You are not logged in.
Hello,
I am having trouble configuring my displays.
I wanted to say that the same exact configuration was working on a different machine with Arch, but I upgraded my machine (new SSD, etc), and kept the two graphics cards, so they're definitely working and compatible.
Basic Configuration:
- Freshly installed Arch
- bspwm
Here's my issue:
I have all 4 displays working, and I can even move my mouse cursor around all 4.
However, xrandr is showing two of them as 'disconnected', and I can't bring them online.
This is becoming an issue because I can't do anything with those two monitors.
Even with the menu, the bar only shows on the two 'active' monitors.
Do you guys know what's going on?
Here are the output to different commands:
lspci | grep VGA
[riceBox ~]$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1)
xrandr
[riceBox ~]$ xrandr
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.00*+
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
DVI-I-3 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.00*+
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 is not being used, but DVI-0 and 1 are plugged in, and currently working.
I can move my mouse cursor in them, but no application / windows can go in there.
dmesg | grep monitor
[riceBox ~]$ dmesg | grep monitor
[ 0.014667] CPU0: Thermal monitoring enabled (TM1)
dmesg | grep -i "dell"
[riceBox ~]$ dmesg | grep -i "dell"
[ 0.000000] DMI: Dell Inc. OptiPlex 7010/0GY6Y8, BIOS A14 06/10/2013
[ 0.000000] ACPI: RSDP 0x00000000000EE0B0 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000CC7F4080 00007C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CC7FDB58 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CC7F4188 0099CB (v02 DELL CBX3 00000022 INTL 20091112)
[ 0.000000] ACPI: APIC 0x00000000CC7FDC68 000092 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CC7FDD00 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CC7FDD48 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CC7FDE30 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.000000] ACPI: SLIC 0x00000000CC7FF7E8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 1.888393] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 2.540051] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/0003:413C:2011.0002/input/input14
[ 2.590509] hid-generic 0003:413C:2011.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1d.0-1.6.1/input0
[ 2.598567] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.1/0003:413C:2011.0003/input/input17
[ 2.650457] hid-generic 0003:413C:2011.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1d.0-1.6.1/input1
dmesg | grep -i nvidia
[riceBox ~]$ dmesg | grep -i nvidia
[ 2.584396] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.4/0000:03:00.1/sound/card2/input12
[ 2.584688] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 2.590531] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.4/0000:03:00.1/sound/card2/input13
[ 2.590667] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 49.885532] nvidia: module license 'NVIDIA' taints kernel.
[ 49.892570] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 49.892820] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[ 49.892837] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 370.23 Mon Aug 8 18:02:36 PDT 2016
[ 50.748503] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 370.23 Mon Aug 8 17:29:28 PDT 2016
[ 50.748885] nvidia-modeset: Allocated GPU:0 (GPU-4817cf53-18d9-3d66-0cbc-bd81d610a782) @ PCI:0000:01:00.0
[ 52.120433] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 52.122092] nvidia-modeset: Allocated GPU:1 (GPU-e22ef8de-1ca1-6ef0-5827-8e63a55d22f4) @ PCI:0000:03:00.0
Here's the xorg.cong, generated by nvidia-settings
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 367.35 (builduser@rw) Fri Jul 15 21:07:27 CEST 2016
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 1080
