Arch Linux

Dornith

Member

Registered: 2013-02-19

Posts: 78

Diskfilter writes error when installing GRUB on a raid

I'm setting up a server running Arch with two raided drives:
cat /proc/mdstat

md127 : active raid1 sda[0] sdb[1]
      976631488 blocks super 1.2 [2/2] [UU]
      bitmap"1/8 pages [4KB], 65536KB chunk

have the following partition table created with cgdisk:
gdisk /dev/md/a

Number  Start (sector) End (sector)   Size        Code    Name
1               2048         4095    1024.0 KiB   EF02    grub
2           20973568    981469183    458.0 GiB    8300    /media
3          981469184   1461716991    229.0 GiB    8300    /var
4         1461716992   1941964799    229.0 GiB    8300    /srv
5         1941964800   1942374399    200.0 MiB    8300    /boot
6         1942374400   1953262942    5.2 GiB      8300    swap
7               4096     20973567    10.0 GiB     8300    /

The command I'm running:

sh-4.3# grub-install --target=i386-pc --recheck --debug /dev/md/a
...
grub-install: error: diskfilter writes are not supported.

What should I do to fix this error?

kuklofon

Member

Registered: 2016-10-04

Posts: 1

Re: Diskfilter writes error when installing GRUB on a raid

i have the same problem... I'm doing install on fakeroot, using manual from wiki

WorMzy

Forum Moderator

From: Scotland

Registered: 2010-06-16

Posts: 11,846

Website

Re: Diskfilter writes error when installing GRUB on a raid

Please don't necrobump: https://wiki.archlinux.org/index.php/Co … bumping.22

This issue is also well documented on the internet, please search before posting.

Closing.

---

Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.