You are not logged in.

#1 2016-09-27 23:09:55

hJEwYuXfdtpZ
Member
Registered: 2016-09-26
Posts: 9

Bumblee problems

I'm having difficulty getting my second GPU to activate using optirun or primusrun. Any assistance is welcomed.

lspci

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 555M] (rev ff)
07:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57781 Gigabit Ethernet PCIe (rev 10)
08:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]
09:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
0a:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30)
0a:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30)
0a:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30)
0a:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 30)

/etc/X11/corg.conf.d/10-gpu..conf

Section "Device"
	Identifier	"Intel HD 2000 Integrated Graphics"
	Driver		"intel"
	BusID		"PCI:0:2:0"
	Option		"DRI"	"3"
	Option		"Backlight" "intel_backlight"
EndSection

Section "Device"
	Identifier	"NVIDIA GT 555M"
	Driver		"nvidia"
	BusID		"PCI:1:0:0"
EndSection

systemctl status bumblebeed

Sep 27 15:43:54 NULL systemd[1]: Started Bumblebee C Daemon.
Sep 27 15:43:54 NULL bumblebeed[564]: [   17.050020] [INFO]/usr/bin/bumblebeed 3.2.1 started
Sep 27 15:44:19 NULL bumblebeed[564]: [   42.153707] [ERROR]Could not enable discrete graphics card

Kernel parameters

(standard input):5:GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda2:root_crypt cryptkey=/dev/sdc1:ext4:/.mine/keys/root_crypt root=/dev/mapper/root_crypt resume=/dev/mapper/swap_crypt rcutree.rcu_idle_gp_delay=1"

Offline

#2 2016-09-29 19:58:52

pillowHugger95
Member
Registered: 2016-09-29
Posts: 10

Re: Bumblee problems

Just checking...

Did you follow the instructions found here:

https://wiki.archlinux.org/index.php/Bu … l.2FNVIDIA

Offline

Board footer

Powered by FluxBB