/dev/input/event3"
[ 14.719] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Vendor 0x1b1c Product 0x1b30
[ 14.719] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found keys
[ 14.719] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Configuring as keyboard
[ 14.719] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.6/5-1.6:1.1/0003:1B1C:1B30.0006/input/input4/event3"
[ 14.719] (II) XINPUT: Adding extended input device "Corsair Corsair Vengeance M60 Mouse" (type: KEYBOARD, id 11)
[ 14.719] (**) Option "xkb_rules" "evdev"
[ 14.720] (II) config/udev: Adding input device Corsair Corsair Vengeance M60 Mouse (/dev/input/event4)
[ 14.720] (**) Corsair Corsair Vengeance M60 Mouse: Applying InputClass "evdev keyboard catchall"
[ 14.721] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
[ 14.721] (II) Using input driver 'evdev' for 'Corsair Corsair Vengeance M60 Mouse'
[ 14.721] (**) Corsair Corsair Vengeance M60 Mouse: always reports core events
[ 14.721] (**) evdev: Corsair Corsair Vengeance M60 Mouse: Device: "/dev/input/event4"
[ 14.721] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Vendor 0x1b1c Product 0x1b30
[ 14.721] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found 1 mouse buttons
[ 14.721] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found scroll wheel(s)
[ 14.721] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found relative axes
[ 14.721] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Forcing relative x/y axes to exist.
[ 14.721] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found absolute axes
[ 14.721] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Forcing absolute x/y axes to exist.
[ 14.721] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found keys
[ 14.721] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Configuring as mouse
[ 14.721] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Configuring as keyboard
[ 14.721] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Adding scrollwheel support
[ 14.722] (**) evdev: Corsair Corsair Vengeance M60 Mouse: YAxisMapping: buttons 4 and 5
[ 14.722] (**) evdev: Corsair Corsair Vengeance M60 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.722] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.6/5-1.6:1.2/0003:1B1C:1B30.0007/input/input5/event4"
[ 14.722] (II) XINPUT: Adding extended input device "Corsair Corsair Vengeance M60 Mouse" (type: KEYBOARD, id 12)
[ 14.722] (**) Option "xkb_rules" "evdev"
[ 14.722] (II) evdev: Corsair Corsair Vengeance M60 Mouse: initialized for relative axes.
[ 14.722] (WW) evdev: Corsair Corsair Vengeance M60 Mouse: ignoring absolute axes.
[ 14.722] (**) Corsair Corsair Vengeance M60 Mouse: (accel) keeping acceleration scheme 1
[ 14.722] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration profile 0
[ 14.722] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration factor: 2.000
[ 14.722] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration threshold: 4
[ 14.722] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 14.722] (II) No input driver specified, ignoring this device.
[ 14.722] (II) This device may have been added with another device file.
[ 14.723] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 14.723] (II) No input driver specified, ignoring this device.
[ 14.723] (II) This device may have been added with another device file.
[ 14.723] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 14.723] (II) No input driver specified, ignoring this device.
[ 14.723] (II) This device may have been added with another device file.
[ 14.724] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[ 14.724] (II) No input driver specified, ignoring this device.
[ 14.724] (II) This device may have been added with another device file.
[ 14.724] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[ 14.724] (II) No input driver specified, ignoring this device.
[ 14.724] (II) This device may have been added with another device file.
[ 14.724] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event14)
[ 14.724] (II) No input driver specified, ignoring this device.
[ 14.724] (II) This device may have been added with another device file.
[ 14.725] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 14.725] (II) No input driver specified, ignoring this device.
[ 14.725] (II) This device may have been added with another device file.
[ 14.725] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 14.725] (II) No input driver specified, ignoring this device.
[ 14.725] (II) This device may have been added with another device file.
[ 14.725] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 14.725] (II) No input driver specified, ignoring this device.
[ 14.725] (II) This device may have been added with another device file.
[ 14.726] (II) config/udev: Adding input device Logitech Gamepad F710 (/dev/input/event21)
[ 14.726] (II) No input driver specified, ignoring this device.
[ 14.726] (II) This device may have been added with another device file.
