You are not logged in.

Pages: 1

#1 2016-09-28 19:08:16

razing32
Member
Registered: 2016-07-09
Posts: 33

[SOLVED]Microphone issues

Hi.
I am having issues with the front panel Microphone on my PC.
It did work before and I managed to record sound but now I cannot get it to work.
(I did manage to get a USB headset to work just fine)

I went through the troubleshooting steps and found :
[alin@localhost pulse]$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 2: ALC892 Alt Analog [ALC892 Alt Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

So i added to my config file
[alin@localhost pulse]$ cat /etc/pulse/default.pa | grep "device=hw"
#load-module module-alsa-source device=hw:1,0
load-module module-alsa-source device=hw:0,0
load-module module-alsa-source device=hw:0,2

Also boosted volume :
set-source-volume 1 300000

One other interesting aspect , if in pavucontrol I choose as fallback the device that sees front mic plugged in , Sound Recorder just freezes and I cannot kill the process even as root - have to wait for a not-responding error before I can Force quit.


http://imgur.com/a/nv3HR

Any suggestions what I should  check next ?

Last edited by razing32 (2016-10-04 18:38:59)

Offline

#2 2016-09-28 23:41:58

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,738

Re: [SOLVED]Microphone issues

revert your manual ALSA module loads, pulseaudio does that just fine usually. Try to have some application you expect to be able to record with open and then post 

amixer -c0
pacmd list-cards
pacmd list-sources
pacmd list-source-outputs
sudo fuser -v /dev/snd/*

Last edited by V1del (2016-09-29 07:38:56)

Offline

#3 2016-09-29 06:14:23

orasis
Member
Registered: 2008-03-22
Posts: 48

Re: [SOLVED]Microphone issues

PulseAudio is your problem... it is basically a problem.

Thurin1 @ irc.freenode.net #archlinux

Offline

#4 2016-09-29 07:35:10

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,738

Re: [SOLVED]Microphone issues

It isn't... Please refrain  from empty flame posts https://wiki.archlinux.org/index.php/Co … d_projects

Last edited by V1del (2016-09-29 07:36:30)

Offline

#5 2016-09-30 14:40:40

razing32
Member
Registered: 2016-07-09
Posts: 33

Re: [SOLVED]Microphone issues

V1del wrote:

revert your manual ALSA module loads, pulseaudio does that just fine usually. Try to have some application you expect to be able to record with open and then post 

amixer -c0
pacmd list-cards
pacmd list-sources
pacmd list-source-outputs
sudo fuser -v /dev/snd/*

Ok got it.
Hey , it worked just fine. I can hear my mic again smile

Here  is  the output: (if necessary)

Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 64
  Mono: Playback 54 [84%] [-10.00dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 64 [100%] [0.00dB] [on]
  Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 64 [100%] [0.00dB] [on]
  Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Front Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 1 [33%] [10.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Surround',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 0 [0%] [-64.00dB] [off]
  Front Right: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 64
  Mono: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 64
  Mono: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Side',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 0 [0%] [-64.00dB] [off]
  Front Right: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Line Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 46
  Front Left: Capture 46 [100%] [30.00dB] [on]
  Front Right: Capture 46 [100%] [30.00dB] [on]
Simple mixer control 'Capture',1
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 46
  Front Left: Capture 0 [0%] [-16.00dB] [off]
  Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'
Simple mixer control 'Digital',0
  Capabilities: cvolume
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 120
  Front Left: Capture 60 [50%] [0.00dB]
  Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Input Source',0
  Capabilities: cenum
  Items: 'Front Mic' 'Rear Mic' 'Line'
  Item0: 'Front Mic'
Simple mixer control 'Input Source',1
  Capabilities: cenum
  Items: 'Front Mic' 'Rear Mic' 'Line'
  Item0: 'Front Mic'
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'
Simple mixer control 'Rear Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Rear Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
2 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_01_00.1>
    driver: <module-alsa-card.c>
    owner module: 8
    properties:
        alsa.card = "1"
        alsa.card_name = "HDA NVidia"
        alsa.long_card_name = "HDA NVidia at 0xfe080000 irq 50"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:01:00.1"
        sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
        device.bus = "pci"
        device.vendor.id = "10de"
        device.vendor.name = "NVIDIA Corporation"
        device.product.id = "0e0a"
        device.product.name = "GK104 HDMI Audio Controller"
        device.string = "1"
        device.description = "GK104 HDMI Audio Controller"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    profiles:
        output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
        output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
        output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
        output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: unknown)
        output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: unknown)
        output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 100, available: unknown)
        output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: unknown)
        output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: unknown)
        output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: unknown)
        output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5200, available: unknown)
        output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 100, available: unknown)
        output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 100, available: unknown)
        off: Off (priority 0, available: unknown)
    active profile: <output:hdmi-stereo>
    sinks:
        alsa_output.pci-0000_01_00.1.hdmi-stereo/#0: GK104 HDMI Audio Controller Digital Stereo (HDMI)
    sources:
        alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#2: Monitor of GK104 HDMI Audio Controller Digital Stereo (HDMI)
    ports:
        hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
    index: 1
    name: <alsa_card.pci-0000_00_14.2>
    driver: <module-alsa-card.c>
    owner module: 22
    properties:
        alsa.card = "0"
        alsa.card_name = "HDA ATI SB"
        alsa.long_card_name = "HDA ATI SB at 0xfe500000 irq 16"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:14.2"
        sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
        device.bus = "pci"
        device.vendor.id = "1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "4383"
        device.product.name = "SBx00 Azalia (Intel HDA)"
        device.form_factor = "internal"
        device.string = "0"
        device.description = "Built-in Audio"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    profiles:
        input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
        output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
        output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
        output:analog-surround-21: Analog Surround 2.1 Output (priority 800, available: unknown)
        output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (priority 860, available: unknown)
        output:analog-surround-40: Analog Surround 4.0 Output (priority 700, available: unknown)
        output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 760, available: unknown)
        output:analog-surround-41: Analog Surround 4.1 Output (priority 800, available: unknown)
        output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 860, available: unknown)
        output:analog-surround-50: Analog Surround 5.0 Output (priority 700, available: unknown)
        output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 760, available: unknown)
        output:analog-surround-51: Analog Surround 5.1 Output (priority 800, available: unknown)
        output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 860, available: unknown)
        output:analog-surround-71: Analog Surround 7.1 Output (priority 700, available: unknown)
        output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (priority 760, available: unknown)
        output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown)
        output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5560, available: unknown)
        off: Off (priority 0, available: unknown)
    active profile: <output:analog-stereo+input:analog-stereo>
    sinks:
        alsa_output.pci-0000_00_14.2.analog-stereo/#1: Built-in Audio Analog Stereo
    sources:
        alsa_output.pci-0000_00_14.2.analog-stereo.monitor/#3: Monitor of Built-in Audio Analog Stereo
        alsa_input.pci-0000_00_14.2.analog-stereo/#4: Built-in Audio Analog Stereo
    ports:
        analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
            properties:
                
        analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
            properties:
                
        analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "audio-headphones"
        iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
            properties:
                