Screen 1 "Screen1" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DELL P2312H"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "DELL P2312H"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor2"
VendorName "Unknown"
ModelName "DELL P2412H"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 610"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 610"
BusID "PCI:3:0:0"
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 610"
BusID "PCI:3:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1920+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
# Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0 {rotation=left}"
# Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0 {rotation=right}; DVI-I-2: nvidia-auto-select +0+0 {rotation=right}; DVI-I-2: 1280x1024 +0+0 {rotation=right}; DVI-I-2: 1280x1024_60 +0+0 {rotation=right}; DVI-I-2: 1152x864 +0+0 {rotation=right}; DVI-I-2: 1024x768 +0+0 {rotation=right}; DVI-I-2: 1024x768_60 +0+0 {rotation=right}; DVI-I-2: 800x600 +0+0 {rotation=right}; DVI-I-2: 800x600_60 +0+0 {rotation=right}; DVI-I-2: 640x480 +0+0 {rotation=right}; DVI-I-2: 640x480_60 +0+0 {rotation=right}; DVI-I-2: nvidia-auto-select +0+0 {rotation=right, viewportin=1050x1680, viewportout=1728x1080+96+0}; DVI-I-2: nvidia-auto-select +0+0 {rotation=right, viewportin=900x1440, viewportout=1728x1080+96+0}; DVI-I-2: nvidia-auto-select +0+0 {rotation=right, viewportin=768x1366, viewportout=1920x1079+0+0}; DVI-I-2: nvidia-auto-select +0+0 {rotation=right, viewportin=800x1280, viewportout=1728x1080+96+0}; DVI-I-2: nvidia-auto-select +0+0 {rotation=right, viewportin=720x1280}"
# Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0; DVI-I-2: 1280x1024 +0+0; DVI-I-2: 1280x1024_60 +0+0; DVI-I-2: 1152x864 +0+0; DVI-I-2: 1024x768 +0+0; DVI-I-2: 1024x768_60 +0+0; DVI-I-2: 800x600 +0+0; DVI-I-2: 800x600_60 +0+0; DVI-I-2: 640x480 +0+0; DVI-I-2: 640x480_60 +0+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1680x1050, viewportout=1728x1080+96+0}; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1440x900, viewportout=1728x1080+96+0}; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1366x768, viewportout=1920x1079+0+0}; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1280x800, viewportout=1728x1080+96+0}; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1280x720}"
# Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1920+0; DVI-I-2: 1280x1024 +0+0, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: 1280x1024_60 +0+0, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: 1152x864 +0+0, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: 1024x768 +0+0, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: 1024x768_60 +0+0, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: 800x600 +0+0, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: 800x600_60 +0+0, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: 640x480 +0+0, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: 640x480_60 +0+0, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1680x1050, viewportout=1728x1080+96+0}, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1440x900, viewportout=1728x1080+96+0}, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1366x768, viewportout=1920x1079+0+0}, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1280x800, viewportout=1728x1080+96+0}, DVI-I-3: nvidia-auto-select +0+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1280x720}, DVI-I-3: nvidia-auto-select +0+0"
# Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1920+0; DVI-I-2: 1280x1024 +0+0, DVI-I-3: nvidia-auto-select +1280+0; DVI-I-2: 1280x1024_60 +0+0, DVI-I-3: nvidia-auto-select +1280+0; DVI-I-2: 1152x864 +0+0, DVI-I-3: nvidia-auto-select +1152+0; DVI-I-2: 1024x768 +0+0, DVI-I-3: nvidia-auto-select +1024+0; DVI-I-2: 1024x768_60 +0+0, DVI-I-3: nvidia-auto-select +1024+0; DVI-I-2: 800x600 +0+0, DVI-I-3: nvidia-auto-select +800+0; DVI-I-2: 800x600_60 +0+0, DVI-I-3: nvidia-auto-select +800+0; DVI-I-2: 640x480 +0+0, DVI-I-3: nvidia-auto-select +640+0; DVI-I-2: 640x480_60 +0+0, DVI-I-3: nvidia-auto-select +640+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1680x1050, viewportout=1728x1080+96+0}, DVI-I-3: nvidia-auto-select +1680+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1440x900, viewportout=1728x1080+96+0}, DVI-I-3: nvidia-auto-select +1440+0"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1920+0; DVI-I-2: 1280x1024 +0+0, DVI-I-3: nvidia-auto-select +1280+0; DVI-I-2: 1280x1024_60 +0+0, DVI-I-3: nvidia-auto-select +1280+0; DVI-I-2: 1152x864 +0+0, DVI-I-3: nvidia-auto-select +1152+0; DVI-I-2: 1024x768 +0+0, DVI-I-3: nvidia-auto-select +1024+0; DVI-I-2: 1024x768_60 +0+0, DVI-I-3: nvidia-auto-select +1024+0; DVI-I-2: 800x600 +0+0, DVI-I-3: nvidia-auto-select +800+0; DVI-I-2: 800x600_60 +0+0, DVI-I-3: nvidia-auto-select +800+0; DVI-I-2: 640x480 +0+0, DVI-I-3: nvidia-auto-select +640+0; DVI-I-2: 640x480_60 +0+0, DVI-I-3: nvidia-auto-select +640+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1680x1050, viewportout=1728x1080+96+0}, DVI-I-3: nvidia-auto-select +1680+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1440x900, viewportout=1728x1080+96+0}, DVI-I-3: nvidia-auto-select +1440+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1366x768, viewportout=1920x1079+0+0}, DVI-I-3: nvidia-auto-select +1366+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1280x800, viewportout=1728x1080+96+0}, DVI-I-3: nvidia-auto-select +1280+0; DVI-I-2: nvidia-auto-select +0+0 {viewportin=1280x720}, DVI-I-3: nvidia-auto-select +1280+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
# Removed Option "metamodes" "DVI-I-3: nvidia-auto-select +0+0"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-1"
Option "metamodes" "DVI-I-3: nvidia-auto-select +0+0 {rotation=right}; DVI-I-3: 1280x1024 +0+0 {rotation=right}; DVI-I-3: 1280x1024_60 +0+0 {rotation=right}; DVI-I-3: 1152x864 +0+0 {rotation=right}; DVI-I-3: 1024x768 +0+0 {rotation=right}; DVI-I-3: 1024x768_60 +0+0 {rotation=right}; DVI-I-3: 800x600 +0+0 {rotation=right}; DVI-I-3: 800x600_60 +0+0 {rotation=right}; DVI-I-3: 640x480 +0+0 {rotation=right}; DVI-I-3: 640x480_60 +0+0 {rotation=right}; DVI-I-3: nvidia-auto-select +0+0 {rotation=right, viewportin=1050x1680, viewportout=1728x1080+96+0}; DVI-I-3: nvidia-auto-select +0+0 {rotation=right, viewportin=900x1440, viewportout=1728x1080+96+0}; DVI-I-3: nvidia-auto-select +0+0 {rotation=right, viewportin=768x1366, viewportout=1920x1079+0+0}; DVI-I-3: nvidia-auto-select +0+0 {rotation=right, viewportin=800x1280, viewportout=1728x1080+96+0}; DVI-I-3: nvidia-auto-select +0+0 {rotation=right, viewportin=720x1280}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Edit:
I was looking at my dmesg and noticed these lines:
[ 108.262607] hid-generic 0003:0461:4E22.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[ 154.482840] nvidia: module license 'NVIDIA' taints kernel.
[ 154.482846] Disabling lock debugging due to kernel taint
[ 154.490050] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 154.490120] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 154.490228] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 154.490286] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[ 154.490298] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 370.23 Mon Aug 8 18:02:36 PDT 2016
[ 155.348528] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 370.23 Mon Aug 8 17:29:28 PDT 2016
[ 155.349020] nvidia-modeset: Allocated GPU:0 (GPU-4817cf53-18d9-3d66-0cbc-bd81d610a782) @ PCI:0000:01:00.0
[ 156.731026] NVRM: Your system is not currently configured to drive a VGA console
[ 156.731033] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 156.731045] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 156.731046] NVRM: drivers including, but not limited to, vesafb, may result in
[ 156.731047] NVRM: corruption and stability problems, and is not supported.
[ 156.732508] nvidia-modeset: Allocated GPU:1 (GPU-e22ef8de-1ca1-6ef0-5827-8e63a55d22f4) @ PCI:0000:03:00.0
Thanks in advance for helping me out
Last edited by Moussa93 (2016-08-24 18:10:53)
Offline
Nobody?
Offline