[ 14.726] (II) config/udev: Adding input device Logitech Gamepad F710 (/dev/input/js0)
[ 14.726] (II) No input driver specified, ignoring this device.
[ 14.726] (II) This device may have been added with another device file.
[ 14.727] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 14.727] (II) No input driver specified, ignoring this device.
[ 14.727] (II) This device may have been added with another device file.
[ 15.007] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 15.007] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 15.007] (--) NVIDIA(GPU-0):
[ 15.067] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 15.067] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 15.067] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 15.067] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 15.067] (--) NVIDIA(GPU-0):
[ 15.067] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 15.067] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 15.067] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 15.067] (--) NVIDIA(GPU-0):
[ 15.067] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 15.067] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 15.067] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 15.067] (--) NVIDIA(GPU-0):
[ 15.067] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 15.067] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 15.067] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 15.067] (--) NVIDIA(GPU-0):
[ 15.097] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): connected
[ 15.097] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): Internal TMDS
[ 15.097] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): 600.0 MHz maximum pixel clock
[ 15.097] (--) NVIDIA(GPU-0):
[ 15.180] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 15.249] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-1: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 19.274] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 19.274] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 19.274] (--) NVIDIA(GPU-0):
[ 19.334] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 19.334] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 19.334] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 19.334] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 19.334] (--) NVIDIA(GPU-0):
[ 19.334] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 19.334] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 19.334] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 19.334] (--) NVIDIA(GPU-0):
[ 19.334] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 19.334] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 19.334] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 19.334] (--) NVIDIA(GPU-0):
[ 19.334] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 19.334] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 19.334] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 19.334] (--) NVIDIA(GPU-0):
[ 19.364] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): connected
[ 19.364] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): Internal TMDS
[ 19.364] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): 600.0 MHz maximum pixel clock
Xorg.0.log.old
[ 13.975] (--) Log file renamed from "/var/log/Xorg.pid-473.log" to "/var/log/Xorg.0.log"
[ 13.977]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 13.977] X Protocol Version 11, Revision 0
[ 13.977] Build Operating System: Linux 4.5.4-1-ARCH x86_64
[ 13.977] Current Operating System: Linux cain 4.6.4-1-ARCH #1 SMP PREEMPT Mon Jul 11 19:12:32 CEST 2016 x86_64
[ 13.977] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7e56c8bf-9984-4a46-aa69-d848261a943f rw
[ 13.977] Build Date: 19 July 2016 05:54:24PM
[ 13.977]
[ 13.977] Current version of pixman: 0.34.0
[ 13.977] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.977] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.977] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 11 12:03:09 2016
[ 13.978] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.978] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.979] (==) ServerLayout "Layout0"
[ 13.979] (**) |-->Screen "Screen0" (0)
[ 13.979] (**) | |-->Monitor "Monitor0"
[ 13.980] (**) | |-->Device "Device0"
[ 13.980] (**) |-->Input Device "Keyboard0"
[ 13.980] (**) |-->Input Device "Mouse0"
[ 13.980] (**) Option "Xinerama" "0"
[ 13.980] (==) Automatically adding devices
[ 13.980] (==) Automatically enabling devices
[ 13.980] (==) Automatically adding GPU devices
[ 13.980] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13.981] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 13.981] Entry deleted from font path.
[ 13.981] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.981] Entry deleted from font path.
[ 13.981] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.981] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.981] Entry deleted from font path.