5 source(s) available.
    index: 0
    name: <alsa_input.hw_0_0>
    driver: <module-alsa-source.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE 
    priority: 9950
    volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 45874 /  70% / -9.29 dB
            balance -0.30
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: yes
    current latency: 0.00 ms
    max rewind: 0 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
    module: 5
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "ALC892 Analog"
        alsa.id = "ALC892 Analog"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "0"
        alsa.card_name = "HDA ATI SB"
        alsa.long_card_name = "HDA ATI SB at 0xfe500000 irq 16"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:14.2"
        sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
        device.bus = "pci"
        device.vendor.id = "1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "4383"
        device.product.name = "SBx00 Azalia (Intel HDA)"
        device.form_factor = "internal"
        device.string = "hw:0,0"
        device.buffering.buffer_size = "352768"
        device.buffering.fragment_size = "176384"
        device.access_mode = "mmap+timer"
        device.description = "Built-in Audio"
        device.icon_name = "audio-input-microphone-pci"
    index: 1
    name: <alsa_input.hw_0_2>
    driver: <module-alsa-source.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE 
    priority: 9950
    volume: front-left: 55696 /  85% / -4.24 dB,   front-right: 55696 /  85% / -4.24 dB
            balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: yes
    current latency: 0.00 ms
    max rewind: 0 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
    module: 6
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "ALC892 Alt Analog"
        alsa.id = "ALC892 Alt Analog"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "2"
        alsa.card = "0"
        alsa.card_name = "HDA ATI SB"
        alsa.long_card_name = "HDA ATI SB at 0xfe500000 irq 16"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:14.2"
        sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
        device.bus = "pci"
        device.vendor.id = "1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "4383"
        device.product.name = "SBx00 Azalia (Intel HDA)"
        device.form_factor = "internal"
        device.string = "hw:0,2"
        device.buffering.buffer_size = "352768"
        device.buffering.fragment_size = "176384"
        device.access_mode = "mmap+timer"
        device.description = "Built-in Audio"
        device.icon_name = "audio-input-microphone-pci"
    index: 2
    name: <alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor>
    driver: <module-alsa-card.c>
    flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE 
    priority: 1050
    volume: front-left: 300000 / 458% / 39.64 dB,   front-right: 300000 / 458% / 39.64 dB
            balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: yes
    current latency: 0.00 ms
    max rewind: 0 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
    monitor_of: 0
    card: 0 <alsa_card.pci-0000_01_00.1>
    module: 8
    properties:
        device.description = "Monitor of GK104 HDMI Audio Controller Digital Stereo (HDMI)"
        device.class = "monitor"
        alsa.card = "1"
        alsa.card_name = "HDA NVidia"
        alsa.long_card_name = "HDA NVidia at 0xfe080000 irq 50"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:01:00.1"
        sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
        device.bus = "pci"
        device.vendor.id = "10de"
        device.vendor.name = "NVIDIA Corporation"
        device.product.id = "0e0a"
        device.product.name = "GK104 HDMI Audio Controller"
        device.string = "1"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    index: 3
    name: <alsa_output.pci-0000_00_14.2.analog-stereo.monitor>
    driver: <module-alsa-card.c>
    flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE 
    priority: 1950
    volume: front-left: 300000 / 458% / 39.64 dB,   front-right: 300000 / 458% / 39.64 dB
            balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: yes
    current latency: 0.00 ms
    max rewind: 0 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
    monitor_of: 1
    card: 1 <alsa_card.pci-0000_00_14.2>
    module: 22
    properties:
        device.description = "Monitor of Built-in Audio Analog Stereo"
        device.class = "monitor"
        alsa.card = "0"
        alsa.card_name = "HDA ATI SB"
        alsa.long_card_name = "HDA ATI SB at 0xfe500000 irq 16"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:14.2"
        sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
        device.bus = "pci"
        device.vendor.id = "1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "4383"
        device.product.name = "SBx00 Azalia (Intel HDA)"
        device.form_factor = "internal"
        device.string = "0"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
  * index: 4
    name: <alsa_input.pci-0000_00_14.2.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE 
    priority: 9959
    volume: front-left: 39605 /  60% / -13.12 dB,   front-right: 29910 /  46% / -20.44 dB
            balance -0.24
    base volume: 6554 /  10% / -60.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max rewind: 0 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
    card: 1 <alsa_card.pci-0000_00_14.2>
    module: 22
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "ALC892 Analog"
        alsa.id = "ALC892 Analog"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "0"
        alsa.card_name = "HDA ATI SB"
        alsa.long_card_name = "HDA ATI SB at 0xfe500000 irq 16"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:14.2"
        sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
        device.bus = "pci"
        device.vendor.id = "1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "4383"
        device.product.name = "SBx00 Azalia (Intel HDA)"
        device.form_factor = "internal"
        device.string = "front:0"
        device.buffering.buffer_size = "352768"
        device.buffering.fragment_size = "176384"
        device.access_mode = "mmap+timer"
        device.profile.name = "analog-stereo"
        device.profile.description = "Analog Stereo"
        device.description = "Built-in Audio Analog Stereo"
        alsa.mixer_name = "Realtek ALC892"
        alsa.components = "HDA:10ec0892,104384fb,00100302"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    ports:
        analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
            properties:
                
    active port: <analog-input-front-mic>
0 source output(s) available.
   801 29596   801 29596

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  gdm       F.... pulseaudio
                     alin      F.... pulseaudio
/dev/snd/controlC1:  gdm       F.... pulseaudio
                     alin      F.... pulseaudio

Last edited by razing32 (2016-10-04 18:39:32)

Offline

#6 2016-09-30 15:18:22

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,738

Re: [SOLVED]Microphone issues

Please use [ code ] Tags when pasting command output. Well looks alright now, so if the problem is solved, edit your initial post and prepend [SOLVED] or similar to the title

Offline

#7 2016-10-04 18:39:58

razing32
Member
Registered: 2016-07-09
Posts: 33

Re: [SOLVED]Microphone issues

V1del wrote:

Please use [ code ] Tags when pasting command output. Well looks alright now, so if the problem is solved, edit your initial post and prepend [SOLVED] or similar to the title

Done.

Offline

Pages: 1

Board footer

Powered by FluxBB