[ 13.981] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.981] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 13.981] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.981] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.981] (WW) Disabling Keyboard0
[ 13.981] (WW) Disabling Mouse0
[ 13.982] (II) Loader magic: 0x821d40
[ 13.982] (II) Module ABI versions:
[ 13.982] X.Org ANSI C Emulation: 0.4
[ 13.982] X.Org Video Driver: 20.0
[ 13.982] X.Org XInput driver : 22.1
[ 13.982] X.Org Server Extension : 9.0
[ 13.982] (++) using VT number 1
[ 13.984] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 13.984] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 13.984] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 13.984] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.985] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 13.986] (--) PCI: (0:0:2:0) 8086:0112:1458:d000 rev 9, Mem @ 0xfb400000/4194304, 0xe0000000/268435456, I/O @ 0x0000ff00/64
[ 13.986] (--) PCI:*(0:1:0:0) 10de:13c2:1462:3160 rev 161, Mem @ 0xf9000000/16777216, 0xc0000000/268435456, 0xde000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/131072
[ 13.986] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.986] (II) LoadModule: "glx"
[ 13.988] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.056] (II) Module glx: vendor="NVIDIA Corporation"
[ 14.056] compiled for 4.0.2, module version = 1.0.0
[ 14.056] Module class: X.Org Server Extension
[ 14.057] (II) NVIDIA GLX Module 367.35 Mon Jul 11 22:39:07 PDT 2016
[ 14.057] (II) LoadModule: "nvidia"
[ 14.058] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.065] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.065] compiled for 4.0.2, module version = 1.0.0
[ 14.066] Module class: X.Org Video Driver
[ 14.066] (II) NVIDIA dlloader X Driver 367.35 Mon Jul 11 22:14:48 PDT 2016
[ 14.066] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.067] (II) systemd-logind: releasing fd for 226:1
[ 14.069] (II) Loading sub module "fb"
[ 14.069] (II) LoadModule: "fb"
[ 14.069] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.071] (II) Module fb: vendor="X.Org Foundation"
[ 14.071] compiled for 1.18.4, module version = 1.0.0
[ 14.071] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.071] (II) Loading sub module "wfb"
[ 14.071] (II) LoadModule: "wfb"
[ 14.071] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14.073] (II) Module wfb: vendor="X.Org Foundation"
[ 14.073] compiled for 1.18.4, module version = 1.0.0
[ 14.073] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.073] (II) Loading sub module "ramdac"
[ 14.073] (II) LoadModule: "ramdac"
[ 14.073] (II) Module "ramdac" already built-in
[ 14.075] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 14.075] (==) NVIDIA(0): RGB weight 888
[ 14.075] (==) NVIDIA(0): Default visual is TrueColor
[ 14.075] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.077] (**) NVIDIA(0): Option "Stereo" "0"
[ 14.077] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 14.077] (**) NVIDIA(0): Option "SLI" "Off"
[ 14.077] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 14.077] (**) NVIDIA(0): Option "TripleBuffer" "True"
[ 14.077] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 14.077] (**) NVIDIA(0): Stereo disabled by request
[ 14.077] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 14.077] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 14.077] (**) NVIDIA(0): Option "MetaModes" "DVI-I-1: 1920x1080_144 +0+0"
[ 14.077] (**) NVIDIA(0): Option "RegistryDwords" "PowerMizerEnable=0x01; PerLevelSrc=02222; PowerMizerDefault=0x1; PowerMizerDefaultAC=0x01"
[ 14.077] (**) NVIDIA(0): Enabling 2D acceleration
[ 14.787] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 14.787] (--) NVIDIA(0): CRT-0
[ 14.787] (--) NVIDIA(0): DFP-0 (boot)
[ 14.787] (--) NVIDIA(0): DFP-1
[ 14.787] (--) NVIDIA(0): DFP-2
[ 14.787] (--) NVIDIA(0): DFP-3
[ 14.787] (--) NVIDIA(0): DFP-4
[ 14.817] (--) NVIDIA(0): CRT-0: disconnected
[ 14.817] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 14.817] (--) NVIDIA(0):
[ 14.876] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): connected
[ 14.876] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 14.876] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 14.876] (--) NVIDIA(0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 14.876] (--) NVIDIA(0):
[ 14.876] (--) NVIDIA(0): DFP-1: disconnected
[ 14.876] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 14.876] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 14.876] (--) NVIDIA(0):
[ 14.876] (--) NVIDIA(0): DFP-2: disconnected
[ 14.876] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[ 14.876] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[ 14.876] (--) NVIDIA(0):
[ 14.877] (--) NVIDIA(0): DFP-3: disconnected
[ 14.877] (--) NVIDIA(0): DFP-3: Internal TMDS
[ 14.877] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 14.877] (--) NVIDIA(0):
[ 14.907] (--) NVIDIA(0): Samsung SMBX2250 (DFP-4): connected
[ 14.907] (--) NVIDIA(0): Samsung SMBX2250 (DFP-4): Internal TMDS
[ 14.907] (--) NVIDIA(0): Samsung SMBX2250 (DFP-4): 600.0 MHz maximum pixel clock
[ 14.907] (--) NVIDIA(0):
[ 14.908] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:1:0:0 (GPU-0)
[ 14.908] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 14.908] (--) NVIDIA(0): VideoBIOS: 84.04.36.00.f1
[ 14.908] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 14.908] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.908] (**) NVIDIA(0): device BenQ XL2411Z (DFP-0) (Using EDID frequencies has
[ 14.908] (**) NVIDIA(0): been enabled on all display devices.)
[ 14.909] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.909] (**) NVIDIA(0): device Samsung SMBX2250 (DFP-4) (Using EDID frequencies
[ 14.909] (**) NVIDIA(0): has been enabled on all display devices.)
[ 14.911] (II) NVIDIA(0): Validated MetaModes:
[ 14.911] (II) NVIDIA(0): "DVI-I-1:1920x1080_144+0+0"
[ 14.911] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 14.916] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 14.916] (--) NVIDIA(0): option
[ 14.916] (--) Depth 24 pixmap format is 32 bpp
[ 14.917] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[ 14.917] (II) NVIDIA: access.
[ 14.919] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14.919] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 14.919] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 14.919] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 14.919] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 14.919] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 14.919] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 14.919] (II) NVIDIA(0): Config Options in the README.
[ 14.931] (II) NVIDIA(0): Setting mode "DVI-I-1:1920x1080_144+0+0"
[ 14.967] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 14.967] (==) NVIDIA(0): Backing store enabled
[ 14.967] (==) NVIDIA(0): Silken mouse enabled
[ 14.969] (**) NVIDIA(0): DPMS enabled
[ 14.969] (II) Loading sub module "dri2"
[ 14.969] (II) LoadModule: "dri2"
[ 14.969] (II) Module "dri2" already built-in
[ 14.969] (II) NVIDIA(0): [DRI2] Setup complete
[ 14.969] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 14.969] (--) RandR disabled
[ 14.972] (II) Initializing extension GLX
[ 14.972] (II) Indirect GLX disabled.
[ 15.025] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 15.025] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.025] (II) LoadModule: "evdev"
[ 15.025] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.026] (II) Module evdev: vendor="X.Org Foundation"
[ 15.026] compiled for 1.18.3, module version = 2.10.3
[ 15.026] Module class: X.Org XInput Driver
[ 15.026] ABI class: X.Org XInput driver, version 22.1
[ 15.026] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 30 paused 0
[ 15.026] (II) Using input driver 'evdev' for 'Power Button'
[ 15.026] (**) Power Button: always reports core events
[ 15.026] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 15.026] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.026] (--) evdev: Power Button: Found keys
[ 15.026] (II) evdev: Power Button: Configuring as keyboard
[ 15.026] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[ 15.026] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.026] (**) Option "xkb_rules" "evdev"
[ 15.027] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 15.027] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.027] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 31 paused 0
[ 15.027] (II) Using input driver 'evdev' for 'Power Button'
[ 15.027] (**) Power Button: always reports core events
[ 15.027] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 15.027] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.027] (--) evdev: Power Button: Found keys
[ 15.027] (II) evdev: Power Button: Configuring as keyboard
[ 15.027] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event5"
[ 15.027] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 15.027] (**) Option "xkb_rules" "evdev"
[ 15.027] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 15.028] (II) No input driver specified, ignoring this device.
[ 15.028] (II) This device may have been added with another device file.
[ 15.028] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event18)
[ 15.028] (II) No input driver specified, ignoring this device.
[ 15.028] (II) This device may have been added with another device file.
[ 15.028] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event19)
[ 15.028] (II) No input driver specified, ignoring this device.
[ 15.028] (II) This device may have been added with another device file.
[ 15.028] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event20)
[ 15.028] (II) No input driver specified, ignoring this device.
[ 15.028] (II) This device may have been added with another device file.
[ 15.028] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 15.028] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 15.029] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
[ 15.029] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 15.029] (**) Logitech USB Receiver: always reports core events
[ 15.029] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[ 15.029] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 15.029] (--) evdev: Logitech USB Receiver: Found keys
[ 15.029] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 15.029] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C517.0001/input/input1/event0"
[ 15.029] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[ 15.029] (**) Option "xkb_rules" "evdev"
[ 15.029] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 15.029] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 15.029] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 15.030] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
[ 15.030] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 15.030] (**) Logitech USB Receiver: always reports core events
[ 15.030] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 15.030] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 15.030] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 15.030] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 15.030] (--) evdev: Logitech USB Receiver: Found relative axes
[ 15.030] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 15.030] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 15.030] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 15.030] (--) evdev: Logitech USB Receiver: Found keys
[ 15.030] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 15.030] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 15.030] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 15.030] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 15.030] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C517.0002/input/input2/event1"
[ 15.030] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 15.030] (**) Option "xkb_rules" "evdev"
[ 15.030] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 15.030] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 15.030] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 15.030] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 15.030] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 15.030] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 15.031] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 15.031] (II) No input driver specified, ignoring this device.
[ 15.031] (II) This device may have been added with another device file.
[ 15.031] (II) config/udev: Adding input device Corsair Corsair Vengeance M60 Mouse (/dev/input/event2)
[ 15.031] (**) Corsair Corsair Vengeance M60 Mouse: Applying InputClass "evdev pointer catchall"
[ 15.083] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 34 paused 0
[ 15.083] (II) Using input driver 'evdev' for 'Corsair Corsair Vengeance M60 Mouse'
[ 15.083] (**) Corsair Corsair Vengeance M60 Mouse: always reports core events
[ 15.083] (**) evdev: Corsair Corsair Vengeance M60 Mouse: Device: "/dev/input/event2"
[ 15.083] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Vendor 0x1b1c Product 0x1b30
[ 15.083] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found 20 mouse buttons
[ 15.083] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found scroll wheel(s)
[ 15.083] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found relative axes
[ 15.083] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found x and y relative axes
[ 15.083] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Configuring as mouse
[ 15.083] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Adding scrollwheel support
[ 15.083] (**) evdev: Corsair Corsair Vengeance M60 Mouse: YAxisMapping: buttons 4 and 5
[ 15.083] (**) evdev: Corsair Corsair Vengeance M60 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.083] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:1B1C:1B30.0005/input/input3/event2"
[ 15.083] (II) XINPUT: Adding extended input device "Corsair Corsair Vengeance M60 Mouse" (type: MOUSE, id 10)
[ 15.083] (II) evdev: Corsair Corsair Vengeance M60 Mouse: initialized for relative axes.
[ 15.083] (**) Corsair Corsair Vengeance M60 Mouse: (accel) keeping acceleration scheme 1
[ 15.084] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration profile 0
[ 15.084] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration factor: 2.000
[ 15.084] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration threshold: 4
[ 15.084] (II) config/udev: Adding input device Corsair Corsair Vengeance M60 Mouse (/dev/input/mouse1)
[ 15.084] (II) No input driver specified, ignoring this device.
[ 15.084] (II) This device may have been added with another device file.
[ 15.084] (II) config/udev: Adding input device Corsair Corsair Vengeance M60 Mouse (/dev/input/event3)
[ 15.084] (**) Corsair Corsair Vengeance M60 Mouse: Applying InputClass "evdev keyboard catchall"
[ 15.085] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 35 paused 0
[ 15.085] (II) Using input driver 'evdev' for 'Corsair Corsair Vengeance M60 Mouse'
[ 15.085] (**) Corsair Corsair Vengeance M60 Mouse: always reports core events
[ 15.085] (**) evdev: Corsair Corsair Vengeance M60 Mouse: Device: "/dev/input/event3"
[ 15.085] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Vendor 0x1b1c Product 0x1b30
[ 15.085] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found keys
[ 15.085] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Configuring as keyboard
[ 15.085] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:1B1C:1B30.0006/input/input4/event3"
[ 15.085] (II) XINPUT: Adding extended input device "Corsair Corsair Vengeance M60 Mouse" (type: KEYBOARD, id 11)
[ 15.085] (**) Option "xkb_rules" "evdev"
[ 15.086] (II) config/udev: Adding input device Corsair Corsair Vengeance M60 Mouse (/dev/input/event4)
[ 15.086] (**) Corsair Corsair Vengeance M60 Mouse: Applying InputClass "evdev keyboard catchall"
[ 15.087] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
[ 15.087] (II) Using input driver 'evdev' for 'Corsair Corsair Vengeance M60 Mouse'
[ 15.087] (**) Corsair Corsair Vengeance M60 Mouse: always reports core events
[ 15.087] (**) evdev: Corsair Corsair Vengeance M60 Mouse: Device: "/dev/input/event4"
[ 15.087] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Vendor 0x1b1c Product 0x1b30
[ 15.087] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found 1 mouse buttons
[ 15.087] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found scroll wheel(s)
[ 15.087] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found relative axes
[ 15.087] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Forcing relative x/y axes to exist.
[ 15.087] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found absolute axes
[ 15.087] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Forcing absolute x/y axes to exist.
[ 15.087] (--) evdev: Corsair Corsair Vengeance M60 Mouse: Found keys
[ 15.087] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Configuring as mouse
[ 15.087] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Configuring as keyboard
[ 15.087] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Adding scrollwheel support
[ 15.087] (**) evdev: Corsair Corsair Vengeance M60 Mouse: YAxisMapping: buttons 4 and 5
[ 15.087] (**) evdev: Corsair Corsair Vengeance M60 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.087] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.2/0003:1B1C:1B30.0007/input/input5/event4"
[ 15.087] (II) XINPUT: Adding extended input device "Corsair Corsair Vengeance M60 Mouse" (type: KEYBOARD, id 12)
[ 15.087] (**) Option "xkb_rules" "evdev"
[ 15.087] (II) evdev: Corsair Corsair Vengeance M60 Mouse: initialized for relative axes.
[ 15.087] (WW) evdev: Corsair Corsair Vengeance M60 Mouse: ignoring absolute axes.
[ 15.087] (**) Corsair Corsair Vengeance M60 Mouse: (accel) keeping acceleration scheme 1
[ 15.087] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration profile 0
[ 15.087] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration factor: 2.000
[ 15.087] (**) Corsair Corsair Vengeance M60 Mouse: (accel) acceleration threshold: 4
[ 15.088] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 15.088] (II) No input driver specified, ignoring this device.
[ 15.088] (II) This device may have been added with another device file.
[ 15.088] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 15.088] (II) No input driver specified, ignoring this device.
[ 15.088] (II) This device may have been added with another device file.
[ 15.088] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 15.088] (II) No input driver specified, ignoring this device.
[ 15.088] (II) This device may have been added with another device file.
[ 15.089] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[ 15.089] (II) No input driver specified, ignoring this device.
[ 15.089] (II) This device may have been added with another device file.
[ 15.089] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[ 15.089] (II) No input driver specified, ignoring this device.
[ 15.089] (II) This device may have been added with another device file.
[ 15.089] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event14)
[ 15.089] (II) No input driver specified, ignoring this device.
[ 15.089] (II) This device may have been added with another device file.
[ 15.089] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 15.089] (II) No input driver specified, ignoring this device.
[ 15.089] (II) This device may have been added with another device file.
[ 15.090] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 15.090] (II) No input driver specified, ignoring this device.
[ 15.090] (II) This device may have been added with another device file.
[ 15.090] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 15.090] (II) No input driver specified, ignoring this device.
[ 15.090] (II) This device may have been added with another device file.
[ 15.090] (II) config/udev: Adding input device Logitech Gamepad F710 (/dev/input/event21)
[ 15.090] (II) No input driver specified, ignoring this device.
[ 15.090] (II) This device may have been added with another device file.
[ 15.091] (II) config/udev: Adding input device Logitech Gamepad F710 (/dev/input/js0)
[ 15.091] (II) No input driver specified, ignoring this device.
[ 15.091] (II) This device may have been added with another device file.
[ 15.091] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 15.091] (II) No input driver specified, ignoring this device.
[ 15.091] (II) This device may have been added with another device file.
[ 15.370] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 15.370] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 15.370] (--) NVIDIA(GPU-0):
[ 15.430] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 15.430] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 15.430] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 15.430] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 15.430] (--) NVIDIA(GPU-0):
[ 15.430] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 15.430] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 15.430] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 15.430] (--) NVIDIA(GPU-0):
[ 15.430] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 15.430] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 15.430] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 15.430] (--) NVIDIA(GPU-0):
[ 15.430] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 15.430] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 15.430] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 15.430] (--) NVIDIA(GPU-0):
[ 15.460] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): connected
[ 15.460] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): Internal TMDS
[ 15.460] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): 600.0 MHz maximum pixel clock
[ 15.460] (--) NVIDIA(GPU-0):
[ 15.552] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 15.619] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-1: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 19.676] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 19.676] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 19.676] (--) NVIDIA(GPU-0):
[ 19.736] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): connected
[ 19.736] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): Internal TMDS
[ 19.736] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): 330.0 MHz maximum pixel clock
[ 19.736] (--) NVIDIA(GPU-0): BenQ XL2411Z (DFP-0): supports NVIDIA 3D Vision stereo.
[ 19.736] (--) NVIDIA(GPU-0):
[ 19.736] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 19.736] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 19.736] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 19.736] (--) NVIDIA(GPU-0):
[ 19.736] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 19.736] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 19.736] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 19.736] (--) NVIDIA(GPU-0):
[ 19.736] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 19.737] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 19.737] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 19.737] (--) NVIDIA(GPU-0):
[ 19.767] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): connected
[ 19.767] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): Internal TMDS
[ 19.767] (--) NVIDIA(GPU-0): Samsung SMBX2250 (DFP-4): 600.0 MHz maximum pixel clock
[ 19.767] (--) NVIDIA(GPU-0):
[ 2093.336] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Close
[ 2093.336] (II) UnloadModule: "evdev"
[ 2093.336] (II) systemd-logind: releasing fd for 13:68
[ 2093.336] (EE) systemd-logind: failed to release device: Connection was disconnected before a reply was received
[ 2093.336] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Close
[ 2093.336] (II) UnloadModule: "evdev"
[ 2093.336] (II) systemd-logind: releasing fd for 13:67
[ 2093.336] (EE) systemd-logind: failed to release device: Connection is closed
[ 2093.336] (II) evdev: Corsair Corsair Vengeance M60 Mouse: Close
[ 2093.336] (II) UnloadModule: "evdev"
[ 2093.336] (II) systemd-logind: releasing fd for 13:66
[ 2093.336] (EE) systemd-logind: failed to release device: Connection is closed
[ 2093.336] (II) evdev: Logitech USB Receiver: Close
[ 2093.336] (II) UnloadModule: "evdev"
[ 2093.336] (II) systemd-logind: releasing fd for 13:65
[ 2093.336] (EE) systemd-logind: failed to release device: Connection is closed
[ 2093.336] (II) evdev: Logitech USB Receiver: Close
[ 2093.336] (II) UnloadModule: "evdev"
[ 2093.336] (II) systemd-logind: releasing fd for 13:64
[ 2093.336] (EE) systemd-logind: failed to release device: Connection is closed
[ 2093.336] (II) evdev: Power Button: Close
[ 2093.336] (II) UnloadModule: "evdev"
[ 2093.336] (II) systemd-logind: releasing fd for 13:69
[ 2093.336] (EE) systemd-logind: failed to release device: Connection is closed
[ 2093.336] (II) evdev: Power Button: Close
[ 2093.336] (II) UnloadModule: "evdev"
[ 2093.336] (II) systemd-logind: releasing fd for 13:70
[ 2093.336] (EE) systemd-logind: failed to release device: Connection is closed
[ 2094.128] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 2094.129] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 2094.129] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 2094.129] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 2094.129] (EE) systemd-logind: ReleaseControl failed: Connection is closed
[ 2094.129] (II) Server terminated successfully (0). Closing log file.
Last edited by Cain05 (2016-08-11 15:57:12)
Offline
Cain05 thank you for the logs and config file output. Unfortunately I can not see anything in them related to the issue.
Would suggest checking with `coredumpctl` if cinnamon is crashing when you attempt to use it with hardware acceleration.
Would also suggest just as a test booting with the xorg.conf removed and only one display attached preferably using startx instead of a display manager to simplify the system as much as possible.
Offline
I ended up removing and re-installing cinnamon and it seems to be fine now.
Offline